@article {65112,
	title = {Study of Microstructure and Mechanical Properties of Sintered Fe-Cu Alloys, ,},
	journal = {International Journal of Engineering Research in AfricaInternational Journal of Engineering Research in Africa},
	volume = {34},
	year = {2018},
	month = {2018},
	abstract = {In the present work, Fe-Cu based alloys with different compositions have been obtained by using Powder metallurgy (PM). These alloys were created with the purpose of increasing mechanical properties of the parts. Nevertheless, little have been published, once this is a matter of industrial interest. In this work, samples of Fe100-x Cux (x=0.40, 0.55, 0.70, 0.85 and 1) alloys were processed by cold pressing at 10 MPa, followed by sintering at 1250 C{\textdegree}. Structures formed during sintering were studied by EDS. Microstructural aspects were observed by MEB. Densification and microhardness tests were also performed.},
	author = {BAROURA, L. and BOUKHOBZA, A. and Derardja, A. and FEDAOUI, K.}
}
@article {64168,
	title = {Effect of the Wire Diameter on the Stability of Micro-Scale Ag/AgCl Reference Electrode},
	journal = {Journal of The Electrochemical SocietyJournal of The Electrochemical Society},
	year = {2017},
	month = {2017},
	pages = {E560-E564},
	author = {SEGHIR-MECHAOUR, S. and Derardja, A. and OULMI, K. and DEEN, M. J.}
}
@book {66910,
	title = {. The impact of the mechanical behavior of the stent deployment during the installation. comparative study between stainless steel and Nitinol behavior., 2012, Dec. 13-15},
	year = {2012},
	month = {2012},
	address = {Dubai - UAE},
	author = {OUTTAS, T. and BOUHAFS, H. and Derardja, A.}
}
@article {67190,
	title = {Electrochemical Growth of High-aspect Ratio Nanostructured Silver Chloride on Silver and its Application to Miniaturized Reference Electrodes},
	journal = {NanotechnologyNanotechnology},
	volume = {Vol. 22(31)},
	year = {2011},
	month = {2011},
	pages = {315601, 8 journal pages},
	abstract = {The sensitivity of many biological and chemical sensors is critically dependent on the stability of the potential of the reference electrode being used. The stability of a reference electrode{\textquoteright}s potential is highly influenced by the properties of its surface. In this paper, for the first time, the formation of nanosheets of silver chloride on silver wire is observed and controlled using high anodic constant potential (\&gt;0.5\&nbsp;V) and pulsed electrodeposition. The resulting nanostructured morphology substantially improves the electrode{\textquoteright}s potential stability in comparison with the conventional globular surface structure. The increased stability is attributed to the increase in the surface area of the silver chloride produced by the nanosheet formation.},
	author = {SAFARI-MOHSENABAD, S. and SELVAGANAPATHY, P. R. and Derardja, A. and DEEN, M. J.}
}
@mastersthesis {67318,
	title = {Etude des caract{\'e}ristiques m{\'e}caniques d\&rsquo;un stent},
	year = {2011},
	month = {2011},
	type = {Master{\textquoteright}s Thesis},
	author = {Bouhafs, Hichem and Derardja, A.}
}
@article {67299,
	title = {Isotropic Stress Distribution in Cu/(001) Fe Two Sheets, World Academy of Science},
	journal = {Engineering and TechnologyEngineering and Technology},
	volume = {Vol:5},
	year = {2011},
	month = {2011},
	pages = {pp 07-23},
	abstract = {The nanotechnology based on epitaxial systems includes single or arranged misfit di slocations. In general, whatever is the type of dislocation or the geometry of the array formed by the dislocations; it is important for experimental studies to know exactly the stress distribution for which there is no analytical expression [1,2]. This work, using a numerical analysis, deals with relaxation of epitaxial layers having at their interface a periodic network of edge misfit dislocations. The stress distribution is estimated by using isotropic elasticity. The results show that the thickness of the two sheets is a crucial parameter in the stress distributions and then in the profile of the two sheets. A comparative study between the case of single dislocation and the case of parallel network shows that the layers relaxed better when the interface is covered by a parallel arrangement of misfit. Consequently, a single dislocation at the interface produces an important stress field which can be reduced by inserting a parallel network of dislocations with suitable periodicity.},
	author = {Derardja, A. and BAROURA, L. and M. BRIOUA}
}
@article {67526,
	title = {Anisotropic Elastic Distortions of a Buried Dissociated Hexagonal Network of Dislocations in a Nickel Based Super Alloys,},
	journal = {Advanced Materials Research, Advances in Materials and Processing TechnologiesAdvanced Materials Research, Advances in Materials and Processing Technologies},
	volume = {Volumes 83 - 86},
	year = {2010},
	month = {2010},
	pages = {pp 289-295},
	abstract = {\&nbsp;\&nbsp;\&nbsp; Nickel based super alloys are promising materials for high temperature structural applications because of their low density. The single grain super alloys are extremely creep resistant at high temperature, due to the fraction of Ni3Al based {\textquoteright} precipitates coherent with a Ni based  matrix [1, 3]. The cuboids group together and form semi-coherent interfaces after a long annealing at high temperature. The {\textquoteright} precipitate growths in nickel base super alloys often favor the parallelism of (111) planes between cubic dissimilar crystals [4]. In consequences, a hexagonal network of dislocations, that covers the hetero-interphase, is arranged by accommodation of the angular misfit between two semi coherent crystals ( ). In this work, the magnitude of the distortions is simulated as arising from a trigonal network of subsurface misfit dislocations partly dissociated in Shockley dislocations limiting intrinsic and /or extrinsic stacking faults. The results derived from a previous explicit formulation using double Fourier series [5]. Each harmonic term of the series depends on the anisotropic elastic constants and the thickness of each phase. The program built is in a double precision Fortran language and it shows the magnitude and the aspect of the distortions of the free surfaces when the dissociation change in the hetero-interphase. Also, the program has the advantage to fully apply to hetero-epitaxial systems, whatever is the thickness of the free surfaces. \&nbsp;},
	author = {Derardja, A.}
}
@book {67429,
	title = {Nanosheet Formation by Electrodeposition and Its Application to Miniaturized Reference Electrodes ,25 - 30 avril},
	year = {2010},
	month = {2010},
	address = {Vancouver - Canada},
	author = {SAFARI-MOHSENABAD, S. and SELVAGANAPATHY, P. R. and Derardja, A. and DEEN, M. J.}
}
@article {67685,
	title = {Simulation of Thin Film Relaxation by Buried Misfit Networks,},
	journal = {International Journal of Mechanical, Industrial and Aerospace Engineering,International Journal of Mechanical, Industrial and Aerospace Engineering,},
	volume = {VOL 3},
	year = {2009},
	month = {2009},
	pages = {pp 98-103},
	author = {Derardja, A.}
}
