@article {93358,
	title = {STUDY AND PREDICTION OF THE FATIGUE LIFE OF AISI 1045 STEEL STRUCTURES UNDER ROTATIONAL BENDING STRESSES},
	journal = {UPB scientific bulletin series d mechanical engineering},
	volume = {84},
	number = {2},
	year = {2022},
	abstract = {
	Several difficulties and critical problems are facing the modern designers especially the unexpected damages. For such critical issues, the steel behavior{\textquoteright}s investigation presents a significant point to predict fatigue life through avoiding sudden damage. An experimental study has been conducted to evaluate the AISI 1045 steel fatigue behavior using three specimens{\textquoteright} shapes: the first one is the conventional shape according to the ASTM E466-07 standard, the second one is performed in a notched shape, and the last specimen according to the pre-loading process. To complete the comparison among the three cases studied, a mandatory checking of the chemical compositions such as carbon content 0.45\%, as well as the mechanical properties, have been investigated by preformed a tensile test in order to determine the maximum stress and the yield strength. The staircase method is employed to estimate and compare the endurance limit and its standard deviations for the three shapes. Moreover, and considered that the fatigue life expectancy of the AISI 1045 steel is a crucial step, the Stromeyer model has been proposed to predict the fatigue life which appears to be more effective, considering the average error for all cases compared to the experimental model.

},
	url = {https://www.scientificbulletin.upb.ro/rev_docs_arhiva/full156_421384.pdf},
	author = {YOUSFI, Hichem and Mourad Brioua and Benbouta, Rachid}
}
@conference {6931,
	title = {Computer Aided Inspection by Reverse Engineering for Reproduction of Gear Teeth},
	booktitle = {International Conference on Advanced Materials Mechanics \& Manufacturing},
	year = {2022},
	pages = {292{\textendash}298},
	publisher = {Advances in Mechanical Engineering and Mechanics II},
	organization = {Advances in Mechanical Engineering and Mechanics II},
	abstract = {In the industry, automated inspection is important for ensuring the high quality and allows acceleration of procedures for quality control of parts or mechanical assemblies. Although significant progress has been made in precision machining of complex surfaces, precision inspection of such surfaces remains a difficult problem. Thus the problem of the conformity of the parts of complex geometry is felt more and more. Motivated by the need to increase quality and reduce costs, and supported by the progress made in the field of it as well as the automation of production which in recent years has seen a considerable evolution in all these stages: from design to control through manufacturing. Due to, we used a 3D computer aided inspection technique on a physical gear using a coordinate measuring machine equipped with a {\textquotedblleft}PC-DMIS{\textquotedblright} measurement and inspection software. Our work consists in developing a procedure for inspection for reproduction of gear profile by reconstruction of a circle involute gear from a cloud point{\textquoteright}s measurement. In order to obtain a reliable result. In this works, we design the CAD-model of the part as accurately as possible (using a mathematical model) and matched with the 3D points cloud that represents the measurement that obtained from scanner. we compare the measurement cloud points from coordinate measurement machine with the mathematical model of construction by ICP (Iterative Closest Point) methods in order to obtain a conformed result and to show the impact of the dimensional inspection and geometric.},
	url = {https://link.springer.com/chapter/10.1007/978-3-030-86446-0_38},
	author = {Selloum, Rabia and Ameddah, Hacene and Mourad Brioua}
}
@proceedings {6992,
	title = {Computer Aided Inspection by Reverse Engineering for Reproduction of Gear Teeth},
	journal = {5th Tunisian Congress on Mechanics ~COTUME 2020 ~22 au 24 Mars},
	year = {2021},
	address = {Hammamet, Tunisia},
	abstract = {
	In the industry, automated inspection is important for ensuring the high quality and allows acceleration of procedures for quality control of parts or mechanical assemblies. Although significant progress has been made in precision machining of complex surfaces, precision inspection of such surfaces remains a difficult problem. Thus the problem of the conformity of the parts of complex geometry is felt more and more. Motivated by the need to increase quality and reduce costs, and supported by the progress made in the field of it as well as the automation of production which in recent years has seen a considerable evolution in all these stages: from design to control through manufacturing. Due to, we used a 3D computer aided inspection technique on a physical gear using a coordinate measuring machine equipped with a {\textquotedblleft}PC-DMIS{\textquotedblright} measurement and inspection software. Our work consists in developing a procedure for inspection for reproduction of gear profile by reconstruction of a circle involute gear from a cloud point{\textquoteright}s measurement. In order to obtain a reliable result. In this works, we design the CAD-model of the part as accurately as possible (using a mathematical model) and matched with the 3D points cloud that represents the measurement that obtained from scanner. we compare the measurement cloud points from coordinate measurement machine with the mathematical model of construction by ICP (Iterative Closest Point) methods in order to obtain a conformed result and to show the impact of the dimensional inspection and geometric.

},
	url = {https://link.springer.com/chapter/10.1007/978-3-030-86446-0_38},
	author = {Selloum, Rabia and Ameddah, Hacene and Mourad Brioua}
}
@conference {6932,
	title = {Inspection on a Three-Dimensional Measuring Machine for a Virtual Model for Additive Manufacturing},
	booktitle = {International Conference on Advances in Mechanical Engineering and Mechanics},
	year = {2021},
	pages = {138{\textendash}143},
	publisher = {Advances in Mechanical Engineering, Materials and Mechanics},
	organization = {Advances in Mechanical Engineering, Materials and Mechanics},
	abstract = {Today, and to quickly meet the high demands of variability, supply chain efficiency and energy optimization, business markets are looking for modern manufacturing technologies and as a solution, industry 4.0 is using the benefits of integrating modern manufacturing technologies and information systems to promote production capabilities. In this context, intelligent industry represents a new generation of automatic production systems based on the concepts of intelligent industry, intelligent manufacturing, control and intelligent inspection, such as inspection on coordinate measuring machines (CMMs). This technology allows many machines to be integrated into a plant and controlled online using the MBD (Model Based Design) quality system. The problem of conformity of parts with complex geometry is becoming more and more important. The objective of this work is to present a 3D inspection technique on a virtual model (MBD: Model Based Design), using a coordinate measuring machine equipped with a {\textquotedblleft}POWER INSPECT{\textquotedblright} measurement and inspection software. The interest of this technique is to show the impact of the dimensional inspection and geometric tolerance process of the CAD model for the CAI (Computer aided Inspection) approach on the fidelity of the finished product for additive manufacturing (AM) including intelligent industry.},
	url = {https://link.springer.com/chapter/10.1007/978-3-030-52071-7_20},
	author = {Ameddah, Hacene and Selloum, Rabia and Mourad Brioua}
}
@proceedings {62546,
	title = {Computer Aided Inspection by Reverse Engineering for Reproduction of Gear Teeth},
	journal = {International Conference on Advanced Materials Mechanics \& Manufacturing},
	year = {2021},
	month = {2021},
	pages = {292-298},
	publisher = {Springer},
	address = {Tunisia},
	abstract = {In the industry, automated inspection is important for ensuring the high quality and allows acceleration of procedures for quality control of parts or mechanical assemblies. Although significant progress has been made in precision machining of complex surfaces, precision inspection of such surfaces remains a difficult problem. Thus the problem of the conformity of the parts of complex geometry is felt more and more. Motivated by the need to increase quality and reduce costs, and supported by the progress made in the field of it as well as the automation of production which in recent years has seen a considerable evolution in all these stages: from design to control through manufacturing. Due to, we used a 3D computer aided inspection technique on a physical gear using a coordinate measuring machine equipped with a {\textquotedblleft}PC-DMIS{\textquotedblright} measurement and inspection software. Our work consists in developing a procedure for inspection for reproduction of gear profile by reconstruction of a circle involute gear from a cloud point{\textquoteright}s measurement. In order to obtain a reliable result. In this works, we design the CAD-model of the part as accurately as possible (using a mathematical model) and matched with the 3D points cloud that represents the measurement that obtained from scanner. we compare the measurement cloud points from coordinate measurement machine with the mathematical model of construction by ICP (Iterative Closest Point) methods in order to obtain a conformed result and to show the impact of the dimensional inspection and geometric.},
	url = {https://link.springer.com/chapter/10.1007/978-3-030-86446-0_38},
	author = {Selloum, Rabia and Ameddah, Hacene and Mourad Brioua}
}
@article {6930,
	title = {CUTTING TOOL LIFE AND ITS EFFECT ON SURFACE ROUGHNESS WHEN TURNING WITH WC-6\% CO},
	journal = {International Journal of Modern Manufacturing Technologies},
	volume = {XII},
	number = {2},
	year = {2020},
	abstract = {During turning operations, tool-part-chip contact causes wear to the cutting tool. The objective of this work is to study the wear of the clearance faces of tungsten carbide cutting tools during turning operations. Experimental tests on tool life for dry turning operations were carried out at four different cutting speeds, where the feed rate and the depth of cut are kept at constant values: 0.08 mm/rev for feed rate and 0.5 mm for depth of cut. An analysis of the influence of cutting parameters on the tools wear and consequently tool life (Τ) was presented, then the roughness of the machined surface Ra and the morphology of the chips produced were studied. This study makes it possible to identify that the wear mechanisms and the tool life are strongly linked to the roughness of the machined surfaces and to the morphology of the chips produced during the turning operations.},
	url = {https://modtech.ro/international-journal/vol12no22020/01_Mourad_Bendifallah.pdf},
	author = {Bendifallah, Mourad and Mourad Brioua and Belloufi, Abderrahim}
}
@proceedings {6991,
	title = {Improvement Inspection Method for Rapid Prototyping of an involute spur gears for an Additive Manufacturing process.},
	journal = {International Conference on 3D Printing and Additive Manufacturing November 23-24, Webinar, From your imagination to a 3D model},
	year = {2020},
	address = {Dubai, UAE},
	author = {Selloum, Rabia and Ameddah, Hacene and Mourad Brioua}
}
@conference {6976,
	title = {Inspection on a Three-Dimensional Measuring Machine for a Virtual Model for Additive Manufacturing},
	booktitle = {International Conference on Advances in Mechanical Engineering and Mechanics},
	year = {2020},
	pages = {138{\textendash}143},
	address = {Advances in Mechanical Engineering, Materials and Mechanics},
	abstract = {Today, and to quickly meet the high demands of variability, supply chain efficiency and energy optimization, business markets are looking for modern manufacturing technologies and as a solution, industry 4.0 is using the benefits of integrating modern manufacturing technologies and information systems to promote production capabilities. In this context, intelligent industry represents a new generation of automatic production systems based on the concepts of intelligent industry, intelligent manufacturing, control and intelligent inspection, such as inspection on coordinate measuring machines (CMMs). This technology allows many machines to be integrated into a plant and controlled online using the MBD (Model Based Design) quality system. The problem of conformity of parts with complex geometry is becoming more and more important. The objective of this work is to present a 3D inspection technique on a virtual model (MBD: Model Based Design), using a coordinate measuring machine equipped with a {\textquotedblleft}POWER INSPECT{\textquotedblright} measurement and inspection software. The interest of this technique is to show the impact of the dimensional inspection and geometric tolerance process of the CAD model for the CAI (Computer aided Inspection) approach on the fidelity of the finished product for additive manufacturing (AM) including intelligent industry.},
	url = {https://link.springer.com/chapter/10.1007/978-3-030-52071-7_20},
	author = {Ameddah, Hacene and Selloum, Rabia and Mourad Brioua}
}
@proceedings {6985,
	title = {Inspection sur une machine {\`a} mesurer tridimensionnelle en vue d\&rsquo;un tol{\'e}rancement d\&rsquo;un mod{\`e}le virtuel pour la fabrication additive,},
	journal = {Congres Alg{\'e}rien de M{\'e}canique CAM2019 Ghardaia 23-26 F{\'e}vrier},
	year = {2020},
	author = {Selloum, Rabia and Ameddah, Hacene and Mourad Brioua}
}
@proceedings {6990,
	title = {Non-Destructive Evaluation for an Exactitude Reproduction of Form by Reverse Engineering in an Additive Manufacturing Process.},
	journal = {ASTM International Conference on Additive Manufacturing ICAM2020, November 16-20, Webinar},
	year = {2020},
	author = {Selloum, Rabia and Ameddah, Hacene and Mourad Brioua}
}
@conference {6933,
	title = {OPTIMAL SHAPE REPRODUCTION OF AN INTERVERTEBRAL PROSTHESIS \&ldquo;COFLEX\&rdquo; FOR ADDITIVE MANUFACTURING},
	booktitle = {7th International Conference Integrity-Reliability-Failure},
	year = {2020},
	pages = {487-488},
	publisher = {J.F. Silva Gomes and S.A. Meguid (editors), INEGI-FEUP},
	organization = {J.F. Silva Gomes and S.A. Meguid (editors), INEGI-FEUP},
	abstract = {The coflex Interlaminar Technology is an interlaminar stabilization device indicated for use in one or two level lumbar stenosis from L1-L5. It is used in skeletally mature patients with at least moderate impairment in function who experience relief in flexion from their symptoms of leg/buttocks/groin pain, with or without back pain, and who have undergone at least 6 months of non-operative treatment. Our study is focused on the evaluation and biomechanical analysis of osteosynthesis implants and in particular the Corflex-F implant to redefine a new approach to the "Coflex" interspinatus implant using particles swarm optimisation for additive manufacturing, then to study these biomechanical performances.},
	url = {https://paginas.fe.up.pt/~irf/Proceedings_IRF2020/data/papers/17493.pdf},
	author = {Ameddah, Hacene and Mourad Brioua}
}
@proceedings {6996,
	title = {Optimal shape reproduction of an intervertebral prosthesis \&ldquo;COFLEX\&rdquo; for additive manufacturing},
	journal = {7th International Conference Integrity-Reliability-Failure. J.F. Silva Gomes and S.A. Meguid (editors), INEGI-FEUP (2020),},
	year = {2020},
	pages = {487-488},
	author = {Amaddah, Hacene and Mourad Brioua}
}
@article {63124,
	title = {Cutting Tool Life And Its Effect On Surface Roughness When Turning With WC-6\% CO},
	journal = {International Journal of Modern Manufacturing TechnologiesInternational Journal of Modern Manufacturing Technologies},
	volume = {12},
	year = {2020},
	month = {2020},
	pages = {7-16},
	author = {Bendifallah, Mourad and Mourad Brioua and Belloufi, Abderrahim}
}
@proceedings {61442,
	title = {OPTIMAL SHAPE REPRODUCTION OF AN INTERVERTEBRAL PROSTHESIS \&ldquo;COFLEX\&rdquo; FOR ADDITIVE MANUFACTURING},
	year = {2020},
	author = {Ameddah, Hacene and Mourad Brioua}
}
@proceedings {63573,
	title = {Inspection on a Three-Dimensional Measuring Machine for a Virtual Model for Additive Manufacturing},
	journal = {International Conference on Advances in Mechanical Engineering and Mechanics},
	year = {2019},
	month = {2019},
	pages = {138-143},
	publisher = {Springer},
	author = {Ameddah, Hacene and Selloum, Rabia and Mourad Brioua}
}
@article {64467,
	title = {Biomechanical Characterization of Failure the 316L Stainless Steel for Femoral Compression Plates},
	journal = {Journal of Biomimetics, Biomaterials and Biomedical Engineering },
	volume = {34},
	year = {2017},
	month = {2017},
	pages = {68-74},
	publisher = {Trans Tech Publ},
	abstract = {
	The aim of this paper is to examine a premature breakage of two compression plates for fixing broken bones with different patients for the period of their recovery. Each compression plate{\textquoteright}s breakage can induce grave consequences such as a new surgery, unexpected undesired complications and a prolonged healing time. The investigation of the compression plate breakage causes required an examination of the chemical composition and steel hardness, metallographic examination as well as that of the compression plate breakage surface by means of macroscopic and microscopic observations using microscope. On the origin of the results it can be established that the breakage was caused by high static load.

},
	isbn = {3-0357-1334-0},
	url = {https://www.scientific.net/jbbbe.34.68},
	author = {Boukhobza, Abdelyamine and Mourad Brioua and Benaicha, Smail and FEDAOUI, Kamel}
}
@proceedings {64466,
	title = {Biomechanical Characterization of Failure the 316L Stainless Steel for Femoral Compression Plates},
	journal = {Journal of Biomimetics, Biomaterials and Biomedical EngineeringJournal of Biomimetics, Biomaterials and Biomedical Engineering},
	volume = {34},
	year = {2017},
	month = {2017},
	pages = {68-74},
	publisher = {Trans Tech Publ},
	isbn = {3-0357-1334-0},
	author = {Boukhobza, Abdelyamine and Mourad Brioua and Benaicha, Smail and FEDAOUI, Kamel}
}
@article {64446,
	title = {Characterisation of Mo\&ndash;V\&ndash;N Coatings Deposited on XC100 Substrate by Sputtering Cathodic Magnetron},
	journal = {Металлофизика и новейшие технологииМеталлофизика и новейшие технологии},
	year = {2017},
	month = {2017},
	author = {Chermime, Brahim and Abboudi, Abdelaziz and Djebaili, Hamid and Mourad Brioua}
}
@article {64445,
	title = {Characterisation of Mo{\textendash}V{\textendash}N Coatings Deposited on XC100 Substrate by Sputtering Cathodic Magnetron},
	journal = {Металлофизика и новейшие технологииМеталлофизика и новейшие технологии},
	year = {2017},
	month = {2017},
	isbn = {1024-1809},
	author = {Chermime, Brahim and Abboudi, Abdelaziz and Djebaili, Hamid and Mourad Brioua}
}
@article {64601,
	title = {Characterization of the Microstructural and Mechanical Properties of MoZrN Coating},
	journal = {Journal of Nano-and Electronic PhysicsJournal of Nano-and Electronic Physics},
	volume = {9},
	year = {2017},
	month = {2017},
	pages = {1014-1},
	isbn = {2077-6772},
	author = {Abboudi, Abdelaziz and Chermime, Brahim and Djebaili, Hamid and Mourad Brioua}
}
@article {64599,
	title = {Erratum: Effect of MoZrN Coating on a Steel XC100 [Metallofiz. Noveishie Tekhnol., 38, No. 7: 903{\textendash}909 (2016},
	journal = {Металлофизика и новейшие технологииМеталлофизика и новейшие технологии},
	year = {2017},
	month = {2017},
	isbn = {1024-1809},
	author = {Abboudi, Abedelaziz and Meddour, Belkacem and Chermime, Brahim and Djebaili, Hamid and Mourad Brioua}
}
@article {64216,
	title = {Hygromechanical characterization of glass fiber reinforced polyamide composites behavior},
	journal = {REVUE DES COMPOSITES ET DES MATERIAUX AVANCES-JOURNAL OF COMPOSITE AND ADVANCED MATERIALSREVUE DES COMPOSITES ET DES MATERIAUX AVANCES-JOURNAL OF COMPOSITE AND ADVANCED MATERIALS},
	volume = {27},
	year = {2017},
	month = {2017},
	pages = {231-247},
	isbn = {1169-7954},
	author = {OBEID, HASSAN and CL{\'E}MENT, ALEXANDRE and FR{\'E}OUR, SYLVAIN and JACQUEMIN, FR{\'E}D{\'E}RIC and CASARI, PASCAL and Djilali, Kaid-Ameur and MANSOURI, KHELIFA and Djebaili, Hamid and Mourad Brioua and TRAGANGOON, ARRUCK}
}
@article {64276,
	title = {The influence of fiber arrangement on the mechanical properties of short fiber reinforced thermoplastic matrix composite},
	journal = {Revue des Composites et des Materiaux AvancesRevue des Composites et des Materiaux Avances},
	volume = {27},
	year = {2017},
	month = {2017},
	pages = {261},
	author = {Mansouri, Khalifa and Djebaili, Hamid and Mourad Brioua}
}
@article {64600,
	title = {Mechanical and Structural Studies of Ternary Mo{\textendash}Zr{\textendash}N Layers Deposited on Substrate by PVD},
	journal = {Металлофизика и новейшие технологииМеталлофизика и новейшие технологии},
	year = {2017},
	month = {2017},
	isbn = {1024-1809},
	author = {Abboudi, Abdelaziz and Chermime, Brahim and Djebaili, Hamid and Mourad Brioua}
}
@article {61636,
	title = {The influence of fiber arrangement on the mechanical properties of short fiber reinforced thermoplastic matrix composite},
	year = {2017},
	author = {OBEID, HASSAN and CL{\'E}MENT, ALEXANDRE and FR{\'E}OUR, SYLVAIN and JACQUEMIN, FR{\'E}D{\'E}RIC and CASARI, PASCAL and MANSOURI, KHELIFA and Djebaili, Hamid and Mourad Brioua and TRAGANGOON, ARRUCK and PATAMAPROHM, BARAMEE}
}
@article {61428,
	title = {Mechanical and Structural Studies of Ternary Mo\&ndash;Zr\&ndash;N Layers Deposited on Substrate by PVD},
	year = {2017},
	author = {Abboudi, Abdelaziz and Chermime, Brahim and Djebaili, Hamid and Mourad Brioua}
}
@article {65679,
	title = {Effect of MoZrN Coating on a Steel XC100},
	journal = {Металлофизика и новейшие технологииМеталлофизика и новейшие технологии},
	year = {2016},
	month = {2016},
	author = {Abboudi, Abedelaziz and Meddour, Belkacem and Chermime, Brahim and Djebaili, Hamid and Mourad Brioua}
}
@article {65369,
	title = {The effect of the elastic fields caused by a networks of dislocations placed at interfaces of a three-layer material Cu/Cu/(001) Fe in the case of anisotropic elasticity},
	journal = {Arabian Journal for Science and EngineeringArabian Journal for Science and Engineering},
	volume = {41},
	year = {2016},
	month = {2016},
	pages = {1955-1960},
	author = {Makhloufi, Rafik and Mourad Brioua and Benbouta, Rachid}
}
@article {65675,
	title = {Experimental and Numerical Study of the Cutting Temperature during the Turning of the C45 Steel},
	journal = {Applied Mechanics and Materials},
	volume = {823},
	year = {2016},
	month = {2016},
	pages = {507-512},
	publisher = {Trans Tech Publ},
	abstract = {
	In machining operation, the quality of surface finish is an important requirement for many turned work pieces. cutting temperature is one of the most important parameters in determining the cutting performance and tool life. the objective for this work is to estimate the cutting temperature in 3D model on tool-chip interface and the interface temperature during turning process, using the digital simulation software COMSOL Multiphysics.The tool{\textendash}chip interface temperature results obtained from experimental results by using C45 medium carbon steel work piece with natural contact tools, without the application of cooling and lubricating agents and a K type thermocouple technique was used for estimating cutting temperatures in a turning operation.This procedure facilitates the determination of the temperature at tool-chip interface in dry turning process, which is still a challenge for existing experimental and numerical methods.

},
	isbn = {3-03835-566-6},
	url = {https://www.scientific.net/AMM.823.507},
	author = {Abdelkrim, Mourad and Mourad Brioua and Belloufi, Abderrahim and Gherfi, Abdelhafid}
}
@proceedings {65674,
	title = {Experimental and Numerical Study of the Cutting Temperature during the Turning of the C45 Steel},
	journal = {Applied Mechanics and MaterialsApplied Mechanics and Materials},
	volume = {823},
	year = {2016},
	month = {2016},
	pages = {507-512},
	publisher = {Trans Tech Publ},
	isbn = {3-03835-566-6},
	author = {Abdelkrim, Mourad and Mourad Brioua and Belloufi, Abderrahim and Gherfi, Abdelhafid}
}
@article {66031,
	title = {An efficient contour parallel tool path generation for arbitrary pocket shape without uncut regions},
	journal = {International Journal of Precision Engineering and ManufacturingInternational Journal of Precision Engineering and Manufacturing},
	volume = {16},
	year = {2015},
	month = {2015},
	pages = {1157-1169},
	isbn = {2005-4602},
	author = {Elhachemi Bahloul and Mourad Brioua and Cherif Rebiai}
}
@proceedings {67539,
	title = {Anisotropic Effect and the Crystals Nature on the Elastic Fields Dispersal Generated in a Three Layers Material},
	journal = {Advanced Materials ResearchAdvanced Materials Research},
	volume = {83},
	year = {2010},
	month = {2010},
	pages = {1069-1075},
	publisher = {Trans Tech Publ},
	isbn = {0-87849-297-6},
	author = {Mourad Brioua and Benbouta, Rachid and Zidani, Kamel}
}
@proceedings {67538,
	title = {EFFECT OF ANISOTROPY ON THE ELASTIC FIELD NEAR THE FREE SURFACE OF A THREE-LAYER HETEROSTRUCTURE},
	journal = {Annales de chimie},
	volume = {35},
	year = {2010},
	month = {2010},
	pages = {187-194},
	publisher = {Lavoisier},
	isbn = {0151-9107},
	author = {Mourad Brioua and Benbouta, Rachid and Zidani, Kamel}
}
@proceedings {67713,
	title = {ETUDE DE L{\textquoteright}EFFET DE L{\textquoteright}OXYGENE SUR LA RESTAURATION ET LA RECRISTALLISATION DU ZIRCONIUM},
	journal = {Annales de chimie},
	volume = {34},
	year = {2009},
	month = {2009},
	pages = {289-296},
	publisher = {Lavoisier},
	isbn = {0151-9107},
	author = {Benbouta, Rachid and Mihi, Abdelkader and Abbassi, Ammar and Mourad Brioua and Adami, Lahbib}
}
@article {67714,
	title = {Study of the effect of oxygen for the recovery and recrystallization of zirconium},
	journal = {Annales de Chimie. Science des Materiaux (Paris)Annales de Chimie. Science des Materiaux (Paris)},
	volume = {34},
	year = {2009},
	month = {2009},
	pages = {289-296},
	author = {Benbouta, Rachid and Mihi, Abdelkader and Abbassi, Ammar and Mourad Brioua and Adami, Lahbib}
}
@article {61951,
	title = {Numerical simulation of the anisotropic elastic field generated by a misfit dislocations along a NiSi2/Si/(001) GaAs heterotwin interface},
	journal = {Journal of colloid and interface scienceJournal of colloid and interface science},
	volume = {282},
	year = {2005},
	month = {2005},
	pages = {120-123},
	isbn = {0021-9797},
	author = {Mourad Brioua and Benbouta, Rachid and MADANI, Salah and Adami, Lahbib}
}
@article {61940,
	title = {The stress field of a dislocation array in an ultra thin anisotropic heterogeneous bicrystal},
	journal = {physica status solidi (a)physica status solidi (a)},
	volume = {202},
	year = {2005},
	month = {2005},
	pages = {2462-2466},
	isbn = {1862-6300},
	author = {Benbouta, Rachid and Mihi, Abdelkader and Mourad Brioua and MADANI, Salah and Adami, Lahbib}
}
