@article {62970,
	title = {Adaptive direct power control for double fed induction generator used in wind turbine},
	journal = {International Journal of Electrical Power \& Energy SystemsInternational Journal of Electrical Power \& Energy Systems},
	volume = {114},
	year = {2020},
	month = {1/1/2020},
	abstract = {This papers deal with a new Adaptive Direct Power Control for Doubly-Fed Induction Generator of 1.5 MW. The main feature of the proposed strategy is based on the replacement of the fixed switching table by an adaptive one. The online update of the adaptive switching table depends on the reactive power variation and past switching sequences. The proposed adaptive direct power control is compared with Vector Control and Classical Direct Power Control. The robustness of the proposed control scheme against parameter, load and wind speed variations have done with success. The main performance of the Adaptive Direct Power Control strategy is the reduction of powers ripples, thus reduce of torque ripple on the shaft of the turbine.},
	author = {Mazouz, F. and Belkacem, S. and Colak, I. and Drid, S. and Harbouche, Y.}
}
@article {63209,
	title = {Fault-tolerant control of a smart PV-grid hybrid system},
	journal = {IET Renewable Power GenerationIET Renewable Power Generation},
	volume = {13 N{\textdegree} 13},
	year = {2019},
	month = {2019/7/12},
	pages = {2451-2461},
	author = {Tiar, M. and Betka, A. and Drid, S. and Abdeddaim, S. and Sellali, M. and Medjmadj, S.}
}
@article {63245,
	title = {Fuzzy \&ndash;Super twisting control implementation of battery/super capacitor for electric vehicles},
	journal = {ISA transactionsISA Transactions},
	year = {2019},
	month = {2019},
	abstract = {The present paper deals with a real-time implementation of a novel Fuzzy logic energy management strategy (EMS), applied to a battery{\textendash}super capacitor hybrid energy system and associated with a permanent magnet synchronous motor (PMSM) which emulates the traction part of an electric vehicle (EV). On the sources side, the fuzzy logic supervisor acts in a smart way to permute smoothly between the various operations modes via an efficient power frequency splitting. In addition, it permits a quite regulation of both the DC bus and the super-capacitor (SC) voltages regardless of the speed profile variations to ensure an optimal power flow to the load and to keep the SC operation in a safe voltage range while providing or absorbing power in transients. On the traction side, a second order sliding mode control called {\textquoteleft}super-twisting{\textquoteright} (ST), associated with a space vector modulation (SVM) strategy is applied to ensure\&nbsp;{\textellipsis}},
	author = {Sellali, M. and Abdeddaim, S. and Betka, A. and Djerdir, A. and Drid, S. and Tiar, M.}
}
@article {63243,
	title = {Novel control implementation for electric vehicles based on fuzzy-back stepping approach},
	journal = {EnergyEnergy},
	volume = {178},
	year = {2019},
	month = {2019},
	pages = {644-655},
	abstract = {The present paper deals with a real-time assessment of a fuzzy {\textendash}backstepping based control applied to a battery-supercapacitor (SC) hybrid energy storage system (HESS). To properly emulate the behavior of an electric vehicle, the proposed topology is extended to a PMSM drive, that represents the traction part. The proposed control scheme is divided into two parts: The first part plans a fuzzy logic power management approach, to operate the system in a smart way: First, It ensures an optimal load power-sharing, focusing the operation of the involved sources in a safe mode. Second, a quite regulation of both the dc bus and the SC voltage without additional controllers. The second part proposes a back-stepping direct torque control (BS-DTC), associated to a space vector modulation (SVM) strategy, to ensure decoupled torque and flux control of the PMSM machine. The experimental results, conducted on a small\&nbsp;{\textellipsis}},
	author = {Sellali, M. and Betka, A. and Drid, S. and Djerdir, A. and Allaoui, L. and Tiar, M.}
}
@article {64983,
	title = {Backstepping glycemic control of type 1 Diabetes for implementation on an embedded system},
	journal = {The International Journal Bioautomation.The International Journal Bioautomation.},
	volume = {22},
	year = {2018},
	month = {2018},
	pages = {117-132},
	author = {Djouima, M. and Drid, S. and Mehdi, D.}
}
@article {64864,
	title = {High Efficiency Induction Motor Drives Using Type-2 Fuzzy Logic},
	journal = {The European Physical Journal PlusThe European Physical Journal Plus},
	volume = {133},
	year = {2018},
	month = {2018},
	author = {Khemis, A. and Benlaloui, I. and Drid, S. and Chrifi-Alaoui, L. and Khamari, D. and Menacer, A.}
}
@article {64984,
	title = {Higher Order Sliding Mode Control for Blood Glucose Regulation of Type 1 Diabetic Patients},
	journal = {International Journal of System Dynamics Applications (IJSDA)International Journal of System Dynamics Applications (IJSDA)},
	volume = {7},
	year = {2018},
	month = {2018},
	pages = {65-84},
	author = {Djouima, M. and Azar, AT and Drid, S. and Mehdi, D.}
}
@article {65025,
	title = {A New Implementation of Maximum Power Point Tracking based on Fuzzy Logic Algorithm for Solar Photovoltaic System},
	journal = {International Journal of Engineering, Transactions AInternational Journal of Engineering, Transactions A},
	volume = {31},
	year = {2018},
	month = {2018},
	pages = {184-191},
	author = {Boutabba, T. and Drid, S. and Alaoui, L. Chrifi and Benbouzid, M.}
}
@article {65118,
	title = {Online robust estimation of flux and load torque in induction motors},
	journal = {The International Journal of Advanced Manufacturing TechnologyThe International Journal of Advanced Manufacturing Technology},
	volume = {94},
	year = {2018},
	month = {2018},
	pages = {2703{\textendash}2713},
	author = {Bahloul, M. and Alaoui, L. Chrifi and Vargas, AN and Chaabane, M. and Drid, S.}
}
@article {65011,
	title = {Robust nonlinear control via feedback linearization and Lyapunov theory for permanent magnet synchronous generator- based wind energy conversion system},
	journal = {Frontiers in EnergyFrontiers in Energy},
	year = {2018},
	month = {2018},
	abstract = {In this paper, the method for the nonlinear control design of a permanent magnet synchronous generator based-wind energy conversion system (WECS) is proposed in order to obtain robustness against disturbances and harvest a maximum power from a typical stochastic wind environment. The technique overcomes both the problem of nonlinearity and the uncertainty of the parameter compared to such classical control designs based on traditional control techniques. The method is based on the differential geometric feedback linearization technique (DGT) and the Lyapunov theory. The results obtained show the effectiveness and performance of the proposed approach.},
	author = {Cheikh, R. and Menacer, A. and Alaoui, L. Chrifi and Drid, S.}
}
@article {65119,
	title = {Robust Sensorless Vector Control of an Induction Machine Using Multiobjective Adaptive Fuzzy Luenberger Observer},
	journal = {ISA TransactionsISA Transactions},
	volume = {74},
	year = {2018},
	month = {2018},
	pages = {74, 144-154},
	author = {Bahloul, M. and Alaoui, L. Chrifi and Drid, S. and Souissi, M. and Chabaane, M.}
}
@article {65028,
	title = {Sensorless control and diagnosis of synchronous generator used in wind energy conversion system under inter turn short-circuit fault},
	journal = {International Journal of Power and Energy ConversionInternational Journal of Power and Energy Conversion},
	year = {2018},
	month = {2018},
	author = {Bouslimani, S. and Drid, S. and Chrifi-Alaoui, L.}
}
@article {64395,
	title = {Degradation and performance evaluation of PV module in desert climate conditions with estimate uncertainty in measuring},
	journal = {Serbian Journal of Electrical EngineeringSerbian Journal of Electrical Engineering},
	volume = {14},
	year = {2017},
	month = {2017},
	pages = {277-299},
	abstract = {The performance of photovoltaic (PV) module is affected by outdoor conditions. Outdoor testing consists installing a module, and collecting electrical performance data and climatic data over a certain period of time. It can also include the study of long-term performance under real work conditions. Tests are operated in URAER located in desert region of Gharda{\"\i}a (Algeria) characterized by high irradiation and temperature levels. The degradation of PV module with temperature and time exposure to sunlight contributes significantly to the final output from the module, as the output reduces each year. This paper presents a comparative study of different methods to evaluate the degradation of PV module after a long term exposure of more than 12 years in desert region and calculates uncertainties in measuring. Firstly, this evaluation uses three methods: Visual inspection, data given by Solmetric PVA-600 Analyzer translated at Standard Test Condition (STC) and based on the investigation results of the translation equations as ICE 60891. Secondly, the degradation rates calculated for all methods. Finally, a comparison between a degradation rates given by Solmetric PVA-600 analyzer, calculated by simulation model and calculated by two methods (ICE 60891 procedures 1, 2). We achieved a detailed uncertainty study in order to improve the procedure and measurement instrument.},
	author = {Fezzani, A. and Mohammed, I. Hadj and Drid, S. and Zaghba, L. and Bouchakour, A. and Benbitour, M. Khennane and Hamid, O. Samir}
}
@article {64396,
	title = {Experimental investigation of effects of partial shading and faults on photovoltaic modules performances},
	journal = {Leonardo Electronic Journal of Practices and TechnologiesLeonardo Electronic Journal of Practices and Technologies},
	year = {2017},
	month = {2017},
	pages = {183-200},
	abstract = {Temperature, solar insolation, shading and faults affect the performance of the photovoltaic array. Often, the PV arrays get shadowed, completely or partially, by the passing clouds neigh boring buildings, towers or by trees, and other utilities. The situation is of a interest in a case of the large PV power plants. In the case of the shading the characteristics of the PV module are more complex with the several peak values. Under such conditions, it is very difficult to determine the maximum power point (MPP). MATLAB-programmed modelling and simulation of photovoltaic module is presented here, by focusing on the effects of partial shading on the output of the photovoltaic (PV) module and Faults Bypass Diode. The proposed models facilitate simulating the dynamic performances of PV-based power systems and have been validated by means of simulation study. The southern part of Algeria, where the experimental system is mounted, is particularly well appropriate to photovoltaic systems. To evaluate the effectiveness of the proposed model, experiments have been conducted to compare the experimental and simulated current-voltage (IV) and power-voltage (PV) curves of a PV system under some predefined partial shading and faults bypass diode, using different PV technologies such as mono-crystalline and multi-crystalline.},
	author = {Fezzani, A. and Mohammed, I. Hadj and Drid, S. and Zaghba, L. and Bouchakour, A. and Benbitour, M. Khennane}
}
@article {64477,
	title = {Implementation and comparative study of control strategies for an isolated DFIG based WECS},
	volume = {132},
	year = {2017},
	month = {2017},
	pages = {415},
	abstract = {Nowadays, a global interest for renewable energy sources has been growing intensely. In particular, a wind energy has become the most popular. In case of autonomous systems, wind energy conversion system (WECS) based on a double fed induction generator (DFIG) is widely used. In this paper, in order to control the stand-alone system outputs under wind speed and load variations, three kinds of nonlinear control strategies have been proposed, applied and compared, such as: Classical PI controller, Back-Stepping and Sliding Mode controllers. A series of experiments have been conducted to evaluate and to compare the developed controllers{\textquoteright} dynamic performances under load demand and speed variations. The design and the implementation of different control strategies to a 1.5kW doubly fed induction machine is carried out using a dSpace DS1104 card based on MATLAB/Simulink environment\&nbsp;{\textellipsis}},
	author = {Bouchiba, N. and Barkia, A. and Alaoui, L. Chrifi and Drid, S. and Kammoun, MBA}
}
@article {64478,
	title = {Real-time integration of control strategies for an isolated DFIG-based WECS},
	journal = {The European Physical Journal PlusThe European Physical Journal Plus},
	volume = {132},
	year = {2017},
	month = {2017},
	pages = {334},
	author = {Bouchiba, N. and Barika, A. and Alaoui, L. Chrifi and Drid, S. and Sallem, S. and Kammoun, MBA}
}
@article {65528,
	title = {dSPACE Real-Time Implementation of Maximum Power Point Tracking Based on Ripple Correlation Control (RCC) Structure for Photovoltaic System},
	journal = {5th International Conference on Systems and Control, Cadi Ayyad University5th International Conference on Systems and Control, Cadi Ayyad University},
	year = {2016},
	month = {2016},
	author = {Boutabba, T. and Drid, S. and Alaoui, L. Chrifi and Ouriagli, M. and Benbouzid, MEH}
}
@article {65617,
	title = {Fuzzy speed estimation in case of sensorless induction machine vector control},
	journal = {Turkish Journal of Electrical Engineering \& Computer SciencesTURKISH JOURNAL OF ELECTRICAL ENGINEERING \& COMPUTER SCIENCES},
	volume = {24},
	year = {2016},
	month = {2016},
	pages = {3961{\textendash}3975},
	author = {Bahloul, M. and Souissi, M. and Alaoui, L. Chrifi and Drid, S.}
}
@article {65609,
	title = {Modified speed sensorless indirect field-oriented of induction motor drive},
	journal = {International Journal of Modelling, Identification and Control journalInternational Journal of Modelling, Identification and Control journal},
	volume = {21 No. 4},
	year = {2016},
	month = {2016},
	pages = {370-377},
	author = {Beddiaf, Y. and Zidani, F. and Alaoui, L. Chrifi and Drid, S.}
}
@article {65574,
	title = {On-Line Efficiency Improvement of Induction Motor Vector Controlled},
	journal = {Advances in Electrical and Electronic Engineering journalAdvances in Electrical and Electronic Engineering journal},
	volume = {14},
	year = {2016},
	month = {2016},
	author = {Benoudjit, D. and NAIT-SAID, MS and Drid, S. and Nait-Said, N.}
}
@article {65251,
	title = {Optimal energy control of a PV-fuel cell hybrid system},
	journal = {International Journal of Hydrogen EnergyInternational Journal of Hydrogen Energy},
	year = {2016},
	month = {2016},
	author = {Tiar, M. and Betka, A. and Drid, S. and Abdedaim, S. and Becherif, M. and Tabandjat, A.}
}
@article {65519,
	title = {Optimized Torque Control via Backstepping Using Genetic Algorithm of Induction Motor},
	journal = {Automatika {\textendash} Journal for Control, Measurement, Electronics, Computing and CommunicationsAutomatika {\textendash} Journal for Control, Measurement, Electronics, Computing and Communications},
	volume = {57},
	year = {2016},
	month = {2016},
	pages = {579{\textendash}592},
	author = {Chaouch, S. and Abdou, L. and Alaoui, L. Chrifi and Drid, S.}
}
@article {65373,
	title = {Robust Direct Power Control based on the Lyapunov theory of a grid-connected Brushless doubly fed induction generator},
	journal = {ournal Frontiers in Energy, Springerournal Frontiers in Energy, Springer},
	volume = {10 N{\textdegree}3},
	year = {2016},
	month = {2016},
	pages = {298-307},
	abstract = {This paper deals with robust direct power control of a grid-connected brushless doubly-fed induction generator(BDFIG). Using a nonlinear feedback linearization strategy, an attempt is made to improve the desired performances by controlling the generated stator active and reactive power in a linear and decoupled manner. Therefore, to achieve this objective, the Lyapunov approach is used associated with a sliding mode control to guarantee the global asymptotical stability. Thus, an optimal operation of the BDFIG in sub-synchronous operation is obtained as well as the stator power flows with the possibility of keeping stator power factor at a unity. The proposed method is tested with the Matlab/Simulink software. Simulation results illustrate the performances and the feasibility of the designed control.},
	author = {Mahboub, MA and Drid, S. and Sid, MA and Cheikh, R.}
}
@article {65225,
	title = {Robust Nonlinear Control of a Mobile Robot},
	journal = {Journal of Electrical Engineering \& TechnologyJournal of Electrical Engineering \& Technology},
	volume = {11, No.4},
	year = {2016},
	month = {2016},
	author = {Zidani, G. and Drid, S. and Alaoui, L. Chrifi and Arar, D. and Bussy, P.}
}
@article {65311,
	title = {Second Order Sliding Mode Control of DC-DC converter used in the Photovoltaic System according an Adaptive MPPT},
	journal = {Journal of Renewable Energy ResearchJournal of Renewable Energy Research},
	volume = {6, No.2},
	year = {2016},
	month = {2016},
	author = {Sahraoui, H. and Alaoui, L. Chrifi and Drid, S. and Bussy, P.}
}
@article {65374,
	title = {Sliding Mode Control of Grid Connected Brushless Doubly fed Induction Generator driven by Wind Turbine in Variable Speed},
	journal = {International Journal of Systems Assurance Engineering and ManagementInternational Journal of Systems Assurance Engineering and Management},
	year = {2016},
	month = {2016},
	author = {Mahboub, MA and Drid, S. and Sid, MA}
}
@article {66057,
	title = {A developed energy management strategy for a stand-alone hybrid power system for medium rural health building},
	journal = {International Transactions On Electrical Energy Systems Int. Trans. Electr. Energ. Syst. (2015)International Transactions On Electrical Energy Systems Int. Trans. Electr. Energ. Syst. (2015)},
	volume = {26(4)},
	year = {2015},
	month = {2015},
	abstract = {This paper deals with load side management strategy for (photovoltaic{\textendash}wind{\textendash}diesel) hybrid system for medium rural health building located in the Sahara region. The paper presents an overview about geographic and climate data of the location and develops a typical load profile of electrical energy, depending on a real investigation of daily electricity consumption. The base of the proposed management strategy is the control of the air conditioning system and the non-critical lighting of the building as they consume more than 50\% of the total power consumption. The result shows that the reduction in the peak consumption is about 20\% using the proposed management strategy, which has significant economical, technical, and environmental benefits},
	author = {Alnejaili, T. and Drid, S. and Driss, M. and Alaoui, L. Chrifi}
}
@article {65991,
	title = {dSPACE implementation of a propulsion system using dual-induction \Real-Virtual motors},
	journal = {Turkish Journal of Electrical Engineering \& Computer SciencesTURKISH JOURNAL OF ELECTRICAL ENGINEERING \& COMPUTER SCIENCES},
	year = {2015},
	month = {2015},
	author = {Benoudjit, D. and Drid, S. and Nait-Said, N. and NAIT-SAID, MS and Alaoui, L. Chrifi}
}
@article {66056,
	title = {Dynamic control and advanced load management of a stand-alone hybrid renewable power system for remote housing},
	journal = {Energy Conversion and Management, ElsiverEnergy Conversion and Management, Elsiver},
	volume = {105},
	year = {2015},
	month = {2015},
	author = {Alnejaili, T. and Drid, S. and Driss, M. and Alaoui, L. Chrifi and Belarbi, R. and Hamdouni, A.}
}
@article {66030,
	title = {Effective Fuzzy Logic Control of a Stand-alone Photovoltaic Pumping System},
	journal = {the Journal of Renewable Energy Researchthe Journal of Renewable Energy Research},
	volume = {5, No.3},
	year = {2015},
	month = {2015},
	abstract = {This paper presents an effective control of a stand-alone batteryless photovoltaic (PV) pumping system. The whole design (configuration and control) is oriented in order to minimize the cost and maximize the effectiveness, the efficiency and the reliability of the whole system. Beyond the withdrawal of the battery and the rotor speed sensor, the system is composed only of a DC-DC boost converter, a DC-AC inverter, an Induction Motor (IM) and a centrifugal pump. In order to control the dc-link voltage and maximize the efficiency of the IM, a Fuzzy Logic Controller (FLC) is introduced. The validity and the effectiveness of the proposed FLC is tested and confirmed by a simulation under various climate changes.},
	author = {Bahloul, M. and Alaoui, L. Chrifi and Souissi, M. and Chaabane, M. and Drid, S.}
}
@article {65993,
	title = {Implementation of a New MRAS Speed Sensorless Vector Control of Induction Machine},
	journal = {IEEE Transactions On Energy ConversionIEEE Transactions On Energy Conversion},
	volume = {30 No. 2},
	year = {2015},
	month = {2015},
	pages = {588-595},
	author = {Benlaloui, I. and Drid, S. and Alaoui, L. Chrifi and Ouriagli, M.}
}
@article {66022,
	title = {Novel Speed Sensorless Indirect Field-Oriented Control Of Induction Motor Using Pll And Ekf,},
	journal = {Journal Of Electrical EngineeringJOURNAL OF ELECTRICAL ENGINEERING},
	volume = {15},
	year = {2015},
	month = {2015},
	author = {Beddiaf, Y. and Zidani, F. and Alaoui, L. Chrifi and Drid, S.}
}
@article {66027,
	title = {TS Fuzzy Logic-Based Rotor Resistance Tuning in case of Induction Machine Vector Control},
	journal = {Automatika-Journal for Control, Measurement, Electronics, Computing and CommunicationsAutomatika-Journal for Control, Measurement, Electronics, Computing and Communications},
	volume = {56, N{\textdegree}.4},
	year = {2015},
	month = {2015},
	pages = {454{\textendash}465},
	author = {Bahloul, M. and Souissi, M. and Chaabane, M. and Alaoui, L. Chrifi and Drid, S.}
}
@article {66491,
	title = {Implementation of MRAC controller of a DFIG based variable speed grid connected wind turbine},
	journal = {Energy Conversion and Management, ElsiverEnergy Conversion and Management, Elsiver},
	volume = {79},
	year = {2014},
	month = {2014},
	pages = {281{\textendash}288},
	author = {Abdedaim, S. and Betka, A. and Drid, S. and Becherif, M.}
}
@article {66316,
	title = {The permanent magnet synchronous motor robust nonlinear feedback control based on lyapunov method -experimental evaluation},
	journal = {Journal of Electrical Engineering, JEEJournal of Electrical Engineering, JEE},
	volume = {14, N{\textdegree}3},
	year = {2014},
	month = {2014},
	pages = {28-33},
	author = {Fezzani, A. and Drid, S. and Makouf, A.}
}
@article {66315,
	title = {Speed Sensoless Robust Control of Permanent Magnet Synchronous Motor Based on Second-Order Sliding-Mode Observer},
	journal = {Serbian Journal of Electrical EngineeringSerbian Journal of Electrical Engineering},
	volume = {11, No.3},
	year = {2014},
	month = {2014},
	pages = {419-433},
	author = {Fezzani, A. and Drid, S. and Makouf, A. and Alaoui, L. Chrifi and Ouriagli, M.}
}
@article {66719,
	title = {Application of Fuzzy Logic Control Algorithm as Stator Power Controller of a Grid-Connected Doubly Fed Induction Generator},
	journal = {Journal Frontiers in Energy, SpringJournal Frontiers in Energy, Spring},
	volume = {7 No. 1},
	year = {2013},
	month = {2013},
	author = {Cheikh, R. and Menacer, A. and Drid, S. and Tiar, M.}
}
@article {66752,
	title = {dSPACE implementation of a propulsion system using dual-induction \&$\#$39;Real-Virtual\&$\#$39; motors},
	journal = {Turkish Journal of Electrical Engineering \& Computer SciencesTURKISH JOURNAL OF ELECTRICAL ENGINEERING \& COMPUTER SCIENCES},
	volume = {21},
	year = {2013},
	month = {2013},
	author = {Benoudjit, D. and Drid, S. and Nait-Said, N. and NAIT-SAID, MS and Alaoui, L. Chrifi}
}
@article {66643,
	title = {High Performance of Self Scheduled Linear Parameter Varying Control with Flux Observer of Induction Motor},
	journal = {JEET Journal of Electrical Engineering \& TechnologyJEET Journal of Electrical Engineering \& Technology},
	volume = {8 N{\textdegree} 5},
	year = {2013},
	month = {2013},
	pages = {1202-1211},
	author = {Khamari, D. and Makouf, A. and Drid, S. and Alaoui, L. Chrifi}
}
@article {66732,
	title = {Maximum Power Point Tracking Control for Photovoltaic System Using Adaptive Neuro- Fuzzy \&ldquo;ANFIS\&rdquo;},
	journal = {Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER{\textquoteright}13Eighth International Conference and Exhibition on Ecological Vehicles and Renewable Energies EVER{\textquoteright}13},
	year = {2013},
	month = {2013},
	author = {Boutabba, T. and Drid, S. and Benbouzid, M. E. H.}
}
@article {66721,
	title = {Robust control cased of the Lyapunov theory of a grid connected doubly fed induction generator},
	journal = {Journal Frontiers in Energy, SpringJournal Frontiers in Energy, Spring},
	volume = {7 N{\textdegree}2},
	year = {2013},
	month = {2013},
	pages = {191-196},
	abstract = {This paper discusses the robust control of a grid-connected doubly-fed induction generator (DFIG) controlled by vector control using a nonlinear feedback linearization strategy in order to ameliorate the performances of the control and to govern the developed stator active and reactive power in a linear and decoupled manner, in which an optimal operation of the DFIG in subsynchronous operation is given, as well as the control stator power flow with the possibility of keeping stator power factor at a unity. The use of the state-all-flux induction machine model gives place to a simpler control model. So, to achieve this objective, the Lyapunov approach is used associated with a sliding mode control to guarantee the global asymptotical stability and the robustness of the parametric variations.},
	author = {Cheikh, R. and Menacer, A. and Drid, S.}
}
@article {66644,
	title = {Robust Linear Parameter Varying Induction Motor Control with Polytopic Models},
	journal = {Serbian Journal of Electrical EngineeringSerbian Journal of Electrical Engineering},
	volume = {10, No.2},
	year = {2013},
	month = {2013},
	pages = {335-348},
	author = {Khamari, D. and Makouf, A. and Drid, S. and Alaoui, L. Chrifi}
}
@article {66703,
	title = {Robust Power Control of the Small Doubly\&shy;\&shy; Fed Induction Wind turbine Generator with Improved Maximum Power Point Tracking},
	journal = {International Journal On Advanced Electrical EngineeringInternational Journal On Advanced Electrical Engineering},
	volume = {1},
	year = {2013},
	month = {2013},
	author = {Drid, S. and Alaoui, L. Chrifi and Benbouzid, MEH}
}
@article {67264,
	title = {Direct torque control of induction motor fed by three-phase PWM inverter using fuzzy logic and neural network,},
	journal = {ELECTROMOTION journalELECTROMOTION journal},
	volume = {18, N{\textdegree} 1},
	year = {2011},
	month = {2011},
	pages = {22-28},
	author = {Kadri, F. and Drid, S. and Djarah, D. and F.Djeffal}
}
@article {67227,
	title = {Modeling and Control of Indirect powers of a Doubly Fed Induction Generator},
	journal = {Journal of Hydrocarbons Mines and Environmental ResearchJournal of Hydrocarbons Mines and Environmental Research},
	volume = {2},
	year = {2011},
	month = {2011},
	author = {MEKKAOUI, N. and Drid, S. and NAIT-SAID, MS}
}
@article {67356,
	title = {Speed-sensorless sliding-mode direct torque control of induction motors},
	journal = {ELECTROMOTION journalELECTROMOTION journal},
	volume = {18, N{\textdegree} 1},
	year = {2011},
	month = {2011},
	pages = {29-36},
	author = {Behloul, M. and NAIT-SAID, MS and Drid, S.}
}
@article {67289,
	title = {Variable speed Doubly Fed Induction Generators Power Control with Wind Turbine Maximum Power Point Tracking},
	journal = {Journal of Hydrocarbons Mines and Environmental ResearchJournal of Hydrocarbons Mines and Environmental Research},
	volume = {2},
	year = {2011},
	month = {2011},
	author = {Drid, S. and Makouf, A. and NAIT-SAID, MS}
}
