@proceedings {62575,
	title = {Backstepping Approach Based on Direct Power Control of a DFIG in WECS},
	journal = {2021 10th International Conference on Renewable Energy Research and Application (ICRERA)},
	year = {2021},
	month = {2021},
	pages = {198-202},
	publisher = {IEEE},
	address = {Istanbul, Turkey},
	abstract = {
	This work deals with the study and performance improvement of the direct power control of DFIG based on backstepping Controller. Direct power control using hysteresis regulator has certain disadvantages such as significant powers ripples, variable switching frequency and sensitivity to parametric variations. To surmount these disadvantages, we present a robust controller such as the backstepping-based direct power control using SVM. A comparison study was made between the classic direct power control and the backstepping controller. The simulation results show that the backstepping controller provides good results reduces powers ripples.

},
	isbn = {1-66544-524-6},
	url = {https://ieeexplore.ieee.org/abstract/document/9598599},
	author = {Mazouz, Farida and Sebti Belkacem and Ghoulemallah Boukhalfa and Colak, Ilhami}
}
@article {62574,
	title = {DPC-SVM of DFIG Using Fuzzy Second Order Sliding Mode Approach},
	journal = {International Journal of Smart Grid-ijSmartGrid},
	volume = {5},
	number = {4},
	year = {2021},
	month = {2021},
	pages = {174-182},
	abstract = {
	The direct control power (DPC) of the of the double feed induction generator (DFIG) using conventional controllers based on PI regulators is characterized by poor results: Robustness properties are not guaranteed in the face of parametric uncertainties and strong ripple of the powers. From the best evoked control techniques presented in this field to overcome these drawbacks, we will study some improvement variants such as the use of The second order sliding mode control (SOSMC) developed on the basis of the super twisting torsion algorithm (STA) associated with the fuzzy logic control to obtain (FSOSMC) in order to obtain acceptable performance. Finally, the effectiveness of the planned control system is studied using Matlab/Simulink. The proposed method that not only reduces power ripples, but also improves driving dynamics by making it less sensitive to parameter uncertainty.

},
	isbn = {2602-439X},
	url = {https://www.ijsmartgrid.org/index.php/ijsmartgridnew/article/view/219},
	author = {Mazouz, Farida and Sebti Belkacem and Colak, Ilhami}
}
@article {62687,
	title = {Dual direct torque control of doubly fed induction machine using second order sliding mode control},
	journal = {Journal of Measurements in Engineering},
	volume = {9},
	number = {1},
	year = {2021},
	month = {2021},
	pages = {1-12},
	abstract = {
	In this paper a dual direct torque control (DDTC) strategy with second-order sliding mode control (SOSMC) controller of the doubly fed Induction motor (DFIM) is presented in order to overcome some drawback such as ripples in torque, flux and to improve dual direct torque control (DDTC) performance toward the electrical parameters variations. This control strategy used in the doubly fed induction machine supplied, coupled by two voltage source inverters in rotor and stator sides witches are linked to two switching tables in order to determined the rotor and stator flux vector control. This controller based on super-twisting algorithm (STA). Comparative results between a classical controller (PI) and the proposed controller can prove the very satisfactory performance and robustness of this new controller.



	



	\&nbsp;

},
	isbn = {2335-2124},
	url = {https://www.extrica.com/article/21432},
	author = {Boumaraf, Farid and BOUTABBA, Tarek and Sebti Belkacem}
}
@article {62652,
	title = {Fuzzy super twisting algorithm dual direct torque control of doubly fed induction machine},
	journal = {International Journal of Electrical and Computer Engineering (IJECE)},
	volume = {11},
	year = {2021},
	month = {2021},
	pages = {3782-3790},
	abstract = {
	This paper proposes the fundamental aspects of hybrid nonlinear control which is composed of the super twisting algorithm (STA) based second order sliding mode control applying fuzzy logic method (FSOSMC), with pertinent simulation results for a doubly fed induction machine (DFIM) drive. To minimize chattering effect phenomenon due to Signum function employed in sliding mode algorithm, a new method is proposed. This technique consists in replacing the signum function by fuzzy switching function in the SOSMC to minimize flux and torque ripples. This FSOSMC is associated to the double direct torque control DDTC of the doubly fed induction machine (DFIM) by combining the advantages of fuzzy logic (FL) and the advantages of super-twisting sliding mode. The FSOSMC-DDTC strategy is compared with a PI-DDTC and SOSMC-DDTC. Simulation results demonstrate good efficiency and excellent robustness of the hybrid nonlinear controller.

},
	url = {https://ijece.iaescore.com/index.php/IJECE/article/view/25244},
	author = {Boumaraf, Farid and BOUTABBA, Tarek and Sebti Belkacem}
}
@article {62576,
	title = {Super Twisting Algorithm Direct Power Control of DFIG Using Space Vector Modulation},
	year = {2021},
	month = {2021},
	author = {Mazouz, Farida and Sebti Belkacem}
}
@article {7069,
	title = {Hybrid Fuzzy Reference Signal Tracking Control of a Doubly Fed Induction Generator},
	journal = {International Journal of Engineering (IJE)},
	volume = {33},
	number = {4},
	year = {2020},
	pages = {567-574},
	abstract = {This paper presents a hybrid scheme for the control of active and reactive powers using the direct vector control with stator flux orientation (SFO) of the DFIG. The hybrid scheme consists of Fuzzy logic, Reference Signal Tracking (F-RST) controllers. The proposed (F-RST) controller is compared with the classical Proportional-Integral (PI) and the Polynomial (RST) based on the pole placement theory. The various strategies are analyzed and compared in terms of tracking, robustness, and sensitivity to the speed variation. Simulations are done using MATLAB software. The simulation results prove that the proposed approach leads to good performances such as the tracking test, the rejection of disturbances and the robustness concerning the parameter variations. The hybrid controller is much more efficient compared to those of PI and RST controller, it also improves the performance of the powers and ensures some important strength despite the parameter variation of the DFIG.},
	url = {https://www.ije.ir/article_106029.html},
	author = {N. Choug and Said Benaggoune and Sebti Belkacem}
}
@article {7073,
	title = {Neuro-fuzzy Sliding Mode Controller Based on a Brushless Doubly Fed Induction Generator},
	journal = {IJE TRANSACTIONS B: Applications},
	volume = {33},
	number = {2},
	year = {2020},
	pages = {248-256},
	abstract = {The combination of neural networks and fuzzy controllers is considered as the most efficient approach for different functions approximation, and indicates their ability to control nonlinear dynamical systems. This paper presents a hybrid control strategy called Neuro-Fuzzy Sliding Mode Control (NFSMC) based on the Brushless Doubly fed Induction Generator (BDFIG). This replaces the sliding surface of the control to exclude chattering phenomenon caused by the discontinuous control action. This technique offers attractive features, such as robustness to parameter variations. Simulations results of 2.5 KW BDFIG have been presented to validate the effectiveness and robustness of the proposed approach in the presence of uncertainties with respect to vector control (VC) and sliding mode control (SMC). We compare the static and dynamic characteristics of the three control techniques under the same operating conditions and in the same simulation configuration. The proposed controller schemes (NFSMC) are effective in reducing the ripple of active and reactive powers, effectively suppress sliding-mode chattering and the effects of parametric uncertainties not affecting system performance.},
	url = {https://www.ije.ir/article_103373.html},
	author = {Ouada, L and Benaggounea, Said and Sebti Belkacem}
}
@article {63094,
	title = {Direct torque control of dual star induction motor using a fuzzy-PSO hybrid approach},
	journal = {Applied Computing and InformaticsApplied Computing and Informatics},
	year = {2020},
	month = {2020},
	isbn = {2210-8327},
	author = {Ghoulemallah Boukhalfa and Sebti Belkacem and Abdesselem Chikhi and Said Benaggoune}
}
@article {63086,
	title = {Evaluation of the High Performance Indirect Field Oriented Controlled Dual Induction Motor Drive Fed by a Single Inverter using Type-2 Fuzzy Logic Control},
	journal = {Engineering, Technology \& Applied Science ResearchEngineering, Technology \& Applied Science Research},
	volume = {10},
	year = {2020},
	month = {2020},
	pages = {6301-6308},
	isbn = {1792-8036},
	author = {Bounab, Alaeddine and Chaiba, Azeddine and Sebti Belkacem}
}
@article {45238,
	title = {Adaptive direct power control for double fed induction generator used in wind turbine},
	journal = {International Journal of Electrical Power \& Energy Systems},
	volume = {114},
	year = {2020},
	pages = {105395},
	publisher = {Elsevier},
	abstract = {
	This papers deal with a new Adaptive Direct Power Control for Doubly-Fed Induction Generator of 1.5 MW. The main feature of the proposed strategy is based on the replacement of the fixed switching table by an adaptive one. The online update of the adaptive switching table depends on the reactive power variation and past switching sequences. The proposed adaptive direct power control is compared with Vector Control and Classical Direct Power Control. The robustness of the proposed control scheme against parameter, load and wind speed variations have done with success. The main performance of the Adaptive Direct Power Control strategy is the reduction of powers ripples, thus reduce of torque ripple on the shaft of the\&nbsp;turbine.

},
	isbn = {0142-0615},
	url = {https://www.sciencedirect.com/science/article/abs/pii/S0142061518326395},
	author = {Mazouz, Farida and Sebti Belkacem and Colak, Ilhami and Said Drid and Harbouche, Youcef}
}
@article {45235,
	title = {Direct torque control of dual star induction motor using a fuzzy-PSO hybrid approach},
	journal = {Applied Computing and Informatics},
	year = {2020},
	publisher = {Emerald Publishing Limited},
	abstract = {
	This paper presents the particle swarm optimization (PSO) algorithm in conjuction with the fuzzy logic method in order to achieve an optimized tuning of a proportional integral derivative controller (PID) in the DTC control loops of dual star induction motor (DSIM). The fuzzy controller is insensitive to parametric variations, however, with the PSO-based optimization approach we obtain a judicious choice of the gains to make the system more robust. According to Matlab simulation, the results demonstrate that the hybrid DTC of DSIM improves the speed loop response, ensures the system stability, reduces the steady state error and enhances the rising time. Moreover, with this controller, the disturbances do not affect the motor performances.

},
	isbn = {2634-1964},
	url = {https://www.emerald.com/insight/content/doi/10.1016/j.aci.2018.09.001/full/html?utm_source=rss\&utm_medium=feed\&utm_campaign=rss_journalLatest},
	author = {Ghoulemallah Boukhalfa and Sebti Belkacem and Abdesselem Chikhi and Said Benaggoune}
}
@article {4745,
	title = {Design of Robust Control using Fuzzy Logic Controller for Doubly Frd Induction Motor Drives, ISSN / e-ISSN 1454 / 234X},
	journal = {UPB Scientific Bulletin, Series A: Applied Mathematics and Physics},
	volume = {volume 81},
	number = {issue 1},
	year = {2019},
	abstract = {This paper presents a fuzzy logic controller destined to the doubly-fed induction motor (DFIM) speed controlling. It solves the problems associated with the conventional IP (Integral Proportional) controller. This fuzzy logic controller is based on the decoupling control to enhance robustness under different operating conditions such as load torque and in the presence of parameters variation. The simulation results for various scenarios show the high performances of the proposed control in terms of piloting effectiveness, precision, rapidity and stability for the high powers DFIM operating at variable speeds.},
	url = {https://www.researchgate.net/publication/332232682_DESIGN_OF_ROBUST_CONTROL_USING_FUZZY_LOGIC_CONTROLLER_FOR_DOUBLY-FED_INDUCTION_MOTOR_DRIVES},
	author = {Zidani Mohamed Yazid and Youb Lamia and Sebti Belkacem and Farid, Naceri}
}
@article {63499,
	title = {Application of fuzzy PID controller based on genetic algorithm and particle Swarm optimization in direct torque control of double star induction motor},
	journal = {J. Cent. South UnivJ. Cent. South Univ},
	volume = {26},
	year = {2019},
	month = {2019},
	pages = {1886-1896},
	author = {Ghoulemallah Boukhalfa and Sebti Belkacem and Abdesselem Chikhi and Said Benaggoune}
}
@article {63178,
	title = {Design of robust control using fuzzy logic controller for doubly fed-induction motor drives},
	journal = {UPB Sci. BullUPB Sci. Bull},
	volume = {81},
	year = {2019},
	month = {2019},
	pages = {159-170},
	author = {Zidani, Mohamed Yazid and Youb, Lamia and Sebti Belkacem and Naceri, Farid}
}
@proceedings {63359,
	title = {Direct torque control using fuzzy second order sliding mode speed regulator of double star permanent magnet synchronous machine},
	journal = {International Conference on Electrical Engineering and Control Applications},
	year = {2019},
	month = {2019},
	pages = {139-153},
	publisher = {Springer},
	author = {Laggoun, Louanasse and Kiyyour, Brahim and Ghoulemallah Boukhalfa and Sebti Belkacem and Said Benaggoune}
}
@article {63500,
	title = {Genetic algorithm and particle swarm optimization tuned fuzzy PID controller on direct torque control of dual star induction motor},
	journal = {Journal of Central South UniversityJournal of Central South University},
	volume = {26},
	year = {2019},
	month = {2019},
	pages = {1886-1896},
	isbn = {2227-5223},
	author = {Ghoulemallah Boukhalfa and Sebti Belkacem and Abdesselem Chikhi and Said Benaggoune}
}
@proceedings {63522,
	title = {Multi-Level Direct Torque Control of Induction Motor Using Fuzzy-Genetic Speed Regulation},
	journal = {2019 International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET)},
	year = {2019},
	month = {2019},
	pages = {1-5},
	publisher = {IEEE},
	isbn = {1-72812-301-1},
	author = {Fouzia Benmessaoud and Abdesselem Chikhi and Sebti Belkacem and Ghoulemallah Boukhalfa}
}
@article {65032,
	title = {Applied Computing and Informatics},
	journal = {methodsmethods},
	volume = {36},
	year = {2018},
	month = {2018},
	pages = {37},
	author = {Ghoulemallah Boukhalfa and Sebti Belkacem and Abdesselem Chikhi and Said Benaggoune}
}
@proceedings {65102,
	title = {Comparative Study of DTC and Predictive Torque Control of Induction Machine},
	journal = {IEEE-2018 International Conference on Control, Automation and Diagnosis (ICCAD{\textquoteright}18) March 19-21,},
	year = {2018},
	month = {2018},
	address = {Marrakech, Morocco.},
	abstract = {
	In order to illustrate the criteria relating to static and dynamic performance, complexity of design, implementation and decoupling, a comparison was made between two asynchronous machine control techniques which are the direct torque control under the base of the SVM (DTC-SVM) and the predictive torque control (MPDTC). The results show the merits of these two control strategies with respect to the variations of the load setpoint for the torque and its influence on the speed and were obtained using a simulation program under the environment Matlab / Simulink

},
	author = {Sebti Belkacem and Fouzia Benmessaoud and Abdesselem Chikhi and Djaghdali, Lakhdar}
}
@article {64620,
	title = {Design of an Adaptive Fuzzy Control System for Dual Star Induction Motor Drives},
	journal = {Advances in Electrical and Computer EngineeringAdvances in Electrical and Computer Engineering},
	volume = {18},
	year = {2018},
	month = {2018},
	author = {Youb, Lamia and Sebti Belkacem and Naceri, Farid and Cernat, Mihai and Pesquer, Luis Guasch}
}
@article {64838,
	title = {Direct Power Control of DFIG by Sliding Mode Control and Space Vector Modulation},
	journal = {7th International conference on system and control, IEEE (ICSC), Valencia {\textendash} Spain, October, 24-267th International conference on system and control, IEEE (ICSC), Valencia {\textendash} Spain, October, 24-26},
	year = {2018},
	month = {2018},
	author = {Mazouz, F. and Sebti Belkacem and Colak, I. and Said Drid}
}
@article {65033,
	title = {Direct torque control of dual star induction motor using a fuzzy-PSO hybrid approach},
	journal = {Applied Computing and InformaticsApplied Computing and Informatics},
	year = {2018},
	month = {2018},
	abstract = {This paper presents the particle swarm optimization (PSO) algorithm in conjuction with the fuzzy logic method in order to achieve an optimized tuning of a proportional integral derivative controller (PID) in the DTC control loops of dual star induction motor (DSIM). The fuzzy controller is insensitive to parametric variations, however, with the PSO-based optimization approach we obtain a judicious choice of the gains to make the system more robust. According to Matlab simulation, the results demonstrate that the hybrid DTC of DSIM improves the speed loop response, ensures the system stability, reduces the steady state error and enhances the rising time. Moreover, with this controller, the disturbances do not affect the motor performances.},
	author = {Ghoulemallah Boukhalfa and Sebti Belkacem and Abdesselem Chikhi and Said Benaggoune}
}
@article {64856,
	title = {Direct torque control using second order sliding mode of a double star permanent magnet synchronous machine},
	journal = {U.P.B. Sci. Bull, Series CU.P.B. Sci. Bull, Series C},
	volume = {79},
	year = {2018},
	month = {2018},
	author = {LAGGOUN, L. and Youb, Lamia and Sebti Belkacem and Said Benaggoune and CRACIUNESCU, A.}
}
@proceedings {64732,
	title = {A Fuzzy Adaptive Control of Doubly Fed Induction Machine (DFIM)},
	journal = {3rd International Conference on Measurement Instrumentation and Electronics (ICMIE 2018)},
	year = {2018},
	month = {2018},
	abstract = {
	In this paper, we are interested in the adaptive fuzzy control a technique has been studied and applied, namely adaptive fuzzy control based on theory of Lyapunov. The system based on the stability theory is used to approximate the gains Ke and kdce to ensure the stability of the control in real time .the simulations results obtained by using Matlab environment gives that the fuzzy adaptive control more robust, also it has superior dynamics performances. The results and test of robustness will be presented.

},
	url = {https://www.matec-conferences.org/articles/matecconf/abs/2018/67/matecconf_icmie2018_03008/matecconf_icmie2018_03008.html},
	author = {A. Saidi and Youb, Lamia and Naceri, Farid and Sebti Belkacem}
}
@proceedings {64731,
	title = {A Fuzzy Adaptive Control of Doubly Fed Induction Machine (DFIM)},
	journal = {MATEC Web of Conferences},
	volume = {208},
	year = {2018},
	month = {2018},
	pages = {03008},
	publisher = {EDP Sciences},
	isbn = {2261-236X},
	author = {Saidi, A and Youb, Lamia and Naceri, Farid and Sebti Belkacem}
}
@proceedings {65077,
	title = {Fuzzy Compensator of the Stator Resistance Variation of the DTC Driven Induction Motor Using Space Vector Modulation},
	journal = { International Conference on Advanced Intelligent Systems and Informatics  AISI 2018},
	year = {2018},
	month = {2018},
	abstract = {
	This paper presents the contribution of a fuzzy controller to compensate the influence of stator resistance variation which can degrade the performance and stability of a direct torque control (DTC). Nevertheless, the original term DTC refers to a strategy that provides good performance, but it also has some negative aspects to the level of switching and inaccuracy in the engine model which recommends the use of a new technique the SVM which proposes an algorithm based on the modulation of the space vector in order to carry out a predictive regulation of the torque and flux of the induction motor and provides a fixed switching frequency, thus improving the dynamic response and the static behavior of the DTC.

},
	url = {https://link.springer.com/chapter/10.1007/978-3-319-99010-1_8},
	author = {Fouzia Benmessaoud and Abdesselem Chikhi and Sebti Belkacem}
}
@proceedings {65076,
	title = {Fuzzy Compensator of the Stator Resistance Variation of the DTC Driven Induction Motor Using Space Vector Modulation},
	journal = {International Conference on Advanced Intelligent Systems and Informatics},
	year = {2018},
	month = {2018},
	pages = {89-97},
	publisher = {Springer},
	author = {Fouzia Benmessaoud and Abdesselem Chikhi and Sebti Belkacem}
}
@inbook {65078,
	title = {Fuzzy Compensator of the Stator Resistance Variation of the DTC Driven Induction Motor Using Space Vector Modulation},
	booktitle = {Advances in Intelligent Systems and Computing},
	volume = {845},
	year = {2018},
	month = {2018},
	publisher = {{\textcopyright} Springer Nature Switzerland AG 2019, ISBN: 978-3-319-99009-5},
	organization = {{\textcopyright} Springer Nature Switzerland AG 2019, ISBN: 978-3-319-99009-5},
	author = {Fouzia Benmessaoud and Abdesselem Chikhi and Sebti Belkacem}
}
@inbook {64836,
	title = {Fuzzy control of a wind system based on the DFIG},
	booktitle = {Artificial Intelligence in Renewable Energetic Systems},
	volume = {35},
	year = {2018},
	month = {2018},
	publisher = {{\textcopyright} Springer International Publishing AG 2018, ISBN: 978-3-319-73191-9},
	organization = {{\textcopyright} Springer International Publishing AG 2018, ISBN: 978-3-319-73191-9},
	author = {Mazouz, Farida and Sebti Belkacem and Sabir Ouchen and Harbouche, Y. and Abdessemed, Rachid}
}
@article {64269,
	title = {Active and Reactive Power Control of a DFIG For Variable Speed Wind Energy Conversion},
	journal = {6th International conference on system and control, IEEE, (ICSC), Batna-Algeria, May, 7-96th International conference on system and control, IEEE, (ICSC), Batna-Algeria, May, 7-9},
	year = {2017},
	month = {2017},
	author = {Mazouz, F. and Sebti Belkacem and Harbouche, Y. and Abdessemed, Rachid and Sabir Ouchen}
}
@proceedings {64268,
	title = {Active and reactive power control of a DFIG for variable speed wind energy conversion},
	journal = {6th International Conference on Systems and Control (ICSC)},
	year = {2017},
	month = {2017},
	address = { Batna, Algeria},
	abstract = {
	In this paper, we propose a vector control of a doubly fed induction generator (DFIG) for variable speed wind power generation. The model is developed based on the dual powered generator for the control of the active and reactive powers. Several studies are carried out to test their operation under different wind conditions. The results have shown good performances of the wind energy converter system operate under wind variations with indirect vector control strategies.

},
	url = {https://ieeexplore.ieee.org/abstract/document/7958642},
	author = {Mazouz, Farida and Sebti Belkacem and Harbouche, Y. and Abdessemed, Rachid and Sabir Ouchen}
}
@article {64511,
	title = {Direct torque control of a doubly fed induction generator},
	journal = {International Journal of Energetica (IJECA)International Journal of Energetica (IJECA)},
	volume = {2},
	year = {2017},
	month = {2017},
	author = {BEN-AMAR, Asma and Sebti Belkacem and Mahni, T.}
}
@proceedings {64265,
	title = {Fuzzy control of a wind system based on the DFIG},
	journal = {International Conference in Artificial Intelligence in Renewable Energetic Systems},
	year = {2017},
	month = {2017},
	pages = {173-181},
	publisher = {Springer},
	author = {Mazouz, Farida and Sebti Belkacem and Sabir Ouchen and Harbouche, Youcef and Abdessemed, Rachid}
}
@article {64267,
	title = {Fuzzy control of a wind system based on the DFIG},
	journal = {International Conference on Artificial Intelligence in Renewable Energetic Systems (IC-AIRES), Tipaza, Algeria, October 22-24International Conference on Artificial Intelligence in Renewable Energetic Systems (IC-AIRES), Tipaza, Algeria, October 22-24},
	year = {2017},
	month = {2017},
	author = {Mazouz, F. and Sebti Belkacem and Harbouche, Y. and Sabir Ouchen and Abdessemed, Rachid}
}
@proceedings {64266,
	title = {Maintenance and Security of the WECS- Case of Blade Conversion Sub-System Control},
	journal = { 3 rd International Conference on Power Electronics and their Applications},
	year = {2017},
	month = {2017},
	address = {Djelfa, Algeria},
	abstract = {
	This article presents the foundations of maintenance and its different types, the level of intervention, the safety of work and devices of the wind systems, and also the types of risks that can occur during the control by blades orientation. The system under consideration is based on a wound rotor asynchronous machine excited through the rotor by means of a bidirectional converter. Control is ensured by the integration of PI. From this study, recommendations are made and simulation results are presented and discussed

},
	url = {https://www.researchgate.net/publication/320931422_Maintenance_and_Security_of_the_WECS-Case_of_Blade_Conversion_Sub-System_Control},
	author = {Mazouz, F. and Sebti Belkacem and Harbouche, Y. and Sabir Ouchen and Abdessemed, Rachid}
}
@article {65503,
	title = {Reducing of torque and flux ripples in DTC of IM based on predictive control},
	journal = {JOURNAL OF ELECTRICAL ENGINEERINGJOURNAL OF ELECTRICAL ENGINEERING},
	volume = {16},
	year = {2016},
	month = {2016},
	author = {Djaghdali, Lakhdar and Sebti Belkacem and Naceri, Farid}
}
@article {65971,
	title = {Direct Torque Control of Doubly Fed Induction Machine},
	journal = {International Journal on electrical engineering and informaticsInternational Journal on Electrical Engineering and Informatics},
	volume = {7},
	year = {2015},
	month = {2015},
	author = {Boumaraf, Farid and Bendaas, Mohamed-Lokmane and Abdessemed, Rachid and Sebti Belkacem}
}
@article {65972,
	title = {Dual Direct Torque Control of Doubly Fed Induction Machine},
	journal = {International Journal on Electrical Engineering and Informatics, SeptemberInternational Journal on Electrical Engineering and Informatics, September},
	volume = {7},
	year = {2015},
	month = {2015},
	author = {Boumaraf, Farid and Bendaas, Mohamed-Lokmane and Abdessemed, Rachid and Sebti Belkacem}
}
@article {65939,
	title = {A NOVEL DTC-SVM ASSOCIATED WITH THE CALCULATION OF PI REGULATOR OF THE INDUCTION MACHINE},
	journal = {Asian Journal of Science and Technology, AprilAsian Journal of Science and Technology, April},
	volume = {6},
	year = {2015},
	month = {2015},
	pages = {1241-1247},
	author = {Djaghdali, Lakhdar and Naceri, Farid and Sebti Belkacem}
}
@article {65780,
	title = {A Robust Hybrid Control for Voltage-Fed Induction Motor Drives based on The Artificial Intelligence Techniques},
	journal = {International Journal of Hybrid Information TechnologyInternational Journal of Hybrid Information Technology},
	volume = {8},
	year = {2015},
	month = {2015},
	pages = {85-96},
	author = {Ramdane, Amel and Naceri, Farid and Sebti Belkacem}
}
@article {65841,
	title = {The stable algorithm based on a model reference adaptive control for the dual star induction machine drives},
	journal = {JOURNAL OF ELECTRICAL ENGINEERINGJOURNAL OF ELECTRICAL ENGINEERING},
	volume = {15},
	year = {2015},
	month = {2015},
	author = {Laamayad, Tahar and Sebti Belkacem}
}
@article {66340,
	title = {Comparison of the Performance Speed of the Induction Motor Drives by the Predictive Control and PI Regulator, Using Space Vector Modulation},
	journal = {Journal of Advanced Research in Science and TechnologyJournal of Advanced Research in Science and Technology},
	volume = {1},
	year = {2014},
	month = {2014},
	pages = {107-119},
	isbn = {2588-2511},
	author = {Djaghdali, Lakhdar and Naceri, Farid and Sebti Belkacem}
}
@book {66342,
	title = {Contribution the Predictive Control on the Minimization of the chattering the Torque and the Stator Flux of the Induction Machine},
	year = {2014},
	month = {2014},
	author = {Djaghdali, Lakhdar and Sebti Belkacem and Naceri, Farid}
}
@book {66401,
	title = {Design of Hybrid Controller by Fuzzy Sliding Mode for an Induction Motor},
	year = {2014},
	month = {2014},
	author = {Bendaas, Ismail and Sebti Belkacem}
}
@article {66400,
	title = {Improving Asynchronous Motor Speed and Flux Loop Control by Using Hybrid Fuzzy-SMC Controllers},
	journal = {International Journal of Automation and ComputingInternational Journal of Automation and Computing},
	volume = {11},
	year = {2014},
	month = {2014},
	pages = {361-367},
	author = {Bendaas, Ismail and F. Naceri and Sebti Belkacem}
}
@book {66341,
	title = {Performance Evaluation of Model Predictive Direct Torque Control of Induction Machine Based on input-output linearization},
	year = {2014},
	month = {2014},
	author = {Djaghdali, Lakhdar and Sebti Belkacem and Naceri, Farid}
}
@book {66630,
	title = {A Fuzzy Adaptive Control for Double Stator Induction Motor Drives},
	year = {2013},
	month = {2013},
	author = {Laamayad, Tahar and Nacer, Farid and Abdessemed, Rachid and Sebti Belkacem}
}
@article {66628,
	title = {A fuzzy sliding mode strategy for control of the dual star induction machine},
	journal = {JOURNAL OF ELECTRICAL ENGINEERINGJOURNAL OF ELECTRICAL ENGINEERING},
	volume = {13},
	year = {2013},
	month = {2013},
	author = {Laamayad, Tahar and F. Naceri and Sebti Belkacem}
}
@book {66761,
	title = {Modified Direct Torque and Flux Control for IM Drive},
	year = {2013},
	month = {2013},
	author = {Sebti Belkacem and Naceri, Farid}
}
@article {66737,
	title = {Torque Ripple Minimization of Dual Direct Torque Control of Doubly Fed Induction Machine Using Fuzzy Logic},
	journal = {JOURNAL OF ELECTRICAL ENGINEERINGJOURNAL OF ELECTRICAL ENGINEERING},
	volume = {13},
	year = {2013},
	month = {2013},
	author = {Boumaraf, Farid and Khettache, L. and Sebti Belkacem}
}
@article {66736,
	title = {Torque ripple minimization of dual direct torque control of doubly fed induction machine using fyzzy logic},
	journal = {JEEJEE},
	volume = {13},
	year = {2013},
	month = {2013},
	author = {Boumaraf, Farid and Khettache, Laid and Sebti Belkacem and Abdessemed, Rachid and Bendaas, Mohamed-Lokmane}
}
@book {66916,
	title = {Fuzzy Sliding Mode Speed Controller Design of Induction Motor, Drives},
	year = {2012},
	month = {2012},
	author = {Naceri, Farid and Laamayad, Tahar and Sebti Belkacem}
}
@proceedings {67050,
	title = {La double DTC d\&rsquo;une Machine Asynchrone {\`a} Double Alimentation},
	year = {2012},
	month = {2012},
	author = {Boumaraf, Farid and Abdessemed, Rachid and Bendaas, Mohamed-Lokmane and Sebti Belkacem}
}
@article {67103,
	title = {Reduction of torque ripple in DTC for induction motor using input-output feedback linearization},
	journal = {Turk Journal of Electrical Engineering and computer Sciences. T{\"u}bitakTurk Journal of Electrical Engineering and computer Sciences. T{\"u}bitak},
	volume = {20},
	year = {2012},
	month = {2012},
	author = {Sebti Belkacem and Naceri, Farid and Abdessemed, Rachid}
}
@book {67065,
	title = {Simulation and determination of the laws control of the SRM for the integrated starter generator application},
	year = {2012},
	month = {2012},
	author = {Boudouda, M. and Naceri, Farid and Sebti Belkacem}
}
@mastersthesis {67353,
	title = {Contribution {\`a} la commande directe du couple de la machine {\`a} induction},
	year = {2011},
	month = {2011},
	type = {Th{\`e}se de Doctorat},
	author = {Sebti Belkacem}
}
@article {67352,
	title = {Improvement in DTC-SVM of AC drives using a new robust adaptive control algorithm},
	journal = {International Journal of Control, Automation and SystemsInternational Journal of Control, Automation and Systems},
	volume = {9},
	year = {2011},
	month = {2011},
	pages = {267-275},
	isbn = {2005-4092},
	author = {Sebti Belkacem and Naceri, Farid and Abdessemed, Rachid}
}
@article {67531,
	title = {Induction Motor Direct Torque Control{\textendash}Fuzzy Logic Contribution},
	journal = {IU-Journal of Electrical \& Electronics EngineeringIU-Journal of Electrical \& Electronics Engineering},
	volume = {10},
	year = {2010},
	month = {2010},
	pages = {1207-1212},
	isbn = {1303-0914},
	author = {CHIKHI, ABDESLEM and Chikhi, Khaled and Sebti Belkacem}
}
@book {67573,
	title = {A New Control Strategy by Combining Direct Torque Control with Feedback Linearization for Induction Motor Drive},
	year = {2010},
	month = {2010},
	author = {Sebti Belkacem and Naceri, Farid and Abdessemed, Rachid}
}
@article {67571,
	title = {A novel robust adaptive control algorithm and application to DTC-SVM of AC drives},
	journal = {Serbian Journal of Electrical EngineeringSerbian Journal of Electrical Engineering},
	volume = {7},
	year = {2010},
	month = {2010},
	author = {Sebti Belkacem and Naceri, Farid and Abdessemed, Rachid}
}
@article {67572,
	title = {Robust nonlinear control for direct torque control of induction motor drive using space vector modulation},
	journal = {Journal of Electrical EngineeringJOURNAL OF ELECTRICAL ENGINEERING},
	volume = {10},
	year = {2010},
	month = {2010},
	author = {Sebti Belkacem and Naceri, Farid and Abdessemed, Rachid}
}
@article {62115,
	title = {EKF-based speed sensorless direct torque control of Induction Motor drives},
	journal = {Asian Journal of Information TechnologyAsian Journal of Information Technology},
	volume = {6},
	year = {2007},
	month = {2007},
	pages = {185-191},
	author = {Sebti Belkacem and Naceri, F and Abdessemend, R}
}
