@article {7204,
	title = {ProgNet: A Transferable Deep Network for Aircraft Engine Damage Propagation Prognosis under Real Flight Conditions},
	journal = {Aerospace},
	volume = {10},
	number = {1},
	year = {2023},
	abstract = {Machine learning prognosis for condition monitoring of safety-critical systems, such as aircraft engines, continually faces challenges of data unavailability, complexity, and drift. Consequently, this paper overcomes these challenges by introducing adaptive deep transfer learning methodologies, strengthened with robust feature engineering. Initially, data engineering encompassing: (i) principal component analysis (PCA) dimensionality reduction; (ii) feature selection using correlation analysis; (iii) denoising with empirical Bayesian Cauchy prior wavelets; and (iv) feature scaling is used to obtain the required learning representations. Next, an adaptive deep learning model, namely ProgNet, is trained on a source domain with sufficient degradation trajectories generated from PrognosEase, a run-to-fail data generator for health deterioration analysis. Then, ProgNet is transferred to the target domain of obtained degradation features for fine-tuning. The primary goal is to achieve a higher-level generalization while reducing algorithmic complexity, making experiments reproducible on available commercial computers with quad-core microprocessors. ProgNet is tested on the popular New Commercial Modular Aero-Propulsion System Simulation (N-CMAPSS) dataset describing real flight scenarios. To the extent we can report, this is the first time that all N-CMAPSS subsets have been fully screened in such an experiment. ProgNet evaluations with numerous metrics, including the well-known CMAPSS scoring function, demonstrate promising performance levels, reaching 234.61 for the entire test set. This is approximately four times better than the results obtained with the compared conventional deep learning models.},
	url = {https://www.mdpi.com/2226-4310/10/1/10},
	author = {Berghout, Tarek and Mouss, Mohamed-Djamel and Mouss, Leila-Hayet and Benbouzid, Mohamed}
}
@proceedings {7279,
	title = {Use of Petri Nets to Model the Maintenance of Multi Site Compagny},
	journal = {International Congress of Energies and Engineering of Industrial ProcessesCEGPI{\textquoteright}22 23 - 25 May},
	year = {2022},
	address = {Algiers, Algeria},
	author = {Soltani, Khaoula and Benzouai, Messaoud and Mouss, Mohamed-Djamel}
}
@article {7212,
	title = {Enhancement of value stream mapping application process through using fuzzy DEMATEL and fuzzy QFD approaches: a case study considering economic and environmental perspectives},
	volume = {16},
	number = {3},
	year = {2020},
	abstract = {Purpose This paper aims to investigate an integrated approach that aims at enhancing the application process of value stream mapping (VSM) method. It also proposes an extended VSM called Economic and Environmental VSM(E-EVSM). The proposed approach highlights the improvement of economic and environmental performances. Design/methodology/approach The proposed approach has studied the integration of VSM, fuzzy decision-making trial and evaluation laboratory (DEMATEL) and fuzzy quality function deployment (QFD) to improve the economic and environmental performances of manufacturing processes. The VSM method is used for data collection and manufacturing process assessment, whereas fuzzy DEMATEL is used to analyse the current state map. Finally, fuzzy QFD is used to organize the improvement phase of VSM method. Findings The clear findings of this research prove the effectiveness of VSM method on the environmental and economic performances of manufacturing processes. In addition, the proposed approach will show the advantages of fuzzy DEMATEL and fuzzy QFD approaches in improving the application of the VSM method. Research limitations/implications The limitation of this study includes the lack of consideration of other dimensions such as social, technological and managerial. In addition, the proposed approach studied an average set of environmental and economic indicators. Originality/value The novelty of the proposed approach is proved by the development of an extended VSM method (E-EVSM). Also, the proposed approach contributes by a new methodology for analysing and improving the current state map of manufacturing processes.},
	url = {Journal of Modelling in Management},
	author = {Aouag, Hichem and Soltani, Mohyiddine and Mouss, Mohamed-Djamel}
}
@article {7211,
	title = {HARDWARE IMPLEMENTATION USING XSG OF NEW FAULT DETECTION METHOD APPLIED TO ROBOT MANIPULATOR},
	journal = {Mechatronic Systems and Control},
	year = {2020},
	abstract = {This paper presents a new hardware implementation of a supervision system used in robot manipulators with two degrees of freedom. In addition to the simulation results, the new System Generator tool of Xilinx r is used to ensure self-generation of HDL codes. This code is used to configure field programmable gate arrays (FPGA) devices in the loop, and the supervision system is used mainly to ensure real-time reconfiguration of robots. In the proposed system, we used a new fault detection (FD) method for a viscous friction fault in the supervised robot combined with a fault-tolerance control method. The first module, based on residual analysis, is used to FD and to properly estimate the necessary corrections of the second module. For data transmission between the supervisor and the supervised robots, we used an approach based on the transmission control protocol. The simulation results show that the proposed method adjusts the fault effect using information transferred from the remote supervisor robot. The hardware implementation generated using Xilinx r System Generator is used to validate the proposed contribution and to ensure real-time processing in the case of industrial robots. The simulation results and the response times of both proposed systems are compared and discussed.},
	url = {https://www.actapress.com/Abstract.aspx?paperId=47131},
	author = {Ghrieb, Abdel-O and Kourd, Yahia and Messaoudi, Kamel and Mouss, Mohamed-Djamel and Bakir, Toufik}
}
@proceedings {64223,
	title = {Automatic text summarization: A review},
	journal = {EKNOW 2017 International Conference on Information, Process, and Knowledge Management },
	year = {2017},
	month = {2017},
	address = {Nice, France},
	abstract = {
	As we move into the 21st century, with very rapid mobile communication and access to vast stores of information, we seem to be surrounded by more and more information, with less and less time or ability to digest it. The creation of the automatic summarization was really a genius human solution to solve this complicated problem. However, the application of this solution was too complex. In reality, there are many problems that need to be addressed before the promises of automatic text summarization can be fully realized. Basically, it is necessary to understand how humans summarize the text and then build the system based on that. Yet, individuals are so different in their thinking and interpretation that it is hard to create "gold-standard" summary against which output summaries will be evaluated. In this paper, we will discuss the basic concepts of this topic by giving the most relevant definitions, characterizations, types and the two different approaches of automatic text summarization: extraction and abstraction. Special attention is devoted to the extractive approach. It consists of selecting important sentences and paragraphs from the original text and concatenating them into shorter form. Broadly, the importance of sentences is decided based on statistical features of sentences. This approach avoids any efforts on deep text understanding. It is conceptually simple and easy to implement. KeywordsText summarization; Automatic text summarization; Abstractive approach; Extractive approach; Natural language processing.

},
	url = {https://www.semanticscholar.org/paper/Automatic-Text-Summarization\%3A-A-review-Zerari-Aitouche/92b1aae479e032577ee34a428cba2e74c5274901},
	author = {Naima, Zerari and Samia, Aitouche and Mouss, Mohamed-Djamel and Asma Yaha}
}
@proceedings {64173,
	title = {Intellectual capital and its measurement},
	journal = {IEOM 2017 Industrial Engineering and Operations Management 11-13 Avril },
	year = {2017},
	month = {2017},
	address = {Rabat, Marocco},
	abstract = {
	Intellectual Capital is gaining importance in today{\textquoteright}s knowledge economy and plays a vital role in innovation, productivity growth, performance and competitiveness of organizations. The Intellectual Capital may include the following areas: human resources, organizational structure and processes, research and development, technology and rights related to intellectual property, and consumer networks and software providers. The purpose of this work is to measure the intellectual capital in an Algerian organization (or production system) using the Weightless Wealth Tool Kit {\textquotedblleft}WWTK{\textquotedblright}. The results of the intellectual capital measurement are supplemented by traditional financial ratios. The measurement was applied to the National Company of wells Services (ENSP) in Hassi Messaoud city, in south of Algeria. We calculated the intellectual capital (intangible resources) of the ENSP to help the organization to better capitalize on its potential of workers and their know-how. The intangible value of the ENSP is evaluated at 16,936,173,345 DA in 2015.

},
	url = {https://d1wqtxts1xzle7.cloudfront.net/81016910/53-libre.pdf?1645259116=\&response-content-disposition=inline\%3B+filename\%3DIntellectual_capital_and_its_measurement.pdf\&Expires=1653384550\&Signature=caP9MKVvUPbht7kiDevKKLMboPxJcjlzN9oE7U9MKLEzSYjiNGzmzl33sHo},
	author = {Samira Brahmi and Samia Aitouche and Mouss, Mohamed-Djamel}
}
@proceedings {64175,
	title = {Keyword analysis of intellectual capital and knowledge management in SCOPUS},
	journal = {eKNOW 2017, The Ninth International Conference on Information, Process, and Knowledge Management },
	year = {2017},
	month = {2017},
	address = {Nice, France},
	abstract = {
	The aim of this paper is to perform a keyword analysis in two areas of research: Intellectual Capital and Knowledge Management. The keywords are of three types : keywords proposed by the authors in their articles, the keywords that users use in their queries and the densest words existing in a textual corpus. Zipf{\textquoteright}s law usually applied for natural language is applied in this work for scientifc corpus constituted of confused full articles in each area. We wrote 8 R programs going through titles of articles, authors{\textquoteright} keywords, abstracts and full articles to calculate frequencies and interpret them. The keywords of intellectual capital measurement and diclosure have the highest frequencies. The measures are stated by companies in annual reports and could not be integrated in their balance sheets because the classical accounting does not take into acount intellectual capital as an asset. Knowledge management is more oriented towards the capitalization of knowledge to improve business performance and for industries. This work is the first in keyword analysis for the two areas. It could be usefull to prepare glossaries, ontologies and all semantic reasearhes of research areas.

},
	url = {https://www.thinkmind.org/index.php?view=article\&articleid=eknow_2017_2_20_60006},
	author = {Aitoche, Samia and Laggoune, Assia and Titah, Mawloud and Mouss, Mohamed-Djamel and Naima Zerari and Latreche, Khaled and Kanit, Akila and KAANIT, Abdelghafour}
}
