@proceedings {64967,
	title = {Etude de la texture et les propri{\'e}t{\'e}s m{\'e}caniques et {\'e}lectriques des fils de cuivre tr{\'e}fil{\'e}s et recuits},
	journal = {International Conference on Green Energy \& Environmental Engineering (GEEE-2018)  Proceedings of Engineering and Technology {\textendash} PET },
	year = {2018},
	month = {2018},
	address = {Sousse ,Tunisia},
	abstract = {
	Le constate dans cette {\'e}tude et l{\textquoteright}augmentation de l{\textquoteright}essai de la microduret{\'e} et la r{\'e}sistivit{\'e} {\'e}lectrique, avec l{\textquoteright}augmentation du taux de d{\'e}formation. On {\`a} remarqu{\'e}e une diminution de ces dernier avec l{\textquoteright}effet de traitement thermique. L{\textquoteright}analyse de la tailles des grains montre une diminution avec l{\textquoteright}augmentation du taux de d{\'e}formation et l{\textquoteright}effet du traitement thermique conduit {\`a} une homog{\'e}n{\'e}isation des tailles des grains {\`a} fort taux de d{\'e}formation et long dur{\'e}e de maintien de recuit, l{\textquoteright}{\'e}tude de la texture de recristallisation montre que l{\textquoteright}{\'e}tat tr{\'e}fil{\'e} et recuit se compose de m{\^e}me renforcement que le fil machine fibre //DN et //DN. On observe aussi apr{\`e}s recuit une forte diminution de l{\textquoteright}intensit{\'e} de la fibre //DN majoritaire {\`a} l{\textquoteright}{\'e}tat tr{\'e}fil{\'e}. En revanche, la fibre //DN reste stable.

},
	url = {https://d1wqtxts1xzle7.cloudfront.net/57030313/53-libre.pdf?1532007228=\&response-content-disposition=inline\%3B+filename\%3DEtude_de_la_texture_et_des_proprietes_me.pdf\&Expires=1652023480\&Signature=JK9EP~4V3Olb7C4AQ-6XioTD5qUU2xrKbbaYI~UQE9pNNh7eyL8Q8Us848R},
	author = {Baira, Fya{\c c}al and Zidani M and Baudin, Thierry}
}
@proceedings {64968,
	title = {Influence du traitement de recuit sur la microstructure et les propri{\'e}t{\'e}s m{\'e}caniques et {\'e}lectriques d\&$\#$39;un fil de cuivre tr{\'e}fil{\'e} industriellement},
	journal = {4Th International Conference on Energy, Materials, Applied Energetics and pollution (ICEMAER{\textquoteright}18),At: Constantine , Alg{\'e}ria ,29th and 30th April },
	year = {2018},
	month = {2018},
	address = {Constantine , Alg{\'e}ria},
	author = {Fay{\c c}al, BAIRA and Zidani Mosbah and Messaoudi, Salim and Baudin, Thierry}
}
@proceedings {64966,
	title = {Multi-scale analysis by EBSD, X-ray diffraction and neutron diffraction of microstructure and texture of Al-Mg-Si aluminum alloy wires drawn and annealed; 27th Int.},
	journal = {METAL 2018},
	year = {2018},
	month = {2018},
	address = {Brno, Czech Republic},
	abstract = {
	The ENICAB company in Biskra uses the cold drawing process on several types of wires rod of different materials and grades. Our study was carried out on an Al-Mg-Si (AA6101) aluminum alloy wire rod, the most used by the ENICAB company in the manufacture of electrical energy transmission cables. The purpose of this work is to understand the evolution of the deformation texture and the stored energy in the grains during cold drawing of wire, as well as the combined influence of deformation and annealing at 400 {\textdegree}C during different holding time on recrystallization kinetics and evolution of local and global crystallographic texture. Characterization methods used in this work is: Optical Microscopy (OM), Scanning Electron Microscopy (SEM), Back Scatter Electron Diffraction (EBSD), X-ray diffraction, Neutron diffraction, Vickers microhardness and Chemical analysis by EDS.

},
	url = {https://www.researchgate.net/publication/340548811_MULTI-SCALE_ANALYSIS_BY_EBSD_X-RAY_DIFFRACTION_AND_NEUTRON_DIFFRACTION_OF_MICROSTRUCTURE_AND_TEXTURE_OF_AL-MG-SI_ALUMINUM_ALLOY_WIRES_DRAWN_AND_ANNEALED},
	author = {Zidani Mosbah and Bessais Lakhdar and Messaoudi Salim and Farh Hichem and Fay{\c c}al, BAIRA and Mathon Marie-H{\'e}l{\`e}ne and Helbert Anne-Laure and Brisset Fran{\c c}ois and Baudin, Thierry}
}
@proceedings {64964,
	title = {Study and characterization of the microstructure, crystallographic texture and mechanical properties of AGS aluminum alloy cold drawn wire},
	journal = { International Conference on Materials Science (ICMS2018),September 12-14 },
	year = {2018},
	month = {2018},
	address = {S{\'e}tif, Alg{\'e}rie},
	author = {Zidani Mosbah and Messaoudi S and BAIRA, Fay{\c c}al and Mathon Marie-H{\'e}l{\`e}ne and Baudin, Thierry}
}
@article {64532,
	title = {Deformation and Recrystallised Texture Evolution and the Followed Mechanical and Electrical Properties of Drawn and Annealed Copper Wires},
	journal = {International Journal of Engineering Research in AfricaInternational Journal of Engineering Research in Africa},
	volume = {31},
	year = {2017},
	month = {2017},
	pages = {20-28},
	abstract = {Copper destined for electrical cabling require a compromise of mechanical properties and electrical resistivity. The drawing process accompanied by the formation of crystalline defects, such as gaps and dislocations, which leads to the increase in hardness, and therefore to the increase in resistivity, a very important characteristic for the conductivity and the efficiency of the cable. The scope of this work is to investigate the phenomenon of deformation texture evolution while copper wire drawn destined for electric cable-making and to understand its relationship with the electrical conductivity. In this study, we notice that the hardness and the resistivity increase with an increase of the deformation level. On the other hand, a slight decrease in the resistivity of the wires was observed after a holding time of 30 min at 260{\textdegree}C. The annealing of wires at 260{\textdegree}C for 9 min of holding time leads to a recrystallisation especially for high deformations and a gradual return of the mechanical properties and of the microstructure towards a state close to the state of the wire rod with the extension of time . The recrystallization texture is composed of the same components as the drawing texture, fibers \&lt;111\&gt;//ND (Normal Direction) and \&lt;001\&gt;//ND. The decrease in the intensity of the fiber after annealing is observed. On the other hand, the fiber \&lt;001\&gt; // ND remains stable.},
	author = {Baira, Fya{\c c}al and Zidani, Mosbah and Farh, Hichem and Messaoudi, Salim and Ziar, Toufik and Helbert, Anne Laure and Baudin, Thierry}
}
