%0 Conference Proceedings %B Colloque International : Autour de l’identité numérique, les 6 et 7 Octobre %D 2019 %T Analyse discursive des caractéristiques de l’identité numérique %A GHALEM, A %B Colloque International : Autour de l’identité numérique, les 6 et 7 Octobre %C Biskra, Algerie %G eng %0 Conference Proceedings %B Journée d’étude organisée au centre universitaire de Barika, organisée le Février %D 2019 %T Apport de la Littératie médiatique multimodale à la lecture des øe}uvres littéraires numériques. L’enseignement-apprentissage des langues étrangères à l’ère du numérique %A ARRAR, S %B Journée d’étude organisée au centre universitaire de Barika, organisée le Février %C Batna, Algérie %G eng %0 Journal Article %J Para lá da tarefa: implicar os estudantes na aprendizagem de l{\'ınguas estrangeiras no ensino superior. Porto: FLUP %D 2019 %T Apprentissage du FLE en Algérie : de l’analyse des représentations à la motivation des apprenants dans le milieu universitaire %A Khadraoui, Errime %A Messaour, Riad %X La dynamique motivationnelle est-elle tributaire de l’évolution des représentations ? Quel rapport existe-t-il entre les représentations des étudiants vis-à-vis de la langue/culture fran\c caise et l’apprentissage de celle-ci ? C’est à ces questions que la présente recherche tente de répondre. Pour cela, nous avons, dans un premier temps, réalisé à travers une enquête par questionnaire, une étude comparative entre les représentations qu’ont les étudiants de première année licence du département de fran\c cais (Université de Batna 2) de la langue/culture fran\c caise au début et en fin de l’année ; notre objectif étant d’examiner l’effet de l’évolution de leurs représentations sur leurs motivations. Afin d’appuyer les résultats obtenus de l’analyse des questionnaires, nous avons, dans un second temps, effectué des entretiens semi-directifs avec leurs enseignants. Au terme de cette étude, nous avons constaté une évolution de la motivation des étudiants qui s’explique par l’évolution de leurs représentations vis-à-vis de la langue/culture cible. %B Para lá da tarefa: implicar os estudantes na aprendizagem de l{\'ınguas estrangeiras no ensino superior. Porto: FLUP %P 208-225 %G eng %U https://ler.letras.up.pt/uploads/ficheiros/17861.pdf %0 Conference Proceedings %B Colloque international organisé à l’université Tlemcen les 11 et 12 Décembre %D 2019 %T Cultures méditerranéennes manifestées dans les textes littéraires enseignés au secondaire algérien. Dynamique des langues, des discours et des cultures en contexte méditerranéen. %A ARRAR, S %B Colloque international organisé à l’université Tlemcen les 11 et 12 Décembre %C Tlemcen, Algérie %G eng %0 Journal Article %J Expressions pédagogique %D 2019 %T Didactisation du texte littéraire dans la formation des enseignants : de l'instrumentalisation á de nouvelles approches pédagogiques %A Belkacem, Mohammed-Amine %A Messaour, Riad %B Expressions pédagogique %V 4 %G eng %0 Conference Proceedings %B Colloque national organisé à l’université Blida 2 les 17 et 18 Décembre %D 2019 %T Eradiquer l’indiscipline scolaire dans les établissements éducatifs : quelles interventions pédagogiques ? Les problèmes de classe à l’école algérienne %A ARRAR, S %B Colloque national organisé à l’université Blida 2 les 17 et 18 Décembre %C Blida, Algérie %G eng %0 Conference Proceedings %B Colloque international : Communication présentée à l’université de Saint-Etienne Jean Monnet %D 2019 %T Histoire & Mémoire : La femme Chaouia, une lecture socioculturelle %A BENZAROUEL, T %B Colloque international : Communication présentée à l’université de Saint-Etienne Jean Monnet %G eng %0 Conference Proceedings %B XXVIII Colloque AFUE « Un certain regard. La langue fran\c caise comme voie pour penser, appréhender et exprimer le monde », Colloque international, Université de Madrid du 10 au 12 Avril %D 2019 %T Impact de la dimension interculturelle sur l’acquisition de la langue fran\c caise à l’ère de la nouvelle réforme éducative algérienne : défis et enjeux %A MEZIANI, A %B XXVIII Colloque AFUE « Un certain regard. La langue fran\c caise comme voie pour penser, appréhender et exprimer le monde », Colloque international, Université de Madrid du 10 au 12 Avril %G eng %0 Conference Proceedings %B Colloque International « Histoire et mémoires partagées », université Jean Monnet, Saint- Etienne, Juin %D 2019 %T Isabelle Eberhardt : Témoin d’une époque %A BENZIANE, S %B Colloque International « Histoire et mémoires partagées », université Jean Monnet, Saint- Etienne, Juin %C Saint- Etienne, France %G eng %0 Journal Article %J Expressions pédagogique %D 2019 %T L'album de jeunesse en classe de FLE : un support pour développer la compréhension de l'écrit chez les apprenants de 5 ème année primaire %A Khadraoui, Errime %A Laidoudi, Assia %B Expressions pédagogique %V 4 %G eng %0 Conference Proceedings %B Décembre %D 2019 %T La créativité au service de l’apprentissage de FLE %A BENCHERIF, S %B Décembre %C Tlemcen, Algérie %G eng %0 Journal Article %J Revue al mukhatabat %D 2019 %T la dimension pathémique dans la traduction littéraire : Traductibilité des sentiments %A Lebbal, Sara %B Revue al mukhatabat %V 29 %G eng %0 Conference Proceedings %B Journée d’étude :« Management et gestion des projets de recherche en  éducation »,Mercredi 9 Octobre 2019, INRE, El Achour. %D 2019 %T La Pédagogie de la classe inversée et l'utilisation de la carte mentale au service de l'innovation et l’efficacité dans l’école primaire en Algérie %A MOUFFOK, S %B Journée d’étude :« Management et gestion des projets de recherche en  éducation »,Mercredi 9 Octobre 2019, INRE, El Achour. %G eng %0 Journal Article %J Psychological & Educational Studies %D 2019 %T La Validité De L’évaluation Sommative:, Étude Des Situations D’intégration Du FLE Au Cycle Moyen %A Laidoudi, Assia %X La validité de l’évaluation sommative : étude des situations d’intégration du FLE au cycle moyen The validity of the summative evaluation: study of situations of integration of the French as a foreign language in the middle cycle Résumé :otre contribution porte sur la validité des situations d’intégration que les épreuves sommatives du FLE proposent au cycle moyen. Ces situations-qui évaluent la compétence rédactionnelle des apprenants-se sont avérées, suite à une étude descriptive analytique, non-conformes aux exigences de l’Approche par les Compétences, actuellement en vigueur dans notre système éducatif. En effet, ces outils évaluatifs ne comportent pas toutes les composantes essentielles des situations évaluatives et ne respectent pas la règle des 2/3, indispensable pour inférer un jugement de compétence. Abstract: Our contribution deals with the validity of the situations of integration that the summative tests of the French as a foreign language propose in the middle cycle. These situations-which assess the written competence of the learners-have proved, following an analytical descriptive study, not in conformity with the requirements of the Competence Approach, currently in force in our educational system. Indeed, these evaluative tools do not include all the essential components of evaluative situations and do not respect the rule of 2/3, essential to infer a judgment of competence. %B Psychological & Educational Studies %V 13 %G eng %U https://www.researchgate.net/publication/339413292_La_Validite_De_L’evaluation_Sommative_Etude_Des_Situations_D’integration_Du_FLE_Au_Cycle_Moyen %N 4 %0 Journal Article %J Didactiques %D 2019 %T Le développement de la compétence culturelle en classe de FLE les enseignants du cycle moyen entre théorie et pratique %A Khadraoui, Errime %A Laidoudi, Assia %X Conscients de la valeur de la compétence culturelle dans les communications langagières, certains enseignants continuent à en négliger le développement dans leurs classes de FLE où la compétence linguistique demeure privilégiée. D’autres, voulant la développer chez leurs apprenants, se limitent à évoquer la culture cultivée alors que la culture anthropologique n’est pas prise en considération. C’est ce que notre présente étude intitulée (Le développement de la compétence culturelle en classe de FLE : les enseignants du cycle moyen entre théorie et pratique) nous a révélé suite à l’analyse des questionnaires remplis par des enseignants exer\c cant au cycle moyen. %B Didactiques %V 8 %P 102-125 %G eng %U https://www.asjp.cerist.dz/en/article/112602 %N 2 %0 Journal Article %J Développement des Ressources Humaines %D 2019 %T Le manuel scolaire outil de construction de la compétence lexicale au cycle primaire : étude comparative des manuels scolaires algériens et tunisiens %A Khadraoui, Errime %A Messaour, Riad %X La présente contribution tente, à travers une démarche comparative, de sonder les contenus des manuels de FLE du cycle primaire en Algérie en les comparants à ceux de la Tunisie. Cette comparaison permettra de situer l’analyse par rapport aux standards internationaux. L’objectif de cette étude est donc de déterminer, en termes de volume (quantité), les mots que l’apprenant algérien est supposé acquérir au terme de ce premier palier. Dans cette perspective, l’étude montre que le nombre de mots proposé dans les manuels scolaires des deux contextes dépasse le seuil minimal recommandé par les chercheurs. En outre, la comparaisona révéléque les manuels tunisiens, con\c cus en fonction d’une culture universelle, comptent 642 mots de plus que les manuels algériens dont la dimension est beaucoup plus nationaliste. %B Développement des Ressources Humaines %V 10 %G eng %U https://www.asjp.cerist.dz/en/downArticle/183/14/2/104516 %N 2 %0 Journal Article %J social and human sciences review %D 2019 %T L’apport du geste pédagogique dans la compréhension de l’oral en classe de FLE (cas des apprenants de 3ème année primaire - Batna %A Leboukh, Faiza %X Partant du principe qu’il n’y a pas de personne qui ne gesticule, que l’acte pédagogique est un acte où s’entrecroisent et s’entremêlent plusieurs éléments, que le corps de l’enseignant est un outil pédagogique, tout comme sa voix, le présent article tente de mettre en exergue l’effet, l’apport et l’impact du geste sur les pratiques enseignantes en classe de FLE. Comme une véritable métaphore de pensée et un moyen fortement expressif aidant à informer, à animer et à évaluer, le geste pédagogique s’impose comme outil didactique incontournable. Indiscutablement, il favorise la motivation de l’apprenant, facilite la compréhension et la pénétration du sens et aide à l’appropriation de vocabulaire. Le but est donc de montrer les effets du geste sur la compréhension et la découverte du sens, de le considérer comme un signe, voire comme un fait communicatif qui prend une place. %B social and human sciences review %V 20 %P 565-588 %G eng %U https://www.asjp.cerist.dz/en/article/109493 %N 2 %0 Conference Proceedings %B Colloque International organisé par l’Université d’Oum El-Bouaghi %D 2019 %T L’apprentissage collaboratif en ligne : compte-rendu d’une expérience %A ALOUANE, A %B Colloque International organisé par l’Université d’Oum El-Bouaghi %C Oum El-Bouaghi, Algérie %G eng %0 Journal Article %J Pedagogy %D 2019 %T L’Approche Par les Compétences en classe de FLE %A Khadraoui, Errime %A Laidoudi, Assia %A Messaour, Riad %X Le système éducatif algérien a connu la mise en øe}uvre de plusieurs pédagogies qui ont toutes visé la formation de citoyens ouverts aux autres cultures et civilisations. Cette formation requiert l’installation de compétences effectives chez les apprenants algériens à travers les contenus proposés, les pratiques intégrées et les outils appropriés, conformément à la pédagogie en vigueur. Après le délaissement de la Pédagogie Par Objectifs, l’école algérienne a adopté l’Approche Par les Compétences (APC) dans le souci d’adapter la formation aux exigences de la vie sociale. Cette rupture avec la PPO n’est pas aisée dans la mesure où l’APC a ses propres objectifs, principes et caractéristiques que notre présente étude tente d’éclaircir. %B Pedagogy %V 1 %G eng %U https://www.researchgate.net/publication/333880986_L’Approche_Par_les_Competences_en_classe_de_FLE_Caracteristiques_objectifs_et_application %N 1 %0 Conference Proceedings %B Journée d’étude au centre universitaire de Barika %D 2019 %T L’enseignement – apprentissage des langues étrangères à l’ère numérique : TICE en classe de FLE, par où commencer ? %A BENZAROUEL, T %B Journée d’étude au centre universitaire de Barika %C Batna, Algérie %G eng %0 Conference Proceedings %B Université de Msila 03/2019 %D 2019 %T Méthodologie de recherche :le questionnement en vigueur %A SLITANE, S %B Université de Msila 03/2019 %C M’sila, Algérie %G eng %0 Conference Proceedings %B Colloque International : culture(s)et langue(s)au centre de la recherche universitaire : quelle(s)approche(s), pour quel(s)objectif(s) ? , Université de Jijel, 24 et 25 Novembre %D 2019 %T PAREMIE, LA PERILLEUSE (OU L’IMPOSSIBLE) TRADUCTION %A BOUZIDI, H %B Colloque International : culture(s)et langue(s)au centre de la recherche universitaire : quelle(s)approche(s), pour quel(s)objectif(s) ? , Université de Jijel, 24 et 25 Novembre %C Jijel, Algérie %G eng %0 Conference Proceedings %B Communication dans une journée d’étude, Barika %D 2019 %T Pour un renouvellement didactique à l’ère du numérique : un regard autre sur le smartphone en classe de FLE %A HAMAIZI, B %B Communication dans une journée d’étude, Barika %C Batna, Algérie %G eng %0 Conference Proceedings %B Colloque international organisé à l’université Blida 2 les 19 et 20 Novembre %D 2019 %T Quand la littérature devient une rencontre entre le Moi et l’Autre en classe de langue. Le Moi et l’Autre : de la tolérance à la rencontre %A ARRAR, S %B Colloque international organisé à l’université Blida 2 les 19 et 20 Novembre %C Blida, Algérie %G eng %0 Conference Proceedings %B Colloque international « histoire et mémoires partagées » organisé par l’université Jean Monnet de Saint-Etienne Juin %D 2019 %T Réminiscence et exhumation mémorielle : la mémoire conjuguée dans terre des femmes de Nasira Belloula %A LEBBAL, S %B Colloque international « histoire et mémoires partagées » organisé par l’université Jean Monnet de Saint-Etienne Juin %C Saint-Etienne, France %G eng %0 Conference Proceedings %B Colloque national organisé à l’université Alger II ,Mai %D 2019 %T Rôle du psychologue scolaire dans la lutte contre l’indiscipline en contexte éducatif algérien. Rôle du psychologue scolaire dans l’orientation et l’encadrement pédagogique. %A ARRAR, S %B Colloque national organisé à l’université Alger II ,Mai %C Alger, Algérie %G eng %0 Conference Proceedings %B First International Congress on Advanced Geotechnical Engineering and Construction Management (ICAGECM’19), 9-10 December %D 2019 %T Analyse mécano-fiabiliste des structures en béton armé en tenant compte de l'interaction sol-structure %A Bezih, Kamel %A Demagh, Rafik %A Amrane, Moussa %B First International Congress on Advanced Geotechnical Engineering and Construction Management (ICAGECM’19), 9-10 December %C Skikda, Algeria %G eng %0 Conference Proceedings %B First International Congress on Advanced Geotechnical Engineering and Construction Management (ICAGECM’19), 9-10 December %D 2019 %T Analyse Numérique 3D de l’Interaction de Tunnels Jumeaux Investigation des Cuvettes Transversales %A Zerdia, M %A Demagh, Rafik %B First International Congress on Advanced Geotechnical Engineering and Construction Management (ICAGECM’19), 9-10 December %C Skikda, Algeria %G eng %U http://ftech.univ-skikda.dz/icagecm19/ %0 Conference Proceedings %B Proceedings of Underground Construction, June 3-5, %D 2019 %T Analysis of Ground Surface Settlement Induced By Shield Tunneling in Soft Soils %A Beghoul, M %A Demagh, Rafik %B Proceedings of Underground Construction, June 3-5, %C Prague-Tchéquie %G eng %U https://www.ucprague.com/ %0 Conference Proceedings %B Proceedings of the Arabian Journal of Geosciences (CAJG), November 25-28, %D 2019 %T The Effect of Rainfall Infiltration on Structures Buried in an Expansive Soil: The Case of Aine-Tine Water Supply Pipeline (Algeria) %A Bouatia, M %A Demagh, R %A Derriche, Z %B Proceedings of the Arabian Journal of Geosciences (CAJG), November 25-28, %C Sousse,Tunisia %G eng %U Springer-Nature. https://www.cajg.org/. (Accepted paper for poster session) %0 Conference Proceedings %B First International Congress on Advanced Geotechnical Engineering and Construction Management (ICAGECM’19), 9-10 December %D 2019 %T Effect of the initial soil suction on Structures Buried in an Expansive Soil during a Rainfall Infiltration Case of Aine-Tine pipeline %A Bouatia, Mohammed %A Demagh, Rafik %B First International Congress on Advanced Geotechnical Engineering and Construction Management (ICAGECM’19), 9-10 December %C Skikda, Algeria %G eng %0 Conference Proceedings %B First International Congress on Advances in Geotechnical Engineering and Construction Management (ICAGECM’19), 9-10 December %D 2019 %T Évaluation de modéles de sol constitutifs pour la prévision des mouvements causés par une excavation profonde dans les sables %A Amrane, Moussa %A Messast, Salah %A Bezih, Kamel %B First International Congress on Advances in Geotechnical Engineering and Construction Management (ICAGECM’19), 9-10 December %C Skikda, Algeria %G eng %0 Journal Article %J Geomechanics and Engineering %D 2019 %T Hydromechanical behavior of a natural swelling soil of Boumagueur region (east of Algeria) %A Mehdi Mebarki %A Kareche, Toufik %A Derfouf, Feth-Ellah Mounir %A Taibi, Said %A Abou-Bekr, Nabil %X This work presents an experimental study of the hydromechanical behavior of a natural swelling soil taken from Boumagueur region east of Algeria. Several pathological cases due to the soil shrinkage / swelling phenomenon were detected in this area. In a first part, the hydric behavior on drying-wetting paths was made, using the osmotic technics and saturated salts solutions to control suction. In The second part, using a new osmotic oedometer, the coupled behavior as a function of applied stresses and suction was investigated. It was shown that soil compressibility parameters was influenced by suction variations that an increase in suction is followed by a decrease in the virgin compression slope. On the other hand, the unloading slope of the oedometric curves was not obviously affected by the imposed suction. The decrease in suction strongly influences the apparent preconsolidation pressure, ie during swelling of the samples after wetting. %B Geomechanics and Engineering %V 17 %P 69-79 %G eng %U http://koreascience.or.kr/article/JAKO201911338888572.page %N 1 %0 Conference Proceedings %B The XVII European Conference on Soil Mechanics and Geotechnical Engineering, 1-6 September, %D 2019 %T Prediction of surface trough due to shield tunnelling %A Beghloul, Mohammed %A Demagh, Rafik %X In this study, the surface settlement induced by shield TBM excavation is simulated by using finite differences code Flac-3D. The proposed three dimensional simulation procedure is taking into account the main features of slurry shield TBM. The line D subway project in Lyon is chosen to validate the numerical simulations. The comparison of the numerical simulation results with the in-situ measurements shows that the proposed 3D simulation is relevant, in particular in the adopted representation for the different operations achieved by the tunnel boring machine. %B The XVII European Conference on Soil Mechanics and Geotechnical Engineering, 1-6 September, %C Reykjavik, Iceland %G eng %U https://www.ecsmge-2019.com/uploads/2/1/7/9/21790806/proceedings-v1a.pdf. %0 Journal Article %J Studia Geotechnica et Mechanica %D 2019 %T Slurry Shield Tunneling in Soft Ground-Comparison between Field Data and 3D Numerical Simulation %A Beghoul, Mohammed %A Demagh, Rafik %X In urban areas, the control of ground surface settlement is an important issue during shield tunnel-boring machine (TBM) tunneling. These ground movements are affected by many machine control parameters. In this article, a finite difference (FD) model is developed using Itasca FLAC-3D to numerically simulate the whole process of shield TBM tunneling. The model simulates important components of the mechanized excavation process including slurry pressure on the excavation face, shield conicity, installation of segmental lining, grout injection in the annular void, and grout consolidation. The analysis results from the proposed method are compared and discussed in terms of ground movements (both vertical and horizontal) with field measurements data. The results reveal that the proposed 3D simulation is sufficient and can reasonably reproduce all the operations achieved by the TBM. In fact, the results show that the TBM parameters can be controlled to have acceptable levels of surface settlement. In particular, it seems that moderate face pressure can reduce ground movement significantly and, most importantly, can prevent the occurrence of face-expected instability when the shield crosses very weak soil layers. The shield conicity has also an important effect on ground surface settlement, which can be partly compensated by the grout pressure during tail grouting. Finally, the injection pressure at the rear of the shield significantly reduces the vertical displacements at the crown of the tunnel and, therefore, reduces the settlement at the ground surface. %B Studia Geotechnica et Mechanica %V 41 %P 115 - 128 %G eng %U https://sciendo.com/it/article/10.2478/sgem-2019-0003 %N 3 %0 Conference Proceedings %B The WTC 2019 ITA-AITES World Tunnel Congress (WTC 2019), May 3-9, %D 2019 %T Surface settlement induced by shield tunneling–complete 3D numerical simulation on two case studies %A Beghoul, M %A Demagh, Rafik %B The WTC 2019 ITA-AITES World Tunnel Congress (WTC 2019), May 3-9, %C Naples, Italy %G eng %U https://www.crcpress.com/Tunnels-and-Underground-Cities-Engineering-and-Innovation-Meet-Archaeology/Peila-Viggiani-Celestino/p/book/9781138388659 %0 Journal Article %J Advances in Modelling and Analysis C %D 2019 %T Comparative Study Between Two Control Techniques Applied on the Permanent Magnet Synchronous Machine (PMSM) %A Rouabhi, Riyadh %A Abdessemed, Rachid %A Abdelghafour, Herizi %A Moustafad, Boudia %X In this article, we present a comparative study between two control techniques applied on the Permanent Magnet Synchronous Machine (PMSM), namely vector control and fuzzy logic. This comparison is based on three criteria: qualitative, quantitative and robust during the transient and permanent operation of the system. The latter comprises a machine is driven through the stator variables by two bidirectional converters. In the first part, we have presented the individual modeling of the global chain (PMSM, Inverter, and Rectifier). Then we presented and developed the two commands techniques to control the speed and the torque produced by this machine. The results of this study made it possible to evaluate the performance of these controls. %B Advances in Modelling and Analysis C %V 74 %P 51-58 %8 12 %G eng %U https://www.iieta.org/journals/ama_c/paper/10.18280/ama_c.742-407 %R 10.18280/ama_c.742-407 %0 Thesis %D 2019 %T Contribution à l'amélioration des performances des systèmes éoliens %A Khettache, Laid %G eng %9 mastersthèse de Doctorat %0 Thesis %D 2019 %T Contribution Au Contrôle De La Machine Synchrone Double Etoile %A Laggoun, Louanasse %G eng %9 mastersDoctorat %0 Thesis %D 2019 %T Contribution l’amélioration des performances des aérogénérateurs asynchrones %A BENDJEDDOU, YACINE %G eng %9 mastersThèse de Doctorat %0 Journal Article %J U.P.B. Sci. Bull., Series C %D 2019 %T Direct torque control (DTC-SVM) of PMSG based in wind energy conversion system %A Bensaadi, Hacene %A Harbouche, Youcef %A Abdessemed, Rachid %X This paper presents a comparative study between two strategies for the direct torque control (DTC) of the permanent magnet synchronous generator (PMSG) based on wind energy conversion system (WECS). The first method is a conventional direct torque control DTC and it is based on hysteresis controllers where the torque and the flux are regulated by these controllers. The second one is direct torque control by space vector modulation strategy (DTC-SVM) where the torque and flux are regulated by PI controllers. The simulation results are implemented by using MATLAB/SIMULINK. The main feature of the proposed (DTC-SVM) strategy is the reduction of torque and flux ripples. The proposed approach can be considered as an alternative solution to the control of PMSG. %B U.P.B. Sci. Bull., Series C %V 81 %G eng %N 2 %0 Journal Article %J U.P.B. Sci. Bull., Series C %D 2019 %T DIRECT TORQUE CONTROL ( DTC-SVM ) OF PMSG BASED IN WIND ENERGY CONVERSION SYSTEM %A Bensaadi, Hacene %A Harbouche, Youcef %A Abdessemed, Rachid %X This paper presents a comparative study between two strategies for the direct torque control (DTC) of the permanent magnet synchronous generator (PMSG) based on wind energy conversion system (WECS). The first method is a conventional direct torque control DTC and it is based on hysteresis controllers where the torque and the flux are regulated by these controllers. The second one is direct torque control by space vector modulation strategy (DTC-SVM) where the torque and flux are regulated by PI controllers. The simulation results are implemented by using MATLAB/SIMULINK. The main feature of the proposed (DTC-SVM) strategy is the reduction of torque and flux ripples. The proposed approach can be considered as an alternative solution to the control of PMSG. %B U.P.B. Sci. Bull., Series C %V 81 %G eng %U https://www.semanticscholar.org/paper/DIRECT-TORQUE-CONTROL-(-DTC-SVM-)-OF-PMSG-BASED-IN-Bensaadi-Harbouche/7202fbc7eea96440423a95288096a8ec6bdd36e7 %N 2 %0 Journal Article %J Journal of Thermal Analysis and Calorimetry. An International Forum for Thermal Studies, J Therm Anal Calorim (2019) %D 2019 %T Experimental investigation and thermal modelling of box and parabolic type solar cookers for temperature mapping %A Fatiha Yettou %A Amor Gama %A Boubekeur Azoui %A Ali Malek %A Narayan Lal Panwar %X This investigation examines mathematical modelling and experimental validation of two types of solar cookers: a box type with tilted intercept area equipped with one external reflector, and a parabolic cooker with a new configuration. Experiments were carried out with the cookers filled with two kilograms of water from 08:00 to 15:00 solar time. During the experiments, temperature gain in the box-type solar cooker was recorded at about 69.8 °C and in the parabolic-type solar cooker at 73.6 °C at the stagnation point. Direct normal irradiation in three distinct study areas was observed and found that it varied from 7.6 to 10 kWh m⁻². Cooking pot placed in parabolic cooker was varied between 130 and 132 °C. Centre and south-east regions of study areas where global irradiation varied from 8 to 8.4 kWh m⁻² were found suitable for box-type solar cooker and cooking pot temperature were found in the range of 100 °C to 105 °C. Mathematical modelling was programmed in MATLAB. The theoretical results were consistent with experiential data for both types of solar cookers. The effectiveness of the two cooker types can be deduced from the maps. It is found the use of the cookers in Northern and Southern regions of the country was not identical. Their suitability for cooking depends on the amount of solar radiations received. %B Journal of Thermal Analysis and Calorimetry. An International Forum for Thermal Studies, J Therm Anal Calorim (2019) %V 136 %P 1347-1364 %G eng %N 3 %0 Journal Article %J Rev. Roum. Sci. Techn.– Électrotechn. et Énerg %D 2019 %T OPTIMAL DESIGN OF INDUCTION MAGNETOHYDRODYNAMIC PUMP BY SIMULATED ANNEALING METHOD %A Bouali, Khadidja %A KADID, Fatima Zohra %A BERGOUG, Nassima %A Abdessemed, Rachid %X The magnetohydrodynamics (MHD) is an important interdisciplinary field. It is the interaction between an electromagnetic field and an electrically conducting fluid. Electromagnetic pumps are widely used for the transportation of the fluids in a variety of technological processes. The advantage of these devices is that permits the pumping of liquids without moving parts. The design of the pump is considered as an optimization problem where the objective function is the minimum of the MHD pump mass with both geometrical and electromagnetic contraints type. The obtained optimization results using the finite volume method with Matlab software show the performances of the used stochastic simulated annealing method. %B Rev. Roum. Sci. Techn.– Électrotechn. et Énerg %V 64 %P 317–321 %G eng %U http://revue.elth.pub.ro/viewpdf.php?id=864 %N 4 %0 Journal Article %J Recent Advances in Electrical & Electronic Engineering, DOI : 10.2174/2352096511666180523095219 %D 2019 %T Reduction of the Low Voltage Substation Constraints by Inserting Photovoltaic Systems in Underserved Areas %A N Benbouza %A L Benfarhi %A Boubekeur Azoui %B Recent Advances in Electrical & Electronic Engineering, DOI : 10.2174/2352096511666180523095219 %V 12 %P 102-107 %G eng %N 2 %0 Journal Article %J European Journal of Electrical Engineering %D 2019 %T Sliding Mode Control of a Grid-Connected Brushless Doubly Fed Induction Generator %A Moussa, Oussama %A Abdessemed, Rachid %A Said Benaggoune %A Benguesmia, Hani %X This paper designs an indirect power control method for brushless doubly fed induction generator (BDFIG), in which the stator is attached to grid with back-to-back space vector modulation (SVM) converter that converts the generated wind power. Our control method is a sliding mode control based on the theory of variable structure control. Specifically, the active and reactive powers, which are exchanged between the stator of the BDFIG and the grid in a linear and decoupled manner, are subjected to decoupled, vector control. In addition, a proportional integral (PI) controller was implemented to keep the DC-voltage constant for the back-to-back SVM converter. The efficiency of our control strategy was validated through simulation. The research greatly promotes the control of renewable energy generators. %B European Journal of Electrical Engineering %V 21 %P 421-430 %8 11 %G eng %U https://www.iieta.org/journals/ejee/paper/10.18280/ejee.210504 %R 10.18280/ejee.210504 %0 Journal Article %J International Journal of System Assurance Engineering and Management %D 2019 %T Super-twisting sliding mode control for brushless doubly fed induction generator based on WECS %A Moussa, Oussama %A Abdessemed, Rachid %A Said Benaggoune %X This paper deals with the robust power control of a grid-connected brushless doubly-fed induction generator (BDFIG) driven by the variable speed wind turbine. With the using of a super twisting algorithm which is a high-order sliding mode controller (HOSMC). This approach guarantees both the dynamic performance and the same robustness as traditional first order (SMC) algorithm and reduces the chattering phenomenon, which is the biggest disadvantage in the implementation of this technique. The developed algorithm relies on the decoupling control by implementing the strategy of oriented grid flux vector control. In order to enhance the desired performances, an attempt is made by controlling the generated stator active and reactive powers in a linear and decoupled manner to ensure the global asymptotical stability, HOSMC approach is implemented. Therefore, an optimal operation of the BDFIG in sub-synchronous operation is used in addition to the stator power flows where the stator power factor is kept in a unity. The suggested method is examined with the Matlab/Simulink software. The performances and the feasibility of the designed control are illustrated by simulation results. %B International Journal of System Assurance Engineering and Management %V 10 %P 1145–1157 %8 08 %G eng %U https://link.springer.com/article/10.1007/s13198-019-00844-3 %R 10.1007/s13198-019-00844-3 %0 Journal Article %J International Journal of Quality & Reliability Management %D 2019 %T An alternative approach to safety integrity level determination: results from a case study, . %A N OUAZRAOUI %A Nait-Said, R %X Purpose The purpose of this paper is to validate a fuzzy risk graph model through a case study results carried out on a safety instrumented system (SIS). Design/methodology/approach The proposed model is based on an inference fuzzy system and deals with uncertainty data used as inputs of the conventional risk graph method. The coherence and redundancy of the developed fuzzy rules base are first verified in the case study. A new fuzzy model is suggested for a multi-criteria characterization of the avoidance possibility parameter. The fuzzy safety integrity level (SIL) is determined for two potential accident scenarios. Findings The applicability of the proposed fuzzy model on SIS shows the importance and pertinence of the proposed fuzzy model as decision-making tools in preventing industrial hazards while taking into consideration uncertain aspects of the data used on the conventional risk graph method. The obtained results show that the use of continuous fuzzy scales solves the problem of interpreting results and provides a more flexible structure to combine risk graph parameters. Therefore, a decision is taken on the basis of precise integrity level values and protective actions in the real world are suggested. Originality/value Fuzzy logic-based safety integrity assessment allows assessment of the SIL in a more realistic way by using the notion of the linguistic variable for representing information that is qualitative and imprecise and, therefore, ensures better decision making on risk prevention. %B International Journal of Quality & Reliability Management %V 2019 %P 1784-1803 %G eng %U HTTP://doi.org/10.1108/IJQRM-02-2019-0065 %N 36(10): %0 Conference Proceedings %B National Seminar on Process Safety and Sustainable Development (CNSPDD-2019) %D 2019 %T Apport du retour d’expérience dans la sécurité des procédés : management des Presque accidents et signaux faibles %A M CHATI %A Mébarek Djebabra %A S CHETTOUH %B National Seminar on Process Safety and Sustainable Development (CNSPDD-2019) %C Oran, Algeria %G eng %0 Conference Proceedings %B International Conference on Advanced Engineering in Petrochemical Industry (ICAEPI’19) %D 2019 %T CONTRIBUTION OF THE CLUSTER STRATEGY-CULTURE -PEOPLE ALIGNMENT TO THE ENVIRONMENTAL HEALTH %A Wafa Boulagouas %A Rachid Chaib %A Mébarek Djebabra %X An increasing interest and efforts are being made at all levels by academics and practitioners to protect the workers and encourage the development of strategies and approaches to reduce the number of accidents at the workplace, improve the safety performance of the industrial companies and preserve the environmental health. In spite of the continuous efforts of the Algerian companies to improve their health and safety performance, high number of accidents and ill-health problems among the Algerian companies are still being recorded. In terms of definition, the Environmental Health refers to human’s health aspects including quality of life. These aspects are defined by the physical, biological, social and psychosocial factors of the environment. It includes also the theory and practice of assessing, correcting, controlling and preventing these factors in an environment which may potentially affect human’s health.This paper comes to explore the contribution of the alignment of the cluster cultural aspects (CA), health and Safety strategy (H&SS) and people (P) as a way to improve the environmental health, particularly the Musculoskeletal disorders (MSDs) that present one of the prominent and significant health problems at work. %B International Conference on Advanced Engineering in Petrochemical Industry (ICAEPI’19) %C Skikda, Algeria %G eng %U https://www.researchgate.net/publication/337648981_CONTRIBUTION_OF_THE_CLUSTER_STRATEGY-CULTURE_-PEOPLE_ALIGNMENT_TO_THE_ENVIRONMENTAL_HEALTH %0 Conference Proceedings %B 1st Int. Conf. on Materials, Environment, Mechanical and Industrial systems –ICMEMIS’19-, 29-30 June %D 2019 %T Contribution of the systemic approach to OH&S promotion %A Fourar, Y-O %A Benhassine, W %A Saadia Saadi %A Mébarek Djebabra %B 1st Int. Conf. on Materials, Environment, Mechanical and Industrial systems –ICMEMIS’19-, 29-30 June %C Djelfa, Algeria %G eng %0 Conference Proceedings %B First International Conference on Materials, Environment, Mechanical and Industrial Systems ICMEMIS’19 %D 2019 %T Contribution of the Systemic Approach to OH&S Promotion %A Fourar, Youcef Oussama %A Wissal Benhassine %A Saadia Saadi %A Mébarek Djebabra %X Faced with different representation models of a work situation whose centers of interest vary from one model to another, guides have been developed to try and analyze occupational risks in their entirety. However, the development of these guides poses a double problem: the completeness of this analysis and the order attributed to the analyzed occupational risks. This article aims to solve this problem through a systemic approach that allows to develop a hierarchical model of occupational risks invariants. Its exploitation allows to carry out an exhaustive analysis of occupational risks and consequently the elaboration of a long-term strategy of prevention. %B First International Conference on Materials, Environment, Mechanical and Industrial Systems ICMEMIS’19 %C Djelfa - Algeria %G eng %0 Journal Article %J International Journal of Quality & Reliability Management %D 2019 %T Contribution of the three-dimensional model to the reliability allocation of multiphase systems", , 2019, :. %A S SAADI %A DJEBABRA, M %A O ROUDIES %A Boulagouas, W %X Purpose The purpose of this paper is to deal with the allocation requirements of the dependability of the multiphase systems. Design/methodology/approach It consists of a proposal for a combined methodology based on the simultaneous use of decomposition systems and reliability allocation method. Findings In the developed methodology, the authors use the principles of risk assessment and propose a new formulation of weight allowance with reference to the structural-functional dependence. Practical implications The suggested methodology provides invaluable help to implementation process analysis. Originality/value The adopted allocation approach is based on the use of a three-dimensional model: temporal, structural and functional decomposition of systems. %B International Journal of Quality & Reliability Management %V 2019 %P 1038-1052 %G eng %U HTTP://doi.org/10.1108/IJQRM-07-2017-0127 %N 36(7) %0 Journal Article %J World Journal of Science, Technology and Sustainable Development %D 2019 %T Contribution to the evaluation of safety barriers performance %A H HADEF %A DJEBABRA, M %A L SEDRAT %A M TAGHLABET %X Purpose The risk control is an unavoidable step in the risk management process. It is materialized by concrete actions of risks reduction in order to decrease their likelihood and/or their severity and also to preserve the environment. The paper aims to discuss this issue. Design/methodology/approach The main goal of the proposed methodology is to define the safety barriers (SB) that can be realized and their contribution to reduce major accidents scenarios that may occur in high-risk establishments. Findings In the proposed methodology, the authors present a combination of methods to prove the effectiveness of SB in an industrial installation. Practical implications The proposed methodology is a valuable help to industrialists to secure their industrial activities and preserve the environment at the same time. Originality/value The retained methods are often used separately for audit purposes or risk assessments of high-risk industrial facilities. In this paper, three methods have been selected and articulated in an approach for a better evaluation of risk control level. %B World Journal of Science, Technology and Sustainable Development %V 2019 %P 56-68 %G eng %U HTTP://doi.org/10.1108/WJSTSD-08-2018-0055 %N 16(1) %0 Conference Proceedings %B 12th Chaotic Modeling and Simulation International Conference %D 2019 %T Decision-Making in a Context of Uncertainty %A Abdelbaki Laidoune %X The decision process is considered as the key element for the smooth behavior of systems. For non-complex or linear systems, this process usually follows clear rules or requirements, so that the decision will be easy to make without any difficulty. In the case of complex (non-linear) systems, the decision-making process is repeatedly challenged problems because of the interactions of several factors at the same time and because of the hazards characterizing these factors. This situation will worsen further if the system goes out of its normal operating range to fall into uncertainty. In this paper, we will try to make our contribution, to arrive at simplifying the decision-making process, while playing on human factors (ability, anticipation, risk-taking, etc.). As this process can be improved by the development of intelligent decision support tools. %B 12th Chaotic Modeling and Simulation International Conference %G eng %U https://link.springer.com/chapter/10.1007/978-3-030-39515-5_13 %0 Conference Proceedings %B First International Conference on Materials, Environment, Mechanical and Industrial Systems ICMEMIS’19 %D 2019 %T Development of systematic modelling integrating fire safety barriers %A Benkaouha, Bilal %A Djamel Bellala %A Meriem Smaiah %A Mébarek Djebabra %B First International Conference on Materials, Environment, Mechanical and Industrial Systems ICMEMIS’19 %C DJELFA - ALGERIA %G eng %0 Conference Proceedings %B 1st Int. Conf. on Materials, Environment, Mechanical and Industrial systems –ICMEMIS’19-, 29-30 June %D 2019 %T Development of systemic modeling integrating fire safety barriers %A Benkaouha, B %A Belaala, D %A Samaiah, M %A Mébarek Djebabra %B 1st Int. Conf. on Materials, Environment, Mechanical and Industrial systems –ICMEMIS’19-, 29-30 June %C Djelfa, Algeria %G eng %0 Conference Proceedings %B 5th International Conference on Mechanical Engineering Research (ICMER 2019) 30 - 31 July %D 2019 %T The discrepancy in the construction industry of Malaysia: one of the most contributing industries in Malaysia's economy and the highest contributor of the fatal accidents %A Zid, Chaher %A Narimah Kasim %A Ali Raza Soomro %A Abdelbaki Laidoune %X Malaysian construction industry is considered as substantial power for the economy of the country. The value of construction work is increasing year per year. Malaysia’s economy experienced a commendable growth the recent years; basically, the construction industry is statistically significant with economic development and has strong linkages with other industry sectors. However, the Malaysian construction industry is facing many challenges especially the fatal accidents. These last came first on top of the construction sector compared all other industries. This article describes the importance of the construction sector for Malaysia’s economy and its efficient contribution across all states of Malaysia. Furthermore, detailed statistics and analysis were carried out to describe the severity of fatal accidents occurred in construction industry of Malaysia. Besides, recommendations were listed in order to better manage the construction industry without involving in fatal accidents. By taking into account the significant influence of the construction industry on Malaysian economy, full attention should be given to the construction field by the Malaysian government and improve further the construction management in general and the construction safety in particular. %B 5th International Conference on Mechanical Engineering Research (ICMER 2019) 30 - 31 July %C Kuantan, Malaysia %G eng %0 Conference Proceedings %B 2nd Int. Conf. on Advanced Engineering in Petrochemical Industry (ICAEPI-2019), November 26-28 %D 2019 %T The effects of work-related stress on job performance: a literature review %A Baziz, A %A Rachid Chaib %A Mébarek Djebabra %A Bougofa, M %B 2nd Int. Conf. on Advanced Engineering in Petrochemical Industry (ICAEPI-2019), November 26-28 %C Skikda, Algeria %G eng %0 Conference Proceedings %B 5th Int. Conference on Maintenance and Industrial Safety (CIMSI’19), 18 and 19 November %D 2019 %T Environment risk assessment using bowtie methodology: a key driven tool for alignment measurement %A Wafa Boulagouas %A Rachid Chaib %A Mébarek Djebabra %B 5th Int. Conference on Maintenance and Industrial Safety (CIMSI’19), 18 and 19 November %C Skikda, Algeria %G eng %0 Conference Proceedings %B 5th Int. Conference on Energy, Materials, Applied Energetics and Pollution (ICEMAEP’19) %D 2019 %T Investigating the impact of employees readiness on the implementation of an environmental management system %A Wafa Boulagouas %A Rachid Chaib %A Mébarek Djebabra %B 5th Int. Conference on Energy, Materials, Applied Energetics and Pollution (ICEMAEP’19) %C Constantine, Algeria %G eng %0 Conference Proceedings %B 2ème colloque international sur la prévention des risques professionnels, PREVENT PRO CONGRESS, CNAS, les 03-05 Décembre %D 2019 %T La culture de la sécurité des soins : propositions méthodiques et pratiques %A Mébarek Djebabra %B 2ème colloque international sur la prévention des risques professionnels, PREVENT PRO CONGRESS, CNAS, les 03-05 Décembre %C Alger, Algérie %G eng %0 Conference Proceedings %B XXème Journées Nationales de Médecine du Travail %D 2019 %T La santé mentale au travail, de quoi s’agit-il au juste? Plaidoirie d’une prise en charge collective %A Wissal Benhassine %B XXème Journées Nationales de Médecine du Travail %C Constantine, Algérie %G eng %0 Conference Proceedings %B 35èmes Journées Nationales de la Santé au Travail dans le BTP %D 2019 %T La tuberculose extra pulmonaire chez les silicotiques : à propos de trois cas %A Wissal Benhassine %A Bensekhria, N %A Hassinet, H-K. %A Nedjahi, M %A Chenouf, N %B 35èmes Journées Nationales de la Santé au Travail dans le BTP %C Metz, Franc %G eng %0 Conference Proceedings %B 2ème colloque international sur la prévention des risques professionnels, PREVENT PRO CONGRESS, CNAS, les 03-05 Décembre %D 2019 %T Les dimensions insoup\c connées du défi de la norme 45001 %A L BOUBAKER %B 2ème colloque international sur la prévention des risques professionnels, PREVENT PRO CONGRESS, CNAS, les 03-05 Décembre %C Alger, Algérie %G eng %0 Conference Proceedings %B Conférence Internationale sur le Monitoring des Systèmes Industriels (CIMSI), les 11-12 Décembre %D 2019 %T Les risques non techniques liés aux parties prenantes: un autre défi pour l’organisation- Comparaison entre deux entreprises algériennes %A Khemri, L %A L BOUBAKER %A Mébarek Djebabra %A Meriem Smaiah %B Conférence Internationale sur le Monitoring des Systèmes Industriels (CIMSI), les 11-12 Décembre %C Marrakech, Maroc %G eng %0 Journal Article %J J Fail. Anal. and Preven %D 2019 %T PCA-I and AHP Methods: Unavoidable Arguments in Accident Scenario Classification %A H HADEF %A DJEBABRA, M %X Risk mapping is the foundation of the risk prevention strategy. It allows for the understanding of all factors that may affect the activities. It is a collective decision based on negotiation between the actors. Argument-based negotiation accelerates the negotiation process and converges it toward a final and common decision. It is in this context that this paper aims to illustrate the contribution of the improved PCA and AHP tools, considered as arguments, to the classification of major accident risks. %B J Fail. Anal. and Preven %V 2019 %P 496–503 %G eng %U HTTP://doi.org/10.1007/s11668-019-00625-x %N 19 %0 Conference Proceedings %B Première Journée d’Etude Scientifique sur l’Environnement et le Développement Durable (JESEDD-01/19), le 12 Juin %D 2019 %T Place qu’occupent les Parties Prenantes dans les décisions de l’entreprise %A Khemri, L %A L BOUBAKER %A M SMAIAH %A DJEBABRA, M %B Première Journée d’Etude Scientifique sur l’Environnement et le Développement Durable (JESEDD-01/19), le 12 Juin %C Batna, Algérie %G eng %0 Conference Proceedings %B 35èmes JOURNÉES NATIONALES DE SANTÉ AU TRAVAIL DANS LE BTP %D 2019 %T Profil épidémiologique et aspects cliniques de la silicose des tailleurs de pierre de Tkout %A Wissal Benhassine %B 35èmes JOURNÉES NATIONALES DE SANTÉ AU TRAVAIL DANS LE BTP %C Metz, France %G eng %0 Journal Article %J Management of Environmental Quality %D 2019 %T Proposal for a new method for analyzing the domino effect in an oil refinery and its impact on the environment %A M SMAIAH %A M DJBABRA %A L BOUBAKER %X Purpose The purpose of this paper is to propose a new managerial method to integrate the environmental dimension in the domino effects (DEs) analysis. Design/methodology/approach The proposed method is a three-step approach: identification of primary hazards in the form of potential events causing the DE, a mixed quantification (deterministic and probabilistic) of the risk of the DEs with a view to its control and capitalizing the results from the BLEVESOFT software as well as those relating to the probability of occurrence of the DEs in the form of a prioritized action plan dedicated to surrounding environments (proximity territory). Findings The primary hazards are technologically manageable at the studied system but are unpredictable if triggered at the environmental subsystem because they are difficult to be managed and often cause panic, which is a form of a very catastrophic DE. Research limitations/implications The research could affect members of the engineering and construction industry, and can be applied in several domains since it studies the DE phenomenon. which is a common problem especially in industrials plants. Practical implications The proposal method is applied in an industrial terminal in Algeria. Originality/value This paper presents an exploratory study of using a new managerial method that aims to combine the potentialities of geomatic sciences that allow the spatial representation of nearby territories to assess the severity of DEs through a deterministic approach, and the modeling of DEs as well as their analysis by a probabilistic approach. %B Management of Environmental Quality %V 2019 %P 910-924 %G eng %U HTTP://doi.org/10.1108/MEQ-09-2018-0167 %N 30(5) %0 Journal Article %J Prod. Eng. Res. Devel %D 2019 %T Proposal method for the classification of industrial accident scenarios based on the improved principal components analysis (improved PCA) %A H HADEF %A M DJBABRA %X Using a risk matrix for Risk mapping constitutes the basis of risk management strategy. It aims to classify the identified risks with regards to their management and control. This risk classification, which is based on the frequency and the severity dimensions, is often carried out according to a procedure founded on experts’ judgments. In order to overcome the subjectivity bias of this classification, this paper presents the contribution of the Principal Components Analysis (PCA) method: an exploratory method for graphing risks based on factors that allow a better visualized classification of scenarios accidents. Still, the commonly encountered problem in the data classified by the PCA method resides in the main factors of classification; we judged useful to frame these letters by an algebraic formulation to make an improvement of this classification possible. The obtained results show that the suggested method is a promising alternative to solve the recurring problems of risk matrices, notably in accident scenarios’ classification. %B Prod. Eng. Res. Devel %V 2019 %P 53–60 %G eng %U HTTP://doi.org/10.1007/s11740-018-0859-3 %N 13 %0 Conference Proceedings %B 2nd International Conference on Artificial Intelligence and Information Technologies. March 4th to 6th %D 2019 %T Spurious trip rate modelization and quantitative assessment of emergency shutdown system in the oil and gas industry %A Touaher, H %A Ouazraoui, Nouara %A Korichi, M %A Nait-Said, R %A Bachi, B %B 2nd International Conference on Artificial Intelligence and Information Technologies. March 4th to 6th %C Ouargla, Algeria %G eng %0 Journal Article %J International Journal of Health Care Quality Assurance %D 2019 %T Study of safety culture in healthcare institutions: case of an Algerian hospital %A A BOUGHABA %A S ABERKANE %A Y FOURAR %A M DJBABRA %X Purpose For many years, the concept of safety culture has attracted researchers from all over the world, and more particularly in the area of healthcare services. The purpose of this paper is to measure safety culture dimensions in order to improve and promote healthcare in Algeria. Design/methodology/approach The used approach consists of getting a better understanding of healthcare safety culture (HSC) by measuring the perception of healthcare professionals in order to guide promotion actions. For this, the Hospital Survey on Patient Safety Culture questionnaire was used in a pilot hospital setting where it was distributed on a number of 114 health professionals chosen by stratified random sampling. Findings The results showed that the identified priority areas for HSC improvement help in establishing a trust culture and a non-punitive environment based on the system and not on the individual. Originality/value Safety is recognized as a key aspect of service quality, thus measuring the HSC can help establish an improvement plan. In Algerian health facilities, this study is considered the first to examine perceptions in this particular area. The current results provide a baseline of strengths and opportunities for healthcare safety improvement, allowing the managers of this type of facilities to take steps that are more effective. %B International Journal of Health Care Quality Assurance %V 2019 %P 1081-1097 %G eng %U HTTP://doi.org/10.1108/IJHCQA-09-2018-0229 %N 32(7) %0 Conference Proceedings %B The First International Conference on Materials, Environment, Mechanical and Industrial Systems (ICMEMIS’19), 29-30 Juin 2019, University of Djelfa %D 2019 %T Characterization of Laminate Carbon Fibers Materials Using a New Multi-Coils Circular Eddy Current Sensor %A Benhadda Nabil %B The First International Conference on Materials, Environment, Mechanical and Industrial Systems (ICMEMIS’19), 29-30 Juin 2019, University of Djelfa %G eng %U http://www.univ-djelfa.dz/icmemis19/ %0 Thesis %D 2019 %T Commande asynchrone d'une machine asynchrone double étoile %A BOUSLIMANI Souhila %G eng %9 masters %0 Thesis %D 2019 %T Commande de la machine asynchrone par Mode de glissement %A MADACI Riad %G eng %9 masters %0 Thesis %D 2019 %T Commande Directe du Couple de la Machine Asynchrone Double Etoile(MASDE) %A Bettyeb Souhyla %A Belaidi Kaoutar %G eng %9 masters %0 Thesis %D 2019 %T Commande hybride floue-glissant de la machine à induction %A ZITOUNI Amel %G eng %9 masters %0 Thesis %D 2019 %T Commande par DTC de la GADA %A DJOUALA Imane %G eng %9 masters %0 Thesis %D 2019 %T Commande par mode glissant de la machine synchrone à aimants permanents %A ZEMACHE Abderahmane %G eng %9 masters %0 Thesis %D 2019 %T Commande vectorielle de la machine asynchrone par un régulateur PI %A ZAHAL Farid %G eng %9 masters %0 Thesis %D 2019 %T Commande vectorielle de la machine synchrone à aimants permanents %A KHERCHOUCHE Khaled %G eng %9 masters %0 Journal Article %J Advanced Electromagnetics Journal (AEMJ) %D 2019 %T Composite Material Characterization using Eddy Current by 3D FEM Associated with Iterative Technique, ISSN 2119-0275 %A Hachi Dahmane %A Benhadda Nabil %A Helifa Bachir %A Lefkaier Ibn Khaldoun %A Abdelhadi, Bachir %X In this paper, an iterative technique, employing the T formulation associated with the finite element method, based on Maxwell’s equations and the Biot-savart law, is used for analyzing the density of eddy currents in composite carbon fiber reinforced polymer (CFRP) materials. For this purpose, a code has been developed for solving an electromagnetic 3D non-destructive evaluation problem. This latter permits the characterization of this CFRP and determinate of fibers orientation using the impedance variation which is implanted in polar diagram. Firstly, the obtained results are compared with those of the analytical model. This comparison reveals a high concordance which proves the validity of the proposed method. Secondly, three different applications are shown for illustrating the characterization of unidirectional, bidirectional and multidirectional piece using a rectangular coil plotted in normalized impedance diagram. %B Advanced Electromagnetics Journal (AEMJ) %V volume 8 %G eng %U https://aemjournal.org/index.php/AEM/article/view/953 %N N°1 %0 Thesis %D 2019 %T Conception, étude et réalisation d'un système de positionnement %A KHERCHOUCHE Abdelmalik %A MEDOUR Abdelhalim %G eng %9 masters %0 Thesis %D 2019 %T Contribution à la commande d'un MADA . Apport des techniques de l'intelligence artificielle %A ZIDANI Med yazid %G eng %9 masters %0 Thesis %D 2019 %T Contribution au contrôle de la machine synchrone double étoile %A Laggoune Louanasse %G eng %9 masters %0 Thesis %D 2019 %T Contrôle adaptatif de la machine synchrone à aimants permanents %A DRID Hamza %G eng %9 masters %0 Thesis %D 2019 %T Contrôle Non Destructif par Flux de Fuite Magnétique Appliqué aux Pièces Ferromagnétiques %A KHEBAL Merwane %A DALI Abderrahmane %G eng %9 masters %0 Thesis %D 2019 %T Contrôle par découplage de la MSAP %A DERRADJI Med Lamine %G eng %9 masters %0 Journal Article %J UPB Scientific Bulletin, Series A: Applied Mathematics and Physics %D 2019 %T Design of Robust Control using Fuzzy Logic Controller for Doubly Frd Induction Motor Drives, ISSN / e-ISSN 1454 / 234X %A Zidani Mohamed Yazid %A Youb Lamia %A Sebti Belkacem %A Farid, Naceri %X This paper presents a fuzzy logic controller destined to the doubly-fed induction motor (DFIM) speed controlling. It solves the problems associated with the conventional IP (Integral Proportional) controller. This fuzzy logic controller is based on the decoupling control to enhance robustness under different operating conditions such as load torque and in the presence of parameters variation. The simulation results for various scenarios show the high performances of the proposed control in terms of piloting effectiveness, precision, rapidity and stability for the high powers DFIM operating at variable speeds. %B UPB Scientific Bulletin, Series A: Applied Mathematics and Physics %V volume 81 %G eng %U https://www.researchgate.net/publication/332232682_DESIGN_OF_ROBUST_CONTROL_USING_FUZZY_LOGIC_CONTROLLER_FOR_DOUBLY-FED_INDUCTION_MOTOR_DRIVES %N issue 1 %0 Journal Article %J Research in Nondestructive Evaluation %D 2019 %T Development of Multi-Coils Circular Eddy Current Sensor for Characterization of Fibers Orientation and Defect Detection in Multidirectional CFRP Material, ISSN / e-ISSN 0934-9847 / 1432-2110 %A Benhadda Nabil %A Hachi Dahmane %A Helifa Bachir %A Lefkaier Ibn Khaldoun %A Abdelhadi, Bachir %X This article presents a study of a Multi-coils circular eddy current non-destructive testing sensor for determining the fibers orientation as well as the detection of defect in multidirectional carbon fibers reinforced polymer (CFRP). The developed sensor contains 16 rectangular coils connected in series and supplied by a single-phase sinusoidal source. This sensor allows the annulations of the mechanical rotation of the conventional sensors and it permits to reduce the inspection procedure duration. The electromagnetic phenomena are calculated by using 3D finite element method (FEM) based on the electromagnetic AV-A formulation. Finally, the Multi-coils circular sensor responses are analyzed through polar diagrams of the impedance variation, where the defect is taken into consideration. A great concordance between the obtained results and those of literatures has been noticed. The provided results show that the proposed sensor allows an efficient characterization of multidirectional CFRP and detection of defects in different layers. %B Research in Nondestructive Evaluation %G eng %U https://www.tandfonline.com/doi/abs/10.1080/09349847.2019.1645254?journalCode=urnd20 %0 Thesis %D 2019 %T Etude d'un Volant d'Inertie %A RAZI Ilhem %G eng %9 masters %0 Thesis %D 2019 %T Etude d'une Batterie Solaire %A RAHAMINE Fayrouze %G eng %9 masters %0 Thesis %D 2019 %T Etude et modélisation numérique d'une machine à courant continu sans balais %A MOHAMED CHERIF Siham %G eng %9 masters %0 Thesis %D 2019 %T Étude et Réalisation d'un Banc D'essai Dédie aux Applications du Contrôle Non Destructif par Courants de Foucault %A AOUFI Mahfoud %A KHODJA Lakhdar %G eng %9 masters %0 Thesis %D 2019 %T Faults Diagnosis of Turbo-Generator using Artificial Intelligence %A SADI.M.A %G eng %9 masters %0 Journal Article %J Nondestructive Testing and Evaluation %D 2019 %T Fictitious electric conductivity modelling of eddycurrent evaluation of magnetic materials, ISSN / e-ISSN 1058-9759 / 1477-2671 %A Bouchala, Tarik %A Aouf Anouaressadate %A Abdelhadi, Bachir %A Benoudjit Azeddine %X This paper presents a new modeling approach of eddy current nondestructive evaluation systems containing magnetic materials. Originally, the proposed model is based on coupled circuits principle and the notion of equivalent current density. In order to make the model homogenous, we consider the current density as a state variable since this density is compatible with the representation of the magnetisation by equivalent currents. By introducing the fictitious electric conductivity approach, the sensor impedance is expressed according to magnetic tube or plate characteristics such as electric conductivity and magnetic permeability. An excellent concordance is achieved by comparing the calculated results to those of analytical ones. Regarding the mesh simplicity and the fast calculation, this method is very adapted for the resolution of the inverse problems for real time evaluation of the properties of magnetic materials. %B Nondestructive Testing and Evaluation %P pp. 19-28 %G eng %U https://www.tandfonline.com/doi/abs/10.1080/10589759.2019.1628958?journalCode=gnte20 %0 Journal Article %J Journal of Central South University %D 2019 %T Genetic Algorithm and Particle Swarm Optimization tuned fuzzy PID Controller on direct torque control of dual star induction motor, ISSN / e-ISSN 2095-2899 / 1993-0666 %A Ghoulemallah Boukhalfa %A Sebti, Belkacem %A Chikhi Abdesselem %A Said, BENAGGOUNE %X This study presents analysis, control and comparison of three hybrid approaches for the direct torque control (DTC) of the dual star induction motor (DSIM) drive. Its objective consists of combining three different heuristic optimization techniques including PID-PSO, Fuzzy-PSO and GA-PSO to improve the DSIM speed controlled loop behavior. The GA and PSO algorithms are developed and implemented into MATLAB. As a result, fuzzy-PSO is the most appropriate scheme. The main performance of fuzzy-PSO is reducing high torque ripples, improving rise time and avoiding disturbances that affect the drive performance. %B Journal of Central South University %V volume 26 %P pp. 1886–1896 %G eng %U https://link.springer.com/article/10.1007/s11771-019-4142-3 %N N°7 %0 Journal Article %J Journal of Fundamental and Applied Sciences %D 2019 %T Hybrid fuzzy second order sliding mode control speed for Direct torque Control of Dual Star Induction motor, ISSN 1112-9867 %A B. Kiyyour %A D. NAIMI %A A. SALHI %A Laggoune Louanasse %B Journal of Fundamental and Applied Sciences %G eng %0 Thesis %D 2019 %T Implémentation de l’Identification et de la Commande Numériques d’un Moteur à Courant Continu à base d’Arduino-Matlab/Simulink %A BERTAL Imane %G eng %9 masters %0 Thesis %D 2019 %T Influence des variateurs de vitesse sur la qualité de l'énergie électrique %A AOURRA Med Lamine %G eng %9 masters %0 Thesis %D 2019 %T La maintenance des systèmes hydrauliques et pneumatiques %A KERKEB Adel %A DIBAOUI Mohamed %G eng %9 masters %0 Thesis %D 2019 %T La maintenance d’une turbine à gaz par la méthode de Weinbull %A MAMOUNI mohamed %A GHIOUB Aziz %G eng %9 masters %0 Conference Proceedings %B 8th International Conference on Renewable Energy Research and Applications (ICRERA) %D 2019 %T New nanotechnology structures CNTFET GaAs %A Benbouza Med Salah %B 8th International Conference on Renewable Energy Research and Applications (ICRERA) %G eng %U https://www.icrera.org/ %0 Journal Article %J International Journal of Modelling Identification and Control %D 2019 %T A New robust adaptive fuzzy synergetic control for nonlinear systems with an application to an inverted pendulum, ISSN / e-ISSN 1746-6172 / 1746-6180 %A Abderazak, Saidi %A Farid, Naceri %X This paper deals with a nonlinear adaptive control design based on synergetic control, which also uses fuzzy systems to approximate the dynamics of nonlinear systems. The stability of the closed-loop system is ensured by the Lyapunov synthesis in the sense that all the signals are bounded, and the controller parameters adjusted by adaptation laws. The proposed algorithm is applied to an inverted pendulum to track a sinusoidal reference trajectory. Simulations and discussion are presented to illustrate the new robust adaptive fuzzy synergetic control described in this work. %B International Journal of Modelling Identification and Control %V volume 33 %G eng %U https://www.inderscience.com/offer.php?id=104378 %N N°2 %0 Thesis %D 2019 %T Outils de diagnostic des transformateurs de puissance %A SAHTAL Rabeh %A TOUCHEN. H %G eng %9 masters %0 Thesis %D 2019 %T Réalisation d'une Maquette Pédagogique d'un Système Hybride Eolien Photovoltaique %A KHETTACHE Ramzeddine %A MECHENANE Farouk %G eng %9 masters %0 Thesis %D 2019 %T Role de la compensation de l'énergie réactive dans la stabilité des réseaux électriques %A CHERRAF Fatih %G eng %9 masters %0 Journal Article %J International Journal Intelligent Engineering Informatics %D 2019 %T Speed Control of a doubly fed induction Machine Based on Fuzzy Adaptive, ISSN / e-ISSN 1758-3657 / 1758-8723 %A Abderazak, Saidi %A Farid, Naceri %X In this paper, we are interested in the adaptive fuzzy control a technique has been studied and applied, namely adaptive fuzzy control based on theory of Lyapunov. The system based on the stability theory is used to approximate the gains ke and kdce to ensure the stability of the control in particular time, simulations results obtained by using MATLAB environment gives that the fuzzy adaptive control more robust, also it has superior dynamics performances. The results and test of robustness will be presented. %B International Journal Intelligent Engineering Informatics %V volume 7 %P pp.61 - 76 %G eng %U https://www.inderscience.com/info/inarticle.php?artid=97551 %N N°1  %0 Journal Article %J International Journal of System Assurance Engineering and Management %D 2019 %T Super twisting sliding mode control for brushless doubly fed induction generator based on WECS, ISSN 0975-6809 %A Moussa Oussama %A Rachid, Abdessemed %A Said, BENAGGOUNE %X This paper deals with the robust power control of a grid-connected brushless doubly-fed induction generator (BDFIG) driven by the variable speed wind turbine. With the using of a super twisting algorithm which is a high-order sliding mode controller (HOSMC). This approach guarantees both the dynamic performance and the same robustness as traditional first order (SMC) algorithm and reduces the chattering phenomenon, which is the biggest disadvantage in the implementation of this technique. The developed algorithm relies on the decoupling control by implementing the strategy of oriented grid flux vector control. In order to enhance the desired performances, an attempt is made by controlling the generated stator active and reactive powers in a linear and decoupled manner to ensure the global asymptotical stability, HOSMC approach is implemented. Therefore, an optimal operation of the BDFIG in sub-synchronous operation is used in addition to the stator power flows where the stator power factor is kept in a unity. The suggested method is examined with the Matlab/Simulink software. The performances and the feasibility of the designed control are illustrated by simulation results. %B International Journal of System Assurance Engineering and Management %V volume 10 %P pp. 1145–1157 %G eng %U https://link.springer.com/article/10.1007/s13198-019-00844-3 %0 Book Section %B Additive Manufacturing Technologies From an Optimization Perspective %D 2019 %T 3D Printing Analysis by Powder Bed Printer (PBP) of a Thoracic Aorta Under Simufact Additive %A Ameddah, Hacene %A Mazouz, Hammoudi %X In recent decades, vascular surgery has seen the arrival of endovascular techniques for the treatment of vascular diseases such as aortic diseases (aneurysms, dissections, and atherosclerosis). The 3D printing process by addition of material gives an effector of choice to the digital chain, opening the way to the manufacture of shapes and complex geometries, impossible to achieve before with conventional methods. This chapter focuses on the bio-design study of the thoracic aorta in adults. A bio-design protocol was established based on medical imaging, extraction of the shape, and finally, the 3D modeling of the aorta; secondly, a bio-printing method based on 3D printing that could serve as regenerative medicine has been proposed. A simulation of the bio-printing process was carried out under the software Simufact Additive whose purpose is to predict the distortion and residual stress of the printed model. The binder injection printing technique in a Powder Bed Printer (PBP) bed is used. The results obtained are very acceptable compared with the results of the error elements found. %B Additive Manufacturing Technologies From an Optimization Perspective %G eng %0 Conference Proceedings %B The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019) , April 10-11 %D 2019 %T Analysis of the shock absorber thickness on the rehabilitation of the fracture of liner on alumina in acetabular cup (Titanium - Alumina) in the total hip prosthesis %A Bouakar, Loubna %A Ameddah, Hacene %A Mazouz, Hammoudi %B The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019) , April 10-11 %C Oran, Algeria %G eng %0 Journal Article %J Journal of Solid Mechanics %D 2019 %T Chip Formation Process using Finite Element Simulation “Influence of Cutting Speed Variation” %A Kherraf, A %A Tamerabet, Y %A Brioua, M %A Benbouta, R %B Journal of Solid Mechanics %I Islamic Azad University Arak Branch %V 11 %P 854-861 %@ 2008-3505 %G eng %U http://jsm.iau-arak.ac.ir/article_668618_1132799.html %N 4 %0 Journal Article %J Journal of Nano-and Electronic Physics %D 2019 %T Effect of Broken Fiber on Stress Transfer of Short Fiber Reinforced Thermoplastic Matrix Composite %A Mansouri, K %A Brioua, M %A Djebaili, H %A Ghelani, L %A Chitour, M %B Journal of Nano-and Electronic Physics %I Sumy State University, Journal of Nano-and Electronic Physics %V 11 %@ 2077-6772 %G eng %U https://search.proquest.com/openview/0576ddeba777bb7ac2c7b464069058b0/1?pq-origsite=gscholar&cbl=2032533 %N 4 %0 Conference Proceedings %B The 7th International Conference on Advances in Mechanical Engineering and Mechanics ICAMEM 2019 Hammamet - December 16-18, %D 2019 %T The effect of the cutting conditions parameters on temperature by the Taguchi optimization method %A Mebrek, Hamama %A Ameddah, Hacene %A Mansouri, Salah %B The 7th International Conference on Advances in Mechanical Engineering and Mechanics ICAMEM 2019 Hammamet - December 16-18, %C Hammamet, Tunisia %G eng %0 Conference Proceedings %B The 7eme International Conference on Advances in Mechanical Engineering and Mechanics ICAMEM 2019, December 16-18 %D 2019 %T The effect of the cutting conditions parameters on the temperature by the Taguchi optimization method %A Mebrek, Hamama %A Amaddah, Hacene %A Mansouri, Salah %B The 7eme International Conference on Advances in Mechanical Engineering and Mechanics ICAMEM 2019, December 16-18 %C Hammamet, Tunisia %G eng %0 Conference Proceedings %B The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11, %D 2019 %T Electromechanical Analysis (MEMS) of a Capacitive Pressure Sensor of a Neuromate Robot Probe %A Ameddah, Hacene %A Bettine, Farida %A Mazouz, Hammoudi %B The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11, %C Oran, Algeria %G eng %0 Conference Proceedings %B The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11 %D 2019 %T Etude Numérique du Comportement des Endoprothèses Cardiovasculaires (Cas de Stent Biodégradable) %A Ameddah, Hacene %A Lounansa, Salim %A AMADJI, Moussa %A Mazouz, Hammoudi %B The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11 %C Oran, Algeria %G eng %0 Journal Article %J Journal of Mechanics %D 2019 %T Finite element analysis of 2-D structures by new strain based triangular element %A Cherif Rebiai %X In this investigation, a new simple triangular strain based membrane element with drilling rotation for 2-D structures analysis is proposed. This new numerical model can be used for linear and dynamic analysis. The triangular element is named SBTE and it has three nodes with three degrees of freedom at each node. The displacements field of this element is based on the assumed functions for the various strains satisfying the compatibility equations. This developed element passed both patch and benchmark tests in the case of bending and shear problems. For the dynamic analysis, lumped mass with implicit/explicit time integration are employed. The obtained numerical results using the developed element converge toward the analytical and numerical solutions in both analyses. %B Journal of Mechanics %V 35 %G eng %U https://www.cambridge.org/core/journals/journal-of-mechanics/article/abs/finite-element-analysis-of-2d-structures-by-new-strain-based-triangular-element/F670F2273F9723CE86647A67D4B33F90 %N 3 %0 Conference Proceedings %B The 7th International Conference on Advances in Mechanical Engineering and Mechanics ICAMEM 2019 Hammamet - 16-18, %D 2019 %T Finite element analysis of fatigue behavior of the biodegradable stent %A Ameddah, Hacene %A Lounansa, Salim %A Mazouz, Hammoudi %B The 7th International Conference on Advances in Mechanical Engineering and Mechanics ICAMEM 2019 Hammamet - 16-18, %C Hammamet, Tunisia %G eng %0 Conference Proceedings %B The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019) , April 10-11 %D 2019 %T Minimisation des contraintes dans les prothèses totales de genou %A Mezach, Fatima %A Ameddah, Hacene %A Mazouz, Hammoudi %B The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019) , April 10-11 %C Oran, Algeria %G eng %0 Conference Proceedings %B The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11, %D 2019 %T Numerical Study of the Behavior of Biomimetic Prosthesis “Case of the M6-C Prosthesis with Viscoelastic Core” %A AMADJI, Moussa %A Ameddah, Hacene %A Mazouz, Hammoudi %B The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11, %C Oran, Algeria %G eng %0 Journal Article %J U.P.B. Sci. Bull., Series D %D 2019 %T NUMERICAL STUDY OF THE BIOMIMETIC M6-C PROSTHESIS WITH VISCOELASTIC CORE %A AMADJI, Moussa %A Ameddah, Hacène %A Mazouz, Hammoudi %X In this work we present a new biomimetic disc prosthesis imitating the fibroreinforced osmotic, and viscoelastic properties of the biological intervertebral disc (BID). For this, we proposed to study the second-generation biomimetic prosthesis "the M6-C prosthesis" which contains two metal plates, a core and a fiber fabric. First, a 3D model was established, the finite element analysis (FEA) under the ANSYS©2015 was conducted. Secondly, a biomimetic material, the silicone rubber, was compared with the polyethylene to find the material that mimics the behavior of a biological disk. Finally, the analysis of the results found the polymer has the same mechanical properties as the nucleus pulposus, in particular the viscoelastic behaviour compared with that of polyethylene %B U.P.B. Sci. Bull., Series D %V 81 %G eng %U https://www.scientificbulletin.upb.ro/rev_docs_arhiva/full524_939736.pdf %N 4 %0 Conference Proceedings %B The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11 %D 2019 %T Traitement d’Images Médicales et Détection de Contours d’Images Echographiques pour la Reconstruction 3D %A Ameddah, Hacene %A Ghazali Mebarki %A Mazouz, Hammoudi %B The First International Conference on Innovation in Biomechanics and Biomaterials (ICIBAB 2019), April 10-11 %C Oran, Algeria %G eng %0 Conference Paper %B 2019 International Conference on Theoretical and Applicative Aspects of Computer Science (ICTAACS) %D 2019 %T Multi-level approach for controlling architecture quality with Alloy %A Salim Kadri %A Sofiane Aouag %A Djalal HEDJAZI %X

The software evolution process means the continuous control of functional and non -functional software characteristics by the change of its code without changing the properties of its quality neither the quality of its architecture. Therefore, the most important problem to be treated is how to limit the progressive shifting between the planned and the implemented architecture during the software evolution process. This phenomenon called the erosion of software architecture, often appears unexpectedly and must be controlled. In this paper, we have proposed an approach to detect erosion problems by representing tactical, strategic, and operational architectural constraints at different abstraction levels. These constraints are specified by the use of the Alloy constraint language in order to restore the deviations that may affect the description of the software architecture during the development steps. Our goal is to control architecture quality by limiting the occurrence and impact of erosion, which means the control of architecture conformance during system development and maintenance activities.

%B 2019 International Conference on Theoretical and Applicative Aspects of Computer Science (ICTAACS) %C Skikda, Algeria %V 1 %P 1-8 %8 Dec %G eng %U https://ieeexplore.ieee.org/document/8988128/authors#authors %R 10.1109/ICTAACS48474.2019.8988128 %0 Journal Article %J Pan Arab Journal of Oncology %D 2019 %T Study of dietary risk factors for breast cancer in women in the region of Batna (AGERIA). Case-control study 2014-2015 %A Chibou, Bouthayna %A Toureche, K %A H Bounecer %X

 Breast cancer is a multifactorial disease; several socioeconomic, food factors and lifestyle are incriminated in its development. It is the first cancer of women in the world and in Algeria, in terms of incidence and mortality. In Batna, the standardized incidence has doubled, from 13.6 in 2001 to 25.3 in 2011. OBJECTIVE The main objective is to study the dietary risk factors associated with the occurrence of breast cancer in women in the region of Batna. METHODS A case-control study with 1-1 matching by age and address was conducted from January 1st, 2013 to December 31rd, 2014. The total sample consisted of 160 women. RESULTS Eating fast-food every day increases the risk of breast cancer by 7 times as well as fat from red meat. Consumption of sausage and poultry skin by 5 times. Cooking vegetables in sauce increases the risk by 5 times (p <0.0001), Taking olive oil each day reduces the risk of 25% with a p <0.02, the consumption of milk mixed or not with coffee reduces the risk of one third and the fact of nibbling rarely reduced it with OR = 0,117 (0,023- 0.59) p = 0.009. DISCUSSION The associations between dietary risk factors and breast cancer are discordant in the various studies carried out in the world, our results are in line with studies but require further research

%B Pan Arab Journal of Oncology %V 12 %P 39-39 %8 2018 %G eng %U https://web.p.ebscohost.com/abstract?direct=true&profile=ehost&scope=site&authtype=crawler&jrnl=2070254X&AN=141057652&h=W8DPE4UXSA5FKKHnCspiBpi4yPQDCw%2b2smw62BdnWDWyZh%2fZgJWs4%2foebv9SX%2ffgvxYj29aRL%2bac90lDjmMMDg%3d%3d&crl=c&resultNs=AdminWebAuth&resu %N 2 %0 Conference Proceedings %B 2019 8th International Conference on Modeling Simulation and Applied Optimization (ICMSAO) %D 2019 %T 1D and 2D Numerical Validation of Lee's Evaporation Model with OpenFOAM %A Achi, Alladdine %A Demagh, Yassine %B 2019 8th International Conference on Modeling Simulation and Applied Optimization (ICMSAO) %I IEEE %P 1-5 %8 2019 %@ 1-5386-7684-2 %G eng %0 Conference Proceedings %B AIP Conference ProceedingsAIP Conference Proceedings %D 2019 %T A 1D thermal model for PTR including pressure drop and kinetic energy change within the fluid: Conventional absorber tube vs. S-curved %A Demagh, Yassine %A Bordja, Lyes %B AIP Conference ProceedingsAIP Conference Proceedings %I AIP Publishing LLC %V 2126 %P 120004 %8 2019 %@ 0-7354-1866-7 %G eng %0 Journal Article %J Applied AcousticsApplied Acoustics %D 2019 %T Acoustic performance evaluation for ducts containing porous materials %A Kani, Marwa %A Abosrea, Ahmad %A Makni, Amine %A Taktak, Mohamed %A CHAABANE, MABROUK %A Elnady, Tamer %A Haddar, Mohamed %B Applied AcousticsApplied Acoustics %V 147 %P 15-22 %8 2019 %@ 0003-682X %G eng %0 Journal Article %J Atmospheric Pollution ResearchAtmospheric Pollution Research %D 2019 %T Aerosol vertical distribution, optical properties and dust transport in the Western Mediterranean basin (case study: Summer, 2012) %A Benkhalifa, Jamel %A Léon, Jean François %A CHAABANE, MABROUK %B Atmospheric Pollution ResearchAtmospheric Pollution Research %V 10 %P 1291-1298 %8 2019 %@ 1309-1042 %G eng %0 Journal Article %J International Journal of Quality & Reliability ManagementInternational Journal of Quality & Reliability Management %D 2019 %T An alternative approach to safety integrity level determination: results from a case study, . %A OUAZRAOUI, N. %A NAIT-SAID, R. %X Purpose The purpose of this paper is to validate a fuzzy risk graph model through a case study results carried out on a safety instrumented system (SIS). Design/methodology/approach The proposed model is based on an inference fuzzy system and deals with uncertainty data used as inputs of the conventional risk graph method. The coherence and redundancy of the developed fuzzy rules base are first verified in the case study. A new fuzzy model is suggested for a multi-criteria characterization of the avoidance possibility parameter. The fuzzy safety integrity level (SIL) is determined for two potential accident scenarios. Findings The applicability of the proposed fuzzy model on SIS shows the importance and pertinence of the proposed fuzzy model as decision-making tools in preventing industrial hazards while taking into consideration uncertain aspects of the data used on the conventional risk graph method. The obtained results show that the use of continuous fuzzy scales solves the problem of interpreting results and provides a more flexible structure to combine risk graph parameters. Therefore, a decision is taken on the basis of precise integrity level values and protective actions in the real world are suggested. Originality/value Fuzzy logic-based safety integrity assessment allows assessment of the SIL in a more realistic way by using the notion of the linguistic variable for representing information that is qualitative and imprecise and, therefore, ensures better decision making on risk prevention. %B International Journal of Quality & Reliability ManagementInternational Journal of Quality & Reliability Management %V 2019 %P 1784-1803 %8 2019 %G eng %0 Journal Article %D 2019 %T Amélioration de la justesse des modèles d’hygiène du travail utilisés pour estimer des expositions professionnelles à des vapeurs de solvants %A Abattan, Spéro %A Hallé, Stéphane %A Drolet, Daniel %A Bahloul, Ali %A Ryan, Patrick Eddy %A Chouchene, Wejden %A Ruiz, Carlos Castro %A Lavoué, Jérôme %A Debia, Maximilien %8 2019 %@ 2897970928 %G eng %0 Journal Article %J Journal of Mechanical Science and TechnologyJournal of Mechanical Science and Technology %D 2019 %T Analysis of edge defects in an elastic plate using SH-waves %A Mohammedi, Brahim %A Sobh, Nahil A %A Abueidda, Diab %A Aissa, Belgacem-Bouzida %B Journal of Mechanical Science and TechnologyJournal of Mechanical Science and Technology %V 33 %P 87-94 %8 2019 %@ 1976-3824 %G eng %0 Journal Article %J International Journal of Pervasive Computing and CommunicationsInternational Journal of Pervasive Computing and Communications %D 2019 %T Ant-based delay-bounded and power-efficient data aggregation in wireless sensor networks %A Benaouda, Nadjib %A LAHLOUHI, Ammar %B International Journal of Pervasive Computing and CommunicationsInternational Journal of Pervasive Computing and Communications %8 2019 %@ 1742-7371 %G eng %0 Journal Article %J Journal of Young PharmacistsJournal of Young Pharmacists %D 2019 %T Anti-cancer Activity and Gene Expression Responses to Methanol Extract of Gladiolus segetum in THP-1 Human Monocytic Leukemia Cells %A Marref, Salah Eddine %A Naima, Benkiki %A Akram, Melakhessou Mohamed %A Joubert, Olivier %A Doumandji, Zahra Manel %A Safar, Ramia %B Journal of Young PharmacistsJournal of Young Pharmacists %V 11 %P 51 %8 2019 %@ 0975-1483 %G eng %0 Journal Article %J Journal of Herbs, Spices & Medicinal PlantsJournal of Herbs, Spices & Medicinal Plants %D 2019 %T The antioxidant, anti-inflammatory, analgesic and antipyretic activities of Juniperu thurifera %A Athamena, Souad %A Laroui, Salah %A Bouzid, Wafa %A Meziti, Asma %B Journal of Herbs, Spices & Medicinal PlantsJournal of Herbs, Spices & Medicinal Plants %V 25 %P 271-286 %8 2019 %@ 1049-6475 %G eng %0 Journal Article %J J. Cent. South UnivJ. Cent. South Univ %D 2019 %T Application of fuzzy PID controller based on genetic algorithm and particle Swarm optimization in direct torque control of double star induction motor %A Ghoulemallah Boukhalfa %A Sebti Belkacem %A Abdesselem Chikhi %A Said Benaggoune %B J. Cent. South UnivJ. Cent. South Univ %V 26 %P 1886-1896 %8 2019 %G eng %0 Conference Proceedings %B ROADEF 2019 %D 2019 %T Approche multiobjectif et hybride pour l’optimisation des décisions de récupération et de remise à neuf d’une politique de remanufacturing %A Belhocine, Latifa %A Dahane, Mohammed %A Yagouni, Mohammed %B ROADEF 2019 %8 2019 %G eng %0 Conference Proceedings %D 2019 %T Aspects clinique et résultats thérapeutique de 08 cas de LNH T/NK %A Ghodbane, A. %A Saidi, M. %C Alger, Algérie %8 2019 %G eng %0 Journal Article %J International Journal of Agricultural Resources, Governance and EcologyInternational Journal of Agricultural Resources, Governance and Ecology %D 2019 %T Assessment of ammonium hydroxide effect on Eisenia fetida (Savigny, 1826): acute toxicity and avoidance tests %A Zeguerrou, Nadia %A Adjroudi, Rachid %A Abdelkrim Si Bachir %A Okki, Mohamed El Hadef El %B International Journal of Agricultural Resources, Governance and EcologyInternational Journal of Agricultural Resources, Governance and Ecology %V 15 %P 27-44 %8 2019 %@ 1462-4605 %G eng %0 Conference Proceedings %B Second International Symposium Water Resources and Environmental Impact Assessment in North Africa (WREIANA 2019) March 25 -27 , %D 2019 %T Assessment of the capacitive function of Shallow aquifer using probabilistic and deterministic approaches (geostatistics - 3D model) %A Tarek, Drias %A Khedidja, Abdelhamid %A Moufida, Belloula %B Second International Symposium Water Resources and Environmental Impact Assessment in North Africa (WREIANA 2019) March 25 -27 , %C Sousse, Tunisia. %8 2019 %G eng %0 Journal Article %J ICOFAAS 2019ICOFAAS 2019 %D 2019 %T Association between the A1298C Polymorphism of MTHFR, Blood Folate and Vitamin B12 Deficiency, and Elevated Serum Total Homocysteine in Young Patients with myocardial İnfarction in Aures region (Algeria) %A Djaara, Hayat %A Abdelali BOUSSIF %A Belhadi, Kamilia %A OUARHLENT, Yamina %B ICOFAAS 2019ICOFAAS 2019 %V 19 %P 123 %8 2019 %G eng %0 Journal Article %J Journal of Circuits, Systems and ComputersJournal of Circuits, Systems and Computers %D 2019 %T Automated generation of synchronous formal models from SystemC descriptions %A Kalla, Hamoudi %A Berner, David %A Talpin, Jean-Pierre %B Journal of Circuits, Systems and ComputersJournal of Circuits, Systems and Computers %V 28 %P 1950061 %8 2019 %@ 0218-1266 %G eng %0 Journal Article %J Soil Mechanics and Foundation EngineeringSoil Mechanics and Foundation Engineering %D 2019 %T Bearing Capacity of an Eccentrically Loaded Strip Footing on Reinforced Sand Slope %A Abdi, A %A Abbeche, K %A Mazouz, B %A Boufarh, R %B Soil Mechanics and Foundation EngineeringSoil Mechanics and Foundation Engineering %V 56 %P 232-238 %8 2019 %@ 1573-9279 %G eng %0 Journal Article %J Electronic Journal of Structural EngineeringElectronic Journal of Structural Engineering %D 2019 %T Bearing Capacity of Strip Footing Built on Geogrid-Reinforced Sand over Soft Clay Slope and Subjected to a Vertical Load %A Hamidi, A %A Abbeche, K %B Electronic Journal of Structural EngineeringElectronic Journal of Structural Engineering %V 19 %P 23-32 %8 2019 %@ 1443-9255 %G eng %0 Journal Article %J Open Computer ScienceOpen Computer Science %D 2019 %T Bidirectional deep architecture for Arabic speech recognition %A Naima Zerari %A Samir Abdelhamid %A Hassen Bouzgou %A Christian Raymond %B Open Computer ScienceOpen Computer Science %V 9 %P 92-102 %8 2019 %@ 2299-1093 %G eng %0 Conference Proceedings %D 2019 %T Biodiversité entomologique de l’Abricotier dans la région de T’Kout et Ouled Si Slimane (Wilaya de Batna) %A Smail, CHAFAA %C TABERKA ,TUNISIE %8 2019 %G eng %0 Conference Proceedings %D 2019 %T BIO-ECOLOGIE DE LA MINEUSE DE LA TOMATE TUTA ABSOLUTA (LEPIDOPTERA : GELECHIIDAE) ET L’EVALUATION DE SES DEGATS SUR LA CULTURE DE LA TOMATE EN PLEIN CHAMP DANS LA REGION DE BATNA %A Smail, CHAFAA %C Batna, Algérie %8 2019 %G eng %0 Conference Proceedings %B 2019 4th World Conference on Complex Systems (WCCS) %D 2019 %T Biometric recognition by multimodal face and iris using FFT and SVD methods With Adaptive Score Normalization %A Mansoura, Lemmouchi %A Noureddine, Athamena %A Ouarda Assas %A Yassine, Abdessemed %B 2019 4th World Conference on Complex Systems (WCCS) %I IEEE %P 1-5 %8 2019 %@ 1-72811-232-X %G eng %0 Journal Article %J Urology Case ReportsUrology Case Reports %D 2019 %T Cancer on cryptorchid testis revealing a Persistent Müllerian Duct Syndrome: a rare case %A Samet, Ahmed %A Mseddi, Mohamed Amine %A Bahloul, Rami %A Rebai, Nouri %A Bahloul, Ali %A Slimène, Mourad Hadj %B Urology Case ReportsUrology Case Reports %V 26 %P 100977 %8 2019 %@ 2214-4420 %G eng %0 Conference Proceedings %B 1er Séminaire National sur les géosciences et l'environnement SGSE'2019. %D 2019 %T Caractérisation de potentialité aquifère du socle cristallin par les apports de la télédétection et de SIG (région de Tamanrasset) %A Yacine, Azizi %A Redha, MENANI Mohamed %A Fatih, Boucenna %A Lamine, Ag Maatallah %A Lamine, Bouaam Med %B 1er Séminaire National sur les géosciences et l'environnement SGSE'2019. %8 2019 %G eng %0 Conference Proceedings %B Le 1er Séminaire National en Géosciences et Environnement 23– 24 Octobre (SGSE-2019) %D 2019 %T Caractérisation géologique et apport de la géophysique pour la mobilisation des ressources hydriques dans le bassin de Gadaine (Ain Yagout, Algérie NE) %A Fouad, DJAIZ %A Ali, ATHAMENA %A Bachir, Lamouri %A Bousahaba, A. %A Halima, BELALITE %A Rachid, Touansa %A Soumia, Khanfer %A Manal, Marred %A Imen, Chairat %B Le 1er Séminaire National en Géosciences et Environnement 23– 24 Octobre (SGSE-2019) %C Tamanrasset, Algeria %8 2019 %G eng %U https://www.researchgate.net/profile/Athamena-Ali/publication/337603986_CARACTERISATION_GEOLOGIQUE_ET_APPORT_DE_LA_GEOPHYSIQUE_POUR_LA_MOBILISATION_DES_RESSOURCES_HYDRIQUES_DANS_LE_BASSIN_DE_GADAINE_AIN_YAGOUT_ALGERIE_NE/links/5e865d7ba6fdcca789ec8f40/CAR %0 Conference Proceedings %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins FSTGAT-USTHB 01 au 03-10- %D 2019 %T Caractérisation géologique et apport de la géophysique pour la mobilisation des ressources hydriques dans le bassin d’El Mather. %A Fouad, DJAIZ %A Hocine, Nadji %A Hmmimed, M. %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins FSTGAT-USTHB 01 au 03-10- %C Alger, Algérie %8 2019 %G eng %0 Journal Article %D 2019 %T Caractérisation hydrochimique et aptitude à l'irrigation des eaux du (CI) dans la région de Touggourt -ouargla- Oued Righ au sud algérien %A Nafaa, Brinis %8 2019 %G eng %0 Journal Article %J IEEE Sensors JournalIEEE Sensors Journal %D 2019 %T Carbon nanotube field-effect transistor with vacuum gate dielectric for label-free detection of DNA molecules: a computational investigation %A Tamersit, Khalil %A Fayçal DJEFFAL %B IEEE Sensors JournalIEEE Sensors Journal %V 19 %P 9263-9270 %8 2019 %@ 1530-437X %G eng %0 Thesis %D 2019 %T Cartographie de vulnérabilité de l&⋕39;aquifère superficiel de Biska %A Aleddine, Basli %A Nasreddine, Aksa %8 2019 %G eng %9 Master's Thesis %0 Journal Article %J International Journal of Construction ManagementInternational Journal of Construction Management %D 2019 %T Causes of schedule delays in construction projects in Algeria %A Rachid, Zemra %A Toufik, Boudouh %A Mohammed, Baheddi %B International Journal of Construction ManagementInternational Journal of Construction Management %V 19 %P 371-381 %8 2019 %@ 1562-3599 %G eng %0 Journal Article %J Geological MagazineGeological Magazine %D 2019 %T Cenomanian and lower Turonian relative chronology and palaeoenvironmental framework of the Nouader site (Aures Basin, Northeastern Algeria) %A Bensekhria, Aida %A Marmi, Ramdane %A Yahiaoui, Abdelouahab %B Geological MagazineGeological Magazine %V 156 %P 1877-1891 %8 2019 %@ 0016-7568 %G eng %0 Journal Article %J Journal of Electromagnetic Waves and ApplicationsJournal of Electromagnetic Waves and Applications %D 2019 %T Characterization of dual band and double polarized notched metallic ring FSS and their equivalent parallel metallic strip structures %A Djouimaa, Awatef %A Titaouine, Mohammed %A Saidi, Raouia %A Adoui, Ibtissem %A de Sousa, Thayuan Rollim %A Neto, Alfredo Gomes %A Baudrand, Henri %B Journal of Electromagnetic Waves and ApplicationsJournal of Electromagnetic Waves and Applications %V 33 %P 41-56 %8 2019 %@ 0920-5071 %G eng %0 Conference Proceedings %B International Conference on Electrical Engineering and Control Applications %D 2019 %T Characterization of Melanoma Using Convolutional Neural Networks and Dermoscopic Images %A Abdelghani Tafsast %A Mohamed Laid Hadjili %A Ayache Bouakaz %A Nabil Benoudjit %B International Conference on Electrical Engineering and Control Applications %I Springer %P 1147-1155 %8 2019 %G eng %0 Journal Article %J Asian-European Journal of MathematicsAsian-European Journal of Mathematics %D 2019 %T Characterization of some minimal codes for secret sharing %A Makhlouf, Sassia %A Noui, Lemnouar %B Asian-European Journal of MathematicsAsian-European Journal of Mathematics %V 12 %P 1950026 %8 2019 %@ 1793-5571 %G eng %0 Journal Article %J Journal of groundwater science and engineering.Journal of groundwater science and engineering. %D 2019 %T Characterization on Contentinetal Intercalaire Aquifer (CI) in the Tinrhert East Area-Illizi basin on the Algerian-Libyan Border, June, ISSN / e-ISSN: 2305 - 7068 / 1674-6767 %A Hamza, Belouanas %A Redha, MENANI Mohamed %X This paper addresses the characterization of the Continental Intercalaire aquifer (CI) in the Tinrhert-East area of Illizi Basin on the Algerian-Libyan border, which belongs to the SASS1 system, one of the biggest transboundary aquifers in the world. This study concerns a superficies of 4 300 km2. On the basis of Mud Logging borehole data conducted in this part of the aquifer, a realistic characterization of the aquifer was done. The thickness of the CI aquifer varies from 300 m in the south to 700 m in the north, and the depth ranges from 180 m to 320 m. The interpretation of the logs showed that the aquifer is characterized by a maximum net thickness in its southwestern part (more than 600 m), the porosity is very high, ranging from 30% in the west to 24% at the Libyan borders, the permeability is low to medium around 10-5 m/s, and the maximum transmissivity values of about 8×10-3 m2/s were recorded at the center of the study area. The depth of water varies from 235 m to 312 m, and the water flows from south to north, in accordance with the general direction observed in the CI aquifer in the Northern Sahara Aquifer System (SASS). The porosity values obtained from the interpretation of the sonic and density logs permit to estimate the water reserves of this aquifer considered fossil, at thresholds much higher than what was considered until now. %B Journal of groundwater science and engineering.Journal of groundwater science and engineering. %V vol 7 %P pp.115-132 %8 2019 %G eng %0 Journal Article %J Journal of Solid MechanicsJournal of Solid Mechanics %D 2019 %T Chip formation process using finite element simulation “Influence of Cutting Speed Variation” %A Kherraf, A %A Tamerabet, Y %A Brioua, M %A Benbouta, R %B Journal of Solid MechanicsJournal of Solid Mechanics %V 11 %P 854-861 %8 2019 %@ 2008-3505 %G eng %0 Journal Article %J Journal of Solid MechanicsJournal of Solid Mechanics %D 2019 %T Chip Formation Process using Finite Element Simulation “Influence of Cutting Speed Variation” %A Kherraf, A %A Tamerabet, Y %A M. BRIOUA %A Benbouta, R %B Journal of Solid MechanicsJournal of Solid Mechanics %V 11 %P 854-861 %8 2019 %G eng %0 Conference Proceedings %B 2019 6th international conference on control, decision and information technologies (CoDIT) %D 2019 %T Cluster head recovery algorithm for wireless sensor networks %A Titouna, Chafiq %A Hamouma Moumen %A Ari, Ado Adamou Abba %B 2019 6th international conference on control, decision and information technologies (CoDIT) %I IEEE %P 1905-1910 %8 2019 %@ 1-72810-521-8 %G eng %0 Book Section %B Technological Innovations in Knowledge Management and Decision Support %D 2019 %T A Clustering Approach Based on Cooperative Agents to Improve Decision Support in ERP %A Mesbahi, Nadjib %A Okba KAZAR %A BENHARZALLAH, Saber %A Zoubeidi, Merouane %A Rezki, Djamil %B Technological Innovations in Knowledge Management and Decision Support %I IGI Global %P 1-18 %8 2019 %G eng %0 Conference Proceedings %B er Séminaire National sur les géosciences et l'environnement SGSE'2019 %D 2019 %T Collapse susceptibility mapping for Karst sinkholes in Cheria area, NE Algeria %A Yacine, Azizi %A Redha, MENANI Mohamed %A Abderrahmane, Boumazbeur %B er Séminaire National sur les géosciences et l'environnement SGSE'2019 %8 2019 %G eng %0 Book %D 2019 %T Commande et diagnostic de la GS dans une production éolienne %A Bouslimani, Samir %A Said Drid %A Chrifi Alaoui, Larbi %X

Le choix de la Génératrice Synchrone (G.S) dans le système éolien est motivé par de nombreux avantages : Rendement élevé par rapport au générateur à induction, couplage avec l’éolienne sans le recours à un multiplicateur, absence de glissement car son rotor est excité par une source externe de tension continue. Cela lui permet de fonctionner dans une large gamme de vitesse. A cause de la complexité des nouvelles installations industrielles éoliennes, la commande de celles-ci par les correcteurs classiques donne souvent des résultats non satisfaisants. Pour surmonter ce problème, les travaux de recherches actuels s’orientent actuellement vers l’utilisation de commandes non linéaires robustes qui donnent de meilleurs résultats et dans de larges domaines de fonctionnement. Cependant, l’utilisation d’un G.S en tant que générateur électrique au sein d’un system éolien implique de nouvelles problématiques, notamment en ce qui concerne la sûreté de fonctionnement lors de défaillances internes de la machine. Il est ainsi nécessaire de connaître précisément l’état de santé du G.S afin d’assurer une bonne continuité de service.

%I Éditions universitaires européennes %8 2019 %@ 613-9-51055-4 %G eng %0 Thesis %D 2019 %T Commande robuste intelligente appliquée au suivi de trajectoires d’un système robotique %A Walid, Benaziza %8 2019 %G eng %9 Master's Thesis %0 Journal Article %J Journal of Parallel and Distributed ComputingJournal of Parallel and Distributed Computing %D 2019 %T A comparative analysis of adaptive consistency approaches in cloud storage %A Khelaifa, Abdennacer %A BENHARZALLAH, Saber %A KAHLOUL, Laid %A Euler, Reinhardt %A Laouid, Abdelkader %A Bounceur, Ahcène %B Journal of Parallel and Distributed ComputingJournal of Parallel and Distributed Computing %V 129 %P 36-49 %8 2019 %@ 0743-7315 %G eng %0 Conference Proceedings %B Conference of the Arabian Journal of Geosciences %D 2019 %T A Comparative Assessment of the Earthquake-Related Settlement in Embankment Dams Using Artificial Neural Networks and Multivariate Adaptive Regression Splines %A Zeroual, Abdelatif %A Djeddou, Messaoud %A Fourar, Ali %B Conference of the Arabian Journal of Geosciences %I Springer %P 115-118 %8 2019 %G eng %0 Journal Article %J Journal of Microwave Engineering and TechnologiesJournal of Microwave Engineering and Technologies %D 2019 %T Comparative Between (LiNbO3) and (LiTaO3) in Detecting Acoustics Microwaves Using Classification, e-ISSN 2349-9001 %A Hichem, Hafdaoui %A Djamel, Benatia %X Our work is mainly about detecting acoustics microwaves in the type of BAW (Bulk acoustic waves), where we compared between Lithium Niobate (LiNbO3) and Lithium Tantalate (LiTaO3) ,during the propagation of acoustic microwaves in a piezoelectric substrate. In this paper, We have used the classification by Probabilistic Neural Network (PNN) as a means of numerical analysis in which we classify all the values of the real part and the imaginary part of the coefficient attenuation with the acoustic velocity for conclude whichever is the best in utilization for generating bulk acoustic waves.This study will be very interesting in modeling and realization of acoustic microwaves devices (ultrasound) based on the propagation of acoustic microwaves. %B Journal of Microwave Engineering and TechnologiesJournal of Microwave Engineering and Technologies %V Volume 8 %P pp 33-43 %8 2019 %G eng %0 Journal Article %J IAES International Journal of Artificial IntelligenceIAES International Journal of Artificial Intelligence %D 2019 %T Comparative between (LiNbO3) and (LiTaO3) in detecting acoustics microwaves using classification %A Hichem, Hafdaoui %A Djamel, Benatia %B IAES International Journal of Artificial IntelligenceIAES International Journal of Artificial Intelligence %V 8 %P 33 %8 2019 %@ 2089-4872 %G eng %0 Journal Article %J Advances in Modelling and Analysis CAdvances in Modelling and Analysis C %D 2019 %T Comparative Study Between Two Control Techniques Applied on the Permanent Magnet Synchronous Machine (PMSM) %A Rouabhi, Riyadh %A Abdessemed, Rachid %A Abdelghafour, Herizi %A Moustafad, Boudia %X In this article, we present a comparative study between two control techniques applied on the Permanent Magnet Synchronous Machine (PMSM), namely vector control and fuzzy logic. This comparison is based on three criteria: qualitative, quantitative and robust during the transient and permanent operation of the system. The latter comprises a machine is driven through the stator variables by two bidirectional converters. In the first part, we have presented the individual modeling of the global chain (PMSM, Inverter, and Rectifier). Then we presented and developed the two commands techniques to control the speed and the torque produced by this machine. The results of this study made it possible to evaluate the performance of these controls. %B Advances in Modelling and Analysis CAdvances in Modelling and Analysis C %V 74 %P 51-58 %8 12 2019 %G eng %0 Conference Proceedings %B International Conference on Electrical Engineering and Control Applications %D 2019 %T A Comparative Study of MPPT Techniques for Standalone Hybrid PV-Wind with Power Management %A BOUTABBA, Tarek %A Sahraoui, Hamza %A Bechka, Mouhamed Lamine %A Said Drid %A CHRIFI-ALAOUI, Larbi %B International Conference on Electrical Engineering and Control Applications %I Springer %P 93-108 %8 2019 %G eng %0 Journal Article %J International Journal of Pharmaceutical ResearchInternational Journal of Pharmaceutical Research %D 2019 %T Comparative study of the polyphenol content related-antioxidant and anti-inflammatory activities of methanolic extracts from different parts of Hertia cheirifolia %A ABDELOUHAB, KATIA %A Aouachria, Sana %A GUEMMEZ, THORAYA %A CHAREF, NOUREDDINE %A Baghiani, Abderrahmane %A LECHE, HAYETTE LOUA %A AMAROWICZ, RYSZARD %A Arrar, Lekhmici %B International Journal of Pharmaceutical ResearchInternational Journal of Pharmaceutical Research %V 11 %8 2019 %G eng %0 Journal Article %J Silicon-NethSilicon-Neth %D 2019 %T A Comparative Study on Scaling Capabilities of Si and SiGe Nanoscale Double Gate Tunneling FETs ISSN / e-ISSN 1876-990X / 1876- 9918 %A Toufik, Bentrcia %A DJEFFAL Fayçal %A Ferhati, Hichem %A Dibi Zohir %X In the last few years, an accelerated trend towards the miniaturization of nanoscale circuits has been recorded. In this context, the Tunneling Field-Effect Transistors (TFETs) are gaining attention because of their good subthreshold characteristics, high scalability and low leakage current. However, they suffer from low values of the ON-state current and severe ambipolar transport mechanism. The aim of this work is to investigate the performance of SiGe nanoscale Double Gate TFET device including low doped drain region. The electrical performance of the considered device is investigated numerically using ATLAS 2D simulator, where both scaling and reliability aspects of the proposed design are reported. In this context, we address the impact of the channel length, traps density and drain doping parameters on the variation of some figures of merit of the device namely the swing factor and the ION/IOFF ratio. The obtained results indicate the superior immunity of the proposed design against traps induced degradation in comparison to the conventional TFET structure. Therefore, this work can offer more insights regarding the benefit of adopting channel materials and drain doping engineering techniques for future reliable low-power nanoscale electronic applications. %B Silicon-NethSilicon-Neth %P pp 1–9 %8 2019 %G eng %0 Conference Proceedings %B 2019 1st International Conference on Sustainable Renewable Energy Systems and Applications (ICSRESA) %D 2019 %T Comparison between a Passive and Active Suspension Vehicle using PID and Fuzzy Controllers with Two Entries Applied on Quarter Vehicle Model %A Soudani, Mohamed Salah %A Aouiche, Abdelaziz %A Chafaa, Kheireddine %A Aouiche, Elmoundher %A Taleb, Mounia %A Fares, Zaamouche %B 2019 1st International Conference on Sustainable Renewable Energy Systems and Applications (ICSRESA) %I IEEE %P 1-6 %8 2019 %@ 1-72815-356-5 %G eng %0 Book %D 2019 %T Comparison between Boron and Phosphorus Diffusion profiles in MOS Transistors using SILVACO ATHENA and Matlab in both 2D and 3D, %A Guenifi, Naima %A Mahamdi, R. amdane %A Rahmani, Ibrahim %X Dopant diffusion in semiconductors is a very important in process step of device. diffusion has a great influence on the electrical and electronic properties especially in the lacunary and interstitial mechanismis. This chapter investigates the diffusion of P and B in Si. The profiles have been simulated using Secondary Ion Mass Spectrometry (SIMS) modele [1,2]. In the process for manufacturing MOS transistor, the manufacturers follow basically three steps. The starting substrate is a monocrystalline silicon wafer. The first step consists in producing the polysilicon gate on a thin layer of SiO2 followed by implantation (boron) of the gate. The second step is the training of source-drain junctions by ion implantation to high dose (≈ 10 15 at / cm2) and the third is to silicide the source-drain junctions for reduce the contact resistance. One of the most promising silicides is the monosilicide of nickel (NiSi). therefore, it is very important to understand the redistribution of dopants in the different active parts of a transistor by studying the following points: • The redistribution of boron in polycrystalline silicon (gate), • The redistribution of boron in the monocrystal %I Editions universitaires europeennes %P pages 52 %8 2019 %G eng %0 Journal Article %J Heat and Mass TransferHeat and Mass Transfer %D 2019 %T Comparison of convective and infrared heating as means of drying pomegranate arils (Punica granatum L.) %A Briki, Samia %A Zitouni, Bariza %A Bechaa, Besma %A Amiali, Malek %B Heat and Mass TransferHeat and Mass Transfer %V 55 %P 3189-3199 %8 2019 %@ 1432-1181 %G eng %0 Journal Article %J Applied Thermal EngineeringApplied Thermal Engineering %D 2019 %T A comparison of mixed convective heat transfer performance of nanofluids cooled heat sink with circular perforated pin fin %A Bakhti, Fatima Zohra %A Si-Ameur, Mohamed %B Applied Thermal EngineeringApplied Thermal Engineering %V 159 %P 113819 %8 2019 %@ 1359-4311 %G eng %0 Journal Article %J Advanced electromagneticsAdvanced Electromagnetics %D 2019 %T Composite material characterization using eddy current by 3D FEM associated with iterative technique %A Hachi, Dahmane %A Benhadda, Nabil %A Helifa, Bachir %A Lefkaier, Ibn Khaldoun %A Abdelhadi, Bachir %B Advanced electromagneticsAdvanced Electromagnetics %V 8 %P 8-15 %8 2019 %@ 2119-0275 %G eng %0 Journal Article %J Aerosol Science and EngineeringAerosol Science and Engineering %D 2019 %T Computational and experimental analysis of ultrafine particle dispersion during granite polishing %A Bahloul, Ali %A Djebara, Abdelhakim %A Saidi, Mohamed Nejib %A Songmene, Victor %A Villalpando, Fernando %A Reggio, Marcelo %B Aerosol Science and EngineeringAerosol Science and Engineering %V 3 %P 21-31 %8 2019 %@ 2510-3768 %G eng %0 Journal Article %J Journal of Computational ElectronicsJournal of Computational Electronics %D 2019 %T A computationally efficient hybrid approach based on artificial neural networks and the wavelet transform for quantum simulations of graphene nanoribbon FETs %A Tamersit, Khalil %A Fayçal DJEFFAL %B Journal of Computational ElectronicsJournal of Computational Electronics %V 18 %P 813-825 %8 2019 %@ 1572-8137 %G eng %0 Journal Article %J J. King Saud UniversityJ. King Saud University %D 2019 %T Computer and information sciences %A Mezzoudj, Saliha %A Behloul, Ali %A Rachid, S %A Saadna, Yassmina %B J. King Saud UniversityJ. King Saud University %8 2019 %G eng %0 Journal Article %J Progress In Electromagnetics Research MProgress In Electromagnetics Research M %D 2019 %T Computer-Aided Design of Superconducting Equilateral Triangular Patch on Anisotropic Substrates %A Gadda, Abdelkarim %A BEDRA, Sami %A Agaba, Chahinez %A BENKOUDA, Siham %A BEDRA, Randa %A FORTAKI, Tarek %B Progress In Electromagnetics Research MProgress In Electromagnetics Research M %V 86 %P 203-211 %8 2019 %@ 1937-8726 %G eng %0 Thesis %D 2019 %T CONCEPTION D’UN AMPLIFICATEUR OPERATIONNEL ℡ESCOPIQUE EN TECHNOLOGIE CMOS 130NM %A ARAB, FATIHA %8 2019 %G eng %9 Master's Thesis %0 Thesis %D 2019 %T Conception d’un Convertisseur Analogique Numérique Flash 3 Bits en Technologie CMOS 130nm %A Souraya, Benaouina %8 2019 %G eng %9 Master's Thesis %0 Thesis %D 2019 %T Conception et réalisation d&⋕39;une antenne microruban opérant à la fréquence 2,4 GHz %A Eddine, Merabet Djamal %8 2019 %G eng %9 Master's Thesis %0 Conference Proceedings %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins FSTGAT-USTHB 01 au 03-10 %D 2019 %T Contribution à l'étude du Crétacé supérieur- Tertiaire : cas de Dj. Arhane, bassin decGhassira (Aurès central, NE Algérien) %A Benmansour, Sana %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins FSTGAT-USTHB 01 au 03-10 %C Alger, Algérie %8 2019 %G eng %0 Journal Article %D 2019 %T Contribution à l'Analyse Quantitative des Risques Industriels: Application à l'Industrie des Procédés %A Sellami, Ilyas %8 2019 %G eng %0 Conference Proceedings %B 1st National Seminar on GeoSciences and Environment SGSE 19 October 23-24, %D 2019 %T Contribution à l’étude du basin Néogène Batna-ain Touta, limite aurès-Monts de Belezma %A Soumia, Khanfer %A Fouad, DJAIZ %B 1st National Seminar on GeoSciences and Environment SGSE 19 October 23-24, %C Tamanrasset, Algeria %8 2019 %G eng %0 Conference Proceedings %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins FSTGAT-USTHB 01 au 03-10 %D 2019 %T Contribution à l’étude du crétacé supérieur-Tertiaire: Cas de Djebel Arhane, bassin de Ghassira (Aurès Central, NE Algérien. %A Marred, M. %A Kherchouche, A. %A Sana, Benmansour %A Fouad, DJAIZ %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins FSTGAT-USTHB 01 au 03-10 %C Alger, Algérie %8 2019 %G eng %0 Thesis %D 2019 %T Contribution à l&⋕39;amélioration des performances des systèmes éoliens %A Khettache, Laid %8 2019 %G eng %9 thèse de Doctorat %0 Thesis %D 2019 %T Contribution à l&⋕39;amélioration du biocapteur ISFET à base de nitrure de silicium %A Oumeima, Zeghdar %8 2019 %G eng %9 Master's Thesis %0 Thesis %D 2019 %T Contribution à l&⋕39;amélioration du rendement de cellule soalire à hétérostructures %A Kalinka, Kacha %8 2019 %G eng %9 Master's Thesis %0 Thesis %D 2019 %T Contribution à l&⋕39;étude géotechnique de la pénétrante autoritière. Trançon Eleulma Djemila %A Ahmed, Zekiri %8 2019 %G eng %9 Master's Thesis %0 Thesis %D 2019 %T Contribution à l&⋕39;étude géotechnique du viaduc de la penetrante Bir chouhada-Batnapénétrante Bir-Echouhada - Batna %A Haifa, Kehiha %A Makhloufa, Khetta %8 2019 %G eng %9 Master's Thesis %0 Thesis %D 2019 %T Contribution Au Contrôle De La Machine Synchrone Double Etoile %A Laggoun, Louanasse %8 2019 %G eng %9 Doctorat %0 Thesis %D 2019 %T Contribution l’amélioration des performances des aérogénérateurs asynchrones %A BENDJEDDOU, YACINE %8 2019 %G eng %9 Thèse de Doctorat %0 Journal Article %J Carbonates and EvaporitesCarbonates and Evaporites %D 2019 %T The contribution of fracturations in the emergence of the thermal springs in Setif city, Eastern Algeria %A Djemmal, Samir %A Menani, Mouhamed Redha %A Chamekh, Khemissi %A Baali, Fethi %B Carbonates and EvaporitesCarbonates and Evaporites %V 34 %P 21-29 %8 2019 %@ 1878-5212 %G eng %0 Conference Proceedings %B 11th World Congress on Water Resources nd Environment: Managing Water Resources for a Sustainable Future-EWRA 2019. Proceedings %D 2019 %T Contribution of remote sensing for the estimation of the sedimentation of the Beni Haroun reservoir (W. Mila, Algeria) %A Tebbi, FZ %A Dridi, H %A Kalla, M %A Baazi, H %B 11th World Congress on Water Resources nd Environment: Managing Water Resources for a Sustainable Future-EWRA 2019. Proceedings %8 2019 %G eng %0 Journal Article %J International Journal of Quality & Reliability ManagementInternational Journal of Quality & Reliability Management %D 2019 %T Contribution of the three-dimensional model to the reliability allocation of multiphase systems", , 2019, :. %A SAADI, S. %A M. Djebabra, M. Mouda and D. Belala, %A ROUDIES, O. %A BOULAGOUAS, W. %X Purpose The purpose of this paper is to deal with the allocation requirements of the dependability of the multiphase systems. Design/methodology/approach It consists of a proposal for a combined methodology based on the simultaneous use of decomposition systems and reliability allocation method. Findings In the developed methodology, the authors use the principles of risk assessment and propose a new formulation of weight allowance with reference to the structural-functional dependence. Practical implications The suggested methodology provides invaluable help to implementation process analysis. Originality/value The adopted allocation approach is based on the use of a three-dimensional model: temporal, structural and functional decomposition of systems. %B International Journal of Quality & Reliability ManagementInternational Journal of Quality & Reliability Management %V 2019 %P 1038-1052 %8 2019 %G eng %0 Journal Article %J International Journal of Quality & Reliability ManagementInternational Journal of Quality & Reliability Management %D 2019 %T Contribution of the three-dimensional model to the reliability allocation of multiphase systems %A Saadia Saadi %A Mébarek Djebabra %A Ounsa Roudies %A Wafa Boulagouas %B International Journal of Quality & Reliability ManagementInternational Journal of Quality & Reliability Management %8 2019 %@ 0265-671X %G eng %0 Journal Article %J World Journal of Science, Technology and Sustainable DevelopmentWorld Journal of Science, Technology and Sustainable Development %D 2019 %T Contribution to the evaluation of safety barriers performance %A HADEF, H. %A M. Djebabra, M. Mouda and D. Belala, %A SEDRAT, L. %A TAGHLABET, M. %X Purpose The risk control is an unavoidable step in the risk management process. It is materialized by concrete actions of risks reduction in order to decrease their likelihood and/or their severity and also to preserve the environment. The paper aims to discuss this issue. Design/methodology/approach The main goal of the proposed methodology is to define the safety barriers (SB) that can be realized and their contribution to reduce major accidents scenarios that may occur in high-risk establishments. Findings In the proposed methodology, the authors present a combination of methods to prove the effectiveness of SB in an industrial installation. Practical implications The proposed methodology is a valuable help to industrialists to secure their industrial activities and preserve the environment at the same time. Originality/value The retained methods are often used separately for audit purposes or risk assessments of high-risk industrial facilities. In this paper, three methods have been selected and articulated in an approach for a better evaluation of risk control level. %B World Journal of Science, Technology and Sustainable DevelopmentWorld Journal of Science, Technology and Sustainable Development %V 2019 %P 56-68 %8 2019 %G eng %0 Thesis %D 2019 %T Contribution to the modeling and optimization of new optoélectronic devices %A Hichem, Ferhati %8 2019 %G eng %9 Master's Thesis %0 Conference Proceedings %B 2019 IEEE International Conference on Systems, Man and Cybernetics (SMC) %D 2019 %T Contribution to the optimisation of products recovery and remanufacturing: a multiobjective non-dominated sorting genetic algorithm based hybrid approach %A Belhocine, Latifa %A Dahane, Mohammed %A Yagouni, Mohammed %B 2019 IEEE International Conference on Systems, Man and Cybernetics (SMC) %I IEEE %P 134-139 %8 2019 %@ 1-72814-569-4 %G eng %0 Journal Article %J Computers & Electrical EngineeringComputers & Electrical Engineering %D 2019 %T Control and study of a real wind turbine %A Dahbi, Abdeldjalil %A Reama, Abdellatif %A Hamouda, Messaoud %A Nasreddine NAIT-SAID %A Nait-Said, Mohamed-Said %B Computers & Electrical EngineeringComputers & Electrical Engineering %V 80 %P 106492 %8 2019 %@ 0045-7906 %G eng %0 Journal Article %J MOJ Food Processing and TechnologyMOJ Food Processing and Technology %D 2019 %T Convective solar drying of spinach leaves %A Siabdallah, N %A Ferhat, R %A Lahbari, M %A Fahloul, D %B MOJ Food Processing and TechnologyMOJ Food Processing and Technology %V 7 %P 22-25 %8 2019 %G eng %0 Thesis %D 2019 %T Coupe de Dj BouArif : Etude lithostratigraphique, sédimentologique et réflexions paléoenvironnementales à partir de l’étude de la faune et de la microfaune (Aurès, Batna). %A tahar, Bessariani %A Imed, Guettaoui %8 2019 %G eng %9 Master's Thesis %0 Journal Article %J High Temperatures--High PressuresHigh Temperatures--High Pressures %D 2019 %T Critical behaviour of binary mixtures: calculation by the Heidemann-Khalil Method. %A Hichem GRINE %A Hakim MADANI %A Fedali, Saida %B High Temperatures--High PressuresHigh Temperatures--High Pressures %V 48 %8 2019 %@ 0018-1544 %G eng %0 Journal Article %J Journal of Applied Mathematics and Computational MechanicsJournal of Applied Mathematics and Computational Mechanics %D 2019 %T Critical seismic coefficients of homogeneous earth dams prediction by a FELA-ANN approach %A Abdelatif, Zeroual %A Ali, Fourar %A Messaoud, Djeddou %B Journal of Applied Mathematics and Computational MechanicsJournal of Applied Mathematics and Computational Mechanics %V 18 %P 5-16 %8 2019 %G eng %0 Journal Article %J Materials for Renewable and Sustainable EnergyMaterials for Renewable and Sustainable Energy %D 2019 %T CuIn0. 7Ga0. 3Se2 thin films’ properties grown by close-spaced vapor transport technique for second-generation solar cells %A Oulmi, N %A Bouloufa, A %A Benhaya, A %A Mayouche, R %B Materials for Renewable and Sustainable EnergyMaterials for Renewable and Sustainable Energy %V 8 %P 1-8 %8 2019 %@ 2194-1467 %G eng %0 Conference Proceedings %B Journée de célébration de la journée mondiale du SIDA %D 2019 %T Dépistage de l’infection VIH et des hépatites virales %A Tebbal, Soraya %B Journée de célébration de la journée mondiale du SIDA %8 2019 %G eng %0 Conference Proceedings %D 2019 %T Description clinique, biologique et pronostique d&⋕39;une série de 114 patients présentant une leucémie myéloïde chronique: étude mono centrique sur une période de 10 ans %A Soltani, F. %A Kacha, F. %A Saidi, M. %C Alger, Algérie %8 2019 %G eng %0 Thesis %D 2019 %T Design of a 10-Bit Successive Approximation Type Analog to Digital Converter Using TSMC 130nm CMOS Technology %A Elhassen, Abdessamed %8 2019 %G eng %9 Master's Thesis %0 Journal Article %J UPB Sci. BullUPB Sci. Bull %D 2019 %T Design of robust control using fuzzy logic controller for doubly fed-induction motor drives %A Zidani, Mohamed Yazid %A Youb, Lamia %A Sebti Belkacem %A Naceri, Farid %B UPB Sci. BullUPB Sci. Bull %V 81 %P 159-170 %8 2019 %G eng %0 Journal Article %J International Journal of Parallel, Emergent and Distributed SystemsInternational Journal of Parallel, Emergent and Distributed Systems %D 2019 %T Detection of pollution terms in nonlinear second order wave systems %A Merabet, A %A Ayadi, A %A Omrane, Abdennebi %B International Journal of Parallel, Emergent and Distributed SystemsInternational Journal of Parallel, Emergent and Distributed Systems %V 34 %P 13-20 %8 2019 %@ 1744-5760 %G eng %0 Thesis %D 2019 %T Détermination de la hauteur de crête pour le fraisage en bout : application aux fraises de forme %A Sifeddine, MEKKENTICHI %A Eddine, DJABALI Salem Chihab %8 2019 %G eng %9 Master's Thesis %0 Journal Article %D 2019 %T Determination of magnetic properties of a Ni/NiO/Ni multilayer: an ANFIS-based predictive techniqueAppl. Phys. A 125: 56 %A A. Bendjerad %A A. Benhaya %A T. Bentercia %A F.Djeffal %A M. Zergoug %A F. Smaili %8 2019 %G eng %0 Journal Article %J Applied Physics AApplied Physics A %D 2019 %T Determination of magnetic properties of a Ni/NiO/Ni multilayer:an ANFIS-based predictive technique, ISSN / e-ISSN 0947-8396 / 1432-0630 %A Adel, Bendjerad %A A. Benhaya %A Toufik, Bentrcia %A DJEFFAL Fayçal %A M. Zergoug %A F. Smaili %X In this paper, Ni/NiO/Ni multilayers are deposited on glass substrates using radio frequency magnetron sputtering, where the structural and morphological properties are analyzed using X-ray diffraction besides scanning electron microscopy techniques. The associated magnetic hysteresis loops are obtained by vibrating sample magnetometer for temperatures ranging from - 100 to 300 °C. Hence, the parameters α, β, Bmax, HC, and Br defining a hysteresis loop are determined at each temperature using Preisach model for the first two parameters, while the remaining ones are deduced experimentally. The set of these parameters are introduced within the training data set in the context of an ANFIS-based approach to predict the hysteresis loop of a Ni/NiO/Ni multilayer for any temperature below the Curie temperature. The comparison conducted between theoretical and experimental results showed a good agreement. This work provided more insights regarding the consolidation of experimental characterization with the development of soft computing-based frameworks. %B Applied Physics AApplied Physics A %V volume 125 %P pp 56 %8 2019 %G eng %0 Journal Article %J Asymptotic AnalysisAsymptotic Analysis %D 2019 %T Diffusion process in a perforated domain around a vanishing suspension %A Chennouf, Selwa %A Bentalha, Fadila %B Asymptotic AnalysisAsymptotic Analysis %V 115 %P 127-145 %8 2019 %@ 0921-7134 %G eng %0 Journal Article %J U.P.B. Sci. Bull., Series CU.P.B. Sci. Bull., Series C %D 2019 %T DIRECT TORQUE CONTROL ( DTC-SVM ) OF PMSG BASED IN WIND ENERGY CONVERSION SYSTEM %A Bensaadi, Hacene %A Harbouche, Youcef %A Abdessmed, Rachid %X This paper presents a comparative study between two strategies for the direct torque control (DTC) of the permanent magnet synchronous generator (PMSG) based on wind energy conversion system (WECS). The first method is a conventional direct torque control DTC and it is based on hysteresis controllers where the torque and the flux are regulated by these controllers. The second one is direct torque control by space vector modulation strategy (DTC-SVM) where the torque and flux are regulated by PI controllers. The simulation results are implemented by using MATLAB/SIMULINK. The main feature of the proposed (DTC-SVM) strategy is the reduction of torque and flux ripples. The proposed approach can be considered as an alternative solution to the control of PMSG. %B U.P.B. Sci. Bull., Series CU.P.B. Sci. Bull., Series C %V 81 %8 2019 %G eng %0 Conference Proceedings %B International Conference on Electrical Engineering and Control Applications %D 2019 %T Direct torque control using fuzzy second order sliding mode speed regulator of double star permanent magnet synchronous machine %A Laggoun, Louanasse %A Kiyyour, Brahim %A Ghoulemallah Boukhalfa %A Sebti Belkacem %A Said Benaggoune %B International Conference on Electrical Engineering and Control Applications %I Springer %P 139-153 %8 2019 %G eng %0 Journal Article %J Journal of Solid MechanicsJournal of Solid Mechanics %D 2019 %T Displacement fields influence analysis caused by dislocation networks at a three layer system interfaces on the surface topology %A Boussaha, A %A Makhloufi, R %A Madani, S %B Journal of Solid MechanicsJournal of Solid Mechanics %V 11 %P 606-614 %8 2019 %@ 2008-3505 %G eng %0 Journal Article %J Oceanological and Hydrobiological StudiesOceanological and Hydrobiological Studies %D 2019 %T Diversity and distribution patterns of benthic insects in streams of the Aurès arid region (NE Algeria) %A Ghougali, Fayssal %A Abdelkrim Si Bachir %A Chaabane, Nassima %A Brik, Imen %A Medjber, Rachid Ait %A Rouabah, Abdelhak %B Oceanological and Hydrobiological StudiesOceanological and Hydrobiological Studies %V 48 %P 31-42 %8 2019 %@ 1897-3191 %G eng %0 Journal Article %J The Canadian EntomologistThe Canadian Entomologist %D 2019 %T Diversity of insects associated with olive (Oleaceae) groves across a dryland climate gradient in Algeria %A Chafaa, Smail %A Mimeche, Fateh %A Chenchouni, Haroun %X This study investigated insect diversity of olive (Olea europaea Linnaeus (Oleaceae)) groves grown in arid and semiarid climates in northeastern Algeria. Using several sampling techniques, a total of 1326 insect specimens were collected and identified into 151 species, 124 genera, 65 families, and 10 orders. Hymenoptera and Coleoptera were quantitatively the most abundant, whereas the dominant functional feeding groups were phytophages then predators. The entomofauna included several olive pests such as Bactrocera oleae (Rossi) (Diptera: Tephritidae), Parlatoria oleae (Colvée) (Hemiptera: Diaspididae), Euphyllura olivina (Costa) (Hemiptera: Liviidae), and Liothrips oleae Costa (Thysanoptera: Phlaeothripidae). Although insect diversity parameters recorded for both observed and expected species richness were higher in olive groves grown under semiarid compared with arid climate, the completeness rate of species richness obtained using the nonparametric incidence estimators was higher in arid olive groves. Generalised linear models showed that the number of individuals and species richness varied significantly between climates (P < 0.01), whereas the variation of the rest of diversity parameters was not significant. Diversity traits of insect assemblage of each climatic region were positively correlated. Besides, the Mantel permutation test revealed similar patterns (r = 0.91, P < 0.0001) between correlation matrices of the two climates. When increasing the number of samples, species richness extrapolation revealed that diversity is expected to increase by 130% in olive groves grown under arid climate and 93% in semiarid climate. These increases are related to continuous appearance of rare and scarce insects as demonstrated by species rarefaction curves. Even with high evenness values of insect communities, similarity was low between climate indicating the rarity and scarcity of populations. %B The Canadian EntomologistThe Canadian Entomologist %V 151 %P 629 - 647 %8 2019 %G eng %0 Journal Article %J Computer NetworksComputer Networks %D 2019 %T DODS: A distributed outlier detection scheme for wireless sensor networks %A Titouna, Chafiq %A Naït-Abdesselam, Farid %A Khokhar, Ashfaq %B Computer NetworksComputer Networks %V 161 %P 93-101 %8 2019 %@ 1389-1286 %G eng %0 Journal Article %J International Journal of Information Science and TechnologyInternational Journal of Information Science and Technology %D 2019 %T Dual simplex method for optimal coordination of DOCR’s in distribution system with D-FACTS %A CHAGHI, ABDELAZIZ %B International Journal of Information Science and TechnologyInternational Journal of Information Science and Technology %V 3 %P 3-9 %8 2019 %@ 2550-5114 %G eng %0 Journal Article %J International Journal of Information Science and TechnologyInternational Journal of Information Science and Technology %D 2019 %T Dual Simplex Method for Optimal Coordination of DOCR’s in Distribution System with D-FACTS %A A. Chaghi %X The problem of setting and coordination of Directional Over-Current Relay (DOCR) is a highly constrained optimization problem that has been solved as a linear programming problem. The calculation of the time dial setting (TDS) and pick up current (I P) setting of the relays is the core of the coordination. This paper calculates the TDS by choosing one of the available pick up current settings as the predetermined value, in this paper it will be set at 0.5, 1 and 1.5. The LP Dual simplex method is used to determine the optional TDS of the relays in compensated system by series FACTS devises ie Thyristor Controlled Series Capacitor (TCSC). A sample system of IEEE 33 bus distribution system is used to demonstrate the feasibility and efficiency of the developed method. %B International Journal of Information Science and TechnologyInternational Journal of Information Science and Technology %V 3 N° 3 %P 3-9 %8 2019 %G eng %0 Journal Article %J International Journal of System Assurance Engineering and ManagementInternational Journal of System Assurance Engineering and Management %D 2019 %T Dynamic behavior analysis under a grid fault scenario of a 2 MW double fed induction generator-based wind turbine: comparative study of the reference frame orientation approach %A Cheikh, Ridha %A Belmili, Hocine %A Menacer, Arezki %A Said Drid %A CHRIFI-ALAOUI, Larbi %B International Journal of System Assurance Engineering and ManagementInternational Journal of System Assurance Engineering and Management %V 10 %P 632-643 %8 2019 %@ 0976-4348 %G eng %0 Journal Article %J Future Generation Computer SystemsFuture Generation Computer Systems %D 2019 %T EDAK: An Efficient Dynamic Authentication and Key Management Mechanism for heterogeneous WSNs %A SamirAthmani %A Azeddine Bilami %A Djallel Eddine Boubiche %X Securing the network communication represents one of the most important challenges in wireless sensor networks. The key distribution problem has been widely discussed in classical wireless sensor networks contrarily to heterogeneous ones. HWSNs (Heterogeneous Wireless Sensor Networks) have optimized the network capability and opened new security opportunities by introducing high resource capacity sensor nodes in the network. In this paper, an efficient dynamic authentication and key Management scheme is proposed for heterogeneous WSN. The main idea is to provide a single lightweight protocol for both authentication and key establishment while optimizing the security level. The key distribution algorithm is based on preexisting information to generate dynamic keys and does not require any secure channel and sharing phase which improves the security, energy efficiency and reduces the memory consumption. Experimental results have confirmed the performances of our mechanism compared to some of the existing security protocols. %B Future Generation Computer SystemsFuture Generation Computer Systems %V 92 %P 789-799 %8 2019 %G eng %0 Journal Article %J Instrum. Mes. MétrologieInstrum. Mes. Métrologie %D 2019 %T An Eddy Current Nondestructive Method for Crack Detection in Multilayer Riveted Structures %A Abdou, Abdelhak %A Safer, Omar Adib %A Bouchala, Tarik %A Bendaikha, Abdelmalik %A Abdelhadi, Bachir %A Guettafi, Amor %A Benoudjit, Azzedine %B Instrum. Mes. MétrologieInstrum. Mes. Métrologie %V 18 %P 485-490 %8 2019 %G eng %0 Journal Article %J Journal of Nano-and Electronic PhysicsJournal of Nano-and Electronic Physics %D 2019 %T Effect of Broken Fiber on Stress Transfer of Short Fiber Reinforced Thermoplastic Matrix Composite %A Mansouri, K %A M. BRIOUA %A Djebaili, H %A Ghelani, L %A Chitour, M %B Journal of Nano-and Electronic PhysicsJournal of Nano-and Electronic Physics %V 11 %8 2019 %G eng %0 Journal Article %J Current Gene TherapyCurrent Gene Therapy %D 2019 %T Effect of tumor suppressor miR-34a loaded on ZSM-5 nanozeolite in hepatocellular carcinoma: In vitro and in vivo approach %A Salah, Zeinab %A Abd El Azeem, Eman M %A Youssef, Hanan F %A Gamal-Eldeen, Amira M %A Farrag, Abdel R %A El-Meliegy, Emad %A Soliman, Bangly %A Elhefnawi, Mahmoud %B Current Gene TherapyCurrent Gene Therapy %V 19 %P 342-354 %8 2019 %@ 1566-5232 %G eng %0 Journal Article %J Studia Geotechnica et MechanicaStudia Geotechnica et Mechanica %D 2019 %T Effective width rule in the analysis of footing on reinforced sand slope %A Abdi, Abdelmadjid %A Abbeche, Khelifa %A Athmania, Djamel %A Bouassida, Mounir %B Studia Geotechnica et MechanicaStudia Geotechnica et Mechanica %V 41 %P 42-55 %8 2019 %G eng %0 Journal Article %J Superlattices and MicrostructuresSuperlattices and Microstructures %D 2019 %T Effects of annealing temperature and ITO intermediate thin-layer on electrical proprieties of Au/p-Si structure deposited by RF magnetron sputtering, ISSN 0749-6036 %A DJEFFAL Fayçal %A Hichem, Ferhati %A A. Benhaya %A Adel, Bendjerad %X In this paper, a new Au/p-Si Schottky Barrier Diode (SBD) based on Indium Tin Oxide (ITO) intermediate thin-film is proposed and experimentally investigated by including the annealing temperature effect. We elaborated the Au/ITO/p-Si structure by means of RF magnetron sputtering technique and compared its electrical properties with the conventional Au/p-Si SBD. The role of the annealing process at 200 and 400 °C as well as the ITO interface thin-layer in improving the SBD basic electrical parameters is analyzed. The characterization has revealed that a higher Schottky barrier (ϕb) of 0.79V is achieved. Moreover, close to unit ideality factor of (n = 1.25) and reduced density of states (Nss = 1.5 × 1012cm-2) and series resistance of (Rs = 32Ω) are recorded. These achievements can be attributed to the enhanced interface quality provided by introducing the ITO thin-film. Moreover, the annealing process enables improved crystallinity and allows efficient rearrangement of atoms at the interfaces. The thermal stability behavior of the investigated designs is analyzed, where new Figure of Merit (FoMs) parameters are proposed. It is found that the annealed Au/ITO/p-Si structure offers the opportunity for suppressing the degradation related-heating effects. Therefore, the proposed Au/ITO/p-Si SBD pinpoint a new path toward achieving superior electrical characteristics and improved thermal stability, which makes it a potential alternative for high-performance microelectronic and optoelectronic applications. %B Superlattices and MicrostructuresSuperlattices and Microstructures %V Volume 128 %P pp 382-391 %8 2019 %G eng %0 Journal Article %J Computational Thermal Sciences: An International JournalComputational Thermal Sciences: An International Journal %D 2019 %T Effects of discrete controllers on the stabilization of natural convection induced by internal heat generation in a shallow cavity %A Mebrouki, A %A Zineddine, Alloui %A Vasseur, Patrick %B Computational Thermal Sciences: An International JournalComputational Thermal Sciences: An International Journal %V 11 %8 2019 %@ 1940-2503 %G eng %0 Journal Article %J Superlattices and MicrostructuresSuperlattices and Microstructures %D 2019 %T Effects of high temperature annealing in enhancing the optoelectronic performance of sputtered ITO/Ag/ITO transparent electrodes, ISSN 0749-6036 %A DJEFFAL Fayçal %A Hichem, Ferhati %A A. Benhaya %A Adel, Bendjerad %X In this paper, a transparent conductive ITO/Ag/ITO (IAI) multilayer structure with a high Haacke Figure of Merit (FoM) far surpassing those found up to now is experimentally demonstrated. An optimized IAI multilayer electrode was elaborated by means of RF magnetron sputtering technique. The structural and electrical characteristics of the prepared tri-layered design were investigated. The influence of the annealing process on the IAI electrode performance was also carried out. Unlike the IAI structure as-deposited, it was revealed that the annealed samples maintained an average transparency superior than 89%. This behavior indicates the effectiveness of the thermal treatment for ensuring favorable light management. In addition, it was found that the annealing process paves a new path toward improving the electrode conductivity, where the heat treated electrode at 600°C yielded a very low sheet resistance of 2.95Ω × sq-1. Therefore, by well optimizing both IAI geometry and annealing conditions, we were able to elaborate high-quality coating with a superior FoM of 120.8 × 10-3Ω-1. This makes the sputtered IAI multilayer design a suitable alternative to the conventional ITO-based electrodes for optoelectronic and photovoltaic applications. %B Superlattices and MicrostructuresSuperlattices and Microstructures %V Volume 130 %P pp 361-368 %8 2019 %G eng %0 Journal Article %J Progress In Electromagnetics Research CProgress In Electromagnetics Research C %D 2019 %T Effects of Superstrate Layer on the Resonant Characteristics of Superconducting Rectangular Microstrip Patch Antenna, e-ISSN 1937-8718 %A Sami, Bedra %A Tarek, Fortaki %X The resonant characteristics of superconducting rectangular microstrip patch antenna witha superstrate layer are investigated using a full-wave spectral analysis in conjunction with the complexresistive boundary condition. The complex surface impedance of superconducting patch is determinedusing London’s equation and the two-fluid model of Gorter and Casimir. Numerical results using thefull-wave analysis presented here are in excellent agreement with theoretical and experimental resultsavailable in the open literature. Numerical results show that the effect of the superstrate layer on theresonant frequency and half-power bandwidth of the superconducting rectangular patch is stronger thanthat of the structure without superstrate layer as both the thickness and permittivity of the superstrateincrease. Finally, numerical results concerning the effects of the parameters of superstrate-substrateand superconducting patch on the antenna performance are also presented and discussed %B Progress In Electromagnetics Research CProgress In Electromagnetics Research C %V Volume 62 %P pp 57–165 %8 2019 %G eng %0 Journal Article %J Renewable energyRenewable energy %D 2019 %T Effects of tray shape of a multi-stage solar still coupled to a parabolic concentrating solar collector in Algeria %A Abdessemed, Amina %A Bougriou, Cherif %A Guerraiche, Djemaa %A Abachi, Rabah %B Renewable energyRenewable energy %V 132 %P 1134-1140 %8 2019 %@ 0960-1481 %G eng %0 Journal Article %D 2019 %T Effets du couplage des réponses vibrations des lignes d'arbres du carter et des dentures sur l'architecture d’une transmission par engrenage-Application aux boites de vitesses des machines-outils %A Djemoui, Mohamdi %8 2019 %G eng %0 Conference Proceedings %D 2019 %T Effets du dichromate de patassium sur la ligne lymphocytaire et leucocytaire chez la rate gestante Albinos Wistar %A Asma, Saouli %C Université Mostefa BEN BOULAID- Batna 2 %8 2019 %G eng %0 Conference Proceedings %B International Workshop on Distributed Computing for Emerging Smart Networks %D 2019 %T An efficient fault-tolerant scheduling approach with energy minimization for hard real-time embedded systems %A Barkahoum Kada %A Kalla, Hamoudi %B International Workshop on Distributed Computing for Emerging Smart Networks %I Springer %P 102-117 %8 2019 %G eng %0 Journal Article %J International Journal BioautomationInternational Journal Bioautomation %D 2019 %T Efficient Filtering Framework for Electrocardiogram Denoising %A Asma, Tinouna %A Mouna, Ghanai %A Assam, Ouali Mohammed %A Kheireddine, CHAFAA %B International Journal BioautomationInternational Journal Bioautomation %V 23 %P 403 %8 2019 %@ 1314-1902 %G eng %0 Journal Article %J Pattern Recognition and Image AnalysisPattern Recognition and Image Analysis %D 2019 %T An efficient human activity recognition technique based on deep learning %A Aziz Khelalef %A Fakhreddine Ababsa %A Nabil Benoudjit %B Pattern Recognition and Image AnalysisPattern Recognition and Image Analysis %V 29 %P 702-715 %8 2019 %@ 1555-6212 %G eng %0 Journal Article %J ournal of Physics Condensed Matterournal of Physics Condensed Matter %D 2019 %T Electron-phonon dynamics in 2D carbon based-hybrids XC (X = Si, Ge, Sn), ISSN / e-ISSN 0953-8984 / 1361-648X %A L.B.Drissi %A Junior, Kanga %A Lounis, Samir %A DJEFFAL Fayçal %A S.Haddad %X The effect of the presence of electron–phonon (e–ph) coupling in the SiC, GeC and SnC hybrids is studied in the framework of the ab initio perturbation theory. The electronic bang gap thermal dependence reveals a normal monotonic decrease in the SiC and GeC semiconductors, whereas SnC exhibits an anomalous behavior. The electron line widths were evaluated and the contributions of acoustic and optical phonon modes to the imaginary part of the self-energy were determined. It has been found that the e–ph scattering rates are globally controlled by the out-of-plane acoustic transverse mode ZA in SiC while both ZA and ZO are overriding in GeC. In SnC, the out-of-plane transverse optical mode ZO is the most dominant. The relaxation lifetime of the photo-excited electrons shows that the thermalization of the hot carrier occurs at 90 fs, 100 fs and 120 fs in SiC, GeC and SnC, respectively. The present study properly describes the subpicosecond time scale after sunlight illumination using an approach that requires no empirical data. The results make the investigated structures suitable for providing low cost and high-performance optical communication and monitoring applications using 2D materials. %B ournal of Physics Condensed Matterournal of Physics Condensed Matter %V Volume 31 %P pp 135702 %8 2019 %G eng %0 Journal Article %J Acta Biochimica PolonicaActa Biochimica Polonica %D 2019 %T Epigenetic modifiers 5-aza-2′-deoxycytidine and valproic acid differentially change viability, DNA damage and gene expression in metastatic and non-metastatic colon cancer cell lines %A Ghecham, Abdelmoudjib %A Senator, Abderrahmane %A Pawlowska, Elzbieta %A Bouafia, Wafa %A Błasiak, Janusz %B Acta Biochimica PolonicaActa Biochimica Polonica %V 66 %P 355-360 %8 2019 %@ 1734-154X %G eng %0 Conference Proceedings %B 1st National Seminar on GeoSciences and Environment SGSE 19 October 23-24, %D 2019 %T Essai de caracterisation lithostratigraphiques et paléoenvironnementdes formations Eocène du bassin de Ghassira : Coupe du Kef El-Arous (Aurès Central, NE Algérien) %A Manal, Marred %A Fouad, DJAIZ %A Abdellah, Boushaba %A Bachir, Lamouri %A Adila, Kherchouche %B 1st National Seminar on GeoSciences and Environment SGSE 19 October 23-24, %C Tamanrasset, Algeria %8 2019 %G eng %0 Conference Proceedings %D 2019 %T ESTIMATION DES DEGATS OCCASIONNES PAR SITOPHILUS ORYZAE L. (COLEOPTERA : CURCUUONIDAE)SUR LES POIS STOCKES DANS LA WILAYA DE BATNA (EST ALGERIE) %A Smail, CHAFAA %C Batna, Algérie %8 2019 %G eng %0 Thesis %D 2019 %T Etude bibliographique sur les revêtements des outils de coupe %A Ramzi, BOUDIAF %A Anisse, S. A. I. %8 2019 %G eng %9 Master's Thesis %0 Conference Proceedings %D 2019 %T ETUDE BIOECOLOGIQUE DU PSYLLE DE L’OLIVIER EUPHYLLURA OLIVINA COSTA 1839 (HEMIPTERA : PSYLLIDAE) DANS LA REGION D’EL-DJALFA %A Smail, CHAFAA %C Batna, Algérie %8 2019 %G eng %0 Conference Proceedings %D 2019 %T Etude de la toxicité rénale du chlorure de nickel chez la rate gestante Albinos Wistar %A Imane, Salah %C Université Mostefa BEN BOULAID- Batna 2, Algérie %8 2019 %G eng %0 Conference Proceedings %B The international conference on innovative materials, manufacturing, and advanced technologies (IMMAT’2019), 17-19 Octobre 2019, %D 2019 %T Etude de l’influence de quelques paramètres sur la stabilité du fraisage des parois minces avec tracé des lobes de stabilité %A AZOUI Cherifa %A BENMOHAMMED Brahim %B The international conference on innovative materials, manufacturing, and advanced technologies (IMMAT’2019), 17-19 Octobre 2019, %C Monastir Tunisie %8 2019 %G eng %0 Thesis %D 2019 %T Etude de l&⋕39;influence de la géométrie de l&⋕39;outil de coupe et des paramètres de coupe sur la rugosité de la surface %A Billal, HIBECHE %8 2019 %G eng %9 Master's Thesis %0 Conference Proceedings %B Troisième colloque Maghrébin sur la Chimie Hétérocyclique CMCH3-2019- Palais des Sciences de MESRS 28-29 juin . %D 2019 %T Etude des metabolites secondaires de la plante Cytisus purgans %A Badra, BOUZGHAIA %B Troisième colloque Maghrébin sur la Chimie Hétérocyclique CMCH3-2019- Palais des Sciences de MESRS 28-29 juin . %C Monastir Tunisie %8 2019 %G eng %0 Thesis %D 2019 %T Etude des micro-actionneurs électrostatiques %A Ahmed, Belkars %8 2019 %G eng %9 Master's Thesis %0 Thesis %D 2019 %T Etude et réalisation d&⋕39;un appareil de mesure de la réponse des capeturs aux ultraviolets %A Nouha, Belkacemi %A Abdelkarim, Laidani %8 2019 %G eng %9 Master's Thesis %0 Thesis %D 2019 %T Etude et réalisation d&⋕39;une serrure intelligente "Smart Lock" %A Bouhafna, Allaeddine %A Abderraouf, Bouguenna %8 2019 %G eng %9 Master's Thesis %0 Conference Proceedings %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins FSTGAT-USTHB 01 au 03-10- %D 2019 %T Etude lithostratigraphique et analyse séquentielle de la région de Maafa- synclinal de Béni Fedhala (Aurès, Atlas Saharien Oriental) %A Sana, Benmansour %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins FSTGAT-USTHB 01 au 03-10- %C Alger, Algérie %8 2019 %G eng %0 Journal Article %D 2019 %T Etude numérique d’une nouvelle configuration des tubes absorbeurs de forme sinusoïdale dans les concentrateurs cylindro-paraboliques %A Drihem, Ahmed Yacine %8 2019 %G eng %0 Journal Article %J European Journal of Electrical EngineeringEuropean Journal of Electrical Engineering %D 2019 %T European Journal of Electrical Engineering %A Moussa, Oussama %A Abdessemed, Rachid %A Said Benaggoune %A Benguesmia, Hani %B European Journal of Electrical EngineeringEuropean Journal of Electrical Engineering %V 21 %P 421-430 %8 2019 %G eng %0 Conference Proceedings %D 2019 %T Evaluation de l’hepatotoxicite induite par le dichromate de potassium chez les rates gestantes de la souche albinos wistar %A Anfal, Fedala %A Adjroud, Ounassa %A Saouli, Asma %C Université Mostefa BEN BOULAID- Batna 2, Algérie %8 2019 %G eng %0 Thesis %D 2019 %T Evaluation du transport solide au niveau du bassin versant d&⋕39;Oued Bounamoussa et ses incidences sur l&⋕39;envasement du barrage de Chefia %A Chamsseddine, Bouhadeb %8 2019 %G eng %9 Master's Thesis %0 Journal Article %J Journal homepage: http://iieta. org/journals/ijhtJournal homepage: http://iieta. org/Journals/IJHT %D 2019 %T Evaluation of Crude Oil Fouling Formation in a Heat Exchanger with Twisted Tape Inserts %A Cucumo, Mario A %A Mele, Marilena %A Nicoletti, Francesco %A Galloro, Antonio %A Perrone, Diego %A Greco, Nicoletta %A Mutani, Guglielmina %A Todeschi, Valeria %A Sepehrianazar, Farid %A Hassanzadeh, Rahim %B Journal homepage: http://iieta. org/journals/ijhtJournal homepage: http://iieta. org/Journals/IJHT %V 37 %P 927-935 %8 2019 %G eng %0 Journal Article %J The Eurasia Proceedings of Science Technology Engineering and MathematicsThe Eurasia Proceedings of Science Technology Engineering and Mathematics %D 2019 %T Evaluation of cytotoxic Effect, anticholinesterase, antioxidant, antiarthritic and antibacterial activities of the Algerian species Scabiosa stellata L. %A MOUFFOUK Chaima %A MOUFFOUK soumia %A Hambaba Leila %A Haba Hamada %A Mouffouk, Sara %B The Eurasia Proceedings of Science Technology Engineering and MathematicsThe Eurasia Proceedings of Science Technology Engineering and Mathematics %V 8 %P 1-11 %8 2019 %G eng %0 Conference Proceedings %D 2019 %T Evaluation phytochimique et antimicrobienne de la plante cytus purgans %A Badra, BOUZGHAIA %C SKIKDA , Algérie %8 2019 %G eng %0 Conference Proceedings %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins FSTGAT-USTHB 01 au 03-10- %D 2019 %T Evolution tectono-sédimentaire du bassin néogène de Batna-Ain Touta, limite Aurès-Monts de Belezma %A Khanfer, S. %A Fouad, DJAIZ %A Bachir, Lamouri %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins FSTGAT-USTHB 01 au 03-10- %C Alger, Algérie %8 2019 %G eng %0 Journal Article %J Physica E: Low-dimensional Systems and NanostructuresPhysica E: Low-dimensional Systems and Nanostructures %D 2019 %T Exceeding 30% efficiency for an environment-friendly tandem solar cell based on earth-abundant Se/CZTS materials, ISSN / e-ISSN 1386-9477 / 1873-1759 %A Hichem, Ferhati %A DJEFFAL Fayçal %X In this paper, a new Se/CZTSSe tandem solar cell architecture is proposed as a viable approach to reach ultrahigh efficiency values at low fabrication cost. The proposed tandem design consists of a Se-based top cell with Ti intermediate ultra-thin metallic layers (MLs) and a CZTS bottom cell with graded band-gap aspect. The role of the introduced design amendments in achieving the dual-benefit of enhanced optical behavior and reduced recombination losses is investigated by means of an accurate numerical modeling. Moreover, a comprehensive study which involves the impact of design parameters such as the MLs position and the CZTSSe band-gap profile on the device performance is carried out. Moreover, Particle Swarm Optimization (PSO)-based metaheuristic technique is used to boost up the Se/CZTSSe tandem cell efficiency by identifying both the suitable position of the introduced ultrathin MLs and the appropriate CZTSSe band-gap profile. It is found that the adopted optimization approach pinpoints a new path toward achieving over 30% efficiency, not only it provides the possibility to reduce interface recombination effects by optimizing the band offset at the buffer/absorber interfaces but also enables selecting the most favorable design configuration associated with enhanced optical behavior. This makes the optimized Se/CZTSSe tandem solar cell potential alternative for providing high-efficiency and stable tandem solar cell. %B Physica E: Low-dimensional Systems and NanostructuresPhysica E: Low-dimensional Systems and Nanostructures %V Volume 109 %P pp 52-58 %8 2019 %G eng %0 Conference Proceedings %B 2019 16th International Multi-Conference on Systems, Signals & Devices (SSD) %D 2019 %T Experimental Analysis for enhancement of unbalanced standalone Wind Energy Conversion System %A Keskes, Salma %A Sallem, Souhir %A Bouchiba, Nouha %A Kammoun, Mohamed Ben Ali %A CHRIFI-ALAOUI, Larbi %A Saïd Drid %B 2019 16th International Multi-Conference on Systems, Signals & Devices (SSD) %I IEEE %P 322-327 %8 2019 %@ 1-72811-820-4 %G eng %0 Journal Article %J Studia Geotechnica et MechanicaStudia Geotechnica et Mechanica %D 2019 %T Experimental bearing capacity of eccentrically loaded foundation near a slope %A Mansouri, Tarek %A Abbeche, Khelifa %B Studia Geotechnica et MechanicaStudia Geotechnica et Mechanica %V 41 %P 33-41 %8 2019 %@ 0137-6365 %G eng %0 Journal Article %J Journal of Thermal Analysis and Calorimetry. An International Forum for Thermal Studies, J Therm Anal Calorim (2019)Journal of Thermal Analysis and Calorimetry. An International Forum for Thermal Studies, J Therm Anal Calorim (2019) %D 2019 %T Experimental investigation and thermal modelling of box and parabolic type solar cookers for temperature mapping %A Fatiha Yettou %A Amor Gama %A Boubekeur Azoui %A Ali Malek %A Narayan Lal Panwar %X This investigation examines mathematical modelling and experimental validation of two types of solar cookers: a box type with tilted intercept area equipped with one external reflector, and a parabolic cooker with a new configuration. Experiments were carried out with the cookers filled with two kilograms of water from 08:00 to 15:00 solar time. During the experiments, temperature gain in the box-type solar cooker was recorded at about 69.8 °C and in the parabolic-type solar cooker at 73.6 °C at the stagnation point. Direct normal irradiation in three distinct study areas was observed and found that it varied from 7.6 to 10 kWh m-$². Cooking pot placed in parabolic cooker was varied between 130 and 132 °C. Centre and south-east regions of study areas where global irradiation varied from 8 to 8.4 kWh m-$² were found suitable for box-type solar cooker and cooking pot temperature were found in the range of 100 °C to 105 °C. Mathematical modelling was programmed in MATLAB. The theoretical results were consistent with experiential data for both types of solar cookers. The effectiveness of the two cooker types can be deduced from the maps. It is found the use of the cookers in Northern and Southern regions of the country was not identical. Their suitability for cooking depends on the amount of solar radiations received. %B Journal of Thermal Analysis and Calorimetry. An International Forum for Thermal Studies, J Therm Anal Calorim (2019)Journal of Thermal Analysis and Calorimetry. An International Forum for Thermal Studies, J Therm Anal Calorim (2019) %V 136 %P 1347-1364 %8 2019 %G eng %0 Journal Article %J Water SupplyWater Supply %D 2019 %T Experimental investigation of a poly-energy multi-effect still in Algeria %A Abdessemed, Amina %A Boubekeur, Ilies %A Boublai, Noureddine %A Bougriou, Cherif %B Water SupplyWater Supply %V 19 %P 926-931 %8 2019 %@ 1606-9749 %G eng %0 Journal Article %J Soil Mechanics and Foundation EngineeringSoil Mechanics and Foundation Engineering %D 2019 %T Experimental investigation of interference between adjacent footings on layered cohesionless soil %A Boufarh, R %A Abbeche, K %A Abdi, A %B Soil Mechanics and Foundation EngineeringSoil Mechanics and Foundation Engineering %V 56 %P 128-135 %8 2019 %@ 1573-9279 %G eng %0 Journal Article %J Distributed Generation & Alternative Energy JournalDistributed Generation & Alternative Energy Journal %D 2019 %T An Experimental Study on the Smart Home Concept with PV and Energy Management and Control Strategy Using an Open Source Platform %A Ghouari, A. %A Chaâbane, H. %A A. Chaghi %A M.Chahdi %X The smart grid system is key to the new electrical network infrastructure. It takes into account the use of the new information and communication technologies (ITC) and the integration of the renewable energy power generation (photovoltaics PV, concentrated solar power CSP, wind, etc). The smart grid promises better management and control of energy sources. The application of the smart grid, especially, in Algeria allows the optimal control of the electricity demand since the latter keeps rising continuously. The use of smart grid allows the rationalization of the electricity consumption in smart homes through appliance automated control. Input energy savings result in the reduction of c emission. Herein, we present a new energy management strategy tested in an experimental smart home (SM). The implemented management approach was made possible by using a new electronic system that allowed the control of all appliances via the internet network. For this purpose, a dynamic monitoring web interface was developed under an open source platform in order to process the whole data delivered by the system. The final output of the system which consists of a balance between all types of energy involved, including CO2 gas emission, is displayed. It is only then that the user can take adequate decision and establish the priorities for rational use of the energy available. %B Distributed Generation & Alternative Energy JournalDistributed Generation & Alternative Energy Journal %V 34 N 1 %P 61-80 %8 2019 %G eng %0 Journal Article %J Renewable energyRenewable energy %D 2019 %T Fast short-term global solar irradiance forecasting with wrapper mutual information %A Hassen Bouzgou %A Christian A Gueymard %B Renewable energyRenewable energy %V 133 %P 1055-1065 %8 2019 %@ 0960-1481 %G eng %0 Journal Article %J Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control EngineeringProceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering %D 2019 %T Fault diagnosis based on the quality effect of learning algorithm for manufacturing systems %A Djelloul, Imene %A Sari, Zaki %A Sidibe, Ibrahima dit Bouran %B Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control EngineeringProceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering %V 233 %P 801-814 %8 2019 %@ 0959-6518 %G eng %0 Journal Article %J Neural Computing and ApplicationsNeural Computing and Applications %D 2019 %T Fault isolation in manufacturing systems based on learning algorithm and fuzzy rule selection %A Djelloul, Imene %A Sari, Zaki %A Souier, Mehdi %B Neural Computing and ApplicationsNeural Computing and Applications %V 31 %P 3211-3225 %8 2019 %@ 1433-3058 %G eng %0 Journal Article %J IET Renewable Power GenerationIET Renewable Power Generation %D 2019 %T Fault-tolerant control of a smart PV-grid hybrid system %A Tiar, M. %A Betka, A. %A Drid, S. %A Abdeddaim, S. %A Sellali, M. %A Medjmadj, S. %B IET Renewable Power GenerationIET Renewable Power Generation %V 13 N° 13 %P 2451-2461 %8 2019/7/12 %G eng %0 Journal Article %J Journal of Occupational and Environmental HygieneJournal of Occupational and Environmental Hygiene %D 2019 %T Filtering performances of 20 protective fabrics against solid aerosols %A Wingert, Loïc %A Cloutier, Yves %A Hallé, Stéphane %A Bahloul, Ali %A Tessier, Dominic %A Giraudel, Jean-Luc %A Dolez, Patricia %A Tuduri, Ludovic %B Journal of Occupational and Environmental HygieneJournal of Occupational and Environmental Hygiene %V 16 %P 592-606 %8 2019 %@ 1545-9624 %G eng %0 Journal Article %J Science and Technology for the built EnvironmentScience and Technology for the Built Environment %D 2019 %T Filtration of nanoparticles applied in general ventilation %A Brochot, Clothilde %A Abdolghader, Pooya %A Haghighat, Fariborz %A Bahloul, Ali %B Science and Technology for the built EnvironmentScience and Technology for the Built Environment %V 25 %P 114-127 %8 2019 %@ 2374-4731 %G eng %0 Thesis %D 2019 %T Filtres optiques à reponse impulsionnelle finie (RIF), filtres à coefficients reels %A khaled, Yahia cherif %A Imane, Merazga %8 2019 %G eng %9 Master's Thesis %0 Journal Article %J Journal of MechanicsJournal of Mechanics %D 2019 %T Finite element analysis of 2-D structures by new strain based triangular element %A Rebiai, C %B Journal of MechanicsJournal of Mechanics %V 35 %P 305-313 %8 2019 %@ 1727-7191 %G eng %0 Journal Article %J Journal of King Saud University - Computer and Information SciencesJournal of King Saud University - Computer and Information Sciences %D 2019 %T A framework for spectrum harvesting in heterogeneous wireless networks integration %A Samir Gourdache %A Azeddine Bilami %A Kamel Barka %X Today’s, and near future, communication networks rely heavily on capacity expansion to keep pace with the massive number of mobile devices and ever-increasing mobile traffic. This expansion can be achieved through three major ingredients, namely, adding more wireless-spectrum, efficient usage of this spectrum, and adequate networks’ architectures. In this paper, a proposition for integrating these three ingredients in a cognitive-radio-inspired framework is presented. The focus is on the integration of the idle spectrum resources of different wireless networks into a single mobile heterogeneous wireless network. This framework is based on a conceptual network-architecture articulated with a generic and cooperative spectrum-harvesting scheme. The former brings the necessary agility for such heterogeneous environments, the latter keeps the network supplied with the vital spectrum resources. In our proposal, we make use of cross-correlated sequences (CCSs) for context-aware events’ signaling purposes. This choice is motivated by the particularly interesting characteristics of CCSs, namely, duration shortness, robustness to bad radio conditions, detection rather than decoding, and low probability of collision. As an illustration, we propose a reporting and detection scheme, in the context of OFDMA systems, and provide performance results from simulations to validate our proposal. %B Journal of King Saud University - Computer and Information SciencesJournal of King Saud University - Computer and Information Sciences %8 2019 %G eng %0 Thesis %D 2019 %T Fréquence de résonance d&⋕39;une antenne microbande de forme triangulaire sur substrat ajustable et bicouche %A Ahlem, Rouibak %A El-Houda, Arab Nour %8 2019 %G eng %9 Master's Thesis %0 Journal Article %J International Journal of Pervasive Computing and CommunicationsInternational Journal of Pervasive Computing and Communications %D 2019 %T A full comparison study of service discovery approaches for internet of things %A Aziez, Meriem %A BENHARZALLAH, Saber %A Bennoui, Hammadi %B International Journal of Pervasive Computing and CommunicationsInternational Journal of Pervasive Computing and Communications %8 2019 %@ 1742-7371 %G eng %0 Conference Proceedings %B 2019 International Conference on Intelligent Systems and Advanced Computing Sciences (ISACS) %D 2019 %T Fuzzy Controllers for a high performance of the Doubly Fed Induction Generator based on Wind Turbine in variable speed %A Belkacem, Yasser %A Said Drid %A Makouf, A %A CHRIFI-ALAOUI, Larbi %A Ouriagli, Mohammed %B 2019 International Conference on Intelligent Systems and Advanced Computing Sciences (ISACS) %I IEEE %P 1-7 %8 2019 %@ 1-72814-813-8 %G eng %0 Journal Article %J ISA transactionsISA Transactions %D 2019 %T Fuzzy –Super twisting control implementation of battery/super capacitor for electric vehicles %A Sellali, M. %A Abdeddaim, S. %A Betka, A. %A Djerdir, A. %A Drid, S. %A Tiar, M. %X The present paper deals with a real-time implementation of a novel Fuzzy logic energy management strategy (EMS), applied to a battery–super capacitor hybrid energy system and associated with a permanent magnet synchronous motor (PMSM) which emulates the traction part of an electric vehicle (EV). On the sources side, the fuzzy logic supervisor acts in a smart way to permute smoothly between the various operations modes via an efficient power frequency splitting. In addition, it permits a quite regulation of both the DC bus and the super-capacitor (SC) voltages regardless of the speed profile variations to ensure an optimal power flow to the load and to keep the SC operation in a safe voltage range while providing or absorbing power in transients. On the traction side, a second order sliding mode control called ‘super-twisting’ (ST), associated with a space vector modulation (SVM) strategy is applied to ensure … %B ISA transactionsISA Transactions %8 2019 %G eng %0 Journal Article %J ISA transactionsISA Transactions %D 2019 %T Fuzzy-Super twisting control implementation of battery/super capacitor for electric vehicles %A Sellali, M %A Abdeddaim, S %A Betka, A %A Djerdir, A %A Drid, S %A Tiar, M %B ISA transactionsISA Transactions %V 95 %P 243-253 %8 2019 %@ 0019-0578 %G eng %0 Conference Proceedings %B International Conference on Electrical Engineering and Control Applications %D 2019 %T GA Based Adaptive Fuzzy Sliding Mode for 3 DOF Spatial Arm Manipulator Trajectory Tracking %A Belloumi, Rabie %A Slimane, Noureddine %B International Conference on Electrical Engineering and Control Applications %I Springer %P 455-464 %8 2019 %G eng %0 Journal Article %J Journal of Young PharmacistsJournal of Young Pharmacists %D 2019 %T Gene Expression Levels of Selected Factors in Monocytic Leukemia Cell Line THP-1 Upon Treatment with n-butanol Extract of Atractylis flava Desf against Cancer %A Akram, Melakhessou Mohamed %A Naima, Benkiki %A Marref, Salah Eddine %A Joubert, Olivier %A Doumandji, Zahra Manel %A Safar, Ramia %B Journal of Young PharmacistsJournal of Young Pharmacists %V 11 %P 36 %8 2019 %@ 0975-1483 %G eng %0 Journal Article %J Applied Artificial IntelligenceApplied Artificial Intelligence %D 2019 %T A Generalized and Parallelized SSIM-Based Multilevel Thresholding Algorithm %A Boubechal, Ikram %A Rachid, Seghir %A Benzid, Redha %X Multilevel thresholding is a widely used technique to perform image segmentation. It consists of dividing an input image into several distinct regions by finding the optimal thresholds according to a certain objective function. In this work, we generalize the use of the SSIM quality measure as an objective function to solve the multilevel thresholding problem using empirically tuned swarm intelligence algorithms. The experimental study we have conducted shows that our approach, producing near-exact solutions, is more effective compared to the state-of-the-art methods. Moreover, we show that the computation complexity has been significantly reduced by adopting a shared-memory parallel programming paradigm for all the algorithms we have implemented. %B Applied Artificial IntelligenceApplied Artificial Intelligence %V 33 %P 1266-1289 %8 2019 %G eng %0 Journal Article %J Journal of Central South UniversityJournal of Central South University %D 2019 %T Genetic algorithm and particle swarm optimization tuned fuzzy PID controller on direct torque control of dual star induction motor %A Ghoulemallah Boukhalfa %A Sebti Belkacem %A Abdesselem Chikhi %A Said Benaggoune %B Journal of Central South UniversityJournal of Central South University %V 26 %P 1886-1896 %8 2019 %@ 2227-5223 %G eng %0 Journal Article %J bioRxivbioRxiv %D 2019 %T Genomic Retargeting of Tumor Suppressors p53 and CTCF Promotes Oncogenesis %A Schwartz, Michal %A Portugez, Avital Sarusi %A Attia, Bracha Zukerman %A Tannenbaum, Miriam %A Loza, Olga %A Chase, Aliza %A Turman, Yousef %A Kaplan, Tommy %A Salah, Zaidoun %A Hakim, Ofir %B bioRxivbioRxiv %P 703124 %8 2019 %G eng %0 Journal Article %J The Euro-arab Organization for Environment and Water and Desert Researches, International Journal of Environment and WaterThe Euro-arab Organization for Environment and Water and Desert Researches, International Journal of Environment and Water %D 2019 %T Geological Characterization and contibution of Geophysics to the mobilization of water resources in the Ain Djasser basin (South-Sétifien, Algeria NE), ISSN 2052-3408 %A Djaiz, Fouad %A Nabil, Defaflia %A Ali, ATHAMENA %A Lamouri, Bachir %A Boughdiri, Mabrouk %A Belalite, Halima %A Abdellah, Boushaba %X Le bassin d’Ain Djasser fait partie de l’ensemble Sud-Sétifien. Ce dernier est représenté par une plaine inter-montagneuse appartenant au bassin des hauts plateaux constantinois. Il est caractérisé par un climat de type méditerranéen. L’hydrologie tributaire du relief est la conséquence directe des eaux de surface et de la fonte des neiges. La synthèse géologique montre un domaine allochtone résultant d’une histoire polyphasée associant les tectoniques atlasique et alpine. Ce dernier est caractérisé par des séries sédimentaires carbonatées colmaté par d’abondantes formations terrigènes. L’alimentation de l’eau souterraine des différentes nappes profondes à semi-profondes provient essentiellement de l’infiltration des eaux de pluies. Ce cortège de roche forme une nappe libre et captive, par endroit recoupée par des forages à des profondeurs de 178 à 330 m, fournissant un débit moyen de 15 l/s. L’interprétation des coupes géoélectriques du bassin montrent, (i) des formations alluvionnaires du mio-plio-quaternaire de quelques dizaines de mètres qui forment un bon aquifère superficiel, (ii) des calcaires fissurés du jurassico-crétacé dont le toit est atteint à des profondeurs variables est un aquifère captif. L’influence d’accidents entre les différents blocs rend possible une éventuelle alimentation des aquifères entres eux. L’analyse litho-stratigraphique montre que le substratum et la couverture sédimentaire ne présentent pas de grandes variations latérales. Par contre, nous observons au niveau des sondages une variation dans l’épaisseur et la lithologie des couches, essentiellement au niveau de la formation du remplissage mio-plio-quaternaire. L’objectif de cette étude réside pour l’essentiel, dans la mobilisation des ressources en eaux superficielles et souterraine pour leurs exploitations dans les domaines agricoles et l’élevage, en vue d’une utilisation rationnelle et planifiée de cet élément vital qu’est l’eau %B The Euro-arab Organization for Environment and Water and Desert Researches, International Journal of Environment and WaterThe Euro-arab Organization for Environment and Water and Desert Researches, International Journal of Environment and Water %V Vol. 8 %P pp. 66-77 %8 2019 %G eng %0 Journal Article %J IEEE Sensors JournalIEEE Sensors Journal %D 2019 %T Giant detectivity of ZnO-based self-powered UV photodetector by inserting an engineered back gold layer using RF sputtering %A Ferhati, Hichem %A Fayçal DJEFFAL %A Benhaya, Abd-Elhamid %A Bendjerad, Adel %B IEEE Sensors JournalIEEE Sensors Journal %V 20 %P 3512-3519 %8 2019 %@ 1530-437X %G eng %0 Journal Article %J Journal homepage: http://iieta. org/journals/mmc_bJournal homepage: http://iieta. org/journals/mmc_b %D 2019 %T Heat Transfer Enhancement Using Vortex Generators in Inclined Tubes %A Merimeche, Imene %A Ghazali Mebarki %A Samir RAHAL %A Narayan, Ashutosh %A Chakraborty, Anindita %A Dewangan, Akanksha %A Al-Obeidi, Ahmed S %A AL-Azzawi, Saad Fawzi %A Nayak, Manoj Kumar %A Zeeshan, Ahmad %B Journal homepage: http://iieta. org/journals/mmc_bJournal homepage: http://iieta. org/journals/mmc_b %V 88 %P 1-7 %8 2019 %G eng %0 Conference Proceedings %D 2019 %T Hematotoxicite induite par le nickel chez la rate gestante de souche wistar %A ISMAHANE, BOULILA %C Université Mostefa BEN BOULAID- Batna 2, Algérie %8 2019 %G eng %0 Journal Article %J IEEE Sensors JournalIEEE Sensors Journal %D 2019 %T High-responsivity MSM solar-blind UV photodetector based on annealed ITO/Ag/ITO structure using RF sputtering %A Ferhati, Hichem %A Fayçal DJEFFAL %B IEEE Sensors JournalIEEE Sensors Journal %V 19 %P 7942-7949 %8 2019 %@ 1530-437X %G eng %0 Journal Article %D 2019 %T HOMOGENEISATION ET CORRECTEURS DE QUELQUES PROBLEMES AUX LIMITES DEGENERES %A Chennouf, Selwa %8 2019 %G eng %0 Journal Article %J J Chem Pharm ResJ Chem Pharm Res %D 2019 %T HPLC profile and in vitro antioxidant properties of the n-butanol extract of Linaria tingitana Boiss. and Reut %A HANFER, Mourad %A Cheriet, Thamere %A Menad, Ahmed %A Seghiri, Ramdane %A Ameddah, Souad %B J Chem Pharm ResJ Chem Pharm Res %V 11 %P 50-58 %8 2019 %G eng %0 Conference Proceedings %B 23 ème Colloque des Bassins Sédimentaires. 21 – 23 novembre %D 2019 %T Hydrochemical Characteristics under current condition exploitation usingstatistics methods : case of the Zana- Roknia plain, North east of Algeria %A Ali, ATHAMENA %A Redha, MENNANI Mohamed %A Fouad, DJAIZ %X

: This paper is a contribution to evaluate the physicochemical characteristics of the groundwater of Merdja Zana-Chott Saboun. The study of geology with the geophysics highlights the existence of two formations aquifers. The first surface formation, formed by levels of sand, gravel, limestone and clay intercalations, dating to the age of the Mio-PlioQuaternary. The second formation is carbonated and formed primarily by limestones of the lower Cretaceous and superior Jurassic. The covering of surface reaches, in certain places, 150m of thickness in particular near the Chott and a low thickness in the vicinity of the mountains. T: This Thist t t he multivariate statistical techniques, were used to identify the hydrochemical processes and their relation with groundwater quality and to get an insight into the hydrochemical Chott Saboun aquifer groundwater chemistry evaluation. Twenty five samples are analyzed. The Piper diagram showed that water facies are magnesium bicarbonate on the sides of the western reliefs and magnesium chloride-sulphated at the north and the center of the plain. The PCA carried out on three factors revealed that on the factorial design F1-F3, nitrates negatively determine factor 3, indicating the presence of an agriculture pollution. On the factorial design F1-F2, HCO3 - negatively determine the factor 2, indicating the carbonated origin. However, the CA, based on variables, showed that the waters in the region can be classified into three groups according to flow direction while, the CA, based on major ion contents, defined three groups, reflecting the same hydrochemical facies. The first group characterized by Mg2+ and Cl- , HCO3 - . Samples of this group are mostly located in the north and northeastern part of the region. The second group characterized by Mg2+ and SO4 --, Clis located near the Northwestern and western outcrops. The third group coincides with the central part, the lowest of the plain, characterized by Mg2+ and SO4 --. The hydrochemical study made it possible to allot the evaporitic origin to the elements Na+, Mg2+ , K + , Cl- , SO4 - , while for element HCO3 - it results from the carbonated formations. These results showed that the presence of nitrates in the studied area is closely linked to the agricultural activity.

%B 23 ème Colloque des Bassins Sédimentaires. 21 – 23 novembre %C Fès, Maroc %8 2019 %G eng %U https://23cibs2019.sciencesconf.org/data/pages/Recueil_des_resumes_23cibs_2020.pdf %0 Journal Article %J Geomech. EngGeomech. Eng %D 2019 %T Hydromechanical behavior of a natural swelling soil of Boumagueur region (east of Algeria) %A Mehdi Mebarki %A Kareche, Toufik %A Derfouf, Feth-Ellah Mounir %A Taibi, Said %A Aboubekr, Nabil %B Geomech. EngGeomech. Eng %V 17 %P 69-79 %8 2019 %G eng %0 Conference Proceedings %B 1er Colloque sur la Géologie des Bassins Sédimentaires Magrébins « GBSM ». Octobre 01,02,03 , %D 2019 %T Identification des aquifères par les méthodes géophysiques. Cas du système aquifère de hammam bradaa nord-est de guelma. Algérie %A Nafaa, Brinis %A Abdelhamid Khedidj %A Khadri Rahma %X

L’aquifère de Hammam Bradaa se situe au Nord-Est de Guelma, Algérie. Cet aquifère représente une ressource stratégique pour la région, ses eaux sont utilisées pour l’AEP des agglomérations limitrophes ; Héliopolis, Guelaat Bousbaa, Nechmaya, El Fedjoudj ainsi que la daïra de Bouchegouf dans la wilaya de Guelma et une partie de la wilaya de Annaba. Du point de vue géologique, les formations rencontrées sont en majeurs partie carbonatées d’âge Crétacé. Le rôle de la prospection électrique est l’identification de la géométrie des formations aquifères ainsi que la variation de leurs résistivités. Ces dernières dépendent de la nature pétrographique, la structure des roches et le degré de la minéralisation des eaux souterraines.

L’objectif principal de cette étude est l’exploitation de la campagne de prospection électrique (ENAGEO, 1993-1994) pour l’étude de la géométrie du système aquifère de Hammam Bradaa et l’identification, par l’occasion, du rôle de la tectonique dans la disposition actuelle des formations composant ce système. Les résultats obtenus sont concluants et indiquent que la région d’étude présente un bassin subsident limitée par des failles d’une orientation Sud-Ouest, Nord-Est, formant un ensemble complexe de Horsts et de Grabens. Cette zone représente un grand réservoir d’eau souterraine constitué par des formations géologiques essentiellement carbonatés plus ou moins fissurées avec présence locale de Karst représentées par des horizons résistant qui favorisent fortement la susceptibilité de potentialités hydriques importantes.

%B 1er Colloque sur la Géologie des Bassins Sédimentaires Magrébins « GBSM ». Octobre 01,02,03 , %C Alger, Algérie %8 2019 %G eng %U https://www.researchgate.net/publication/358279876_Identification_des_aquiferes_par_les_methodes_geophysiques_Cas_du_systeme_aquifere_de_Hammam_Bradaa_Nord_Est_de_Guelma_Algerie %0 Conference Proceedings %B Séminaire International sur l′Hydrogéologie et l′Environnement SIHE %D 2019 %T Identification des paramètres responsables de la minéralisation des sources d'eau utilisées pour l'irrigation dans le synclinal de BOUZINA, Nord est algérien %A Nafaa, Brinis %A Adel, Mekaoussi %X

La région de Bouzina se situe au cœur des Aurès, elle appartient aux territoires de la wilaya de Batna, elle s’étend sur une superficie dépassant 293 Km2 . La population développe une agriculture de montagne qui totalise plus de 289 hectares destinés pour l’essentiel aux arboricultures (141 900 arbres) et les cultures maraichères. Les sources d’eau, malgré un débit total de 88l/s, représentent un potentiel important qui participent à l’opération d’irrigation. Nombreuses sont taries après la sécheresse qu’a connu la région. Le synclinal de Bouzina compte dix sources pérennes utilisées par la population locale. Le présent travail s’intéresse à la qualité chimique des eaux de ces sources, l’origine de la minéralisation et leur aptitude à l’irrigation. Le dépouillement des résultats d’analyse chimique indique les groupes suivants :  Les eaux bicarbonatées calciques et magnésiennes représentent 50% des eaux analysées,  Les eaux sulfatées calciques représentent 50% des eaux analysées. Par ailleurs, le rapport entre bicarbonates et sulfates est dans sa majorité proche de « 1 » indiquant des eaux mixtes (mélange entre les deux types d’eau). L’origine de la minéralisation est à la fois le résultat de la dissolution des roches carbonatées et gypsifères, alors que les eaux sont d’excellentes à bonnes qualités pour l’irrigation. Mots clés : Aurès, Bouzina, sources, irrigation, gypsifère, carbonaté.

%B Séminaire International sur l′Hydrogéologie et l′Environnement SIHE %C Ouargla , Algeria %8 2019 %G eng %U https://dspace.univ-ouargla.dz/jspui/bitstream/123456789/24488/1/Mekaoussi_Adel.pdf %0 Conference Proceedings %B Anales de Filología Francesa %D 2019 %T Identité queer: absence et négation de soi dans Folle de Nelly Arcan %A Bouhadid, Nadia %B Anales de Filología Francesa %V 27 %P 35-52 %8 2019 %@ 1989-4678 %G eng %0 Journal Article %J Electrotehnica, Electronica, AutomaticaElectrotehnica, Electronica, Automatica %D 2019 %T Image Segmentation Algorithm based on Level Set Method with Stochastic Constraint applied to Computed Tomography Images. %A Larbi, Messaouda %A Messali, Zoubeida %A Hafaifa, Ahmed %A Kouzou, Abdellah %A FORTAKI, Tarek %B Electrotehnica, Electronica, AutomaticaElectrotehnica, Electronica, Automatica %V 67 %8 2019 %@ 1582-5175 %G eng %0 Journal Article %J Electrotehnica, Electronica, AutomaticaElectrotehnica, Electronica, Automatica %D 2019 %T An Image Segmentation Algorithm based on LSM with Stochastic Constraint applied to Computed Tomography Images. %A Larbi, Messaouda %A Messali, Zoubeida %A Hafaifa, Ahmed %A Kouzou, Abdellah %A FORTAKI, Tarek %B Electrotehnica, Electronica, AutomaticaElectrotehnica, Electronica, Automatica %V 67 %8 2019 %@ 1582-5175 %G eng %0 Conference Proceedings %B Second International Symposium Water Resources and Environmental Impact Assessment in North Africa (WREIANA 2019) March 25 -27, %D 2019 %T Impact de la pollution agricole sur la qualité des eaux de l'aquifère de Teleghma %A Mouna, Dekakra %A Redha, MENANI Mohamed %A Khedidja, Abdelhamid %B Second International Symposium Water Resources and Environmental Impact Assessment in North Africa (WREIANA 2019) March 25 -27, %C Sousse, Tunisia %8 2019 %G eng %0 Journal Article %J OptikOptik %D 2019 %T Impact of deposition methods and doping on structural, optical and electrical properties of ZnO-Al thin films, ISSN 0030-4026 %A A. Zaiour %A Abdelhamid, Benhaya %A Toufik, Bentrcia %X In this work, thin films of aluminum doped ZnO (AZO) were deposited on ultrasonically cleaned glass substrates by sol-gel process using dip and spin coating techniques. For this purpose, Zinc acetate dihydrate, aluminum nitrate nonahydrate, ethanol and mono ethanolamine were employed as precursor, dopant, solvent and stabilizer, respectively. X-ray diffraction, UV–vis, photoluminescence, 4-point probe and Van der pauw techniques were investigated for the characterization of the prepared AZO thin films. X-ray-analysis revealed that all the prepared films have hexagonal wurtzite structure with a relative preferential orientation along the c-axis and the lattice parameters are close to the standard values reported in literature. UV–vis spectroscopy showed that the average value of the films’ transmittance in the visible region is found to be around 85% and the gap ranges in the interval [3.15 eV–3.30 eV]. The photoluminescence spectrum only showed the UV peak while the broad band of the visible region was completely vanished. The electrical measurements indicate that sol-gel methods provide relatively high resistivities compared to those obtained with physical vapor deposition (PVD) techniques. %B OptikOptik %V Volume 186 %P pp 293-299 %8 2019 %G eng %0 Thesis %D 2019 %T Implantation d’une GMAO dans un système de production pour l’amélioration de la performance de l’entreprise %A Haroun, Belhoul %X

Dans les branches de l’industrie et du service, où la différentiation se fait au niveau du produit et où les marges sont singulièrement réduites, la stratégie de réduction des coûts est fondamentale. L’assistance par une informatique intégrée y joue un rôle de plus en plus important. Avec l’aide de l’informatique et du système d’information, non seulement chaque fonction de l’entreprise est améliorée au niveau de son efficience et de son efficacité propres, mais aussi des effets de synergie entre toutes ces fonctions peuvent être cherchés. Les logiciels de GMAO permettent d’optimiser la gestion technique et administrative de l’ensemble des opérations de maintenance d’une entreprise. Ces logiciels automatisent les opérations principales de gestion des stocks de pièces de rechange, optimisent les approvisionnements, éditent les bons de sortie, permettent d’établir un budget prévisionnel en fonction de la fréquence des interventions, etc. Le principe de ce projet est l’implantation d’une GMAO dans un système de production afin d’accroitre la productivité du service maintenance et garantir la fiabilité et la disponibilité des équipements de production de l’entreprise ce qui implique des gains cumulés de temps et d’argents assez important. Pour aboutir à la réussite du projet, l’implantation d’une GMAO nécessite au préalable une analyse fouillée des besoins, une définition précise des objectifs, une préparation soigneuse des acteurs et l’adhésion de tous. Une telle démarche doit se faire sous l’impulsion de la direction avec la participation du personnel de l’entreprise. La difficulté pour l'entreprise qui souhaite s'équiper d'une GMAO est d'en faire un choix qui couvrira exactement ses besoins. Ce choix sera suivi d'un projet d'implantation de la GMAO qui devra prendre en compte divers aspects afin que cette implantation se déroule correctement. Afin d’assurer le succès de la mise en place de la GMAO. Une démarche d’implantation doit être rigoureusement suivie pour faciliter l’intégration de ce nouvel outil informatique à l’organisation interne de l’entreprise.

%8 2019 %G eng %0 Journal Article %J OptikOptik %D 2019 %T Improving the efficiency of a-Si: H/c-Si thin heterojunction solar cells by using both antireflection coating engineering and diffraction grating %A Bencherif, H %A Dehimi, L %A Pezzimenti, F %A Della Corte, FG %B OptikOptik %V 182 %P 682-693 %8 2019 %@ 0030-4026 %G eng %0 Journal Article %J Biodiversitas Journal of Biological DiversityBiodiversitas Journal of Biological Diversity %D 2019 %T In vivo evaluation of anticryptosporidiosis activity of the methanolic extract of the plant Umbilicus rupestris %A Benhouda, Afaf %A BENHOUDA, DJAHIDA %A Yahia, Massinissa %B Biodiversitas Journal of Biological DiversityBiodiversitas Journal of Biological Diversity %V 20 %8 2019 %@ 2085-4722 %G eng %0 Journal Article %J Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering)Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering) %D 2019 %T Incipient Inter-Turn Short Circuit Fault Estimation Based on a Faulty Model Observer and ANN-Method for Induction Motor Drives %A M.Bouakoura %A NAIT-SAID, MS %A Nait-Said, N. %X A new equivalent model of the induction motor with turn to turn fault on one phase has been developed. This model has been used to establish two schemes to estimate the severity of the short circuit fault. In the first scheme, the faulty model is considered as an observer, where a correction of an error between the measured and the estimated currents is the kernel of the fault severity estimator. However, to develop the second method, the model was required only in the training process of an artificial neural network (ANN). Since stator faults have a signature on symmetrical components of phase currents, the magnitudes and angles of these components were used with the mean speed value as inputs of the ANN %B Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering)Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering) %V 12 N° 4 %P 374-383 %8 2019 %G eng %0 Journal Article %J Scientia IranicaScientia Iranica %D 2019 %T Influence of masonry panels with openings on the seismic response of reinforced concrete infilled frames %A Noui, Saleh %A Kadid, Abdelkrim %A Bali, Abderrahim %B Scientia IranicaScientia Iranica %V 26 %P 157-166 %8 2019 %@ 1026-3098 %G eng %0 Journal Article %J Physica E: Low-dimensional Systems and NanostructuresPhysica E: Low-dimensional Systems and Nanostructures %D 2019 %T Influence of TCO intermediate thin-layers on the electrical and thermal properties of metal/TCO/p-Si Schottky structure fabricated via RF magnetron sputtering, ISSN / e-ISSN 1386-9477 / 1873-1759 %A Hichem, Ferhati %A DJEFFAL Fayçal %A Kacha, Kalinka %A Adel, Bendjerad %A A. Benhaya %X In this paper, versatile Metal/TCO/p-Si Schottky Barrier Diodes (SBDs) with dissimilar TCO intermediate layers (ZnO and ITO) were fabricated by RF magnetron sputtering technique. An overall electrical performance comparison between the Al/ZnO/p-Si, Au/ITO/p-Si and the conventional Au/p-Si structures is carried out. The measured I-V characteristics indicate that the proposed Al/ZnO/p-Si design exhibits an outstanding capability for achieving a high rectifying ratio of 142 dB. This is mainly due to the enhanced Schottky barrier height (SBH) of 0.75 V and close to unite ideality factor (n = 1.23). Such behavior can be attributed to the enhanced interface quality achieved by introducing TCO inter-layers, which could decrease the Series resistance. A comparative study of the elaborated structures performance is carried out in which new Figures of Merit (FoM) parameters that combine both electrical and thermal stability performances are proposed. The Experimental results show that the proposed designs with ITO and ZnO sub-layers exhibits improved FoM parameters as compared to the conventional Au/p-Si structure. Moreover, this comparative study enables to the designer to acquire a comprehensive review about the Si-based SBDs design tradeoffs. It is demonstrated that the insertion of a TCO inter-layer might be beneficial for avoiding the degradation related-heating effects. Therefore, the proposed designs offer the possibility of bridging the gap between superior electrical performance and high thermal stability, which makes them suitable for developing high-performance Schottky solar cells and sensing applications. %B Physica E: Low-dimensional Systems and NanostructuresPhysica E: Low-dimensional Systems and Nanostructures %V Volume 106 %P pp 25-30 %8 2019 %G eng %0 Book Section %B Active Learning-Beyond the Future %D 2019 %T Innovative Approach for Renewing Instructional Design Applied in the Context of e-Learning %A Sofiane Aouag %A Djalal, Hedjazi %B Active Learning-Beyond the Future %I IntechOpen %8 2019 %@ 1-83962-244-X %G eng %0 Conference Proceedings %B International Conference on Advances in Mechanical Engineering and Mechanics %D 2019 %T Inspection on a Three-Dimensional Measuring Machine for a Virtual Model for Additive Manufacturing %A Ameddah, Hacene %A Selloum, Rabia %A Mourad Brioua %B International Conference on Advances in Mechanical Engineering and Mechanics %I Springer %P 138-143 %8 2019 %G eng %0 Journal Article %J Journal homepage: http://iieta. org/journals/i2mJournal homepage: http://iieta. org/journals/i2m %D 2019 %T Instrumentation Mesure Métrologie %A Touahria, Abdeldjouad %A Bougriou, Cherif %B Journal homepage: http://iieta. org/journals/i2mJournal homepage: http://iieta. org/journals/i2m %V 18 %P 369-380 %8 2019 %G eng %0 Journal Article %J Journal of Engineering, Design and TechnologyJournal of Engineering, Design and Technology %D 2019 %T An integrated framework using VSM, AHP and TOPSIS for simplifying the sustainability improvement process in a complex manufacturing process %A Soltani, Mohyiddine %A Aouag, Hichem %A Mouss, Mohamed Djamel %B Journal of Engineering, Design and TechnologyJournal of Engineering, Design and Technology %8 2019 %@ 1726-0531 %G eng %0 Journal Article %J Fuzzy Sets and SystemsFuzzy Sets and Systems %D 2019 %T Interval-valued membership function estimation for fuzzy modeling %A Bouhentala, Moufid %A Ghanai, Mouna %A Chafaa, Kheireddine %B Fuzzy Sets and SystemsFuzzy Sets and Systems %V 361 %P 101-113 %8 2019 %@ 0165-0114 %G eng %0 Journal Article %J International Journal of Mathematical Modelling and Numerical OptimisationInternational Journal of Mathematical Modelling and Numerical Optimisation %D 2019 %T Kernel function based interior point algorithms for linear optimisation %A El Amir Djeffal %A Bachir Bounibane %B International Journal of Mathematical Modelling and Numerical OptimisationInternational Journal of Mathematical Modelling and Numerical Optimisation %V 9 %8 2019 %G eng %0 Journal Article %D 2019 %T L’Approche Par les Compétences en classe de FLE: Caractéristiques, objectifs et application %A Khadraoui, Errime %A Laidoudi, Assia %A Messaour, Riad %8 2019 %G eng %0 Conference Proceedings %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins %D 2019 %T La lithostratigraphie de l’Ammonitico Rosso de Djebel Kasserou (Monts de Batna) %A Touansa, R. %A Fouad, DJAIZ %A Mabrouk, Boughdiri %X

La région de Kasserou est située dans la partie Nord-est des Monts de Batna-Belezma. Le Jurassique dans ces massifs constitue une série complète qui s'étale du Lias au Tithonique. Cette série est représentée à la fois par des formations carbonatées et calcaro-dolomitique dans sa partie sud, et marno-calcaire dans sa partie nord dont le précieux repère de l’Ammotitico rosso.

%B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins %C Alger, Algérie %8 2019 %G eng %U https://www.researchgate.net/publication/342734904_La_Lithostratigraphie_de_L%27Ammonitico_Rosso_du_DjKasserou_Monts_de_Batna %0 Thesis %B Génie Industriel %D 2019 %T La politique de Sureté de Fonctionnement dans les systèmes industriels : Application aux stations d’épuration dites STEP %A Mohamed Said, NOUNE %X

Les systèmes industriels rencontre dans leurs vies de fonctionnement des situations délicates qui provoquent leurs défaillances. La sûreté de fonctionnement se manifeste comme un ensemble de méthodes aui peuvent aider à la mise en place d'une politique de maintenance pour les systèmes industriel. Dégager une politique de maintenance adéquate pour une station d'épuration certifie ISO 14001 en utilisant les loi de probabilité, l'historique des composante de la station d'épuration pour la détermination exactes des paramètres F.M.D

%B Génie Industriel %8 2019 %G eng %9 Doctorat %0 Journal Article %J مجلة العلوم النفسية والتربويةمجلة العلوم النفسية والتربوية %D 2019 %T La validité de l’évaluation sommative: étude des situations d’intégration du FLE au cycle moyen %A Laidoudi, Assia %B مجلة العلوم النفسية والتربويةمجلة العلوم النفسية والتربوية %V 5 %P 320-328 %8 2019 %@ 2588-2473 %G eng %0 Book %D 2019 %T Le Management des Connaissances Pour les Systèmes de Production %A Samia Aitouche %A Mouss, Med Djamel %A MOUSS, Nadia Kinza %I Éditions universitaires européennes %8 2019 %@ 3-8416-7432-1 %G eng %0 Journal Article %J تنمية الموارد البشريةتنمية الموارد البشرية %D 2019 %T Le manuel scolaire outil de construction de la compétence lexicale au cycle primaire: étude comparative des manuels scolaires algériens et tunisiens %A Khadraoui, Errime %A Messaour, Riad %B تنمية الموارد البشريةتنمية الموارد البشرية %V 14 %P 229-243 %8 2019 %@ 2600-6359 %G eng %0 Thesis %D 2019 %T Le Turonien de Dj Boukezzez (ChaabetOuledChelih) : Caractérisation lithobiostratigraphique et interprétation paléoenvironnementale. %A Billal, Aichaoui %A Belgacem, Abid %8 2019 %G eng %9 Master's Thesis %0 Conference Proceedings %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins %D 2019 %T Les carbonates marins campano-maastrichtiens dans les gorges d'El Kantara, Aurès occidental, Algérie : control sur la biodiversité, les types de microfaciès et l'architecture des dépôts %A Sana, Benmansour %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins %8 2019 %G eng %0 Conference Proceedings %B 16ème Congrès Maghrébin et National du 24 au 26 Octobre %D 2019 %T Les complications chroniques chez les patients drépanocytaires %A Kala, K. %A Soltani, F. %A Saidi, M. %B 16ème Congrès Maghrébin et National du 24 au 26 Octobre %C Alger, Algérie %8 2019 %G eng %0 Conference Proceedings %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins %D 2019 %T Les dépots Miocène de la région de Tébessa (Nord-est Algérien) : Analyses sédimentologiques, Micropaléontologiques et Paléoenvironnement %A Nabil, Defaflia %A Benkhedda, A. %A Fouad, DJAIZ %A Cerif, A. %A Djerab-Ruault, M. %A Gouadia, L. %B Premier Colloque sur la géologie des Bassins Sédimentaires Maghrébins %8 2019 %G eng %0 Book %D 2019 %T Les Systemes Et Circuits Programmables: Convertisseurs, Pld, Fpga Et Applications: Les systèmes programmables %A Benbouza, Mohammed Salah %I Éditions universitaires européennes %8 2019 %@ 613-9-52613-2 %G eng %0 Conference Proceedings %B Le 1er Séminaire National en Géosciences et Environnement SGSE %D 2019 %T Les terrasses fluviatiles quaternaires de Oued El Gourzi et oued El Hay (Batna, NE Algérie) : Sédimentologie Caractéristiques de l’Environnement %A Fouad, DJAIZ %A Bachir, Lamouri %A Mabrouk, Boughdiri %A Rachid, Touansa %A Abdellah, Boushaba %A Manel, Mrred %A Soumia, Khaner %A Imen, Chairat %X

Les sites d’études d’Oued El Hay et Oued El Gourzi sont situés à la limite des Monts de Batna-Belezma et les Aurès au nord-est de l’Algérie. Ils font partie du grand bassin hydrographique de chott-Melghir, ils sont limité au Nord par le bassin versant des Hautes Plateaux Constantinois, à l’Est par le bassin versant d’Oued L’Abiod et à l’Ouest par le bassin versant d’Chott- El Hodna. A notre connaissance, aucune analyse sédimentologique n'a été réalisée sur les terraces fluviatiles de ces cours d'eau. Les caractères hydrodynamiques de l'agent de transport et leur environnement de dépôt sont encore mal connus. Ce travail tente une première analyse pétro-physique du contenu du sédiment et de la granulométrie des niveaux identifiés.

%B Le 1er Séminaire National en Géosciences et Environnement SGSE %8 2019 %G eng %U https://www.researchgate.net/publication/337604159_LES_TERRASSES_FLUVIATILES_QUATERNAIRES_DE_OUED_EL_GOURZI_ET_OUED_EL_HAY_BATNA_NE_ALGERIE_SEDIMENTOLOGIE_ET_CARACTERISTIQUES_DE_L'ENVIRONNEMENT_SEDIMENTAIRE_Materiels_et_Methodes %0 Conference Proceedings %B Congrès maghrébin d'Hématologie %D 2019 %T Leucémie Myéloide Chronique et survenue d'un second cancer à l'ère des ITK : à propos de 3 cas et revue de la littérature %A Soltani, F. %A Aiche, M. %A Kacha, F. %A Saidi, M. %B Congrès maghrébin d'Hématologie %C Alger, Algérie %8 2019 %G eng %0 Journal Article %J Journal of biological engineeringJournal of biological engineering %D 2019 %T The LINC complex, mechanotransduction, and mesenchymal stem cell function and fate %A Bouzid, Tasneem %A Kim, Eunju %A Riehl, Brandon D %A Esfahani, Amir Monemian %A Rosenbohm, Jordan %A Yang, Ruiguo %A Duan, Bin %A Lim, Jung Yul %B Journal of biological engineeringJournal of biological engineering %V 13 %P 1-12 %8 2019 %@ 1754-1611 %G eng %0 Conference Proceedings %B International Earth Science Colloquium On the Aegean Region 2019 %D 2019 %T Lithostratigraphical and sedimentological characterization of the Aptian formation on the Northern flank of Dj Bou Arif (NE of Algeria) %A Sana, Benmansour %B International Earth Science Colloquium On the Aegean Region 2019 %8 2019 %G eng %0 Conference Proceedings %B Congrès maghrébin d'Hématologie %D 2019 %T LMC et survenue d'un second cancer à l'ère des ITK : à propos de 3 cas %A Soltani, F. %A Kacha, F. %A Aiche, M. %A Saidi, M. %B Congrès maghrébin d'Hématologie %C Alger, Algérie %8 2019 %G eng %0 Conference Proceedings %D 2019 %T Lymphome T anaplasique à grandes cellules ALK+ et ALK– : étude descriptive et résultats thérapeutiques d’une série de 11 patients %A Bekache, A. %A Aiche, M. %A Saidi, M. %C Alger, Algérie %8 2019 %G eng %0 Conference Proceedings %D 2019 %T Lymphomes T cutanés primitifs : à propos de 4 cas. %A Bouabdallah, N. %A Kacha, F. %A Saidi, M. %C Alger, Algérie %8 2019 %G eng %0 Journal Article %J International Journal of Advanced Computer Science and ApplicationsInternational Journal of Advanced Computer Science and Applications %D 2019 %T Machine learning approaches for predicting the severity level of software bug reports in closed source projects %A Baarah, Aladdin %A Aloqaily, Ahmad %A Salah, Zaher %A Zamzeer, Mannam %A Sallam, Mohammad %B International Journal of Advanced Computer Science and ApplicationsInternational Journal of Advanced Computer Science and Applications %V 10 %8 2019 %G eng %0 Book %D 2019 %T Maîtrise des conformités en sécurité au travail %A Mohamed Mouda %A Djebabra, MEBAREK %I Éditions universitaires européennes %8 2019 %@ 613-8-46477-X %G eng %0 Journal Article %J Turkish Journal of Veterinary and Animal SciencesTurkish Journal of Veterinary and Animal Sciences %D 2019 %T Methods of diagnosis and treatment of postpartum uterine infection adopted by Algerian veterinarians %A RAHAB, Hamza %A Ricci, Alessandro %A KASSEH-LAOUAR, AHMED %A Christian Hanzen %B Turkish Journal of Veterinary and Animal SciencesTurkish Journal of Veterinary and Animal Sciences %V 43 %P 218-228 %8 2019 %@ 1300-0128 %G eng %0 Journal Article %J Mining ScienceMining Science %D 2019 %T Microstructure and geotechnical characteristics of a highly plastic clay treated by magnesium chloride %A Bahloul, Ouassila %A Abbeche, Khelifa %A Bahloul, Azzedine %B Mining ScienceMining Science %V 26 %8 2019 %@ 2300-9586 %G eng %0 Journal Article %J Egyptian Journal of PetroleumEgyptian Journal of Petroleum %D 2019 %T Mild steel corrosion inhibition by Parsley (Petroselium Sativum) extract in acidic media %A Benarioua, Mokhtar %A Mihi, Abdelkader %A Bouzeghaia, Nora %A Naoun, Mahieddine %B Egyptian Journal of PetroleumEgyptian Journal of Petroleum %V 28 %P 155-159 %8 2019 %@ 1110-0621 %G eng %0 Journal Article %J International Journal of CancerInternational Journal of Cancer %D 2019 %T MiR‐16‐1‐3p and miR‐16‐2‐3p possess strong tumor suppressive and antimetastatic properties in osteosarcoma %A Maximov, Vadim V %A Akkawi, Rania %A Khawaled, Saleh %A Salah, Zaidoun %A Jaber, Lina %A Barhoum, Ahlam %A Or, Omer %A Galasso, Marco %A Kurek, Kyle C %A Yavin, Eylon %B International Journal of CancerInternational Journal of Cancer %V 145 %P 3052-3063 %8 2019 %@ 0020-7136 %G eng %0 Thesis %D 2019 %T Mise en Evidence de l&⋕39;évènement anoxique océanique 2 (EAO-2) dans la région de Batna (NE, Algérie) %A Rafika, Slami %X RésuméRésumé:La présente étude s’intéresse aux dépôts cénomano-turoniens, observables dans la région de Batna,afin de définir la mise en évidence de l’évènement anoxique océanique 2 (EAO-2). Cette région couvre deux domaines paléogéographiques et structuraux : le préatlasique(Monts de Bellezma-Batna) au NOet l’atlasique (Monts de l’Aurès) au SE. Pour le faire,une analyse sédimentologique, biostratigraphique et géochimique est réalisée sur deux coupes Thénièt El Manchar et Firmet Riche «Dj Bou Arif». Basées sur les ammonites et les foraminifères planctoniques, deux formations ont été définies: (1) la Formation des Marnes de Smail, subdivisée en quatre unités litho-stratigraphiques (IA, IB, IC, ID), datée du Cénomanien et (2) la base de la Formation des Dolomies de l’Oued Skhoun (unité, IIA) datée du Turonien inférieur. L’analyse qualitative et quantitative des foraminifères (planctoniques et/ou benthiques), des ostracodes, l’étude du microfaciès et des marqueurs géochimiques, permet de reconstituer l’évolution du paléo-environnement et les variations paléo-bathymétriques au cours de l’intervalle stratigraphique concerné. Ainsi, les unités IA-IB-IC et la partie inférieure de l’unité ID (Cénomanien) sont dominées par des associations de fora-minifères benthiques agglutinés et des carapaces entières d’ostracodes, témoignant d’un milieu de plate-forme et d’un faible hydrodynamisme. Les calcaires supérieurs de l’unité IC et inférieurs de l’unité ID sont marqués par la présence de rudistes traduisant une reductiondu milieu de sédimentation et une augmentation de l’hydrodynamisme. Dans ces dépôts, les associations montrent une diversité spécifique faible à moyenne et une abondance plus ou moins élevée de foraminifères benthiques, témoignant de conditions trophiques et d’oxygénation considérées comme normales. Les termes sommitaux de l’unité ID (sommet du Cénomanien)et l’unité IIA (base du Turonien) marquent, quant à eux, une évolution vers des conditions plus profondes, comme le montre la succession standard des événements déjà reconnus en Afrique du nord, à savoir : l’abondance de foraminifères planctoniques, la présence de ‘filaments’ et une réduction drastique de la faune d’ostracodes. D’une manière générale, la sédimentation des deux formations dans les deux domaines représente une séquence qui évolue d’un environnement de plate-forme externe distale à celui d’une plate-forme moyenne, avec une phase régressive. Cette séquence s’achève avec le retour aux conditions profondes concomitantes d’une hausse eustatique et dépôt de sédiments pélagiques caractérisant un intervalle transgressif (IT) et s’inscrit dans le cycle eustatique majeur téthysien de troisième ordre. L’évolution séquentielle et paléogéographique des dépôts cénomaniens et turoniens inférieurs de la région de Batna dépendent intimement du contexte structural de la région.En outre, les courbes isotopiques du, carbone (Δ13C) et de l’oxygène (Δ18O) des carbonates mettent en évidence des anomalies isotopiques relatives aux modifications paléo-environnementales. Les données du Δ13C et celles du COT indiquent une productivité primaire faible. Les données duΔ18O, quant à elles, indiquent une augmentation des paléo-températures, cause principale du déclenchement de l’EAO 2. Ces interprétations paléo-environnementales s’accordent avec les données connues du contexte paléogéographique régional et mettent en exergue les spécificités téthysiennes. %8 2019 %G eng %9 Master's Thesis %0 Journal Article %J Computers in Human BehaviorComputers in Human Behavior %D 2019 %T Mobile crowd sensing – Taxonomy, applications, challenges, and solutions %A Djallel Eddine Boubiche %A Imran, Muhammad %A Maqsood, Aneela %A Shoaib, Muhammad %X Recently, mobile crowd sensing (MCS) is captivating growing attention because of their suitability for enormous range of new types of context-aware applications and services. This is attributed to the fact that modern smartphones are equipped with unprecedented sensing, computing, and communication capabilities that allow them to perform more complex tasks besides their inherent calling features. Despite a number of merits, MCS confronts new challenges due to network dynamics, the huge volume of data, sensing task coordination, and the user privacy problems. In this paper, a comprehensive review of MCS is presented. First, we highlight the distinguishing features and potential advantages of MCS compared to conventional sensor networks. Then, a taxonomy of MCS is devised based on sensing scale, level of user involvement and responsiveness, sampling rate, and underlying network infrastructure. Afterward, we categorize and classify prominent applications of MCS in environmental, infrastructure, social, and behavioral domains. The core architecture of MCS is also described. Finally, we describe the potential advantages, determine and reiterate the open research challenges of MCS and illustrate possible solutions. %B Computers in Human BehaviorComputers in Human Behavior %V 101 %P 352-370 %8 2019 %G eng %0 Journal Article %J Computers in Human BehaviorComputers in Human Behavior %D 2019 %T Mobile crowd sensing–taxonomy, applications, challenges, and solutions %A Djallel Eddine Boubiche %A Imran, Muhammad %A Maqsood, Aneela %A Shoaib, Muhammad %B Computers in Human BehaviorComputers in Human Behavior %V 101 %P 352-370 %8 2019 %@ 0747-5632 %G eng %0 Journal Article %J Theoretical and Applied Fracture MechanicsTheoretical and Applied Fracture Mechanics %D 2019 %T Mode I stress intensity factor and T-stress by exponential matrix method %A Nianga, J-M %A Mejni, F %A Kanit, T %A Imad, A %A Li, J %B Theoretical and Applied Fracture MechanicsTheoretical and Applied Fracture Mechanics %V 103 %P 102287 %8 2019 %@ 0167-8442 %G eng %0 Conference Proceedings %B 2019 International Conference on Control, Automation and Diagnosis (ICCAD) %D 2019 %T Modeling and simulation of the DFIG using in the wind energy conversion system for an isolated site %A Slimane, W %A Benchouia, MT %A Golea, A %A Ait-Mohamed-Said, I %A Drid, S %A Chrifi-Alaoui, L %B 2019 International Conference on Control, Automation and Diagnosis (ICCAD) %I IEEE %P 1-5 %8 2019 %@ 1-72812-292-9 %G eng %0 Thesis %B Génie Industriel %D 2019 %T Modélisation et Optimisation des systèmes renouvelables hybrides pour les sites autonomes %A Heda, Zereg %X

Les systèmes d'énergie solaire et éolienne sont omniprésents, librement disponibles, respectueux de l'environnement et sont considérés comme des sources d'énergie prometteuses en raison de leur disponibilité et de leurs avantages topologiques pour les générations d’énergies locales. Les systèmes hybrides d'énergie solaire-éolienne, utilisant deux sources d'énergie renouvelables, permettent d'améliorer l'efficacité du système, la fiabilité de l'alimentation et la réduction des besoins en stockage d'énergie pour les applications autonomes. Les systèmes hybrides solaires-éoliens deviennent populaires dans les applications de production d'électricité dans les régions éloignées en raison des progrès réalisés dans les technologies d'énergie renouvelable et de la hausse substantielle des prix des produits pétroliers. Dans cette thèse, nous nous proposons d'étudier une variété d'outils méthodologiques pour la simulation, l'optimisation et le contrôle des systèmes d'énergies solaire-éolienne hybrides autonomes avec stockage de batterie. On constate que les efforts continus de recherche et de développement dans ce domaine sont encore nécessaires pour améliorer la performance de ces systèmes, établir des techniques pour prédire avec précision leur production et les intégrer de manière fiable à d'autres sources de production d'énergie renouvelable ou conventionnelle.

%B Génie Industriel %8 2019 %G eng %9 Doctorat LMD %0 Conference Proceedings %B 2019 1st International Conference on Sustainable Renewable Energy Systems and Applications (ICSRESA) %D 2019 %T Modelling graphene/n-Si Schottky junction solar cells by artificial neural networks %A Rahmani, Mourad %A Meziani, Zahra %A Zohir Dibi %B 2019 1st International Conference on Sustainable Renewable Energy Systems and Applications (ICSRESA) %I IEEE %P 1-6 %8 2019 %@ 1-72815-356-5 %G eng %0 Conference Proceedings %B 2019 19th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA) %D 2019 %T Modified robust model reference adaptive system scheme for a speed sensorless vector control of induction motor %A Bahloul, Mohamed %A Vargas, Alessandro N %A CHRIFI-ALAOUI, Larbi %A Said Drid %A Chaabane, Mohamed %B 2019 19th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA) %I IEEE %P 473-478 %8 2019 %@ 1-72811-292-3 %G eng %0 Conference Proceedings %B 2019 8th International Conference on Systems and Control (ICSC) %D 2019 %T MPPT technique for standalone hybrid PV-wind using fuzzy controller with power management %A Boutabba, T %A Drid, S %A Chrifi-Alaoui, L %A Ouriagli, M %A Bussy, P %B 2019 8th International Conference on Systems and Control (ICSC) %I IEEE %P 377-381 %8 2019 %@ 1-72811-938-3 %G eng %0 Journal Article %J Foundations of CrystallographyFoundations of Crystallography %D 2019 %T MS14-P33| CRYSTAL STRUCTURE AND BIOLOGICAL ACTIVITIES OF A NEW PROTON TRANSFER MATERIAL %A Hamdi, Najlaa %A Chaouch, Souad %A Idboumlik, Meryem %A Lachkar, Mohammed %A Bali, Brahim El %B Foundations of CrystallographyFoundations of Crystallography %V 75 %P e240 %8 2019 %G eng %0 Journal Article %J Foundations of CrystallographyFoundations of Crystallography %D 2019 %T MS18-P06| SYNTHESIS AND CRYSTAL CHARACTERIZATION OF A NEW LAYERED ACIDIC DIPHOSPHATE METALLATE %A Hamdi, Najlaa %A Oursal, Rachid %A Chaouch, Souad %B Foundations of CrystallographyFoundations of Crystallography %V 75 %P e318 %8 2019 %G eng %0 Journal Article %J Journal of Network and Computer ApplicationsJournal of Network and Computer Applications %D 2019 %T MsM: A microservice middleware for smart WSN-based IoT application %A Benayache, Ayoub %A Azeddine Bilami %A Barkat, Sami %A Lorenz, Pascal %A Taleb, Hafnaoui %X Actually, wireless sensor networks represent a substantial part in IoT. However, their limitation requires a special consideration in IoT applications. For their integration with the internet, it is necessary to adapt such networks using different middleware, with taking into account various challenges such as heterogeneity and interoperability. Previously Service Oriented Architecture (SOA) was the suitable design, but with a better practice, a new design called microservice becomes the leader due to its high performance and its suitability for IoT applications. In this paper, we first survey the most important middleware that have been proposed to handle WSN through IoT. Also, we discuss the most crucial microservices that handle different integration factors by making them supported by the proposed middleware. Our proposal is inspired from artificial neural network architecture to allow dynamic service interaction; it supports unlimited services with a regard to various device capabilities separately of the cloud technologies. Moreover, the evaluation of our design clearly shows that our middleware allows a lightweight WSN integration with IoT regarding to their limitations and requirements. %B Journal of Network and Computer ApplicationsJournal of Network and Computer Applications %V 144 %P 138-154 %8 2019 %G eng %0 Journal Article %J https://www.sciencedirect.com/science/article/pii/S004579061832620X⋕!https://www.sciencedirect.com/science/article/pii/S004579061832620X⋕! %D 2019 %T A multi-agent system for distributed maintenance scheduling %A Djalal HEDJAZI %A Fateh Layachi %A Djallel Eddine Boubiche %X Due to the intrinsically geo-distributed subcontracting maintenance activity practice, the maintenance scheduling has for a long time been a major challenge in the industry. This research work presents a methodology to schedule the maintenance activities of geo-distributed assets. A multi-agent system based approach is proposed to enable the decision-making for the subcontractors in a distributed industrial environment under uncertainty. An auction based negotiation mechanism is designed to promote competition and cooperation among the different agents, and to obtain global good schedule.Compared to the Weighted Shortest Processing Time first–Heuristic–Earliest Due Date (WSPT-H-EDD) method, the experimental results show that the proposed approach is able to provide scheduling scheme with good performances in terms of Global Cost, Total Weighted Tardiness Cost and makespan. %B https://www.sciencedirect.com/science/article/pii/S004579061832620X⋕!https://www.sciencedirect.com/science/article/pii/S004579061832620X⋕! %V 77 %P 1-11 %8 2019 %G eng %0 Conference Proceedings %B 2019 International Conference on Theoretical and Applicative Aspects of Computer Science (ICTAACS) %D 2019 %T Multi-level approach for controlling architecture quality with Alloy %A Salim Kadri %A Sofiane Aouag %A Djalal HEDJAZI %B 2019 International Conference on Theoretical and Applicative Aspects of Computer Science (ICTAACS) %I IEEE %V 1 %P 1-8 %8 2019 %@ 1-72816-633-0 %G eng %0 Conference Proceedings %B 2019 International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET) %D 2019 %T Multi-Level Direct Torque Control of Induction Motor Using Fuzzy-Genetic Speed Regulation %A Fouzia Benmessaoud %A Abdesselem Chikhi %A Sebti Belkacem %A Ghoulemallah Boukhalfa %B 2019 International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET) %I IEEE %P 1-5 %8 2019 %@ 1-72812-301-1 %G eng %0 Journal Article %J Indian Journal of Science and TechnologyIndian Journal of Science and Technology %D 2019 %T Multimodal face and iris recognition with adaptive score normalization using several comparative methods %A Mansoura, Lemmouchi %A Noureddine, Athamena %A Ouarda Assas %A Yassine, Abdessemed %B Indian Journal of Science and TechnologyIndian Journal of Science and Technology %V 12 %P 7 %8 2019 %G eng %0 Journal Article %J The European Physical Journal PlusThe European Physical Journal Plus %D 2019 %T Multimodel ensemble approach for hourly global solar irradiation forecasting %A Nahed zemouri %A Hassen Bouzgou %A Christian A Gueymard %B The European Physical Journal PlusThe European Physical Journal Plus %V 134 %P 594 %8 2019 %@ 2190-5444 %G eng %0 Journal Article %J International Journal of Computer Electrical EngineeringInternational Journal of Computer Electrical Engineering %D 2019 %T Multiple Classifiers and Invariant Features Extraction for Digit Recognition %A Khedidja, Derdour %A Hayet, Mouss %B International Journal of Computer Electrical EngineeringInternational Journal of Computer Electrical Engineering %V 11 %P 41-52 %8 2019 %G eng %0 Conference Proceedings %B Congrès des sociétés françaises de Pédiatrie Congrès et de l'APLF, %D 2019 %T Néphrose lipoïdique de l’enfant : Etude d’une cohorte de 40 cas %A Fadhila, Bendaoud %B Congrès des sociétés françaises de Pédiatrie Congrès et de l'APLF, %C Paris, France %8 2019 %G eng %0 Journal Article %J International Journal of Computer Applications in TechnologyInternational Journal of Computer Applications in Technology %D 2019 %T A neural network analytical model for predicting determinants of mobile learning acceptance %A Aloqaily, Ahmad %A Al-Nawayseh, Mohammad K %A Baarah, Aladdin Hussein %A Salah, Zaher %A Al-Hassan, Malak %A Al-Ghuwairi, Abdel-Rahman %B International Journal of Computer Applications in TechnologyInternational Journal of Computer Applications in Technology %V 60 %P 73-85 %8 2019 %@ 0952-8091 %G eng %0 Journal Article %J Sensing and ImagingSensing and Imaging %D 2019 %T Neural Network Technique for Electronic Nose Based on High Sensitivity Sensors Array, ISSN / e-ISSN 1557-2064 / 1557-2072 %A Khaldi, S. %A Dibi Zohir %X Electronic Nose, as an artificial olfaction system, has potential applications in environmental monitoring because of its proven ability to recognize and discriminate between a variety of different gases and odors. In this paper, we used a chemical sensor array to develop an electronic nose to detect and identify seven different gases (H2, C2H2, CH4, CH3OCH3, CO, NO2, and NH3). These gas sensors are chosen because of its hierarchical/doped nanostructure characteristics, which give them a very high sensitivity and low response time; we improve the linearity response and temperature dependence using models based on artificial neural networks. We used in Electronic nose a pattern recognition based on artificial neural network, which discriminates qualitatively and quantitatively seven gases and has a fast response. %B Sensing and ImagingSensing and Imaging %8 2019 %G eng %0 Journal Article %J Toxicology and Environmental Health SciencesToxicology and Environmental Health Sciences %D 2019 %T Neuronal apoptosis and imbalance of neurotransmitters induced by acetamiprid in rats %A Gasmi, Salim %A Chafaa, Smail %A Lakroun, Zhora %A Rouabhi, Rachid %A Touahria, Chouaib %A Kebieche, Mohamed %A Soulimani, Rachid %B Toxicology and Environmental Health SciencesToxicology and Environmental Health Sciences %V 11 %P 305-311 %8 2019 %@ 2233-7784 %G eng %0 Journal Article %J Journal Algérien de MédecineJournal Algérien de Médecine %D 2019 %T Neutropenie Chimio–induite : Profil Bactériologique. %A Laouer, A. Kassah %A Messala, Amina %A Saidi, Mahdia %B Journal Algérien de MédecineJournal Algérien de Médecine %P 16-24 %8 2019 %G eng %0 Journal Article %J Asian Journal of Civil EngineeringAsian Journal of Civil Engineering %D 2019 %T A new approach for base isolation design in building codes %A Ounis, Hadj Mohamed %A Ounis, Abdelhafid %A Djedoui, Nassim %B Asian Journal of Civil EngineeringAsian Journal of Civil Engineering %V 20 %P 901-909 %8 2019 %@ 2522-011X %G eng %0 Conference Proceedings %B 3rd International conference on Mechanics and Materials (ICMM19) %D 2019 %T A New Approache on the trajectory planning of the robot for terminal spray %A Bettine, Farid %A Merabti Halim %A Laidoudi Farouk %A Medjili Fayçal %A Ammar, Haboussi %A Hakim Fatmi %B 3rd International conference on Mechanics and Materials (ICMM19) %C Setif, Algeria %8 2019 %G eng %U https://www.researchgate.net/publication/337324486_A_new_approach_on_the_Trajectory_Planning_of_the_robot_for_thermal_spray %0 Journal Article %J Journal of Nano- and Electronic PhysicsJournal of Nano- and Electronic Physics %D 2019 %T New Deconvolution Technique to Improve the Depth Resolution in Secondary Ion Mass Spectrometry, ISSN / e-ISSN 2077-6772 / 2306-4277 %A Nadia, Dahraoui %A Mhamed, Boulakroune %A Djamel, Benatia %X This paper presents an efficient method for recovery of SIMS signals from strongly noised blurred discrete data. This technique is based on Tikhonov-Miller regularization where a priori model of solution is included. The latter is a denoisy signal obtained using the Kalman filter. This is an interesting estimation method, but it can only be used when the system is described precisely. By comparing the results of the proposed technique with those of the literature, our algorithm gives the best results without artifacts and oscillations related to noise and significant improvement of the depth resolution. While, the gain in FWHM is less improved than those obtained by the wavelet technique. Therefore, this new algorithm can push the limits of SIMS measurements towards its ultimate resolution. %B Journal of Nano- and Electronic PhysicsJournal of Nano- and Electronic Physics %V Volume 11 %P pp 02021-1-02021-5 %8 2019 %G eng %0 Conference Proceedings %B 2019 19th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA) %D 2019 %T New MRAS Approach for Sensorless control of IM %A Yassine, Beddiaf %A Fatiha, Zidani %A CHRIFI-ALAOUI, Larbi %B 2019 19th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA) %I IEEE %P 36-40 %8 2019 %@ 1-72811-292-3 %G eng %0 Conference Proceedings %B 2019 8th International Conference on Renewable Energy Research and Applications (ICRERA) %D 2019 %T New nanotechnology structures CNTFET GaAs %A Benbouza, MS %A Hocine, D %A Zid, Y %A Benbouza, A %B 2019 8th International Conference on Renewable Energy Research and Applications (ICRERA) %I IEEE %P 799-803 %8 2019 %@ 1-72813-587-7 %G eng %0 Journal Article %J International Journal of Modelling, Identification and ControlInternational Journal of Modelling, Identification and Control %D 2019 %T A new robust adaptive fuzzy synergetic control for nonlinear systems with an application to an inverted pendulum %A Saidi, Abderazak %A Naceri, Farid %A Vaidyanathan, Sundarapandian %B International Journal of Modelling, Identification and ControlInternational Journal of Modelling, Identification and Control %V 33 %P 89-97 %8 2019 %@ 1746-6172 %G eng %0 Journal Article %J Journal homepage: http://iieta. org/journals/i2mJournal homepage: http://iieta. org/journals/i2m %D 2019 %T Nondestructive Eddy Current Measurement of Coating Thickness of Aeronautical Construction Materials %A Abdou, Abdelhak %A Bouchala, Tarik %A Abdelhadi, Bachir %A Guettafi, Amor %A Benoudjit, Azzedine %B Journal homepage: http://iieta. org/journals/i2mJournal homepage: http://iieta. org/journals/i2m %V 18 %P 451-457 %8 2019 %G eng %0 Journal Article %J International Journal of Performability EngineeringInternational Journal of Performability Engineering %D 2019 %T Non-Intrusive Polynomial Chaos for a Realistic Estimation of Accident Frequency %A Chebila, Mourad %B International Journal of Performability EngineeringInternational Journal of Performability Engineering %V 15 %P 2852 %8 2019 %@ 0973-1318 %G eng %0 Journal Article %J Journal of Computational ElectronicsJournal of Computational Electronics %D 2019 %T A nonlocal approach for semianalytical modeling of a heterojunction vertical surrounding-gate tunnel FET %A Abdelmalek, Nidhal %A Fayçal DJEFFAL %A Bentrcia, Toufik %B Journal of Computational ElectronicsJournal of Computational Electronics %V 18 %P 104-119 %8 2019 %@ 1572-8137 %G eng %0 Journal Article %J International Journal of Robotics, Theory and ApplicationsInternational Journal of Robotics, Theory and Applications %D 2019 %T Non-Singular Terminal Sliding Mode Control of a Nonholonomic Wheeled Mobile Robots Using Fuzzy Based Tyre Force Estimator %A Abdessemed, Foudil %B International Journal of Robotics, Theory and ApplicationsInternational Journal of Robotics, Theory and Applications %V 5 %P 47-62 %8 2019 %@ 2008-7144 %G eng %0 Journal Article %J EnergyEnergy %D 2019 %T Novel control implementation for electric vehicles based on fuzzy-back stepping approach %A Sellali, M. %A Betka, A. %A Drid, S. %A Djerdir, A. %A Allaoui, L. %A Tiar, M. %X The present paper deals with a real-time assessment of a fuzzy –backstepping based control applied to a battery-supercapacitor (SC) hybrid energy storage system (HESS). To properly emulate the behavior of an electric vehicle, the proposed topology is extended to a PMSM drive, that represents the traction part. The proposed control scheme is divided into two parts: The first part plans a fuzzy logic power management approach, to operate the system in a smart way: First, It ensures an optimal load power-sharing, focusing the operation of the involved sources in a safe mode. Second, a quite regulation of both the dc bus and the SC voltage without additional controllers. The second part proposes a back-stepping direct torque control (BS-DTC), associated to a space vector modulation (SVM) strategy, to ensure decoupled torque and flux control of the PMSM machine. The experimental results, conducted on a small … %B EnergyEnergy %V 178 %P 644-655 %8 2019 %G eng %0 Journal Article %J Sensors (Basel)Sensors (Basel) %D 2019 %T A Novel Method for Polar Form of Any Degree of Multivariate Polynomials with Applications in IoT %A Sedat Akleylek %A Soysaldı, Meryem %A Djallel Eddine Boubiche %A Homero Toral-Cruz %X Identification schemes based on multivariate polynomials have been receiving attraction in different areas due to the quantum secure property. Identification is one of the most important elements for the IoT to achieve communication between objects, gather and share information with each other. Thus, identification schemes which are post-quantum secure are significant for Internet-of-Things (IoT) devices. Various polar forms of multivariate quadratic and cubic polynomial systems have been proposed for these identification schemes. There is a need to define polar form for multivariate dth degree polynomials, where d >= 4 . In this paper, we propose a solution to this need by defining constructions for multivariate polynomials of degree d >= 4 . We give a generic framework to construct the identification scheme for IoT and RFID applications. In addition, we compare identification schemes and curve-based cryptoGPS which is currently used in RFID applications. %B Sensors (Basel)Sensors (Basel) %V 19 %P 903 %8 2019 %G eng %0 Journal Article %J Instrumentation, Mesures, MétrologiesInstrumentation, Mesures, Métrologies %D 2019 %T Numerical Investigation of a New Ventilation-radiator. %A Touahria, Abdeldjouad %A Bougriou, Cherif %B Instrumentation, Mesures, MétrologiesInstrumentation, Mesures, Métrologies %V 18 %8 2019 %@ 1631-4670 %G eng %0 Journal Article %J Indian Geotechnical JournalIndian Geotechnical Journal %D 2019 %T A Numerical Investigation of Dynamic Behavior of a Unit Cell of a Loose sand Reinforced by Stone Column Under the Effect of Gravity Using Finn Model %A Noui, Abdelkader %A Karech, Toufik %A Tayeb Bouzid %B Indian Geotechnical JournalIndian Geotechnical Journal %V 49 %P 255-264 %8 2019 %@ 2277-3347 %G eng %0 Journal Article %J Numerical Functional Analysis and OptimizationNumerical Functional Analysis and Optimization %D 2019 %T On Numerical Radius Inequalities for Operator Matrices %A Guelfen, Hanane %A Kittaneh, Fuad %B Numerical Functional Analysis and OptimizationNumerical Functional Analysis and Optimization %V 40 %P 1231-1241 %8 2019 %G eng %0 Conference Proceedings %B The international conference on innovative materials, manufacturing, and advanced technologies (IMMAT’2019),17-19 Octobre, %D 2019 %T Numerical simulation of chip formation in case of orthogonal machining process %A Abderraouf, Benali %A BENMOHAMMED Brahim %B The international conference on innovative materials, manufacturing, and advanced technologies (IMMAT’2019),17-19 Octobre, %C Monastir Tunisie %8 2019 %G eng %0 Conference Proceedings %B 2018 International Conference on Communications and Electrical Engineering (ICCEE) %D 2019 %T Numerical Study of Low Gain Avalanche Detector Performance %A BENDIB Toufik %A Brahim, Lakehal %A KOUDA Souhil %A Abdi Mohamed.Amir %A Dendouga Abedelghani %A Chebaki, Elasaad %A Aouf, Anouar Essadat %A Meddour Fayçal %A Barra Samir %X

In this paper, we present a new ultra fast detector called Low Gain Avalanche Detector (LGAD) with low internal gain. The LGAD is fabricated with conventional APD technology with a modified doping profile, in the multiplication region, which affects the device performance such as: breakdown, multiplication gain and noise factor. For this reason, a numerical method based on Newton-Raphson calculation is proposed to estimate the electrostatic potential and electric field models of low gain avalanche detectors (LGADs) in order to investigate their performances. These models have been validated by their agreement with TCAD numerical simulation results. The effect of Boron doping profile, with different doses in the multiplication region, on the LGAD electrical performance is studied for various device structures in order to extend the device capability to its limit. In addition, LGAD devices are simulated for different temperature considering the effect of the temperature on the multiplication gain.

%B 2018 International Conference on Communications and Electrical Engineering (ICCEE) %C El Oued, Algeria %8 2019 %G eng %0 Journal Article %J UPB Sci Bull, Series DUPB Sci Bull, Series D %D 2019 %T Numerical study of the biomimetic M6-C Prosthesis with viscoelastic core %A AMADJI, Moussa %A Ameddah, Hacene %A Mazouz, Hammoudi %B UPB Sci Bull, Series DUPB Sci Bull, Series D %V 81 %P 121-134 %8 2019 %G eng %0 Journal Article %J Journal of Porous MediaJournal of Porous Media %D 2019 %T Numerical Study on Natural Convection in a Porous Cavity That is Partially Heated and Cooled by Sinusoidal Temperature at Vertical Walls %A Hassinet, Liamena %A Si-Ameur, Mohamed %B Journal of Porous MediaJournal of Porous Media %V 22 %8 2019 %@ 1091-028X %G eng %0 Journal Article %J The Journal of Infection in Developing CountriesThe Journal of Infection in Developing Countries %D 2019 %T Occurrence of VIM-4 metallo-β-lactamase-producing Pseudomonas aeruginosa in an Algerian hospital %A Merradi, Manel %A Kassah-Laouar, Ahmed %A Ammar Ayachi %A Nouzha Heleili %A Taha Menasria %A Hocquet, Didier %A Cholley, Pascal %A Sauget, Marlène %B The Journal of Infection in Developing CountriesThe Journal of Infection in Developing Countries %V 13 %P 284-290 %8 2019 %@ 1972-2680 %G eng %0 Journal Article %J Linear and Multilinear AlgebraLinear and Multilinear Algebra %D 2019 %T Operator equations and inner inverses of elementary operators %A Farida Lombarkia %A Amina Boussaid %X Let E,F,G,D be infinite complex Banach spaces and B(F,E) the Banach space of all bounded linear operators from F into E. Consider A1,A2∈B(F,E), B1,B2∈B(D,G)B1,B2∈B(D,G). Let MA1,B1:X→A1XB1 be the multiplication operator on B(G,F) induced by A1,B1. In particular, LA1=MA1,I and RB1=MI,B1, where I is the identity operator are the left and the right multiplication operators, respectively. The elementary operator Ψ defined on B(G,F)B(G,F) is the sum of two multiplication operators Ψ=MA1,B1+MA2,B2. This paper gives necessary and sufficient conditions for the existence of a common solution of the operator equations MA1,B1(X)=C1 and MA2,B2(X)=C2 and derive a new representation of the general common solution via the inner inverse of the elementary operator Ψ; we apply this result to determine new necessary and sufficient conditions for the existence of a Hermitian solution and a representation of the general Hermitian solution to the operator equation MA,B(X)=C. As a consequence, we obtain well-known results of Dajic´ and Koliha. %B Linear and Multilinear AlgebraLinear and Multilinear Algebra %8 2019 %G eng %0 Journal Article %J Rev. Roum. Sci. Techn.– Électrotechn. et ÉnergRev. Roum. Sci. Techn.– Électrotechn. et Énerg %D 2019 %T OPTIMAL DESIGN OF INDUCTION MAGNETOHYDRODYNAMIC PUMP BY SIMULATED ANNEALING METHOD %A Bouali, Khadidja %A KADID, Fatima Zohra %A BERGOUG, Nassima %A Abdessemed, Rachid %X The magnetohydrodynamics (MHD) is an important interdisciplinary field. It is the interaction between an electromagnetic field and an electrically conducting fluid. Electromagnetic pumps are widely used for the transportation of the fluids in a variety of technological processes. The advantage of these devices is that permits the pumping of liquids without moving parts. The design of the pump is considered as an optimization problem where the objective function is the minimum of the MHD pump mass with both geometrical and electromagnetic contraints type. The obtained optimization results using the finite volume method with Matlab software show the performances of the used stochastic simulated annealing method. %B Rev. Roum. Sci. Techn.– Électrotechn. et ÉnergRev. Roum. Sci. Techn.– Électrotechn. et Énerg %V 64 %P 317–321 %8 2019 %G eng %0 Thesis %D 2019 %T Optimisation de la rugosité de surface de l&⋕39;acier doux en utilisant la méthode de surface de réponse (Tagushi) %A Fateh, MOUMEN %A Ayache, HEMAL %8 2019 %G eng %9 Master's Thesis %0 Journal Article %J Journal of Industrial Engineering InternationalJournal of Industrial Engineering International %D 2019 %T Optimization of single outsourcer–single subcontractor outsourcing relationship under reliability and maintenance constraints %A Haoues, Mohammed %A Dahane, Mohammed %A MOUSS, Nadia Kinza %B Journal of Industrial Engineering InternationalJournal of Industrial Engineering International %V 15 %P 395-409 %8 2019 %@ 2251-712X %G eng %0 Conference Proceedings %B 2018 International Conference on Communications and Electrical Engineering (ICCEE) %D 2019 %T Optimization of ZnTe:O solar cell using genetic algorithms %A Brahim, Lakehal %A Lakhdar, Nacereddine %A Chebbara, Fouad %A Mohammed Boulesbaa %A Abdelghani Dendouga %A Toufik BENDIB %X

In this paper, we study the intermediate band solar cell (IBSC) and present the influence of the physical and geometrical parameters of the solar cell with intermediate band using the model of our approach based on genetic algorithms (GAs). These parameters include absorber width, the acceptor and donor concentration and the absorption coefficient. This analysis based on genetic algorithm is used to improve these parameters and systematically enhance the solar cell performances.

%B 2018 International Conference on Communications and Electrical Engineering (ICCEE) %C El Oued, Algeria %8 2019 %G eng %U https://ieeexplore.ieee.org/abstract/document/8634467 %0 Journal Article %J International Journal of Hydrogen EnergyInternational Journal of Hydrogen Energy %D 2019 %T Optimization study of the produced electric power by SOFCs %A Youcef Sahli %A Hocine Ben Moussa %A Zitouni, Bariza %B International Journal of Hydrogen EnergyInternational Journal of Hydrogen Energy %V 44 %P 22445-22454 %8 2019 %@ 0360-3199 %G eng %0 Journal Article %J Superlattices and MicrostructuresSuperlattices and Microstructures %D 2019 %T Optimized high-performance ITO/Ag/ITO multilayer transparent electrode deposited by RF magnetron sputtering, ISSN 0749-6036 %A Hichem, Ferhati %A DJEFFAL Fayçal %A A. Benhaya %X This paper presents the optimization, elaboration and characterization of a new TCO (Transparent Conductive Oxides) electrode based on ITO/Ag/ITO multilayer design that enables overcoming the trade-off between the electrical and optical properties. A new hybrid approach combining the investigated design and Particle Swarm Optimization (PSO) technique is conducted with the aim of maximizing the Haacke Figures of merit (FoM). It is found that the optimized ITO/Ag/ITO tri-layered design paves a new path toward achieving a high FoM of 125 × 10-3Ω-1. Such improvement is attributed to the improved light management achieved by the efficient modulation of the Ag sub-layer geometry. Subsequently, the optimized multilayer design is fabricated using RF magnetron sputtering technique. The structural, optical and electrical properties associated with the deposited ITO/Ag/ITO multilayer structure are also analyzed. It is found that the fabricated TCO-based electrode shows a high transmittance over than 94.1% and a low sheet resistance of 4.5Ω × sq-1, which is in good agreement with the theoretical predictions. Therefore, the proposed design methodology based on experiments assisted by PSO metaheuristic approach offers exciting opportunities for bridging the gap between transparency and conductivity characteristics. This makes the elaborated ITO/Ag/ITO multilayer design suitable for high-performance optoelectronic applications. %B Superlattices and MicrostructuresSuperlattices and Microstructures %V Volume 129 %P pp 176-184 %8 2019 %G eng %0 Conference Proceedings %B 2019 International Conference on Computer Communication and Informatics (ICCCI) %D 2019 %T Outlier detection algorithm based on mahalanobis distance for wireless sensor networks %A Titouna, Chafiq %A TITOUNA, Faiza %A Ari, Ado Adamou Abba %B 2019 International Conference on Computer Communication and Informatics (ICCCI) %I IEEE %P 1-6 %8 2019 %@ 1-5386-8260-5 %G eng %0 Journal Article %J Journal of Intelligent ManufacturingJournal of Intelligent Manufacturing %D 2019 %T Outsourcing optimization in two-echelon supply chain network under integrated production-maintenance constraints %A Haoues, Mohammed %A Dahane, Mohammed %A Mouss, Nadia Kenza %B Journal of Intelligent ManufacturingJournal of Intelligent Manufacturing %V 30 %P 701-725 %8 2019 %@ 1572-8145 %G eng %0 Journal Article %J Journal of King Saud University - Computer and Information SciencesJournal of King Saud University - Computer and Information Sciences %D 2019 %T A parallel content-based image retrieval system using spark and tachyon frameworks %A Mezzoudj, Saliha %A Behloul, Ali %A Seghir, Rachid %A Saadna, Yassmina %X With the huge increase of large-scale multimedia over Internet, especially images, building Content-Based Image Retrieval (CBIR) systems for large-scale images has become a big challenge. One of the drawbacks associated with CBIR is the very long execution time. In this article, we propose a fast Content-Based Image Retrieval system using Spark (CBIR-S) targeting large-scale images. Our system is composed of two steps. (i) image indexation step, in which we use MapReduce distributed model on Spark in order to speed up the indexation process. We also use a memory-centric distributed storage system, called Tachyon, to enhance the write operation (ii) image retrieving step which we speed up by using a parallel k-Nearest Neighbors (k-NN) search method based on MapReduce model implemented under Apache Spark, in addition to exploiting the cache method of spark framework. We have showed, through a wide set of experiments, the effectiveness of our approach in terms of processing time. %B Journal of King Saud University - Computer and Information SciencesJournal of King Saud University - Computer and Information Sciences %8 2019 %G eng %0 Journal Article %J J Fail. Anal. and PrevenJ Fail. Anal. and Preven %D 2019 %T PCA-I and AHP Methods: Unavoidable Arguments in Accident Scenario Classification %A HADEF, H. %A M. Djebabra, M. Mouda and D. Belala, %X Risk mapping is the foundation of the risk prevention strategy. It allows for the understanding of all factors that may affect the activities. It is a collective decision based on negotiation between the actors. Argument-based negotiation accelerates the negotiation process and converges it toward a final and common decision. It is in this context that this paper aims to illustrate the contribution of the improved PCA and AHP tools, considered as arguments, to the classification of major accident risks. %B J Fail. Anal. and PrevenJ Fail. Anal. and Preven %V 2019 %P 496–503 %8 2019 %G eng %0 Conference Proceedings %B FORUM DE L'ENSEIGNANT منتدى الأستاذ %D 2019 %T Perspective ago-antagonique entre intervention didactique et pédagogique dans les pratiques enseignantes %A Khadraoui, Errime %A Laidoudi, Assia %A Messaour, Riad %B FORUM DE L'ENSEIGNANT منتدى الأستاذ %I ASJP %V 15 %P 133-149 %8 2019 %@ 2437-0576 %G eng %0 Journal Article %J J Pharm Pharmacogn ResJ Pharm Pharmacogn Res %D 2019 %T Phytochemical analysis, and antioxidant, anti-hemolytic and genoprotective effects of Quercus ilex L. and Pinus halepensis Mill. methanolic extracts %A Meziti, Hicham %A Bouriche, Hamama %A Kada, Seoussen %A Demirtas, Ibrahim %A Kizil, Murat %A Senator, Abderrahmane %A Garrido, G %B J Pharm Pharmacogn ResJ Pharm Pharmacogn Res %V 7 %P 260-72 %8 2019 %G eng %0 Journal Article %J Natural Product ResearchNatural Product Research %D 2019 %T Phytochemical compounds and anti-corrosion activity of Veronica rosea %A Ouache, Rachid %A Harkat, Hassina %A Pale, Patrick %A Oulmi, Kafia %X The aim of this work is the phytochemical study of the butanolic extract of the aerial parts of Veronica rosea. Four compounds 1–4 have been isolated using different chromatographic methods. The structures of these compounds were determined by NMR spectral analysis and mass spectroscopy. The adsorption and anticorrosion effects of this extract were investigated towards the corrosion of copper in 1 M HNO3 aqueous by the weight loss technique and potentiodynamic polarization. The results showed that the butanolic extract is a good inhibitor and the inhibition efficiency increases with increasing of concentration of the inhibitor. The adsorption of this extract on the copper specimen surface was spontaneous and obeyed the Langmuir’s adsorption isotherm. Large value of adsorption equilibrium Constant (K ads = 35 L g-1) was obtained. The polarization experiments confirmed the data obtained by gravimetric weight-loss. Tafel plot of polarization curves indicates that the extract acts as a mixed type inhibitor. %B Natural Product ResearchNatural Product Research %V 33 %P 1-5 %8 05 2019 %G eng %0 Conference Proceedings %D 2019 %T Phytochimical analysis from the plant centaurea tenuifolia %A Badra, BOUZGHAIA %C Tozeur, Tunisia %8 2019 %G eng %0 Journal Article %D 2019 %T Polymorphismes génétiques des interleukines dans l’hypersensibilité aux bêta-lactamines chez une partie de la population Algérienne %A Ksouri, Leila %8 2019 %G eng %0 Journal Article %J Asian Pacific journal of allergy and immunologyAsian Pacific journal of allergy and immunology %D 2019 %T Polymorphisms in the interleukin 4 receptor and interleukin 13 genes in immediate allergic reactions to beta-lactam antibiotics: A case-control study %A Ksouri, Leila %A YAHIA MOULOUD %A Dumais, Nancy %B Asian Pacific journal of allergy and immunologyAsian Pacific journal of allergy and immunology %V 37 %P 212-219 %8 2019 %@ 0125-877X %G eng %0 Conference Proceedings %B 2019 1st International Conference on Sustainable Renewable Energy Systems and Applications (ICSRESA) %D 2019 %T Position Control of an Induction Machine Using the Fuzzy Passivity Mode %A Salim, Aissi %A Mounir, Aouadj %B 2019 1st International Conference on Sustainable Renewable Energy Systems and Applications (ICSRESA) %I IEEE %P 1-5 %8 2019 %@ 1-72815-356-5 %G eng %0 Conference Proceedings %B 2019 1st International Conference on Sustainable Renewable Energy Systems and Applications (ICSRESA) %D 2019 %T Possible efficiency boosting of tandem solar cell by using single antireflection coating and BSF layer %A Yousfi, Abderrahim %A Bencherif, Hichem %A Dehimi, Lakhdar %A Pezzimenti, Fortunato %A Saidi, Lamir %A Abdi, Mohamed Amir %A Meddour, Faycal %A Khezzar, Djamel %B 2019 1st International Conference on Sustainable Renewable Energy Systems and Applications (ICSRESA) %I IEEE %P 1-4 %8 2019 %@ 1-72815-356-5 %G eng %0 Journal Article %J Toxicology International (Formerly Indian Journal of Toxicology)Toxicology International (Formerly Indian Journal of Toxicology) %D 2019 %T Potential Protective Effects of Selenium and Zinc against Thyroid Toxicity Induced by Nickel in Preimplanted Wistar Albino Rats %A Imane, Salah %A Ounassa, ADJROUD %A Anfal, Fedala %A Asma, Saouli %B Toxicology International (Formerly Indian Journal of Toxicology)Toxicology International (Formerly Indian Journal of Toxicology) %V 26 %P 54-63 %8 2019 %@ 0976-5131 %G eng %0 Conference Proceedings %B Euro-Mediterranean Conference for Environmental Integration %D 2019 %T Prediction of Earthquake-Induced Liquefaction State in Embankment Dams Using Back-Propagation Neural Network %A Zeroual, Abdelatif %A Djeddou, Messaoud %A Fourar, Ali %B Euro-Mediterranean Conference for Environmental Integration %I Springer %P 2051-2055 %8 2019 %G eng %0 Journal Article %J Arabian Journal of GeosciencesArabian Journal of Geosciences %D 2019 %T Predictive modeling of static and seismic stability of small homogeneous earth dams using artificial neural network %A Zeroual, A %A Fourar, A %A Djeddou, M %B Arabian Journal of GeosciencesArabian Journal of Geosciences %V 12 %P 1-16 %8 2019 %@ 1866-7538 %G eng %0 Journal Article %J ICOFAAS 2019ICOFAAS 2019 %D 2019 %T Preserving Organoleptic Properties of Harvested Date Using Modified Atmosphere %A Dassamiour, Saliha %A CHARLES, Florence %B ICOFAAS 2019ICOFAAS 2019 %P 129 %8 2019 %G eng %0 Journal Article %J Reliability Engineering & System SafetyReliability Engineering & System Safety %D 2019 %T Preventive remanufacturing planning of production equipment under operational and imperfect maintenance constraints: A hybrid genetic algorithm based approach %A Bensmain, Yassir %A Dahane, Mohammed %A Bennekrouf, Mohammed %A Sari, Zaki %B Reliability Engineering & System SafetyReliability Engineering & System Safety %V 185 %P 546-566 %8 2019 %@ 0951-8320 %G eng %0 Journal Article %J Asian-European Journal of MathematicsAsian-European Journal of Mathematics %D 2019 %T A primal-dual interior-point method based on a new kernel function for linear complementarity problem %A El Amir Djeffal %A Mounia Laouar %B Asian-European Journal of MathematicsAsian-European Journal of Mathematics %V 12 %P 2050001 %8 2019 %@ 1793-5571 %G eng %0 Journal Article %J MeasurementMeasurement %D 2019 %T Procedure to measure the penetration of one mechanical filter for nanoparticles–Validation by comparison %A Abdolghader, Pooya %A Brochot, Clothilde %A Haghighat, Fariborz %A Bahloul, Ali %B MeasurementMeasurement %V 147 %P 106840 %8 2019 %@ 0263-2241 %G eng %0 Conference Proceedings %B 4ème conférence internationale d’infectiologie %D 2019 %T Profil des patients atteints d’hépatite virale C traités par les antiviraux directs AAD. %A Abderrezak, Benyahia %B 4ème conférence internationale d’infectiologie %C Oran, Algeria %8 2019 %G eng %0 Conference Proceedings %B 4ème conférence internationale d’infectiologie %D 2019 %T Profil des patients atteints d’hépatite virale C traités par les antiviraux directs AAD %A Soraya, Tebbal %B 4ème conférence internationale d’infectiologie %C Oran, Algeria %8 2019 %G eng %0 Conference Proceedings %D 2019 %T Profil des patients atteints d’hépatite virale C traités par les antiviraux directs AAD %A Hamid, Hadj Aissa %8 2019 %G eng %0 Journal Article %J Current Gene TherapyCurrent Gene Therapy %D 2019 %T The promise of miRNA replacement therapy for Hepatocellular carcinoma %A Elhefnawi, Mahmoud %A Salah, Zeinab %A Soliman, Bangly %B Current Gene TherapyCurrent Gene Therapy %V 19 %P 290-304 %8 2019 %@ 1566-5232 %G eng %0 Journal Article %J Management of Environmental QualityManagement of Environmental Quality %D 2019 %T Proposal for a new method for analyzing the domino effect in an oil refinery and its impact on the environment %A SMAIAH, M. %A DJBABRA, M. %A L. Boubaker %X Purpose The purpose of this paper is to propose a new managerial method to integrate the environmental dimension in the domino effects (DEs) analysis. Design/methodology/approach The proposed method is a three-step approach: identification of primary hazards in the form of potential events causing the DE, a mixed quantification (deterministic and probabilistic) of the risk of the DEs with a view to its control and capitalizing the results from the BLEVESOFT software as well as those relating to the probability of occurrence of the DEs in the form of a prioritized action plan dedicated to surrounding environments (proximity territory). Findings The primary hazards are technologically manageable at the studied system but are unpredictable if triggered at the environmental subsystem because they are difficult to be managed and often cause panic, which is a form of a very catastrophic DE. Research limitations/implications The research could affect members of the engineering and construction industry, and can be applied in several domains since it studies the DE phenomenon. which is a common problem especially in industrials plants. Practical implications The proposal method is applied in an industrial terminal in Algeria. Originality/value This paper presents an exploratory study of using a new managerial method that aims to combine the potentialities of geomatic sciences that allow the spatial representation of nearby territories to assess the severity of DEs through a deterministic approach, and the modeling of DEs as well as their analysis by a probabilistic approach. %B Management of Environmental QualityManagement of Environmental Quality %V 2019 %P 910-924 %8 2019 %G eng %0 Journal Article %J Prod. Eng. Res. DevelProd. Eng. Res. Devel %D 2019 %T Proposal method for the classification of industrial accident scenarios based on the improved principal components analysis (improved PCA) %A HADEF, H. %A DJBABRA, M. %X Using a risk matrix for Risk mapping constitutes the basis of risk management strategy. It aims to classify the identified risks with regards to their management and control. This risk classification, which is based on the frequency and the severity dimensions, is often carried out according to a procedure founded on experts’ judgments. In order to overcome the subjectivity bias of this classification, this paper presents the contribution of the Principal Components Analysis (PCA) method: an exploratory method for graphing risks based on factors that allow a better visualized classification of scenarios accidents. Still, the commonly encountered problem in the data classified by the PCA method resides in the main factors of classification; we judged useful to frame these letters by an algebraic formulation to make an improvement of this classification possible. The obtained results show that the suggested method is a promising alternative to solve the recurring problems of risk matrices, notably in accident scenarios’ classification. %B Prod. Eng. Res. DevelProd. Eng. Res. Devel %V 2019 %P 53–60 %8 2019 %G eng %0 Conference Proceedings %B 2019 15th International Wireless Communications & Mobile Computing Conference (IWCMC) %D 2019 %T Proposal of a new self-organizing protocol for data collection regarding mobile wireless sensor and actor networks %A Kamel Barka %A Lyamine Guezouli %A Samir Gourdache %A Djallel Eddine Boubiche %B 2019 15th International Wireless Communications & Mobile Computing Conference (IWCMC) %I IEEE %P 985-990 %8 2019 %@ 1-5386-7747-4 %G eng %0 Conference Proceedings %B 15th International Wireless Communications & Mobile Computing Conference (IWCMC) %D 2019 %T Proposal of a new self-organizing protocol for data collection regarding Mobile Wireless Sensor and actor Networks %A Kamel Barka %A Lyamine Guezouli %A Samir Gourdache %A Djallel Eddine Boubiche %X Mobile Wireless Sensor and Actor Networks (MWSANs) can simply be defined as an extension of Wireless Sensor and Actor Networks (WSANs) in which the actor nodes are mobile. As such, in addition to challenges existing in WSAN, the mobility also imposes new challenges such as localization of actors, cooperative tracking of both actor-actor and actor-sensor collaboration, and communication infrastructure between distant actors. New communication protocols, specific to MWSANs, are needed. In this paper, we propose a self-organization and data collection protocol in order to provide energy efficiency, low latency, high success rate and suitably interactions between sensors and actors and take benefit from the mobility and resources existing on the network’s actor nodes. The actor nodes move according to RWP mobility model. Each actor, during its pause time creates a temporary cluster, and is the head of it, collects and processes sensor data and performs actions on the environment based on the information gathered from sensor nodes in its cluster. Once an actor detects a base station it delivers the collected data to it. The simulations carried out (with TOSSIM tool), comfort us with good performances results. %B 15th International Wireless Communications & Mobile Computing Conference (IWCMC) %C Tangier, Morocco %8 2019 %G eng %U https://ieeexplore.ieee.org/abstract/document/8766657 %0 Conference Proceedings %B International Conference on Management, Economics & Social Science %D 2019 %T Proposal of an Automatic Single Document Text Summarization %A Naima, Zerari %B International Conference on Management, Economics & Social Science %8 2019 %G eng %0 Conference Proceedings %B ICMESS 2019 43rd International Conference, 18-19 Mars %D 2019 %T Proposal of an Automatic Single Document Text Summarization http://researchfora.com/Conference2019/UK/2/ICMESS/ %A Naima, Zerari %B ICMESS 2019 43rd International Conference, 18-19 Mars %C London, Royaume unis %8 2019 %G eng %0 Thesis %B Génie industriel %D 2019 %T Proposition d’un système distribué de diagnostic et pronostic basé sur les services web et ELM %A Berghout Tarek %B Génie industriel %8 2019 %G eng %U http://eprints.univ-batna2.dz/1915/ %9 Doctorat %0 Journal Article %J International Journal of Computational Science and EngineeringInternational Journal of Computational Science and Engineering %D 2019 %T Pseudo Zernike moments-based approach for text detection and localisation from lecture videos %A Soundes, Belkacem %A GUEZOULI Larbi %A Samir, Zidat %X Scene text presents challenging characteristics mainly related to acquisition circumstances and environmental changes resulting in low quality videos. In this paper, we present a scene text detection algorithm based on pseudo Zernike moments (PZMs) and stroke features from low resolution lecture videos. Algorithm mainly consists of three steps: slide detection, text detection and segmentation and non-text filtering. In lecture videos, slide region is a key object carrying almost all important information; hence slide region has to be extracted and segmented from other scene objects considered as background for later processing. Slide region detection and segmentation is done by applying pseudo Zernike moment’s based on RGB frames. Text detection and extraction is performed using PZMs segmentation over V channel of HSV colour space, and then stroke feature is used to filter out non-text region and to remove false positives. The algorithm is robust to illumination, low resolution and uneven luminance from compressed videos. Effectiveness of PZM description leads to very few false positives comparing to other approached. Moreover resulting images can be used directly by OCR engines and no more processing is needed. %B International Journal of Computational Science and EngineeringInternational Journal of Computational Science and Engineering %V 19 %P 274-283 %8 2019 %G eng %0 Journal Article %J International Journal of River Basin ManagementInternational Journal of River Basin Management %D 2019 %T Quality assessment of shallow groundwater for irrigation purposes in Tadjenanet – Chelghoum Laid area (Eastern Algeria) ISSN / e-ISSN 1571-5124 / 1814-2060 %A Khedidja, Abdelhamid %A Abderrahmane, Boudoukha %X The groundwater quality of Tadjenanet- Chelghoum Laid Semi-arid region was assessed for irrigation suitability; where the intensity of salinization process depends on soil characteristics, water quality, irrigation practices and in particular the inefficiency of the drainage system. The drought of the last decade has created an agricultural deficit due to high evapotranspiration, influencing the water salinity. To achieve this assessment, thirty groundwater samples were collected at identical locations from deeper wells. The physicochemical parameters such as, pH, electrical conductivity (EC), total hardness (TH), Ca²+$, Mg²+$, Na+$, K+$, HCO3-$, SO4²-$, Cl-$ and NO3-$ have been studied. Obtained results were measured and interpreted with different irrigation indexes like EC, sodium percentage (SP), sodium adsorption ratio (SAR), residual sodium carbonate (RSC), permeability index (PI) and Kelly’s ratio (KR). These parameters combined allowed to conclude that the quality of groundwater was roughly suitable for irrigation. %B International Journal of River Basin ManagementInternational Journal of River Basin Management %8 2019 %G eng %0 Journal Article %J International Journal of Quality and Service SciencesInternational Journal of Quality and Service Sciences %D 2019 %T The quality of service in urban public transport in Algeria %A Houria, Bencherif %A Farès, Boubakour %B International Journal of Quality and Service SciencesInternational Journal of Quality and Service Sciences %8 2019 %@ 1756-669X %G eng %0 Journal Article %D 2019 %T Real-Time Eddy Current Measurement of Aeronautical Construction Material Coating Thickness %A Abdou, Abdelhak %A Bouchala, Tarik %A Abdelhadi, Bachir %A Guettafi, Amor %A Benoudjit, Azzeddine %8 2019 %G eng %0 Journal Article %D 2019 %T Recherche des résidus de médicaments vétérinaires dans les denrées alimentaires d’origine animale %A BOUTRID, Safinez %8 2019 %G eng %0 Journal Article %J Science of Computer ProgrammingScience of Computer Programming %D 2019 %T Reconfigurable GSPNs: a modeling formalism of evolvable discrete-event systems %A Tigane, Samir %A KAHLOUL, Laid %A BENHARZALLAH, Saber %A Baarir, Souheib %A Samir BOUREKKACHE %B Science of Computer ProgrammingScience of Computer Programming %V 183 %P 102302 %8 2019 %@ 0167-6423 %G eng %0 Conference Proceedings %B The 1st National Seminar in Geosciences and Environment (SGSE 2019) %D 2019 %T Reconsideration of the Cenomanian-Turonian stratigraphics units in the Tebessa region (Algero-TunisienConfines): Petroleum implications %A Imen, Chairat %A Fouad, DJAIZ %A Mabrouk, Boughdiri %X

The Algero-Tunisian confines (Tebessa region) is partially composed of Cenomano- Turonian carbonate outcrops; therefore, it presents a good example to highlight the black shale levels reported over a short period, around the Cenomanian-Turonian boundary. The lithostratigraphic study made it possible to specify the paleoenvironment during the Cenomano-Turonian in the Tebessa region. At that time, the depositional environment emphasized a relatively deep, calm and often confined ocean environment that was significantly shalloweron the north part of the study area. The lithology and the distribution of the facies in the Constantine domain allow us to underline the pelagic influences during the Upper Cretaceous and neritic during the lower Cretaceous period. We note a maximum thickness of the Cenomano- Turonian in the southern zones and a minimum (100m) appears further north. This Palaeogeographic organization continue laterally in Tunisia on the extension of the Constantine mole.

%B The 1st National Seminar in Geosciences and Environment (SGSE 2019) %C Tamanrasset, Algeria %8 2019 %G eng %U https://www.researchgate.net/publication/337011266_Reconsideration_of_the_Cenomanian-Turonian_stratigraphic_units_in_the_Tebessa_region_Algero-Tunisian_Confines_Petroleum_implications %0 Journal Article %J Recent Advances in Electrical & Electronic Engineering, DOI : 10.2174/2352096511666180523095219Recent Advances in Electrical & Electronic Engineering, DOI : 10.2174/2352096511666180523095219 %D 2019 %T Reduction of the Low Voltage Substation Constraints by Inserting Photovoltaic Systems in Underserved Areas %A N. Benbouza %A L. Benfarhi %A Boubekeur Azoui %B Recent Advances in Electrical & Electronic Engineering, DOI : 10.2174/2352096511666180523095219Recent Advances in Electrical & Electronic Engineering, DOI : 10.2174/2352096511666180523095219 %V 12 %P 102-107 %8 2019 %G eng %0 Journal Article %J Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering)Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering) %D 2019 %T Reduction of the Low Voltage Substation Constraints by Inserting Photovoltaic Systems in Underserved Areas %A Benbouza Naima %A Benfarhi Louiza %A Azoui Boubekeur %B Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering)Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering) %V 12 %P 105-112 %8 2019 %@ 2352-0965 %G eng %0 Journal Article %J International Journal of Digital Signals and Smart SystemsInternational Journal of Digital Signals and Smart Systems %D 2019 %T Regrouping of acoustics microwaves in piezoelectric material (ZnO) by SVM classifier, ISSN / e-ISSN 2398-0311 / 2398-032X %A Hichem, Hafdaoui %A Djamel, Benatia %X In this paper, we propose a new numerical method for acoustics microwaves detection of an acoustics microwaves signal during the propagation of acoustics microwaves in a piezoelectric substrate zinc oxide (ZnO). We have used support vector machines (SVMs), the originality of this method is the accurate values that provides this technique help to identify undetectable waves that we can not identify with the classical methods. We classify all the values of the real part and the imaginary part of the coefficient attenuation with the acoustic velocity in order to build a model from which we note the types of microwaves acoustics (bulk waves or surface waves or leaky waves). We obtain accurate values for each of the coefficient attenuation and acoustic velocity. This study will be very interesting in modelling and realisation of acoustics microwaves devices (ultrasound, radiating structures, filter SAW…) based on the propagation of acoustics microwaves. %B International Journal of Digital Signals and Smart SystemsInternational Journal of Digital Signals and Smart Systems %V Volume 3 %P pp 110 - 120 %8 2019 %G eng %0 Journal Article %J International Journal of Digital Signals and Smart SystemsInternational Journal of Digital Signals and Smart Systems %D 2019 %T Regrouping of acoustics microwaves in piezoelectric material (ZnO) by SVM classifier %A Hichem Hafdaoui %A Benatia, Djamel %B International Journal of Digital Signals and Smart SystemsInternational Journal of Digital Signals and Smart Systems %V 3 %P 110-120 %8 2019 %@ 2398-0311 %G eng %0 Journal Article %J International Journal of Computer Aided Engineering and TechnologyInternational Journal of Computer Aided Engineering and Technology %D 2019 %T Reliability and safety analysis using fault tree and Bayesian networks %A Hamza, Zerrouki %A Hacene, Smadi %B International Journal of Computer Aided Engineering and TechnologyInternational Journal of Computer Aided Engineering and Technology %V 11 %P 73-86 %8 2019 %@ 1757-2657 %G eng %0 Journal Article %J Computer NetworksComputer Networks %D 2019 %T Resource allocation scheme for 5G C-RAN: A Swarm Intelligence based approach %A Ari, Ado Adamou Abba %A Gueroui, Abdelhak %A Titouna, Chafiq %A Thiare, Ousmane %A Aliouat, Zibouda %B Computer NetworksComputer Networks %V 165 %P 106957 %8 2019 %@ 1389-1286 %G eng %0 Conference Proceedings %B Congrès maghrébin d'Hématologie , Octobre %D 2019 %T Résultats du traitement par Imatib* d'une série de 110 patients présentant une leucémie myéloïde chronique en phase chronique : étude mono centrique sur une période de 10 ans %A Soltani, F. %A Kacha, F. %A Saidi, M. %B Congrès maghrébin d'Hématologie , Octobre %C Alger, Algérie %8 2019 %G eng %0 Conference Proceedings %B 72nd Canadian Geotechnical Conference %D 2019 %T Reviewing the potential anthropogenic sources of groundwater contamination - Case study of the expanding urban area of Taleza in Algeria. %A Lamine, Boumaiza %A Nabil, Chabour %A Tarek, Drias %X

Located in northeast Algerian, the coastal aquifer of Taleza constitutes a significant source of groundwater. It contains hundreds of private wells installed by the population for several purposes including drinking water. Recently, the groundwater has become quite salinized. Furthermore, some people have noted the presence of a bad odor, as rotten eggs, in the groundwater pumped from their wells. The groundwater quality is mostly controlled by two factors: 1) natural processes related to aquifer lithology, and soil/rock interactions with groundwater, and 2) anthropogenic activities. However, the later activities can be considered as the most serious sources of groundwater contamination. This paper describes a review of potential anthropogenic sources of groundwater contamination over the Taleza territory. Several different potential anthropogenic sources were identified, such as cultivated fields, private sanitation systems, random urbanisation, over-exploitation of groundwater, solid waste dumpsites, and cemeteries. Consequently, efficient and durable groundwater protection planning is urgently required, to limit and possibly remediate groundwater contamination related to anthropogenic activities.

%B 72nd Canadian Geotechnical Conference %C Canada %8 2019 %G eng %0 Conference Proceedings %B Proceedings of the 3rd International Conference on Future Networks and Distributed Systems %D 2019 %T Road obstacle detection %A Ramzi, Mosbah %A GUEZOULI Larbi %A Lyamine, Guezouli %B Proceedings of the 3rd International Conference on Future Networks and Distributed Systems %P 1-5 %8 2019 %G eng %0 Journal Article %J International Journal of Industrial and Systems EngineeringInternational Journal of Industrial and Systems Engineering %D 2019 %T Robust integral backstepping control with extended Kalman filter of permanent magnet synchronous motor %A Bakhti, Ibtissem %A Chaouch, Souad %A Makouf, Abdessalam %A Douadi, Tarek %B International Journal of Industrial and Systems EngineeringInternational Journal of Industrial and Systems Engineering %V 31 %P 1-14 %8 2019 %@ 1748-5037 %G eng %0 Journal Article %J International Journal of High Performance Computing and NetworkingInternational Journal of High Performance Computing and Networking %D 2019 %T ROI-based fragile watermarking for medical image tamper detection %A Goléa, Nour El-Houda %A Melkemi, Kamal Eddine %B International Journal of High Performance Computing and NetworkingInternational Journal of High Performance Computing and Networking %V 13 %P 199-210 %8 2019 %@ 1740-0562 %G eng %0 Conference Proceedings %B 3ème Journée Internationale d’Infectiologie de L’EHS El Hadi Flici ex El Kettar, %D 2019 %T Rougeole et maladie auto-immune : à propos d’un cas exceptionnel de rougeole sur lupus sous corticothérapie prolongée %A Khamsa, Mokrani %B 3ème Journée Internationale d’Infectiologie de L’EHS El Hadi Flici ex El Kettar, %C Alger, Algérie %8 2019 %G eng %0 Journal Article %J Journal of Biological Research-Bollettino della Società Italiana di Biologia SperimentaleJournal of Biological Research-Bollettino della Società Italiana di Biologia Sperimentale %D 2019 %T Safety evaluation and analgesic studies of defatted methanol extract of Capparis spinosa L.(Capparidaceae) fruits and roots bark in albino wistar rats %A Meddour, Asma %A Yahia, Mouloud %A Hambaba, Leila %B Journal of Biological Research-Bollettino della Società Italiana di Biologia SperimentaleJournal of Biological Research-Bollettino della Società Italiana di Biologia Sperimentale %V 92 %8 2019 %@ 2284-0230 %G eng %0 Journal Article %J International Journal of Applied Metaheuristic Computing (IJAMC)International Journal of Applied Metaheuristic Computing (IJAMC) %D 2019 %T Score Level Fusion of Palmprint, Face and Iris Using Adaptive PSO %A BOUCETTA, ALDJIA %A Melkemi, Kamal Eddine %B International Journal of Applied Metaheuristic Computing (IJAMC)International Journal of Applied Metaheuristic Computing (IJAMC) %V 10 %P 175-194 %8 2019 %G eng %0 Journal Article %J Peer-to-Peer Networking and ApplicationsPeer-to-Peer Networking and Applications %D 2019 %T Secure and reliable certification management scheme for large-scale MANETs based on a distributed anonymous authority %A Hamouid, Khaled %A Adi, Kamel %X This paper proposes a compromise-tolerant (t,n)-threshold certification management scheme for MANETs. Our solution allows to mitigate the impact of compromised nodes that participate in the certification service. In our design, certification management is achieved anonymously by an Anonymous Certification Authority (ACA). The latter is fully distributed into multiple disjointed coalitions of nodes whose structure is made hidden. This prevents an adversary from taking the control of the ACA by arbitrarily compromising t or more nodes. In other words, our proposal enhances the compromise-tolerance to more than the threshold number t of nodes without breaking down the whole certification system. As a result, our scheme requires a very smaller threshold than traditional schemes, which improves considerably the service availability. The experimental study shows a clear advantage over traditional threshold-based certification schemes by ensuring a significant positive compromise between security and availability of certification service. %B Peer-to-Peer Networking and ApplicationsPeer-to-Peer Networking and Applications %V 12 %P 1137–1155 %8 2019 %G eng %0 Conference Proceedings %B Proceedings of the 9th international conference on information systems and technologies %D 2019 %T Security for internet of things: A state of the art on existing protocols and open research issues %A Mahmoud, Chaira %A Sofiane Aouag %B Proceedings of the 9th international conference on information systems and technologies %P 1-6 %8 2019 %G eng %0 Journal Article %J Operators and MatricesOperators and Matrices %D 2019 %T SELFADJOINT OPERATORS, NORMAL OPERATORS, AND CHARACTERIZATIONS %A Ameur, Seddik %X Let B(H) be the C* -algebra of all bounded linear operators acting on a complex separable Hilbert space H . We shall show that: 1. The class of all selfadjoint operators in B(H) multiplied by scalars is characterized by ∀X ∈ B(H), S2X +XS2 =>2||SXS||, (S ∈ B(H)). 2. The class of all normal operators in B(H) is characterized by each of the three following properties (where DS = S*S-SS* , for S ∈ B(H)), (i) ∀X ∈ B(H), S2X + XS2 =>2||SXS||,(S ∈ B(H)), (ii) S*DSS = 0 = SDSS*,(S ∈ B(H)), (iii) S*DSS=> 0 =>SDSS*,(S ∈ B(H)).   %B Operators and MatricesOperators and Matrices %V 13 %P 835–842 %8 2019 %G eng %0 Journal Article %J Operators and MatricesOperators and Matrices %D 2019 %T Selfadjoint operators, normal operators, and characterizations %A Seddik, Ameur %B Operators and MatricesOperators and Matrices %V 13 %P 835-842 %8 2019 %G eng %0 Conference Proceedings %B 2019 15th International Wireless Communications & Mobile Computing Conference (IWCMC) %D 2019 %T Self-organization smart protocol for mobile wireless sensor networks %A Lyamine Guezouli %A Kamel Barka %A Samir Gourdache %A Djallel Eddine Boubiche %B 2019 15th International Wireless Communications & Mobile Computing Conference (IWCMC) %I IEEE %P 1002-1006 %8 2019 %@ 1-5386-7747-4 %G eng %0 Conference Proceedings %B 15th International Wireless Communications & Mobile Computing Conference (IWCMC) %D 2019 %T Self-organization Smart Protocol for Mobile Wireless Sensor Networks %A Lyamine Guezouli %A Kamel Barka %A Samir Gourdache %A Djallel Eddine Boubiche %X In this paper, we propose a novel self-organization protocol for wireless sensor networks (WSNs) assisted by Unmanned Aerial Vehicle (UAV or Drone) called SSP (Self-organization Smart Protocol). In order to provide energy efficiency, low latency, high success rate and suitably interactions between sensors and UAVs while taking advantage of the air mobility (fly) and resource available on the UAVs in the network. The UAVs move according to RWP (Random Waypoint) mobility model. Each UAV, during its pause time at a known height, creates a temporary cluster, and acts as its head, collects and processes sensor data and performs actions on the environment based on the information gathered from sensor nodes in its cluster. Once an UAV detects a base station (BS) it forwards the collected data to it. The results of the simulations show the high performance of the proposed algorithm. %B 15th International Wireless Communications & Mobile Computing Conference (IWCMC) %C Tangier, Morocco %8 2019 %G eng %U 10.1109/IWCMC.2019.8766740 %0 Journal Article %J IEEE AccessIEEE Access %D 2019 %T Sensitive and Energetic IoT Access Control for Managing Cloud Electronic Health Records %A Riad, Khaled %A Hamza, Rafik %A Yan, Hongyang %X Electronic health records (EHRs) replaced the old paper-based systems to make patient data more accurate, reliable, and more accessible. Yet, the EHRs system requires high transmission cost, energy, and waste of time for both doctors and patients. Furthermore, EHRs security presents a serious issue threatening the patient’s privacy. Most of the third-party hosting systems have some issues related to the users’ privacy and data security. Hence, it is necessary to restrict the access control policies and develop efficient mechanisms for cloud-based EHRs data. In this paper, a sensitive and energetic access control (SE-AC) mechanism is proposed for managing the cloud-hosted EHRs and providing a fine-grained access control even in critical situations. The proposed mechanism ensures the confidentiality of the patient’s data, where only authorized individuals to have permission to be able to edit or review certain of the patient’s data. Each EHR data is encrypted by the managing authority before submitting to the cloud storage. The requesting user can get dynamically changing permissions based on authentication and context attributes. In addition, seven major aspects have been quantified to assess the operation of any access control that could be deployed in the Internet-of-Thing (IoT). The security analysis indicates that the SE-AC mechanism is secure and will prevent any unauthorized access. The results show exceptional compatibility and performance with different setups and configuration. %B IEEE AccessIEEE Access %V 7 %P 86384 - 86393 %8 2019 %G eng %0 Conference Proceedings %B International Conference on Electrical Engineering and Control Applications %D 2019 %T Sensorless Speed Control of Induction Motor Used Differential Flatness Theory %A Beddiaf, Yassine %A Zidani, Fatiha %A CHRIFI-ALAOUI, Larbi %B International Conference on Electrical Engineering and Control Applications %I Springer %P 3-21 %8 2019 %G eng %0 Conference Proceedings %B 4ème conférence internationale d’infectiologie %D 2019 %T Séroconversion HBs spontanée chez les porteurs chroniques du VHB suivis au service d’infectiologie de Batna. %A Soraya, Tebbal %B 4ème conférence internationale d’infectiologie %C Oran, Algeria %8 2019 %G eng %0 Journal Article %J International Journal of Communication Networks and Distributed SystemsInternational Journal of Communication Networks and Distributed Systems %D 2019 %T Service composition approaches for internet of things: a review %A AOUDIA, Idir %A BENHARZALLAH, Saber %A KAHLOUL, Laid %A Okba KAZAR %B International Journal of Communication Networks and Distributed SystemsInternational Journal of Communication Networks and Distributed Systems %V 23 %P 194-230 %8 2019 %@ 1754-3916 %G eng %0 Conference Proceedings %B CITSC %D 2019 %T Shot Boundary Detection: Fundamental Concepts and Survey. %A Halim, Benoughidene Abdel %A Faiza, Titouna %B CITSC %P 34-40 %8 2019 %G eng %0 Journal Article %J Scalable Computing: Practice and ExperienceScalable Computing: Practice and Experience %D 2019 %T SIMD Implementation of the Aho-Corasick Algorithm Using Intel AVX2 %A Ourlis, Lazhar %A Djamel Bellala %B Scalable Computing: Practice and ExperienceScalable Computing: Practice and Experience %V 20 %P 563-576 %8 2019 %@ 1895-1767 %G eng %0 Conference Proceedings %B 2019 Global Information Infrastructure and Networking Symposium (GIIS) %D 2019 %T A Simple Proactive Routing Protocol with Multiple Base Stations Deployment for Unmanned Aerial Vehicular Networks %A Nour El Houda Bahloul %A Bashir, Nouman %A Saadi Boudjit %A Djallel Eddine Boubiche %B 2019 Global Information Infrastructure and Networking Symposium (GIIS) %I IEEE %P 1-6 %8 2019 %@ 1-72816-796-5 %G eng %0 Journal Article %J Instrumentation, Mesures, MétrologiesInstrumentation, Mesures, Métrologies %D 2019 %T Sliding Control with Fuzzy Type-2 Controller of Wind Energy System Based on Doubly Fed Induction Generator. %A Zouggar, El Oualid %A Chaouch, Souad %A Abdeslam, Djaffar Ould %A Abdelhamid, Abdelhamid Lilia %B Instrumentation, Mesures, MétrologiesInstrumentation, Mesures, Métrologies %V 18 %8 2019 %@ 1631-4670 %G eng %0 Journal Article %J European Journal of Electrical EngineeringEuropean Journal of Electrical Engineering %D 2019 %T Sliding Mode Control of a Grid-Connected Brushless Doubly Fed Induction Generator %A Moussa, Oussama %A Abdessemed, Rachid %A Said Benaggoune %A Benguesmia, Hani %X This paper designs an indirect power control method for brushless doubly fed induction generator (BDFIG), in which the stator is attached to grid with back-to-back space vector modulation (SVM) converter that converts the generated wind power. Our control method is a sliding mode control based on the theory of variable structure control. Specifically, the active and reactive powers, which are exchanged between the stator of the BDFIG and the grid in a linear and decoupled manner, are subjected to decoupled, vector control. In addition, a proportional integral (PI) controller was implemented to keep the DC-voltage constant for the back-to-back SVM converter. The efficiency of our control strategy was validated through simulation. The research greatly promotes the control of renewable energy generators. %B European Journal of Electrical EngineeringEuropean Journal of Electrical Engineering %V 21 %P 421-430 %8 11 2019 %G eng %0 Journal Article %J Studia Geotechnica et MechanicaStudia Geotechnica et Mechanica %D 2019 %T Slurry shield tunneling in soft ground. Comparison between field data and 3D numerical simulation %A Beghoul, Mohammed %A Demagh, Rafik %B Studia Geotechnica et MechanicaStudia Geotechnica et Mechanica %V 41 %P 115-128 %8 2019 %G eng %0 Conference Proceedings %B Proceedings of the 15th ACM International Symposium on QoS and Security for Wireless and Mobile Networks %D 2019 %T Smart iot notification system for efficient in-city parking %A Merzoug, Mohammed Amine %A Mostefaoui, Ahmed %A Benyahia, Abderrezak %B Proceedings of the 15th ACM International Symposium on QoS and Security for Wireless and Mobile Networks %P 37-42 %8 2019 %G eng %0 Journal Article %D 2019 %T SOME PROPERTIES OF COMMON HERMITIAN SOLUTIONS OF MATRIX EQUATIONS A1XA %A Merahi, Warda %A Guedjiba, Said %8 2019 %G eng %0 Journal Article %J MATEMATICKI VESNIK ˇ MATEMATIQKI VESNIKMATEMATICKI VESNIK ˇ MATEMATIQKI VESNIK %D 2019 %T SOME PROPERTIES OF COMMON HERMITIAN SOLUTIONS OF MATRIX EQUATIONS A1XA*1= B1 AND A2XA∗2 = B2 %A Merahi, Warda %A Guedjiba, Said %B MATEMATICKI VESNIK ˇ MATEMATIQKI VESNIKMATEMATICKI VESNIK ˇ MATEMATIQKI VESNIK %V 71 %P 214–229 %8 2019 %G eng %0 Journal Article %J International Journal of Intelligent Engineering InformaticsInternational Journal of Intelligent Engineering Informatics %D 2019 %T Speed control of a doubly-fed induction machine based on fuzzy adaptive %A Saidi, Abderazak %A Naceri, Farid %B International Journal of Intelligent Engineering InformaticsInternational Journal of Intelligent Engineering Informatics %V 7 %P 61-76 %8 2019 %@ 1758-8715 %G eng %0 Journal Article %J Neural Computing and ApplicationsNeural Computing and Applications %D 2019 %T Speed limit sign detection and recognition system using SVM and MNIST datasets %A Saadna, Yassmina %A Behloul, Ali %A Mezzoudj, Saliha %X This article presents a computer vision system for real-time detection and robust recognition of speed limit signs, specially designed for intelligent vehicles. First, a new segmentation method is proposed to segment the image, and the CHT transformation (circle hog transform) is used to detect circles. Then, a new method based on local binary patterns is proposed to filter segmented images in order to reduce false alarms. In the classification phase, a cascading architecture of two linear support vector machines is proposed. The first is trained on the GTSRB dataset to decide whether the detected region is a speed limit sign or not, and the second is trained on the MNIST dataset to recognize the sign numbers. The system achieves a classification recall of 99.81% with a precision of 99.08% on the GTSRB dataset; in addition, the system is also tested on the BTSD and STS datasets, and it achieves a classification recall of 99.39% and 98.82% with a precision of 99.05% and 98.78%, respectively, within a processing time of 11.22 ms. %B Neural Computing and ApplicationsNeural Computing and Applications %V 31 %P 5005–5015 %8 2019 %G eng %0 Journal Article %J ICOFAAS 2019ICOFAAS 2019 %D 2019 %T Stability of polyphenoloxidase and peroxidase activities of Deglet Nour and Ghars dates at different pH and temperatures %A Dassamiour, Saliha %A Hambaba, Leila %B ICOFAAS 2019ICOFAAS 2019 %P 363 %8 2019 %G eng %0 Journal Article %J Int. J. Eng. Adv. TechnolInt. J. Eng. Adv. Technol %D 2019 %T Static strength analysis of a full-scale 850 kW wind turbine steel tower %A Ferroudji, F %B Int. J. Eng. Adv. TechnolInt. J. Eng. Adv. Technol %V 8 %P 403-406 %8 2019 %G eng %0 Journal Article %J Journal of Fundamental and Applied SciencesJournal of Fundamental and Applied Sciences %D 2019 %T statistical and hydrochemical classification of underground waters in a multi-layer aquifer system in an arid zone: application to chott el gharbi basin (extreme west of algeria), ISSN: 1112-9867 %A A, Boudjema %A Sabrine, Guettaia %A Nafaa, Brinis %B Journal of Fundamental and Applied SciencesJournal of Fundamental and Applied Sciences %V volume 11 %P pp.786-803 %8 2019 %G eng %0 Journal Article %J Journal of Fundamental and Applied Sciences %D 2019 %T STATISTICAL AND HYDROCHEMICAL CLASSIFICATION OF UNDERGROUND WATERS IN A MULTI-LAYER AQUIFER SYSTEM IN AN ARID ZONE: APPLICATION TO CHOTT EL GHARBI BASIN (EXTREME WEST OF ALGERIA) %A Boudjema, A %A Guettaia, S %A Brinis, N %B Journal of Fundamental and Applied Sciences %V 11 %P 786-803 %8 2019 %@ 1112-9867 %G eng %0 Journal Article %J IETE Journal of ResearchIETE Journal of Research %D 2019 %T Study of an Inverted Rectangular Patch Printed on Anisotropic Substrates (In press), e-ISSN 0974-780X %A Sami, Bedra %A Randa, Bedra %A Siham, Benkouda %A Tarek, Fortaki %X The resonant frequencies and bandwidths of the inverted rectangular patch over anisotropic substrates are investigated in this paper. A rigorous analysis is performed using dyadic Green’s function formulation in the vector Fourier transform domain. The Galerkin’s technic is then used in the resolution of the integral equation; the complex resonance frequencies for the TM01 mode are studied with sinusoidal basis functions. The numerical results obtained are compared with previously published numerical results computed by means of the electromagnetic simulator “IE3D software”. Good agreement is found in all cases among all sets of results. For an isotropic substrate, it is confirmed that the bandwidth decreases with increasing of air-gap layer for high permittivity and low thickness of the substrate. Also, we show that the resonant frequencies and bandwidths are highly dependent on the permittivity variations alongside the optical axis. Other theoretical results attained display that the resonant frequencies downtrend monotonically with increasing substrate thickness, the diminution being larger for the uniaxial anisotropy of the substrate. Finally, numerical results for the effects of uniaxial anisotropy in the substrate on the radiation of the inverted rectangular microstrip structure are also presented. %B IETE Journal of ResearchIETE Journal of Research %8 2019 %G eng %0 Journal Article %J IETE Journal of ResearchIETE Journal of Research %D 2019 %T Study of an inverted rectangular patch printed on anisotropic substrates %A BEDRA, Sami %A BEDRA, Randa %A BENKOUDA, Siham %A FORTAKI, Tarek %B IETE Journal of ResearchIETE Journal of Research %P 1-8 %8 2019 %@ 0377-2063 %G eng %0 Journal Article %J Pan Arab Journal of Oncology %D 2019 %T Study of dietary risk factors for breast cancer in women in the region of Batna. ALGERIA Case-control study 2014-2015 %A Bouthayna, Chibou %A Toureche, K %A H Bounecer %X %B Pan Arab Journal of Oncology %V 12 %P 39-39 %8 2019 %G eng %N 2 %0 Journal Article %J Eur. J. Electr. EngEur. J. Electr. Eng %D 2019 %T Study of kinematic system for solar tracking of a linear Fresnel plant to reduce end losses %A Cucumo, Mario A %A Ferraro, Vittorio %A Kaliakatsos, Dimitrios %A Nicoletti, Francesco %A Pankratov, Evgeny Leonidovich %A Wang, Liang %A Wang, Shugang %A Wu, Dongliang %A Liu, Haihua %A Wang, Jie %B Eur. J. Electr. EngEur. J. Electr. Eng %V 21 %P 393-400 %8 2019 %G eng %0 Journal Article %J International Journal of Health Care Quality AssuranceInternational Journal of Health Care Quality Assurance %D 2019 %T Study of safety culture in healthcare institutions: case of an Algerian hospital %A BOUGHABA, A. %A ABERKANE, S. %A FOURAR, Y. %A DJBABRA, M. %X Purpose For many years, the concept of safety culture has attracted researchers from all over the world, and more particularly in the area of healthcare services. The purpose of this paper is to measure safety culture dimensions in order to improve and promote healthcare in Algeria. Design/methodology/approach The used approach consists of getting a better understanding of healthcare safety culture (HSC) by measuring the perception of healthcare professionals in order to guide promotion actions. For this, the Hospital Survey on Patient Safety Culture questionnaire was used in a pilot hospital setting where it was distributed on a number of 114 health professionals chosen by stratified random sampling. Findings The results showed that the identified priority areas for HSC improvement help in establishing a trust culture and a non-punitive environment based on the system and not on the individual. Originality/value Safety is recognized as a key aspect of service quality, thus measuring the HSC can help establish an improvement plan. In Algerian health facilities, this study is considered the first to examine perceptions in this particular area. The current results provide a baseline of strengths and opportunities for healthcare safety improvement, allowing the managers of this type of facilities to take steps that are more effective. %B International Journal of Health Care Quality AssuranceInternational Journal of Health Care Quality Assurance %V 2019 %P 1081-1097 %8 2019 %G eng %0 Journal Article %J Advanced ElectromagneticsAdvanced Electromagnetics %D 2019 %T Study of Stacked High Tc Superconducting Circular Disk Microstrip Antenna in Multilayered Substrate Containing Isotropic and/or Uniaxial Anisotropic Materials %A Boughrara, Akrame Sofiane %A BENKOUDA, Siham %A Bouraiou, Abdelouahab %A FORTAKI, Tarek %B Advanced ElectromagneticsAdvanced Electromagnetics %V 8 %P 1-5 %8 2019 %@ 2119-0275 %G eng %0 Journal Article %J Advanced ElectromagneticsAdvanced Electromagnetics %D 2019 %T Study of Stacked High Tc Superconducting Circular Disk Microstrip Antenna in Multilayered Substrate Containing Isotropic and/or Uniaxial Anisotropic Materials, e-ISSN %A Sofiane, Boughrara Akrame %A Siham, Benkouda %A Abdelouahab, Bouraiou %A Tarek, Fortaki %X In this paper, we present a rigorous full-wave analysis able to estimate exactly the resonant characteristics of stacked high Tc superconducting circular disk microstrip antenna. The superconducting patches are assumed to be embedded in a multilayered substrate containing isotropic and/or uniaxial anisotropic materials (the analysis is valid for an arbitrary number of layers). London’s equations and the two-fluid model of Gorter and Casimir are used in the calculation of the complex surface impedance of the superconducting circular disks. Numerical results are presented for a single layer structure as well as for two stacked circular disks fabricated on a double-layered substrate. %B Advanced ElectromagneticsAdvanced Electromagnetics %V Volume 8 %8 2019 %G eng %0 Conference Proceedings %B Defect and Diffusion Forum %D 2019 %T Study of the Effect of Aging on Precipitation in Wire Drawn and Annealed Aluminum Alloy (AGS) %A Bayarassou, Mokhtar %A Baira, F %A Zidani, Mosbah %A Djimaoui, T %A FEDAOUI, Kamel %B Defect and Diffusion Forum %I Trans Tech Publ %V 397 %P 76-80 %8 2019 %@ 3-0357-1571-8 %G eng %0 Journal Article %J International Journal of Electrical & Computer EngineeringInternational Journal of Electrical & Computer Engineering %D 2019 %T Study of two-layered circular patch using moment method and genetic Algorithms, e-ISSN 2088-8708 %A Ahmed, Mahamdi %A Siham, Benkouda %A Amir, Mounir %A Sami, Bedra %X In this paper, new expressions for the effective radius and fringing capacitance have been derived to predict accurately the resonant frequency of the two-layered circular microstrip patch antenna. These expressions are obtained based on genetic algorithm and the data base is generated using moment method (MOM). The proposed model is very simple, fast, and valid for an entire range of permittivities and thicknesses of two-layered substrate. The present model has been validated by comparing our numerical results obtained for the resonant frequencies with measurements. Finaly, the effect of the two-layered substrate on the resonant charateristics of the circular microstrip patch antenna has been presented. %B International Journal of Electrical & Computer EngineeringInternational Journal of Electrical & Computer Engineering %V Volume 9 %P pp 5368 - 5375 %8 2019 %G eng %0 Conference Proceedings %B 2019 International Conference on Advanced Electrical Engineering (ICAEE) %D 2019 %T A Study with Simulation of Range Free Localization Techniques in Wireless Sensors Networks %A Mehannaoui, Raouf %A Mouss, Kinza Nadia %B 2019 International Conference on Advanced Electrical Engineering (ICAEE) %I IEEE %P 1-4 %8 2019 %@ 1-72812-220-1 %G eng %0 Thesis %D 2019 %T Suivi piézométrique et hydrochique de l&⋕39;aquifère alluvionnaire de Ain Djasser %A Nadjet, Mekhloufi %A Dhaouia, Bastal %8 2019 %G eng %9 Master's Thesis %0 Journal Article %J International Journal of Embedded and Real-Time Communication Systems (IJERTCS)International Journal of Embedded and Real-Time Communication Systems (IJERTCS) %D 2019 %T Superposed Redundancy Approach for Building Reliable Communication in Multi-Bus Heterogeneous Systems %A Chafik Arar %B International Journal of Embedded and Real-Time Communication Systems (IJERTCS)International Journal of Embedded and Real-Time Communication Systems (IJERTCS) %V 10 %P 1-21 %8 2019 %G eng %0 Journal Article %J International Journal of System Assurance Engineering and ManagementInternational Journal of System Assurance Engineering and Management %D 2019 %T Super-twisting sliding mode control for brushless doubly fed induction generator based on WECS %A Moussa, Oussama %A Abdessemed, Rachid %A Said Benaggoune %X This paper deals with the robust power control of a grid-connected brushless doubly-fed induction generator (BDFIG) driven by the variable speed wind turbine. With the using of a super twisting algorithm which is a high-order sliding mode controller (HOSMC). This approach guarantees both the dynamic performance and the same robustness as traditional first order (SMC) algorithm and reduces the chattering phenomenon, which is the biggest disadvantage in the implementation of this technique. The developed algorithm relies on the decoupling control by implementing the strategy of oriented grid flux vector control. In order to enhance the desired performances, an attempt is made by controlling the generated stator active and reactive powers in a linear and decoupled manner to ensure the global asymptotical stability, HOSMC approach is implemented. Therefore, an optimal operation of the BDFIG in sub-synchronous operation is used in addition to the stator power flows where the stator power factor is kept in a unity. The suggested method is examined with the Matlab/Simulink software. The performances and the feasibility of the designed control are illustrated by simulation results. %B International Journal of System Assurance Engineering and ManagementInternational Journal of System Assurance Engineering and Management %V 10 %P 1145–1157 %8 08 2019 %G eng %0 Thesis %B Génie industriel %D 2019 %T Supervision de Robot Manipulateur virtuel par Les réseaux de neurones et les réseaux de Petri %A Ouahab, Grieb %X

Dans ce travail de thèse, nous avons proposé un système de supervision appliqué sur un robot manipulateur à deux degrés de liberté. La supervision est utilisée pour assurer la reconfiguration en temps réel du robot. Dans ce système nous avons utilisé une nouvelle méthode de détection de défaut (FD) de frottement visqueux du robot supervisé combinée avec un module de commande tolérante aux défauts (FTC).Le premier module, basé sur une méthode de traitement appliquée sur des résidus, va permettre la détection de défaut pour bien estimer les corrections nécessaires du deuxième module. Une évaluation de l’effet de défaut durant la supervision a été faite. Par ailleurs, le protocole TCP pour le transfert des données entre le robot superviseur et le robot supervisé a été utilisé. Les résultats de simulation montrent que la méthode proposée corrige l’effet de défaut en utilisant les données qui arrivent d’un robot superviseur à distance. Ensuite, nous avons proposé une implémentation matérielle sur cible FPGA de l’algorithme de supervision dont le but est de valider notre contribution et d’assurer un traitement en temps réel dans le cas où il y a des robots réels. Par ailleurs, une étude comparative entre les performances des deux implémentations a été effectuée

%B Génie industriel %8 2019 %G eng %U http://eprints.univ-batna2.dz/1880/ %9 Doctorat %0 Thesis %B Génie Industriel %D 2019 %T Supervision du système de clinkérisation par les systemes Immunitaires artificiels %A Ammar, Haboussi %X

Le diagnostic est une composante principale du module de supervision. Il consiste à déterminer à chaque instant le mode de fonctionnement dans lequel le système se trouve. Il s‟appuie sur une connaissance à priori des modes de fonctionnement et sur une connaissance instantanée matériellement par une nouvelle observation de l‟état du système. Il existe plusieurs approches pour réaliser le diagnostic, le choix d‟une approche est lié au mode de représentation de la connaissance. Dans une première étape, nous allons essayer de faire la distinction entre les systèmes, les systèmes compliqués et les systèmes complexes, les différents types de systèmes. Nous introduisons ensuite la fonction de supervision, des systèmes industriels et des ses fonctions surveillance, détection et diagnostic, et les différentes approches de diagnostic

%B Génie Industriel %8 2019 %G eng %U http://eprints.univ-batna2.dz/1038/ %9 Magister %0 Book Section %B Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art %D 2019 %T Surface settlement induced by shield tunneling–complete 3D numerical simulation on two case studies %A Beghoul, M %A Demagh, R %B Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art %I CRC Press %P 5334-5340 %8 2019 %@ 0-429-42444-2 %G eng %0 Journal Article %J Journal of Digital Information ManagementJournal of Digital Information Management %D 2019 %T A Survey on vehicular ad-hoc networks routing protocols: classification and challenges %A Tassoult, Nadia %A Amad, Mourad %A Hamouma Moumen %A Kalla, Hamoudi %B Journal of Digital Information ManagementJournal of Digital Information Management %V 17 %P 227-244 %8 2019 %G eng %0 Journal Article %J SciSci %D 2019 %T Synthesis, Structural Characterization, and Biological Activities of Organically Templated Cobalt Phosphite (C4H14N2)[Co (H2PO3) 4]· 2H2O %A Hamdi, Najlaa %A Chaouch, Souad %A da Silva, Ivan %A Ezahri, Mohamed %A Lachkar, Mohammed %A Alhasan, Rama %A Abdin, Ahmad Yaman %A Jacob, Claus %A Bali, Brahim El %B SciSci %V 1 %P 64 %8 2019 %@ 2413-4155 %G eng %0 Journal Article %D 2019 %T Synthesis, Structural Characterization, and Biological Activities of Organically Templated Cobalt Phosphite (C4N2H14) Co (H2PO3) 4· 2H2O %A Hamdi, Najlaa %A Chaouch, Souad %A da Silva, Ivan %A Ezahri, Mohamed %A Lachkar, Mohammed %A Alhasan, Rama %A Abdin, Ahmad Yaman %A Jacob, Claus %A Bali, Brahim El %8 2019 %@ 2413-4155 %G eng %0 Journal Article %J International Journal of Business Information SystemsInternational Journal of Business Information Systems %D 2019 %T A systematic review on opinion mining and sentiment analysis in social media %A Salah, Zaher %A Al-Ghuwairi, Abdel-Rahman F %A Baarah, Aladdin %A Aloqaily, Ahmad %A Qadoumi, Bar'a %A Alhayek, Momen %A Alhijawi, Bushra %B International Journal of Business Information SystemsInternational Journal of Business Information Systems %V 31 %P 530-554 %8 2019 %@ 1746-0972 %G eng %0 Journal Article %J International Journal of Communication Networks and Distributed SystemsInternational Journal of Communication Networks and Distributed Systems %D 2019 %T Task allocation-based modified bacterial foraging algorithm for maximising reliability of a heterogeneous distributed system %A Abbache, Farid %A Kalla, Hamoudi %B International Journal of Communication Networks and Distributed SystemsInternational Journal of Communication Networks and Distributed Systems %V 23 %P 252-273 %8 2019 %@ 1754-3916 %G eng %0 Journal Article %J Applied Physics AApplied Physics A %D 2019 %T Temperature and SiO2/4H-SiC interface trap effects on the electrical characteristics of low breakdown voltage MOSFETs %A Bencherif, H %A Dehimi, L %A Pezzimenti, F %A Della Corte, FG %B Applied Physics AApplied Physics A %V 125 %P 1-10 %8 2019 %@ 1432-0630 %G eng %0 Journal Article %J International Journal of Reliability, Quality and Safety EngineeringInternational Journal of Reliability, Quality and Safety Engineering %D 2019 %T A Temporal Neuro-Fuzzy System for Estimating Remaining Useful Life in Preheater Cement Cyclones %A Mahdaoui, Rafik %A Leila Hayet Mouss %A Haboussi, Amar %A Chouhal, Ouahiba %A Haouassi, Hichem %A Maarouk, Toufik Messoud %B International Journal of Reliability, Quality and Safety EngineeringInternational Journal of Reliability, Quality and Safety Engineering %V 26 %P 1950012 %8 2019 %@ 0218-5393 %G eng %0 Conference Proceedings %B The Joint AGC/AMC/IAH-CNC Conference %D 2019 %T there still a chance to save the groundwater in Taleza aquifer ? %A Lamine, Boumaiza %A Nabil, Chabour %A Tarek, Drias %X

Located at the North-Eastern region of Algeria, the coastal aquifer of Taleza has a potential storage of groundwater. It contains hundreds of private wells installed by the population for several purposes including drinking water. Recently, the groundwater has become quite salinized. Furthermore, some people have given rise to the presence of a terrible odor, which smells as rotten eggs, in the groundwater pumped from their wells. Our first provided answer mentions that groundwater quality is mostly controlled by two factors: 1) the natural processes such as aquifer’s lithology, and soil/rock interactions with groundwater, and 2) anthropogenic activities such as agricultural production, industrial growth, urbanization with increasing exploitation of water resources, and private sanitation systems. However, the anthropogenic activities can be considered as the most serious sources of groundwater contamination. Unfortunately, most of Taleza’s people don’t have any idea about the anthropogenic groundwater contamination, and their raised question is « Is there still a chance to save the groundwater in Taleza aquifer? ». An urgent, efficient and durable groundwater protection planning is required in order to limit, and potentially improve the effects of the anthropogenic sources on groundwater quality within aquifer. In fact, determining the origin of saline components in aquifer of Taleza may provide more precision about the development of salinization process, and constitutes a useful tool to propose alternative solutions for ensuring the long-term protection of water resources. Accordingly, it is planned to perform a Multi-tracer study, combining isotopic and hydro-geochemical analysis, to identify the origin and fate of groundwater salinization. But firstly, the studying process will be started by reviewing the potential anthropogenic sources of groundwater contamination related to the Taleza territory. Our proposed communication describes a review of these potential anthropogenic sources, which potentially have led to the degradation of groundwater quality.

%B The Joint AGC/AMC/IAH-CNC Conference %C Quebec, Canada %8 2019 %G eng %U https://www.researchgate.net/publication/343536678_Is_there_still_a_chance_to_save_the_groundwater_in_Taleza_aquifer %0 Journal Article %J Russian Journal of Biomechanics/Rossijski Zurnal BiomehanikiRussian Journal of Biomechanics/Rossijski Zurnal Biomehaniki %D 2019 %T THERMOTAXIS PATTERN IN FLUID MEDIUM. %A Nguyen-Quang, T %A Alloui, Z %B Russian Journal of Biomechanics/Rossijski Zurnal BiomehanikiRussian Journal of Biomechanics/Rossijski Zurnal Biomehaniki %8 2019 %@ 1812-5123 %G eng %0 Journal Article %J Journal homepage: http://iieta. org/journals/ijhtJournal homepage: http://iieta. org/Journals/IJHT %D 2019 %T Three-dimensional numerical study of the anode supported intermediate temperature solid oxide fuel cell overheating %A Youcef, Sahli %A Bariza, Zitouni %A Houcine, Moungar %A Hocine, BM %B Journal homepage: http://iieta. org/journals/ijhtJournal homepage: http://iieta. org/Journals/IJHT %V 37 %P 1099-1106 %8 2019 %G eng %0 Journal Article %J IFAC Journal of Systems and ControlIFAC Journal of Systems and Control %D 2019 %T Tires-road forces estimation: Using sliding mode and triangular observer %A Hamadi, Nacer %A Imine, Hocine %A Ameddah, Djamel-Eddine %A Chari, Abdelhamid %B IFAC Journal of Systems and ControlIFAC Journal of Systems and Control %V 7 %P 100032 %8 2019 %@ 2468-6018 %G eng %0 Journal Article %J Multimedia Tools and ApplicationsMultimedia Tools and Applications %D 2019 %T Towards large-scale face-based race classification on spark framework %A Saliha, Mezzoudj %A Ali, Behloul %A Rachid, Seghir %X Recently, the identification of an individual race has become an important research topic in face recognition systems, especially in large-scale face images. In this paper, we propose a new large-scale race classification method which combines Local Binary Pattern (LBP) and Logistic Regression (LR) on Spark framework. LBP is used to extract features from facial images, while spark’s logistic regression is used as a classifier to improve the accuracy and speedup the classification system. The race recognition method is performed on Spark framework to process, in a parallel way, a large scale of data. The evaluation of our proposed method has been performed on two large face image datasets CAS-PEAL and Color FERET. Two major races were considered for this work, including Asian and Non-Asian races. As a result, we achieve the highest race classification accuracy (99.99%) compared to Linear SVM, Naive Bayesian (NB), Random Forest(RF), and Decision Tree (DT) Spark’s classifiers. Our method is compared against different state-of-the-art methods on race classification, the obtained results show that our approach is more efficient in terms of accuracy and processing time. %B Multimedia Tools and ApplicationsMultimedia Tools and Applications %V 78 %P 26729–26746 %8 2019 %G eng %0 Journal Article %D 2019 %T Transformation du granit: Caractérisation et contrôle de la poussière de la silice émise par le polissage %A Bahloul, Ali %A Jorge Vanterpool, Rafael Francisco %A Djebara, Abdelhakim %A Songmene, Victor %A Said, Mohamed Nejib %A Kouam, Jules %A Reggio, Marcelo %A Villalpando, Fernando %8 2019 %G eng %0 Journal Article %J KSCE Journal of Civil EngineeringKSCE Journal of Civil Engineering %D 2019 %T Treatment of collapsible soils by additions of granulated slag and natural pozzolan %A Ziani, Hocine %A Abbèche, Khelifa %A Messaoudene, Ibrahim %A Andrade Pais, LJ %B KSCE Journal of Civil EngineeringKSCE Journal of Civil Engineering %V 23 %P 1028-1042 %8 2019 %@ 1976-3808 %G eng %0 Journal Article %J Journal of Electromagnetic Waves and ApplicationsJournal of Electromagnetic Waves and Applications %D 2019 %T Tunability of metamaterial compact band-stop filters using YIG substrate %A Zermane, Aziza %A Sauviac, Bruno %A Djouablia, Linda %A Benghalia, Abdelmadjid %B Journal of Electromagnetic Waves and ApplicationsJournal of Electromagnetic Waves and Applications %V 33 %P 1726-1734 %8 2019 %@ 0920-5071 %G eng %0 Journal Article %J Information Security Journal: A Global PerspectiveInformation Security Journal: A Global Perspective %D 2019 %T Two dimensional ElGamal public key cryptosystem %A Djebaili, Karima %A Melkemi, Lamine %X In this work, we propose a secure version of ElGamal public key cryptosystem, and prove that it is semantically secure assuming the hardness of what we call the two-dimensional decisional Diffie-Hellman (2DDDH) problem, this cryptosystem is distinguished by the speed of encryption and decryption processes and by its resistance to active adversaries. Since the 2DDDH problem is harder than the decisional Diffie-Hellman (DDH) problem (as it will be seen), one may conclude that our model reinforces the exchange security compared to the existed cryptosystems falling within the same context, also we discuss the difficult problems that guarantee its security. %B Information Security Journal: A Global PerspectiveInformation Security Journal: A Global Perspective %V 28 %P 120-126 %8 2019 %G eng %0 Journal Article %J Applied AcousticsApplied Acoustics %D 2019 %T Uncertainty and sensitivity analysis of porous materials acoustic behavior %A Bouazizi, Leila %A Trabelsi, Hassen %A Othmani, Chokri %A Taktak, Mohamed %A CHAABANE, MABROUK %A Haddar, Mohamed %B Applied AcousticsApplied Acoustics %V 144 %P 64-70 %8 2019 %@ 0003-682X %G eng %0 Book Section %B Analysis, Probability, Applications, and Computation %D 2019 %T Uniform boundary stabilization of the wave equation with a nonlinear delay term in the boundary conditions %A Ghecham, Wassila %A Rebiai, Salah-Eddine %A Ali, Fatima Zohra Sidi %B Analysis, Probability, Applications, and Computation %I Springer %P 561-568 %8 2019 %G eng %0 Journal Article %J Journal of Renewable EnergiesJournal of Renewable Energies %D 2019 %T Unsteady temperature, heat transfer rate and HTF outlet temperature variation during charging of latent thermal energy storage unit %A Benmoussa, F %A Benzaoui, A %A Benmoussa, H %B Journal of Renewable EnergiesJournal of Renewable Energies %V 22 %P 49-58 %8 2019 %@ 2716-8247 %G eng %0 Journal Article %J African Journal of EcologyAfrican Journal of Ecology %D 2019 %T Using the MaxEnt model for assessing the impact of climate change on the Aurasian Aleppo pine distribution in Algeria %A Garah, Kenza %A Bentouati, Abdallah %B African Journal of EcologyAfrican Journal of Ecology %V 57 %P 500-511 %8 2019 %@ 0141-6707 %G eng %0 Journal Article %J Geographia TechnicaGeographia Technica %D 2019 %T VARIABILITY ANALYSIS OF TEMPORAL AND SPATIAL ANNUAL RAINFALL IN THE MASSIF OF AURES (EAST OF ALGERIA). %A KHENTOUCHE, ADEL %A Hadda DRIDI %B Geographia TechnicaGeographia Technica %V 14 %8 2019 %@ 1842-5135 %G eng %0 Conference Proceedings %B Conference of the Arabian Journal of Geosciences %D 2019 %T Vulnerability Mapping of Forest Fires Risk in the Bouhmama Region, Khenchela (East Algeria) %A Bouhata Rabah %A Bensekhria Aida %A Habibi Yahyaoui %B Conference of the Arabian Journal of Geosciences %I Springer %P 387-389 %8 2019 %G eng %0 Journal Article %J Bird StudyBird Study %D 2019 %T Weather conditions affect the collective roosting behaviour of the Cattle Egret Bubulcus ibis %A Youcefi, Abdeldjalil %A Baaloudj, Affef %A Zebsa, Rabah %A Mahdjoub, Hayat %A Bensakhri, Zinette %A Bensouilah, Soufyane %A Amari, Hichem %A Abdelkrim Si Bachir %A Khelifa, Rassim %B Bird StudyBird Study %V 66 %P 413-419 %8 2019 %@ 0006-3657 %G eng %0 Journal Article %J Основания, фундаменты и механика грунтовОснования, фундаменты и механика грунтов %D 2019 %T ЭКСПЕРИМЕНТАЛЬНОЕ ИССЛЕДОВАНИЕ ВЗАИМОДЕЙСТВИЯ БЛИЗКОРАСПОЛОЖЕННЫХ ПОЛОСОВЫХ ФУНДАМЕНТОВ НА СЛОИСТОМ НЕСВЯЗНОМ ГРУНТЕ Experimental study of interfere %A Boufarh, Rafik %A ABBECHE, Khalefa %A Abdelmadjid, ABDI %B Основания, фундаменты и механика грунтовОснования, фундаменты и механика грунтов %P 26 %8 2019 %@ 0038-0741 %G eng %0 Journal Article %J Journal of Central South UniversityJournal of Central South University %D 2019 %T 基于遗传算法和粒子群优化的模糊 PID 控制器在双星感应电机直接转矩控制中的应用 (英文) %A Ghoulemallah, BOUKHALFA %A Sebti, Belkacem %A Chikhi Abdesselem %A Said, BENAGGOUNE %B Journal of Central South UniversityJournal of Central South University %V 7 %8 2019 %G eng %0 Conference Proceedings %D 2019 %T Identification de la Qualité des Eaux Souterraines de la Région de Chemora -Est Algérien %A Ghodbane, Messaoud %A Mimeche, Omar %A Adjissi, Omar %A Boudoukha, Abderrahmane %X

L’eau représente la vie, on est donc sensé de la protéger contre toutes formes de pollution et de gaspillage par une gestion rationnelle pour assurer sa pérennité de point de vue quantitatif et qualitatif . A cet effet une étude est mené sur la plaine de chemora située dans la wilaya de Batna, qui s’ étalant sur une sur une superficie de 586 km2 , caractérisée par un climat semi aride avec des précipitations irrégulières d’une année à une autre (comprises entre 200 et 400 mm) et des températures variables d’une saison à l’autre ( de 4°C à 35°C). Cette plaine alluviale qui s’est développée le long de l’Oued de Chemora et ses affluents recèle une nappe alluviale exploitée par un pompage et représente l’un des atouts majeurs du développement socio-économique qu’a connu la région. Ces dernières années la région a connu une sècheresse remarquable et un pompage intense, ce qui engendré une baisse significative de ces réserves et influe sur la qualité de ces eaux souterraines. Afin de donner un aperçu scientifique sur le comportement hydrodynamique de la nappe alluviale de Chemora et sur la qualité ces eaux souterraines, une étude géologique, hydrogéologique et analyse de la qualité des eaux est effectuée par des différentes méthodes statistiques et graphiques de classifications des eaux souterraines.

%8 06 %G eng %U https://www.researchgate.net/publication/344637238_Identification_de_la_Qualite_des_Eaux_Souterraines_de_la_Region_de_Chemora_-Est_Algerien %0 Conference Proceedings %B 1st International Congress on Advances in Geotechnical Engineering and Construction Management ICAGECM’19 %D 2019 %T Analyse Mécano-Fiabiliste Des Structures En Béton Armé En Tenant Compte De L'interaction Sol-Structure %A Bezih, Kamel %A Chateauneuf, Alaa %A Demagh, Rafik %A Amrane, Moussa %X

Dans la conception courante des structures en béton armé, le comportement non linéaire du sol peut conduire soit à un sur-dimensionnement couteux, ou soit à une sous-estimation de la fiabilité, qui dépend dans la majorité des cas, de l’interaction entre le sol et la structure. A cet effet, il est indispensable de tenir compte de la variabilité des propriétés du sol qui peuvent largement influer sur le comportement des structures en béton armé vis-à-vis de l’état limite de portance. Dans cet article, on a développé une approche mécano-fiabiliste pour étudier l’effet de l’interaction sol-structure. La modélisation numérique de l'interaction sol-structure est mise en œuvre par un modèle mécanique de poutre en béton armé basé sur des appuis élastiques non linéaires. Les résultats obtenus mettent en évidence l'effet de l’interaction solstructure, et l'évolution de la probabilité de défaillance est liée d'une façon importante au non linéarités du comportement du sol.

%B 1st International Congress on Advances in Geotechnical Engineering and Construction Management ICAGECM’19 %P 97 %G eng %U https://www.researchgate.net/profile/Omri-Imen/publication/343112347_Volumel_international_congress_at_university_of_skikda/links/5f176e4545851515ef3e29e2/Volumel-international-congress-at-university-of-skikda.pdf#page=107 %0 Journal Article %J Para lá da tarefa: implicar os estudantes na aprendizagem de línguas estrangeiras no ensino superior. Porto: FLUP %D 2019 %T Apprentissage du FLE en Algérie: de l’analyse des représentations à la motivation des apprenants dans le milieu universitaire %A Khadraoui, Errime %A Messaour, Riad %X

La dynamique motivationnelle est-elle tributaire de l’évolution des représentations ? Quel rapport existe-t-il entre les représentations des étudiants vis-à-vis de la langue/culture française et l’apprentissage de celle-ci ? C’est à ces questions que la présente recherche tente de répondre. Pour cela, nous avons, dans un premier temps, réalisé à travers une enquête par questionnaire, une étude comparative entre les représentations qu’ont les étudiants de première année licence du département de français (Université de Batna 2) de la langue/culture française au début et en fin de l’année ; notre objectif étant d’examiner l’effet de l’évolution de leurs représentations sur leurs motivations. Afin d’appuyer les résultats obtenus de l’analyse des questionnaires, nous avons, dans un second temps, effectué des entretiens semi-directifs avec leurs enseignants. Au terme de cette étude, nous avons constaté une évolution de la motivation des étudiants qui s’explique par l’évolution de leurs représentations vis-à-vis de la langue/culture cible.

%B Para lá da tarefa: implicar os estudantes na aprendizagem de línguas estrangeiras no ensino superior. Porto: FLUP %P 208-225 %G eng %U https://ler.letras.up.pt/uploads/ficheiros/17861.pdf %0 Journal Article %J Multidim Syst Sign Process %D 2019 %T A Bayer pattern-based fragile watermarking scheme for color image tamper detection and restoration %A Noui, Lemnouar %A Belferdi, Wassila %A Behloul, Ali %B Multidim Syst Sign Process %V 30 %P 1093–1112 %G eng %0 Journal Article %J International Journal of Environment & Water %D 2019 %T Caractérisation géologique et apport de ressources hydriques dans le bassin d'Ain Djasser (Sud-Sétifien, Algérie NE) %A Djaiz, Fouad %A Nabil, Defaflia %A Ali, ATHAMENA %X

Le bassin d’Ain Djasser fait partie de l’ensemble Sud plaine inter- montagneuse appartenant au bassin des hauts plateaux caractérisé par un climat de type méditerranéen. L’hydrologie tributaire du relief est la conséquence directe des eaux d montre un domaine allochtone résultant d’une h atlasique et alpine. Ce dernier est caractérisé par des séries sédimentaires carbonatées colmaté par d'abondantes formations terrigènes. L’alimentation de l’eau souterraine des différentes nappes profondes à semi essentiellement de l’infiltration des eaux captive, par endroit recoupée par des forages à des profondeurs de 178 débit moyen de 15 l/s. L’interprétation des coupes géoélectriques du bassin montrent, (i) des formation du mio-plio-quaternaire de quelques dizaines de mètres qui forment un bon aquifère superficiel, (ii) des calcaires fissur variables est un aquifère captif. L’influence une éventuelle alimentation des aquifères entres eux. L’analyse litho le substratum et la couverture sédimentaire ne présentent pas de grandes variations latérale contre, nous observons au niveau des sondages une variation dans l’épaisseur et la lithologie des couches, essentiellement au niveau de la formation du remplissage L’objectif de cette étude réside pour l’essentiel, dans la mobilisation des r superficielles et souterraine pour leurs exploitations dans les domaines agricoles et vue d’une utilisation rationnelle et planifiée de cet élément vital qu’est l’eau.

%B International Journal of Environment & Water %V 8 %G eng %U https://www.researchgate.net/profile/Defaflia-Nabil/publication/335928254_Caracterisation_geologique_et_apport_de_la_geophysique_pour_la_mobilisation_des_ressources_hydriques_dans_le_bassin_d'Ain_Djasser_International_Journal_of_Environment_Water_Vol_Cara %N 3 %0 Journal Article %J Biodiversity Journa %D 2019 %T Characterization of gypsy moth Lymantria dispar (Linnaeus, 1758)(Lepidoptera Lymantriidae) eggs in Cork oak forests of the Kabylie region (Jijel-Algeria) %A Neffar, Fahima %A Rouahna, Leila %A Kerris, Tayeb %A Meradsi, Fouad %X

Algerian oak forests, extending over the entire northern littoral region, are attacked episodically by many defoliating Lepidoptera, of which Lymantria dispar (Linnaeus, 1758) (Lepidoptera Limantriidae) is the most widespread. In our study we aim to highlight the action of the changes of trophic factors on the dynamics of the population of Lymantria dispar through field inventory methods. Namely: the eggs counting by the line-transect method, picking of the eggs, control of eggs quality. Carried out on two stations in the Kabylie region (Jijel), in the forest of Béni Ider El M’sid (Taher) and that of the Ouled Djendjen Canton Boudouda (Texanna). The obtained results show that Texanna station is distinguished by a very high non-viable egg rate compared to Taher station, this is caused by the difference between the phenology of Lymantria dispar and the host tree which is affected in its foliage by various factors whose altitude is one of these factors

%B Biodiversity Journa %V 10 %P 569–576 %G eng %U https://doi.org/10.31396/Biodiv.Jour.2019.10.4.569.576 %N 4 %0 Journal Article %J MOJ Food Processing & Technology %D 2019 %T Convective Solar Drying of Spinach Leaves (Spinacia oleracea) %A Siabdallah, Nourelislam %A Ferhat, Radhia %A Lahbari, Miloud %A Fahloul, Djamel %X

The drying on of the means is usually used which allows the conservation of the food products by lowering of the activity of water. This paper presents the results of an experimental spinach (Spinacia oleracea) drying study in a new solar dryer. It is an indirect solar dryer with forced convection was developed and improved at the Food Science laboratory. Drying spinach leaves to a final moisture content of 2% from 93.2% (wet basis), with an air-drying speed equal to 1m/s. This study made it possible to determine the drying kinetics of spinach leaves, the evolution of the temperature profile and the influence of drying air recycling (0, 50 and 90%) on drying time. The curves of drying obtained show that the drying rate increased marginally with the increase in fraction of air recycled. It is reduced 3 to 4 hours, by increasing the fraction air recycled from 50 to 90 % respectively, with a significant profit of thermal energy. The drying temperature is higher and stable in the drying chamber of the order of 55 to 65°C (90% air recycled).

%B MOJ Food Processing & Technology %V 7 %G eng %U https://medcraveonline.com/MOJFPT/MOJFPT-07-00214.pdf %N 1 %0 Journal Article %J Revue Roumaine d’Études Francophones %D 2019 %T Didactisation du texte littéraire dans la formation des enseignants: de l’instrumentalisation à de nouvelles approches pédagogiques %A Amine, BELKACEM Mohammed %A MESSAOUR Riad %X

La présente étude vise à étudier le codage des pratiques linguistiques des jeunes issus de l'immigration algérienne en France. Notre objectif est de comprendre comment ces jeunes revendiquent leur appartenance socioculturelle et identitaire à travers l'utilisation du code-switching ? Comment la pratique du code-switching explique-t-elle leur double identité et leur identité socioculturelle ? Pour ce faire, nous avons, d'une part, réalisé une analyse lexicale d'un corpus de messages numériques écrits par ces jeunes, d'autre part, nous avons mené une enquête par questionnaire afin d'étudier leurs représentations. Les résultats obtenus ont montré que le code-switching permet aux jeunes issus de l'immigration algérienne non seulement de montrer leur particularisme mais aussi de revendiquer leur double identité socioculturelle et identitaire.

%B Revue Roumaine d’Études Francophones %G eng %0 Conference Proceedings %B The 2019 World Congress on Advances in Structural Engineering and Mechanics (ASEM19) , September 17 - 21, %D 2019 %T Dynamic analysis of a compressible soil of foundation reinforced by mixed-module columns (CMM) and stone columns %A Karech, Toufik %A Noui, Abdelkader %X

This work presents a numerical analysis of the dynamic behavior of reinforcements of liquefiable loose sand by flexible columns (stone columns) and Mixed Module Columns (CMM). In this study, the numerical simulation was carried out in 3D difference element analysis. Using a Finn model for dynamic Pore-Pressure Generation and the foundation subjected to the variable-amplitude harmonic ground motion of the Boumerdes earthquake (2003). When the height of the rigid part of the CMM has 50% of the column, the behavior of the improvement soil is the same by stone columns under the foundation, also the increase in the rigid part decreases the settlement. Overall, the high recorded accelerations by CMM indicate the largely preservation of the foundation stiffness

%B The 2019 World Congress on Advances in Structural Engineering and Mechanics (ASEM19) , September 17 - 21, %C Jeju Island, Korea %G eng %U http://www.i-asem.org/publication_conf/asem19/6.ES/XH5E.5.ES1357_5718F1.pdf %0 Journal Article %J Instrumentation Mesure Métrologie %D 2019 %T An Eddy Current Nondestructive Method for Crack Detection in Multilayer Riveted Structures An Eddy Current Nondestructive Method for Crack Detection in Multilayer Riveted Structures." %A Abdou, Abdelhak %A Safer, Omar Adib %A Bouchala, Tarik %A Bendaikha, Abdelmalik %A Abdelhadi, Bachir %A Guettafi, Amor %A Benoudjit, Azzedine %X

It is a challenging task to detect the hidden cracks in multilayer riveted structures in a nondestructive manner. This paper puts forward an eddy current nondestructive method for crack detection in such structures based on the electric conductivity of the rivets. Specifically, an eddy current sensor was designed with a ferrite core coil to evaluate the surface and inner defects of different layers. The magnetic phenomena during the detection process was simulated based on the magnetic potential and the scalar electrical potential, and the magnetic potential vector was solved by finite-element method. The proposed method was compared with the eddy current detection method without considering rivet conductivity through an experiment on a three-layer riveted aluminum structure. The length and position of each defect on each layer were changed in the experiment. The results show that the proposed method achieved better accuracy than the contrastive method, and its sensitivity depends on two issues: the position of the defect relative to the separation of the layers and the length of the defect relative to the length of the rivet head. The research results are of great significance for nondestructive testing of multilayer riveted structures in many fields.

%B Instrumentation Mesure Métrologie %V 18 %P 485-490 %8 1981 %G eng %U https://www.researchgate.net/profile/Safer-Omar-Adib/publication/337629600_An_Eddy_Current_Nondestructive_Method_for_Crack_Detection_in_Multilayer_Riveted_Structures/links/5e3964f992851c7f7f1a82e6/An-Eddy-Current-Nondestructive-Method-for-Crack-Detection- %N 5 %0 Journal Article %D 2019 %T Eddy Current Nondestructive Testing Calibration for Cracks Detection in Aircraft Based Riveted Multilayer Structures %A Abdou, Abdelhak %A Safer, Omar Adib %A Bouchala, Tarik %A Bendaikha, Abdelmalik %A Abdelhadi, Bachir %A Guettafi, Amor %A Benoudjit, Azzedine %X

Eddy Current Nondestructive Testing Calibration for Cracks Detection in Aircraft Based Riveted Multilayer Structures

%8 1979 %G eng %U https://www.researchgate.net/profile/Tarik-Bouchala/publication/337632656_Eddy_Current_Nondestructive_Testing_Calibration_for_Cracks_Detection_in_Aircraft_Based_Riveted_Multilayer_Structures/links/5de144f0a6fdcc2837f6bbdd/Eddy-Current-Nondestructive-Testi %0 Conference Proceedings %B 1st International Congress on Advances in Geotechnical Engineering and Construction Management ICAGECM’19 %D 2019 %T Effect of the initial soil suction on Structures Buried in an Expansive Soil during a Rainfall Infiltration Case of Aine-Tine pipeline %A Bouatia, Mohammed %A Demagh, Rafik %X

Shrink/Swell soil displacements are the source of additional loadings on expansive soil buried structures such as pipelines. One of the most important factors, which control the swelling values, is the initial soil suction. Using finite element analysis, this paper aims to estimate the effect of the initial soil suction on the loadings provoked by the consequences of a rainfall. An infiltration of 2mm/day intensity and which lasts for 30 days (1 months) on the pipeline buried within the clayey soil, with taking into account the unsaturated behavior of the soil of the Aine-Tine area (Mila, Algeria) is considered. Five initial values of soil suction (from -50kPa to -800kPa) with double increment are used. The obtained results confirm that, the higher the initial soil suction, the higher are the effects, whether on the pipeline internal axial forces or on the soil heave.

%B 1st International Congress on Advances in Geotechnical Engineering and Construction Management ICAGECM’19 %C Skikda - Algeria %P 122 %G eng %U https://www.researchgate.net/profile/Omri-Imen/publication/343112347_Volumel_international_congress_at_university_of_skikda/links/5f176e4545851515ef3e29e2/Volumel-international-congress-at-university-of-skikda.pdf#page=132 %0 Conference Proceedings %B ICEMAEP2019, October 22-24, %D 2019 %T Etude numérique de la convection naturelle dans une cavité avec chicane %A BENNIA, Abderazak %A NAOUI, Noui %A Samir RAHAL %A KHELIL, Ali %X

Dans ce travail, nous présentons une étude numérique de la convection naturelle dans une enceinte rectangulaire verticale sans ou avec chicane. Les équations qui régissent ce phénomène ont été résolues par une approche numérique, basée sur la méthode des volumes finis en utilisant le code Fluent et le mailleur Gambit. Un premier travail de validation a été mené en comparant notre travail avec ceuxd’autres auteurs. Par la suite, on a fait varier le fluide de travail, la longueur et la position de chicane. L’influence de ces paramètres sur les champs de température, la densité de flux de chaleur et le nombre de Nusselt a été ainsi considérée et les conditions optimales quimaximalisent les transferts de chaleur déterminée

%B ICEMAEP2019, October 22-24, %C Constantine, Algeria %G eng %U https://www.researchgate.net/profile/Abderazak-Bennia/publication/338221681_Etude_numerique_de_la_convection_naturelle_dans_une_cavite_avec_chicane/links/5e088e85a6fdcc2837463916/Etude-numerique-de-la-convection-naturelle-dans-une-cavite-avec-chicane.pdf %0 Conference Proceedings %B 1st International Congress on Advances in Geotechnical Engineering and Construction Management ICAGECM’19 ,9- 10 December, %D 2019 %T Évaluation de Modèles de Sol Constitutifs pour la Prévision des Mouvements Causés par une Excavation Profonde dans le Sable %A Moussa, A %A Salah, M %A Kamel, B %X

Cette communication présente des analyses numériques d’une excavation, dont l'objectif est d'évaluer les performances de trois modèles de sol constitutifs, à savoir le modèle de MohrCoulomb (modèle MC), le modèle hypoplastique avancé de von Wolffersdorff (modèle HP) et le modèle hypoplastique de von Wolffersdorff amélioré tenant compte de la faible raideur de la déformation (modèle HPS), pour simuler la performance du système de soutènement pour l'excavation de 20 m de profondeur de la fosse M1 adjacente à la station principale «Hauptbahnhof» à Berlin. La fosse M1 a été excavée sous l'eau et soutenue par une paroi moulée ancrée avec une seule rangée de tirants d’ancrages précontraints.Les résultats montrent que le modèle HPS est bien capable de retracer le comportement observé de la paroi moulée dans toutes les étapes de la construction.

%B 1st International Congress on Advances in Geotechnical Engineering and Construction Management ICAGECM’19 ,9- 10 December, %C Skikda-Algeria %P 25 %G eng %U https://www.researchgate.net/profile/Omri-Imen/publication/343112347_Volumel_international_congress_at_university_of_skikda/links/5f176e4545851515ef3e29e2/Volumel-international-congress-at-university-of-skikda.pdf#page=35 %0 Journal Article %J International Journal of Control, Energy and Electrical Engineering (CEEE) %D 2019 %T Impact of the secondary phase ZnS on CZTS performance solar cells %A Touafek, Naïma %A Mahamdi, Ramdane %A Dridi, Chahrazed %X

In the present study, ultra-thin layer ZnS is inserted in the structure of standard solar cell between CdS buffer layer and CZTS absorber layer to represent the Second Phase (SP) often forms on the top of CZTS. The impact of this layer on the performance of CZTS solar cells is illustrated by the diverse results obtained by simulation using SCAPS-1D. The formation of ZnS on the CZTS surface has harmful effects on the solar cells parameters where the conversion efficiency (η) decreases by 2%. When varying thickness of ZnS SP of 2% to 20% corresponding of the total absorber layer the efficiency decreases by about 0.65%. The ZnS SP can deteriorate the photovoltaic power conversion efficiency from 10.2% to levels of 8.8%, depending on the material buffer layer and the thickness of ZnS SP. Using the ZnS as buffer layer mitigates harmful effects of the ZnS secondary phase forms on the top of CZTS absorber layer.

%B International Journal of Control, Energy and Electrical Engineering (CEEE) %V 9 %P 6-9 %G eng %U https://d1wqtxts1xzle7.cloudfront.net/61623047/5720191228-92849-1bwxk6f-with-cover-page-v2.pdf?Expires=1650036764&Signature=G0zMNnJgprtdCwlTB-npbfs5Hy6tUuxJ8ZgBAVE2g23UxP4boVMS0Kz23kyzMce9ckdLcCLQPXgi2Hum8QcgzYqjZU7GEbIRukzAWW9bgnGX1eD7B5MRXkdY5vhvh9GK7gb %0 Conference Proceedings %B Challenges in Developing Sustainable Infrastructure %D 2019 %T Interference Effect of Nearby Strip Footings Resting on a Bilayer Granular Soil %A Boufarh, Rafik %A Abbeche, Khelifa %X

During the last decade, the construction sector in Algeria has been in constant development with higher demands for urban lands. This has resulted in placing building foundations in closer proximities with potential impact on the bearing capacity and settlements. Moreover, there have been limited investigations on the interference and overlapping effects on the ultimate bearing capacity of closely placed footings. This work explains the numerical investigation of the interference effect of juxtaposed strip footings based on a bilayer granular soil. A numerical model, based on the finite element method, was developed using Plaxis Package. The influence of spacing between foundations, friction angle, Young's modulus and thickness of the first layer on the efficiency factor ξγ were examined. The obtained results show clearly that the efficiency factor depends significantly on the thickness and strength of the first layer.

%B Challenges in Developing Sustainable Infrastructure %C Kuwait City, Kuwait %P 236 %G eng %U https://d1wqtxts1xzle7.cloudfront.net/62440781/Proceedings_CDSI_-_201920200322-94376-1ri1dgq-with-cover-page-v2.pdf?Expires=1650125906&Signature=FLCZy5-kLTAf4UpzBk61daInsXJlx~821UWW2ipmaan~rDsZUzeCtUfyVKyUJgvrECM8WawbVTA0YHVJhSNfvt-JauifpgogWv7R256di0dIjj %0 Journal Article %D 2019 %T La validité de l’évaluation sommative: étude des situations d’intégration du FLE au cycle moyen %A LAIDOUDI Assia %G eng %0 Journal Article %J Indian Geotechnical Journal %D 2019 %T A Numerical Investigation of Dynamic Behavior of a Unit Cell of a Loose sand Reinforced by Stone Column Under the Effect of Gravity Using Finn Model %A Noui, Abdelkader %A Karech, Toufik %A Tayeb Bouzid %X

A numerical simulation is presented to study loose sand improved by stone column (SC) to reduce potential of liquefaction by the drainage effect by this column. The proposed simulation aims to design a unit cell which is consisted of a column and its surrounding soil; it is modeled in 3D under a gravity load and is subjected dynamically to a sinusoidal load. A Finn model is considered for the sand to analyze the evolution of the excess pore water pressure (EPWP), and the column is modeled by the Mohr–Coulomb yield criterion. Parametric studies are included geometrically the effect of the diameter of the stone column and dynamically the effect of dynamic criterions of Finn model and the frequency content of the dynamic load. The numerical simulation of the unit cell gives interesting results in the dynamic behavior of a loose sand reinforced by stone column, and it is suggested for designing the mitigation of liquefaction of loose sand improved under the effect of gravity.

%B Indian Geotechnical Journal %V 49 %P 255–264 %G eng %U https://link.springer.com/article/10.1007/s40098-018-0326-2 %0 Journal Article %D 2019 %T Retentissement de la vitamine B12 sur l’anémie macrocytaire (anémie mégaloblastique) %A HANFER, Mourad %A MENIA, Hassiba %A DJEBABRA, Hedda %A DRIS, Ghania %G eng %0 Journal Article %D 2019 %T Self-stabilization on Scale-free Networks %A Badreddine Benreguia %A Hamouma Moumen %G eng %0 Journal Article %D 2019 %T Sensorless Speed Control of Induction Motor used Differential Flatness Theory %A Yassine, Beddiaf %A Fatiha, Zidani %A CHRIFI-ALAOUI, Larbi %G eng %0 Conference Proceedings %D 2019 %T Sliding Mode Control of Induction Motor Drive Applied in Photovoltaic-Pumping System %A Bouzeria, Hamza %A Fetha, Cherif %A Bahi, Tahar %A Abadlia, Issam %A Layate, Zakaria %A Lekhchine, Salima %G eng %0 Journal Article %D 2019 %T WAVELET FAMILIES COMPARISON FOR R-PEAKS DETECTION IN ELECTROCARDIOGRAM SIGNAL %A BELKACEM, SAMIA %A MESSAOUDI, NOUREDDINE %A Zohir Dibi %G eng %0 Journal Article %J International journal of environmental science and technology %D 2019 %T Assessment of wastewater asset management effectiveness in the case of rare data and low investments %A Bedjou, A %A Boudoukha, A %A Bosseler, B %B International journal of environmental science and technology %I Springer %V 16 %P 3781-3792 %@ 1735-2630 %G eng %N 7 %0 Journal Article %J Journal of Biological Research-Bollettino della Società Italiana di Biologia Sperimentale %D 2019 %T Safety evaluation and analgesic studies of defatted methanol extract of Capparis spinosa L.(Capparidaceae) fruits and roots bark in albino wistar rats %A Meddour, Asma %A Yahia, Mouloud %A Hambaba, Leila %B Journal of Biological Research-Bollettino della Società Italiana di Biologia Sperimentale %V 92 %@ 2284-0230 %G eng %N 1 %0 Journal Article %J Indian Journal of Science and Technology %D 2019 %T Multimodal face and iris recognition with adaptive score normalization using several comparative methods %A Mansoura, Lemmouchi %A Noureddine, Athamena %A Ouarda Assas %A Yassine, Abdessemed %B Indian Journal of Science and Technology %V 12 %P 7 %G eng %0 Journal Article %J Journal of Groundwater Science and Engineering %D 2019 %T Characterization of Continental Intercalaire aquifer (CI) in the Tinrhert-East area-Illizi Basin on the Algerian-Libyan Border. %A Belouanas, H %A Menani, MR %B Journal of Groundwater Science and Engineering %I Groundwater Science and Engineering Limited %V 7 %P 115-132 %@ 2305-7068 %G eng %N 2 %0 Journal Article %J International Journal of System Assurance Engineering and Management %D 2019 %T Super-twisting sliding mode control for brushless doubly fed induction generator based on WECS %A Moussa, Oussama %A Abdessemed, Rachid %A Said Benaggoune %B International Journal of System Assurance Engineering and Management %I Springer %V 10 %P 1145-1157 %@ 0976-4348 %G eng %N 5 %0 Journal Article %J UPB Sci. Bull. Ser. C %D 2019 %T Direct torque control (DTC-SVM) of PMSG based in wind energy conversion system %A Bensaadi, Hacene %A Harbouche, Youcef %A Abdessmed, Rachid %B UPB Sci. Bull. Ser. C %V 81 %P 227-240 %G eng %N 2 %0 Journal Article %J Pattern Recognition and Image Analysis %D 2019 %T An efficient human activity recognition technique based on deep learning %A Aziz Khelalef %A Fakhreddine Ababsa %A Nabil Benoudjit %B Pattern Recognition and Image Analysis %I Springer %V 29 %P 702-715 %@ 1555-6212 %G eng %N 4 %0 Journal Article %J Acta Biochimica Polonica %D 2019 %T Epigenetic modifiers 5-aza-2′-deoxycytidine and valproic acid differentially change viability, DNA damage and gene expression in metastatic and non-metastatic colon cancer cell lines %A Ghecham, Abdelmoudjib %A Senator, Abderrahmane %A Pawlowska, Elzbieta %A Bouafia, Wafa %A Błasiak, Janusz %B Acta Biochimica Polonica %V 66 %P 355-360 %@ 1734-154X %G eng %N 3 %0 Journal Article %J Journal of nano-and electronic physics %D 2019 %T New Deconvolution Technique to Improve the Depth Resolution in Secondary Ion Mass Spectrometry %A Dahraoui, N %A Boulakroune, M %A Benatia, D %B Journal of nano-and electronic physics %I Сумський державний університет %P 02021-1-02021-5 %@ 2077-6772 %G eng %N 11, no. 2 %0 Thesis %D 2019 %T Le rôle de l’intonation dans la compréhension d’un message écrit en français chez les étudiants LMD-Cas de la première et troisième années-Licence Français %A AZZOUZI, TAREK %I Université de Batna 2 %G eng %0 Journal Article %J Applied Physics A %D 2019 %T Temperature and SiO 2/4H-SiC interface trap effects on the electrical characteristics of low breakdown voltage MOSFETs %A Bencherif, H %A Dehimi, L %A Pezzimenti, F %A Della Corte, FG %B Applied Physics A %I Springer %V 125 %P 294 %@ 0947-8396 %G eng %N 5 %0 Journal Article %J International Journal of Geotechnical Engineering %D 2019 %T Model experiments to assess effect of eccentric loading on the ultimate bearing capacity of a strip footing near a dry sand slope %A Mazouz, Badis %A Abbeche, Khelifa %A Abdi, Abdelmadjid %A Baazouzi, Messaoud %B International Journal of Geotechnical Engineering %I Taylor & Francis %P 1-11 %@ 1938-6362 %G eng %0 Journal Article %J Computational Thermal Sciences: An International Journal %D 2019 %T Effects of discrete controllers on the stabilization of natural convection induced by internal heat generation in a shallow cavity %A Mebrouki, A %A Zineddine, Alloui %A Vasseur, Patrick %B Computational Thermal Sciences: An International Journal %I Begel House Inc. %V 11 %@ 1940-2503 %G eng %N 5 %0 Journal Article %J International Journal of Quality & Reliability Management %D 2019 %T Decision making under uncertainty in the alarm systems response %A Mohammed, Antar Si %A Smail, Rachid %A Chebila, Mourad %B International Journal of Quality & Reliability Management %I Emerald Publishing Limited %@ 0265-671X %G eng %0 Journal Article %J Smart and Sustainable Built Environment %D 2019 %T A design approach towards sustainable buildings in Algeria %A Rahmouni, Sofiane %A Smail, Rachid %B Smart and Sustainable Built Environment %I Emerald Publishing Limited %@ 2046-6099 %G eng