@article {93283,
	title = {ECG signal denoising by fractional wavelet transform thresholding},
	journal = {Research on Biomedical Engineering},
	volume = {36},
	year = {2020},
	pages = {349{\textendash}360},
	abstract = {
	Introduction



	The analysis of electrocardiogram (ECG) signals allows experts to diagnose several cardiac disorders. However, the accuracy of such diagnosis depends heavily on the signal quality. In this paper, an efficient method based on fractional wavelet decomposition coupled with thresholding techniques is proposed for noise removal.



	Methods



	The usual low-pass and high-pass filters of the wavelet transform are replaced by fractional-order ones. Thus, fractional wavelets are proposed, simulated, and compared to other wavelets for ECG denoising. The denoising process was made operational by the means of an appropriate choice of the wavelet transform coefficient thresholding and the wavelet decomposition level of the signal.



	Results



	Considering the relative error metrics, the best wavelet function for efficient denoising is the fractional one. In our study, we have used eight real ECG signals from the Physionet MITBIH. In order to prove the effectiveness of our method, we investigated the filtering of two types of noises, namely Gaussian white noise and power-line interference (PLI) noise. The proposed method removed the Gaussian white noise completely and had better performance on the PLI noise. Considering classical metrics of assessment, results show the advantage of the proposed method compared to other types of wavelets.



	Conclusion



	The proposed method is the most suitable one for removing PLI and Gaussian white noise from ECG signals with superior performance than other wavelets. Also, it can be applied for high-frequency denoising even without a priori frequency knowledge.

},
	url = {https://doi.org/10.1007/s42600-020-00075-7 },
	author = {Houamed, Haroune and Saidi, Lamir and Srairi, Fawzi}
}
@article {7808,
	title = {A conceptual framework for risk matrix capitalization},
	journal = {International Journal of System Assurance Engineering and Management},
	volume = {11},
	year = {2020},
	pages = {755{\textendash}764},
	abstract = {Research on risk matrices show that there is considerable diversity in the practice of designing risk matrices. This has led to serious problems of standardization and communication. Indeed, these problems affect at the same time on the development of matrices and in their exploitation in term of risk assessment. To solve these problems, this paper proposes an experience feedback method that aims to capitalize the feedback invariants resulting from the analysis of existing risk matrices. This capitalization allows developing a theoretical framework of the robust risk matrices design. The application of the proposed method for examples of matrices confirms the interest of articulating these risk matrices designs through an argument based on experience feedback. In this sense, the merit of the proposed experience feedback method is that it promotes the sharing of knowledge between the actors involved in a risk assessment.},
	url = {https://link.springer.com/article/10.1007/s13198-020-00949-0},
	author = {Hefaidh Hadef and M{\'e}barek Djebabra}
}
@article {7809,
	title = {Contribution to the ageing control of onshore oil and gas fields},
	journal = {Petroleum},
	volume = {6},
	number = {3},
	year = {2020},
	pages = {311-317},
	abstract = {The ageing of the Algerian oil and gas (O\&amp;G) installations has led to many incidents. Such installations are over 30 years old (life cycle) and still in operation. To deal with this O\&amp;G crucial problem, the Algerian authorities have launched a rehabilitation and modernization schedule of these installations. Within the framework of this program, many audit operations are initiated to elaborate a general diagnosis of the works to be performed while optimizing production. In other words, industrial ageing risks shall be controlled. In the\&nbsp;process safety management\&nbsp;(PSM) context, the aim of this paper is to study ageing problem of the Algerian industrial installations through proposed indicators. Their prioritization adjusted by (TOPSIS) Technique for Order-Preference by Similarity to Ideal Solution method which allows identification of ageing control solutions of Algerian onshore fields.},
	url = {https://www.sciencedirect.com/science/article/pii/S240565611930063X},
	author = {Yacine Belmazouzi and M{\'e}barek Djebabra and Hefaidh Hadef}
}
@article {7810,
	title = {Decision making under uncertainty in the alarm systems response},
	journal = {International Journal of Quality \& Reliability Management},
	volume = {37},
	number = {8},
	year = {2020},
	pages = {1151-1161},
	abstract = {Purpose The purpose of this paper is to develop an advanced decision-making support for the appropriate responding to critical alarms in the hazardous industrial facilities. Design/methodology/approach A fuzzy analytical hierarchy process is suggested by considering three alternatives and four criteria using triangular fuzzy numbers to handle the associated uncertainty. A logarithmic fuzzy preference programming (LFPP)-based nonlinear priority method is employed to analyze the suggested model. Findings A quantitative decision-making support is not only a necessity in responding to critical alarms but also easy to implement even in a relatively short reaction time. Confirmation may not be the appropriate option to deal with a critical alarm, even with the availability of the needed resources. Practical implications A situation related to a flammable gas alarm in a gas plant is treated using the developed model showing its practical efficiency and practicality. Originality/value The proposed model provides a rational, simple and holistic fuzzy multi criteria tool with a refined number of criteria and alternatives using an LFPP method to handle process alarms.},
	url = {https://www.emerald.com/insight/content/doi/10.1108/IJQRM-03-2019-0078/full/html},
	author = {Mohammed, Antar Si and Smail, Rachid and Chebila, Mourad}
}
@article {7811,
	title = {A design approach towards sustainable buildings in Algeria},
	journal = {Smart and Sustainable Built Environment},
	volume = {9},
	number = {3},
	year = {2020},
	pages = {229-245},
	abstract = {Purpose The purpose of this paper is to achieve the national strategic agenda{\textquoteright}s criteria that aim for accomplishing sustainable buildings by estimating the effects of energy efficiency measures in order to reduce energy consumption and CO2\&nbsp;emission. Design/methodology/approach A design approach has been developed based on simulation software and a modeled building. Therefore, a typical office building is considered for testing five efficiency measures in three climatic conditions in Algeria. This approach is conducted in two phases: first, the analysis of each measure{\textquoteright}s effect is independently carried out in terms of cooling energy and heating energy intensities. Then, a combination of optimal measures for each climate zone is measured in terms of three sustainable indicators: final energy consumption, energy cost saving and CO2\&nbsp;emission. Findings The results reveal that a combination of optimal measures has a substantial impact on building energy saving and CO2\&nbsp;emission. This saving can rise to 41 and 31 percent in a hot and cold climate, respectively. Furthermore, it is concluded that obtaining higher building performance, different design alternatives should be adapted to the climate proprieties and the local construction materials must be applied. Originality/value This study is considered as an opportunity for achieving the national strategy, as it may contribute in improving office building performance and demonstrating a suitable tool to assist stakeholders in the decision making of most important parameters in the design stage for new or retrofit buildings.},
	url = {https://www.emerald.com/insight/content/doi/10.1108/SASBE-04-2019-0057/full/html},
	author = {Rahmouni, Sofiane and Smail, Rachid}
}
@article {7813,
	title = {Improving barrier and operational risk analysis (BORA) using criticality importance analysis case study: oil and gas separator},
	journal = {World Journal of Engineering},
	volume = {17},
	number = {2},
	year = {2020},
	pages = {267-282},
	abstract = {Purpose The purpose of this paper is to show the impact of operational and environmental conditions (risk influencing factors) on the component criticality of safety barriers, safety barrier performance and accidents frequency and therefore on risk levels. Design/methodology/approach The methodology focuses on the integration of criticality importance analysis in barrier and operational risk analysis method, abbreviated as BORA-CIA. First, the impact of risk influencing factors (RIFs) associated with basic events on safety barrier performance and accident frequency is studied, and then, a risk evaluation is performed. Finally, how unacceptable risks can be mitigated regarding risk criteria is analyzed. Findings In the proposed approach (BORA-CIA), the authors show how specific installation conditions influence risk levels and analyze the prioritization of components to improve safety barrier performance in oil and gas process. Practical implications The proposed methodology seems to be a powerful tool in risk decision. Ordering components of safety barriers taking into account RIFs allow maintenance strategies to be undertaken according to the real environment far from average data. Also, maintenance costs would be estimated adequately. Originality/value In this paper, an improved BORA method is developed by incorporating CIA. More precisely, the variability of criticality importance factors of components is used to analyze the prioritization of maintenance actions in an operational environment.},
	url = {https://www.emerald.com/insight/content/doi/10.1108/WJE-04-2019-0129/full/html},
	author = {Bourareche, Mouloud and Said, Rachid Nait and Zidani, Fatiha and Ouazraoui, Nouara}
}
@article {7803,
	title = {An Investigation into Unsafe Behaviors and Traffic Accidents Involving Unlicensed Drivers: A Perspective for Alignment Measurement},
	journal = {Int J Environ Res Public Health},
	volume = {17},
	number = {18},
	year = {2020},
	abstract = {Road traffic plays a vital role in countries{\textquoteright} economic growth and future development. However, traffic accidents are considered a major public health issue affecting humankind. Despite efforts by governments to improve traffic safety, the misalignment between the policy efforts and on-ground infringements, distractions and breaches reflect the regulatory failure. This paper uses the Bayesian network method to investigate unsafe behaviors and traffic accidents involving unlicensed drivers as a perspective for the regulatory alignment assessment. The findings suggest that: (1) unlicensed drivers are more likely to have unsafe driving behaviors; (2) the probability of being involved in a severe traffic accident increases when the drivers are unlicensed and decreases in the case of licensed drivers; (3) young drivers are noticeably more likely to engage in unsafe behaviors, usually leading to serious injuries and deaths, when their driving licenses are invalid; (4) women are more likely to engage in right-of-way violations and to have collisions with no serious injuries, contrary to unlicensed men drivers, who are involved in other types of traffic accidents resulting in serious injuries.},
	url = {https://pubmed.ncbi.nlm.nih.gov/32947935/},
	author = {Wafa Boulagouas and Garc{\'{\i}a-Herrero, Susana and Rachid Chaib and Juan Diego Febres and Miguel {\'A}ngel Mariscal and M{\'e}barek Djebabra}
}
@article {7812,
	title = {Multi-criterion analysis based on integrated process-risk optimization},
	journal = {Journal of Engineering, Design and Technology},
	volume = {18},
	number = {5},
	year = {2020},
	pages = {1015-1035},
	abstract = {Purpose This paper aims to propose a process optimization approach showing how organizations are able to achieve sustainable and efficient process optimization, based on integrated process-risk analysis using several criteria to a better decision-making. Design/methodology/approach Several approaches are used (functional/dysfunctional) to analyze how processes work and how to deal with risks forming multi-criteria decision-making. In addition, a risk factor is integrated into the structured analysis and design techniques (SADT) method forming a novel graphical view SADT-RISK; it identifies process{\textquoteright}s failures using the traditional failure modes, effects and criticality analysis (FMECA) and economic consideration {\textquotedblleft}failure mode and effect, criticality analysis-cost FMECA-C{\textquotedblright} making a multi-criterion matrix for better decision-making. Subsequently, some recommendations are proposed to overcome the failure. Findings This paper illustrates a methodology with a case study in a company, which has a leading brand in the market in Algeria. The authors are integrating a varied portfolio of approaches linking with each other to analyze, improve and optimize the processes in terms of reliability and safety to deal with risks; reduce the complexity of the systems; increase the performance; and achieve a safer process. However, the proposed method can be readily used in practice. Originality/value The paper provides a new approach based on integrated management using new elements as an innovative contribution, forming a novel graphical view SADT-RISK; it identifies process{\textquoteright}s failures using the traditional FMECA and economic consideration {\textquotedblleft}a new multi-criterion matrix for better decision-making and using the SWOT analysis {\textendash} Strengths, Weaknesses, Opportunities, Threats {\textendash} as a balance to decide about the process improvement{\textquotedblright}. The authors conclude that this methodology is oriented and applicable to different types of companies such as financial, health and industrial as illustrated by this case study.},
	url = {https://www.emerald.com/insight/content/doi/10.1108/JEDT-08-2019-0201/full/html},
	author = {Derradji, Rima and HAMZI, Rachida}
}
@article {7807,
	title = {Preliminary hazard identification for risk assessment on a complex system for hydrogen production},
	journal = {International Journal of Hydrogen Energy},
	volume = {45},
	number = {20},
	year = {2020},
	pages = {11855-11865},
	abstract = {Renewable\&nbsp;power generation\&nbsp;facilities are constantly expanding due to the expected depletion of\&nbsp;fossil fuels\&nbsp;and the increasingly demanding policy of pollution control. Having said that, hydrogen is one of the promising energy sources. That said, hydrogen chain safety is an unescapable parameter that should continuously coexist with the development of hydrogen domain. In this context, this article presents a contribution to the risk analysis and evaluation of a complex\&nbsp;hydrogen production\&nbsp;system {\textquoteright}EGA-9000{\textquoteright} at CIEMAT (Centre for Research on Energy, Environment and Technology - Madrid, Spain). The methodology followed in this study revolves around the\&nbsp;risk analysis process\&nbsp;through a FAST (Functional Analysis System Technique) functional analysis method and a HAZOP (HAZard and Operability) dysfunctional analysis method. The evaluation of the thirty-three scenarios identified by the risk analysis shows that the studied system is insecure. Indeed, five scenarios at an unacceptable level of risk. And it is noted that the risk of fire and explosion is the major risk for all scenarios studied. To this end,\&nbsp;safety measures\&nbsp;(recommendation) have been proposed based on the weaknesses detected by the risk analysis carried out.},
	url = {https://www.sciencedirect.com/science/article/abs/pii/S0360319919340091?via\%3Dihub},
	author = {Hefaidh Hadef and Belkhir Negrou and Gonz{\'a}lez Ayuso, Tom{\'a}s and M{\'e}barek Djebabra and Ramadan, Mohamad}
}
@article {7805,
	title = {Proposal of a hybrid decision-making model for the alignment of the environmental performance},
	journal = {Management of Environmental Quality},
	volume = {31},
	number = {6},
	year = {2020},
	pages = {1603-1622},
	abstract = {Purpose Decoupling of pressures ranging from regulatory compliance and stakeholders expectations to business competitiveness and sustainability, companies need to align their environmental strategies with a broader consideration of these influences. This paper aims at developing a dynamic alignment model to enhance the environmental performance that considers the influential pressures based on a multi-criteria decision-making process. Design/methodology/approach Authors have proposed a dynamic model for the alignment of the environmental performance based on a hybrid multi-criteria decision-making approach combining the analytic hierarchy process (AHP) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). This model considers contemporary strategic dynamism of the environmental performance and provides a methodology to assist companies prioritizing the environmental aspects based on the influential pressures and deciding on the enhancement pathways. Findings The proposed model based on a hybrid multi-criteria decision-making process allows prioritizing the environmental aspects considering the allocated weights to the alignment-triggered pressures and draw the way to develop different pathways to improve the alignment. Practical implications The proposed dynamic alignment model presents an instrument for the continuous alignment of the environmental performance and an effective management of changes and contributes to minimize gaps and divergences. Originality/value In this paper, the environmental performance has been approached through the contemporary strategic dynamism with the deployment of the multi-criteria decision-making techniques to yield an alignment framework for the environmental decision that combines the internal and external approaches for an effective and sustainable improvement of the environmental performance.},
	url = {https://www.emerald.com/insight/content/doi/10.1108/MEQ-01-2020-0021/full/html},
	author = {Wafa Boulagouas and Rachid Chaib and M{\'e}barek Djebabra}
}
@article {7806,
	title = {Using Fuzzy-Improved Principal Component Analysis (PCA-IF) for Ranking of Major Accident Scenarios},
	journal = {Systems Engineering},
	volume = {45},
	year = {2020},
	pages = {2235{\textendash}2245},
	abstract = {The industrial risk mapping is a topical problem in the field of risk management that attracts many researchers to develop risk matrices to ensure consultation between their actors. In this context, this paper aims to propose the principal component analysis (PCA) method as support for this consultation. Indeed, the use of PCA method is justified by its robustness for aggregate initial data associated with industrial risks as principal factors and ranking of this risk in terms of their criticalities in risk matrices. However, the aggregation of initial data on industrial risks by the main factors, in some cases, leads to inaccuracies which make it difficult to classify certain risks. This paper proposes two variants of PCA method to solve this inaccuracy and succeeds in classifying risks according to their respective criticalities, namely PCA-Improved (PCA-I) and PCA-I-Fuzzy (PCA-IF). The results come from the PCA application and its proposed variants (PCA-I and PCA-IF) on an example of accident scenarios ranking. We have established a scientific basis for the capitalization of mapping tool for consultation and decision support to industrial risk managers.},
	url = {https://link.springer.com/article/10.1007/s13369-019-04233-7},
	author = {Hefaidh Hadef and M{\'e}barek Djebabra}
}
@article {83364,
	title = {DYNAMIC MODELLING OFTHE BEHAVIOUR OF THE OUARKISS EARTHEN DAM UNDER SEISMIC LOADS},
	journal = {GeoScience Engineering},
	volume = {66},
	number = {1},
	year = {2020},
	pages = {40{\textendash}52},
	abstract = {
	The dynamic modelling of the behaviour of the Ouarkissearthen dam under seismic loads was performed using the finite elements method (FEM), with an approach in effective stresses. The soil behaviour is described by the Mohr-Coulomb criterion. A numerical method and a procedure of analysis are presented in this work. The seismic response of an earthen dam was evaluated. Particular emphasis is placed on the calculation of stresses, displacements, deformations and interstitial overpressures recorded during the seismic solicitation. It has been shown that numerical simulation is able to highlight the fundamental aspects of the displacements and deformations processes experienced by the structure ofdam and to produce preliminary results for the evaluation of the seismic behaviour of the structure taking into account the physical non-linearity of the materials constituting the body of the dam and the effect of the rigidity of the different zones of the dam and the foundation.

},
	url = {http://geoscience.cz/ojs/index.php/GSE/article/view/296/295},
	author = {Seghir, Tarek and FOURA, Ali and Zeroual, Abdelatif and Massouh, Fawaz}
}
@inbook {7515,
	title = {Ahmed Ghouati, L\&$\#$39;enseignement sup{\'e}rieur en Alg{\'e}rie : entre contraintes politiques et d{\'e}fis socio-{\'e}conomiques},
	booktitle = {LES COMPTES RENDUS},
	year = {2020},
	publisher = {OpenEdition Journals},
	organization = {OpenEdition Journals},
	url = {https://journals.openedition.org/lectures/45347},
	author = {Belkacem, Hamaizi}
}
@article {7551,
	title = {Alt{\'e}rit{\'e} divine et {\'e}tiolement de l\&$\#$39;{\'e}go : Le th{\'e}ocentrisme dans la litt{\'e}rature soufie},
	journal = {Norsud},
	volume = {16},
	year = {2020},
	abstract = {Le pr{\'e}sent article propose de red{\'e}finir les balises frontali{\`e}res s{\'e}parant la binarit{\'e} tant radot{\'e}e dans l{\textquoteright}enceinte heuristique des sciences humaines et sociales {\`a} savoir : (alt{\'e}rit{\'e}/{\'e}gocentrisme), et ce {\`a} la lumi{\`e}re de la philosophie {\'e}sot{\'e}rique musulmane qui tend {\`a} consid{\'e}rer ces deux acceptions, non dans un tiraillement antith{\'e}tique, mais plut{\^o}t dans une symbiose fusionnelle interd{\'e}pendante. Afin de mettre sur les rails notre entreprise, une lecture descriptiveanalytique des jets des ma{\^{\i}tres soufis, ayant scell{\'e} de leur empreinte la philosophie mystique religieuse, parait plus qu{\textquoteright}imp{\'e}rative afin d{\textquoteright}{\'e}lucider et {\'e}tayer notre dessein.},
	url = {https://misuratau.edu.ly/journal/norsud/upload/file/R-1282-10.pdf},
	author = {Lebbal, Sara}
}
@proceedings {7406,
	title = {Besoins langagiers et strat{\'e}gies de compr{\'e}hension},
	journal = {S{\'e}minaire national : Lecture compr{\'e}hension : approches, transdisciplinarit{\'e} et pratiques, le 25 F{\'e}vrier},
	year = {2020},
	address = {M{\textquoteright}sila, Alg{\'e}rie},
	author = {KHADRAOUI, E}
}
@article {7543,
	title = {Compte-rendu De L\&$\#$39;ouvrage:\&quot;la M{\'e}moire Du Temps Chez Proust Et Beckett\&quot; Detrovato Vincent},
	journal = {Revue alg{\'e}rienne des lettres},
	volume = {4},
	number = {2},
	year = {2020},
	pages = {70-74},
	abstract = {il s{\textquoteright}agit d{\textquoteright}un compte rendu de l{\textquoteright}ouvrage de TROVATO intitul{\'e} {\guillemotleft} La m{\'e}moire du temps chez Proust et Beckett {\guillemotright}. L{\textquoteright}auteur nous propose une {\'e}tude transversale sur la mouvance de la notion {\guillemotleft} temps {\guillemotright} dans deux chefs-d{\textquoteright}{\o}e}uvre qui ont marqu{\'e} l{\textquoteright}histoire de la litt{\'e}rature et les arts : {\guillemotleft} A la recherche du temps perdu {\guillemotright} de Marcel Proust et {\guillemotleft} En attendant Godot {\guillemotright} de Samuel Beckett. Qu{\textquoteright}il s{\textquoteright}agisse, en effet, de l{\textquoteright}analyse de la valeur du temps ou le temps comme notion philosophique dans l{\textquoteright}{\'e}criture, cet ouvrage permet une r{\'e}flexion lucide sur l{\textquoteright}impact du temps sur tout ce qui forme la scripto-gen{\`e}se, la di{\`e}g{\`e}se, la m{\'e}moire, la perception du monde et l{\textquoteright}horizon d{\textquoteright}attente.},
	url = {https://www.asjp.cerist.dz/en/article/118740},
	author = {Mouffouk, Samia}
}
@article {7512,
	title = {Conception de dispositif de formation : de l\&rsquo;analyse des besoins {\`a} l\&rsquo;{\'e}valuation},
	journal = {Revue Hawafiz, Num{\'e}ro sp{\'e}cial},
	year = {2020},
	pages = {499-504},
	author = {Arrar, Salah~}
}
@proceedings {7371,
	title = {Didactique de l\&rsquo;interculturel : Quelles exigences, quels objectifs},
	journal = {Colloque international en ligne : L{\textquoteright}interculturel dans la formation des enseignants des langues {\'e}trang{\`e}res : r{\'e}ussir professorat, l{\textquoteright}extr{\^e}me exigence d{\textquoteright}un monde pluriel, Universit{\'e} Batna 2, le 15 D{\'e}cembre},
	year = {2020},
	author = {KHADRAOUI, S and KHADRAOUI, F-Z}
}
@proceedings {7480,
	title = {El{\'e}ments de d{\'e}finition de la comp{\'e}tence interculturelle},
	journal = {Universit{\'e} de Batna 2 15/02/2020},
	year = {2020},
	address = {Batna, Alg{\'e}rie},
	author = {SLITANE, S}
}
@proceedings {7405,
	title = {{\'E}l{\'e}ments pour repenser l\&rsquo;interculturel dans la formation des enseignants d{\'e} FLE dans le mond{\'e} post-Covid-19},
	journal = {Colloqu{\'e} international en ligne, Universit{\'e} Batna 2},
	year = {2020},
	address = {Batna, Alg{\'e}rie},
	author = {HAMAIZI, B}
}
@proceedings {7479,
	title = {Enseignement du fle {\`a} distance : un sc{\'e}nario p{\'e}dagogique, difficult{\'e}s et perspectives},
	journal = {Journ{\'e}e d{\textquoteright}{\'e}tude organis{\'e}e par l{\textquoteright}Universit{\'e} d{\textquoteright}Oum El-Bouaghi},
	year = {2020},
	address = {Oum El-Bouaghi, Alg{\'e}rie},
	author = {ALOUANE, A}
}
@proceedings {7372,
	title = {Entre objectivit{\'e} et objectivation de la recherche scientifique},
	journal = {Journ{\'e}e d{\textquoteright}{\'e}tude~:~M{\'e}thodologie d{\textquoteright}{\'e}laboration d{\textquoteright}un m{\'e}moire de Master, Universit{\'e} de M{\textquoteright}sila, le 03 F{\'e}vrier},
	year = {2020},
	address = {M{\textquoteright}sila, Alg{\'e}rie},
	author = {KHADRAOUI, S and KHADRAOUI, F-Z}
}
@article {7513,
	title = {Formation des futurs enseignants de FLE {\`a} l\&rsquo;enseignement des contes litt{\'e}raires. Dans Lobiyed Soltani S. et Cr{\'e}mon{\`e}se Faller C. (dir.)},
	journal = {La formation entre probl{\'e}matiques et perspectives. Tlemcen : La Nouvelle Publication Universitaire},
	year = {2020},
	author = {Arrar, Salah~}
}
@article {7553,
	title = {Former {\`a} La M{\'e}thodologie De La Recherche {\`a} L\&rsquo;universit{\'e} : Quels D{\'e}fis Pour Le Chercheur ?},
	journal = {Revue alg{\'e}rienne des lettres},
	volume = {4},
	number = {3},
	year = {2020},
	pages = {94-101},
	abstract = {En sciences humaines et sociales, le cours de m{\'e}thodologie de la recherche s{\textquoteright}impose comme une mati{\`e}re indispensable dans le cursus universitaire. Sa maitrise garantit une cr{\'e}dibilit{\'e} des projets r{\'e}alis{\'e}s et une ascension des travaux universitaires dans la sph{\`e}re des recherches scientifiques. Toutefois, dans le domaine en question, la comp{\'e}tence m{\'e}thodologique implique une prise compte de connaissances tous azimuts, n{\'e}cessaires {\`a} l{\textquoteright}{\'e}laboration du travail scientifique selon les r{\`e}gles requises par la communaut{\'e} scientifique afin d{\textquoteright}aboutir {\`a} la r{\'e}ussite universitaire. Une formation {\`a} la m{\'e}thodologie de la recherche doit partir d{\textquoteright}un diagnostic de la situation-probl{\`e}me dans laquelle se trouvent les {\'e}tudiants pour pouvoir les surmonter. Cette contribution se veut une r{\'e}flexion sur les d{\'e}fis {\`a} relever par le chercheur afin de r{\'e}ussir sa formation m{\'e}thodologique et son projet de recherche.},
	url = {https://www.asjp.cerist.dz/en/article/140963},
	author = {Meziani, Amina}
}
@proceedings {7401,
	title = {Former {\`a} l\&rsquo;enseignement de la litt{\'e}rature en contexte universitaire alg{\'e}rien : quel(s) dispositif(s) pour quel(s) objectif(s) ? Formation de formateurs entre {\'e}tats des lieux, innovation et perspectives.},
	journal = {Colloque international organis{\'e} par l{\textquoteright}ENS d{\textquoteright}Oran (Alg{\'e}rie) et l{\textquoteright}institut national sup{\'e}rieur du professorat et de l{\textquoteright}{\'e}ducation de Nice (France) tenu le 15 et 16 D{\'e}cembre},
	year = {2020},
	author = {ARRAR, S}
}
@proceedings {7369,
	title = {Interculturel, co-culturel ou transculturel : quel(s) concept(s) pour la formation des enseignants en contexte alg{\'e}rien ?},
	journal = {Communication au colloque international en ligne {\guillemotleft}~L{\textquoteright}interculturel dans la formation des enseignants des langues {\'e}trang{\`e}res : le r{\'e}ussir professoral, l{\textquoteright}extr{\^e}me exigence d{\textquoteright}un monde pluriel~{\guillemotright}, D{\'e}partement de fran\c cais \& Laboratoire Selnom, },
	year = {2020},
	author = {BELKACEM, M-A}
}
@article {7547,
	title = {Isabelle Eberhardt : Temoin D\&rsquo;une {\'e}poque},
	journal = {Revue alg{\'e}rienne des lettres},
	volume = {4},
	number = {1},
	year = {2020},
	pages = {86-96},
	abstract = {Dans le pr{\'e}sent article nous nous int{\'e}resserons au regard que porte Isabelle Eberhardt sur l{\textquoteright}histoire commune qui regroupe les deux rives de la M{\'e}diterran{\'e}e, l{\textquoteright}Alg{\'e}rie et la France, {\`a} une {\'e}poque marqu{\'e}e par la colonisation et ce, en recourant {\`a} l{\textquoteright}approche imagologique pour tenter de r{\'e}v{\'e}ler l{\textquoteright}espace culturel, social et id{\'e}ologique que les diff{\'e}rentes images traduisent dans ses textes, {\`a} travers les trois niveaux d{\textquoteright}analyse {\'e}tablies par Daniel-Henri Pageaux. Les r{\'e}cits choisis se partagent entre histoire et m{\'e}moire o{\`u} la reconstitution, plus ou moins, fid{\`e}le de la r{\'e}alit{\'e} que l{\textquoteright}auteure observait prenait, volontiers, les reflets de sa perception, ses convictions, son id{\'e}ologie, son regard vis-{\`a}-vis de l{\textquoteright} {\guillemotleft} Autre {\guillemotright} qu{\textquoteright}elle d{\'e}fendait ou alors qu{\textquoteright}elle d{\'e}non\c cait. Se rapportant {\`a} une rencontre, une histoire entendue, un {\'e}v{\`e}nement v{\'e}cu par l{\textquoteright}auteure lors de ses d{\'e}placements, le tout permet de dessiner le portrait plus ou moins complexe d{\textquoteright}une soci{\'e}t{\'e} et d{\textquoteright}une {\'e}poque travers{\'e}es par elle.},
	url = {https://www.asjp.cerist.dz/en/article/114420},
	author = {Benziane, Sabrina}
}
@proceedings {7449,
	title = {L\&$\#$39;impact de la dimension culturelle sur l\&$\#$39;acquisition de la langue fran\c caise {\`a} l\&$\#$39;{\`e}re de la nouvelle r{\'e}forme {\'e}ducative alg{\'e}rienne : d{\'e}fis et enjeux},
	journal = {UN CERTAIN REGARD. LA LANGUE FRAN{\c C}AISE POUR PENSER, APPR{\'E}HENDER ET EXPRIMER LE MONDE Actes du XXVIIIe Colloque AFUE XXVIII Colloque AFUE. {\textcopyright} de la edici{\'o}n, UAM {\'E}ditiones,},
	year = {2020},
	author = {MEZIANI, A}
}
@article {7495,
	title = {L\&$\#$39;influence Du Syst{\`e}me G{\'e}n{\'e}rique Du Tamazight Sur L\&$\#$39;acquisition Du Genre En Fran\c cais : Cas Des Apprenants Chaouiphones De S{\'e}tif},
	journal = {Iles d Imesli},
	volume = {12},
	number = {1},
	year = {2020},
	pages = {107-125},
	abstract = {La pr{\'e}sente contribution se donne pour objectif de v{\'e}rifier le degr{\'e} d{\textquoteright}assimilation du syst{\`e}me g{\'e}n{\'e}rique fran\c cais chez les locuteurs non-natifs dont la langue maternelle est le Tamazight, en l{\textquoteright}occurrence le chaoui parl{\'e} dans le sud de la wilaya de S{\'e}tif. Le paysage sociolinguistique de cette r{\'e}gion se caract{\'e}rise par la coexistence de plusieurs langues, {\`a} savoir l{\textquoteright}arabe, le chaoui et le fran\c cais. En effet, le contact de langues existant entre la langue maternelle des chaouiphones et le fran\c cais en tant que langue {\'e}trang{\`e}re (FLE) engendre des interf{\'e}rences affectant l{\textquoteright}acquisition du fran\c cais, et ce, sur diff{\'e}rents plans : s{\'e}mantique, phon{\'e}tique, lexical, grammatical,etc. Nous tenons {\`a} pr{\'e}ciser que pour le pr{\'e}sent article, nous nous limitons {\`a} l{\textquoteright}{\'e}tude de l{\textquoteright}aspect grammatical du FLE, {\'e}tant donn{\'e} que notre recherche porte sur l{\textquoteright}interf{\'e}rence du dialecte chaoui dans la d{\'e}finition du genre grammatical des noms appartenant {\`a} la langue fran\c caise. Abstract: The current contribution aims to check the degree of assimilation of the gender system of the French language by non-native speakers whose mother tongue is Berber, namely the Chaoui dialect spoken in the south of the province of Setif. The sociolinguistic landscape of this region is characterized by the coexistence of several languages, namely Arabic, Chaoui and French. In fact, the language contact that exists between the mother tongue of the Chaoui speakers and the French language as a foreign language (FLE = French as a Foreign Language) engenders interferences affecting the acquisition of French, and this on different levels: semantic, phonetic, lexical, grammatical,etc. We would like to point out that for the present article, we limit ourselves to the study of the grammatical aspect of French as a Foreign Language as our research focuses on the interference of the Chaoui dialect in the definition of the grammatical gender of the nouns belonging to the French language},
	url = {https://www.asjp.cerist.dz/en/article/143257},
	author = {Belghouar, Sarra and Belkacem, Mohammed-Amine}
}
@article {7546,
	title = {La Femme Aurassienne A Travers Les Plumes De Mathea Gaudry, Germaine Tillion Et Anna Greki},
	journal = {Revue alg{\'e}rienne des lettres},
	volume = {4},
	number = {1},
	year = {2020},
	pages = {182-194},
	abstract = {La pr{\'e}sente recherche s{\textquoteright}inscrit dans un champ interdisciplinaire afin de lever le voile sur la r{\'e}gion des Aur{\`e}s pendant l{\textquoteright}{\'e}poque coloniale et plus pr{\'e}cis{\'e}ment au d{\'e}but du XXe si{\`e}cle. Les Aur{\`e}s ; une r{\'e}gion connue pour sa diversit{\'e} ethnographique, culturelle et aussi linguistique. La femme est au centre de la r{\'e}flexion o{\`u} nous avons fait appel {\`a} des auteures fran\c caises ayant v{\'e}cu dans la r{\'e}gion pour mesurer le regard de l{\textquoteright}Autre sur la femme aurassienne.},
	url = {https://www.asjp.cerist.dz/en/article/114429},
	author = {Tarek Benzeroual}
}
@proceedings {7402,
	title = {La litt{\'e}rature en classe de FLE : entre pratiques lectorales et repr{\'e}sentations culturelles. Litt{\'e}rature(s) et repr{\'e}sentations(s)},
	journal = {Colloque international organis{\'e} {\`a} l{\textquoteright}universit{\'e} de Guelma (Alg{\'e}rie) les 20 et 21 Janvier},
	year = {2020},
	address = {Guelma, Alg{\'e}rie},
	author = {ARRAR, S}
}
@article {7550,
	title = {La Reconsid{\'e}ration De La Culture De L\&rsquo;autre {\`a} L\&$\#$39;{\`e}re De La Nouvelle R{\'e}forme {\'e}ducative En Alg{\'e}rie: Leurre Ou R{\'e}alit{\'e}?},
	journal = {{\guillemotright} Revue des sciences humaines de l{\textquoteright}universit{\'e} Oum El Bouaghi},
	volume = {7},
	number = {3},
	year = {2020},
	pages = {1735-1744},
	abstract = {Le syst{\`e}me {\'e}ducatif alg{\'e}rien, comme celui des autres pays, s{\textquoteright}est mobilis{\'e} pour refonder une {\'e}cole adapt{\'e}e aux exigences et aux enjeux de la mondialisation et de la globalisation. L{\textquoteright}objectif majeur {\'e}tant l{\textquoteright}ouverture vers le monde et la promotion d{\textquoteright}une approche interculturelle tout en contribuant {\'e}troitement au d{\'e}veloppement identitaire et personnel de l{\textquoteright}apprenant. Ces observations font mieux comprendre la n{\'e}cessit{\'e} d{\textquoteright}une r{\'e}flexion sur la place accord{\'e}e {\`a} la dimension (inter)culturelle dans les discours officiels ainsi que dans les programmes d{\textquoteright}enseignement du FLE, {\`a} l{\textquoteright}{\`e}re de la nouvelle r{\'e}forme du syst{\`e}me {\'e}ducatif alg{\'e}rien. Le but est de mesurer le degr{\'e} de conformit{\'e} des finalit{\'e}s que pr{\^o}nent les textes institutionnels par rapport au contenu des nouveaux manuels scolaires et de v{\'e}rifier, in fine, l{\textquoteright}impact de cette dimension sur la construction identitaire, sociale et psychologique de l{\textquoteright}apprenant.},
	url = {https://www.asjp.cerist.dz/en/article/145970},
	author = {Khiari, Iness-Rayane and Meziani, Amina}
}
@article {7554,
	title = {La transgression scripturale au service de la r{\'e}conciliation spectrale dans le roman maghr{\'e}bin d\&$\#$39;expression fran\c caise},
	journal = {Afak Sciences},
	volume = {5},
	number = {3},
	year = {2020},
	pages = {429-440},
	abstract = {L{\textquoteright}Histoire du Maghreb a incontestablement influenc{\'e} l{\textquoteright}imaginaire de ses {\'e}crivains. {\`A} travers une vision transversale sur le roman maghr{\'e}bin de langue fran\c caise, cette contribution tente de comprendre la prise en charge de l{\textquoteright}acte de r{\'e}conciliation par la transgression scripturale , ainsi tous les liens entre auteur/lecteur; {\o}e}uvre/r{\'e}ception qui mettent en exergue l{\textquoteright}importance des strat{\'e}gies scripturales et id{\'e}ologiques utilis{\'e}es par les auteurs comme vecteur pour faire passer leur message et qui soulignent leur volont{\'e} de sortir d{\textquoteright}une logique de revendication et de d{\'e}placer le d{\'e}bat sur la voie du dialogue et de la r{\'e}conciliation . Mots cl{\'e}s: transgressions scripturales, r{\'e}conciliation spectrale, horizon d{\textquoteright}attente , auteur/lecteur , alt{\'e}rit{\'e}.},
	url = {https://www.asjp.cerist.dz/en/downArticle/351/5/3/116296},
	author = {Mouffouk, Samia}
}
@article {7516,
	title = {La Validit{\'e} De L\&rsquo;{\'e}valuation Sommative Du Fle En Alg{\'e}rie : Les Questionnaires De La Compr{\'e}hension De L\&rsquo;{\'e}crit Au Cycle Moyen},
	journal = {in psychological \& educational studies},
	volume = {13},
	number = {4},
	year = {2020},
	pages = {374-387},
	abstract = {Le pr{\'e}sent article qui porte sur l{\textquoteright}{\'e}valuation sommative du FLE vise {\`a} {\'e}tudier la validit{\'e} du contenu des questionnaires destin{\'e}s {\`a} {\'e}valuer la compr{\'e}hension de l{\textquoteright}{\'e}crit au cycle moyen. Les r{\'e}sultats obtenus, suite {\`a} l{\textquoteright}analyse des questionnaires recueillis ont r{\'e}v{\'e}l{\'e} que les items {\'e}labor{\'e}s par les enseignants-concepteurs ne contribuent pas {\`a} apporter des preuves sur la comp{\'e}tence des apprenants au niveau de la construction du sens des textes lus. Ces questionnaires ne sont pas donc suffisamment valides pour {\'e}valuer ladite comp{\'e}tence. Abstract: This article, which focuses on the summative evaluation of French Foreign Language, examines the validity of content of questionnaires designed to assess the comprehension of texts in the middle cycle. The results obtained from the analysis of the questionnaires collected revealed that the items developed by the teachers-designers do not contribute to proving the competence of the learners to construct the meaning of the texts read. These questionnaires are therefore not sufficiently valid to evaluate this competence.},
	url = {https://www.asjp.cerist.dz/en/article/134125},
	author = {Laidoudi, Assia and Khadraoui, Errime}
}
@article {7517,
	title = {Le Jeu Th{\'e}{\^a}tral En Classe De Fle : Vers Une M{\'e}thode Th{\'e}{\^a}trale Adapt{\'e}e Au Niveau Des Apprenants},
	journal = {Didactiques},
	volume = {9},
	number = {3},
	year = {2020},
	pages = {102-137},
	abstract = {Notre contribution qui porte sur le jeu th{\'e}{\^a}tral ({\`a} partir des contes) tente de pr{\'e}ciser la d{\'e}marche {\`a} suivre pour pratiquer le th{\'e}{\^a}tre en classe de FLE. La litt{\'e}rature scientifique consult{\'e}e expose des m{\'e}thodes (ensembles d{\textquoteright}{\'e}tapes) vari{\'e}es, en d{\'e}pit de certaines similitudes, adapt{\'e}es {\`a} la vari{\'e}t{\'e} des publics. Ceci justifie notre exp{\'e}rimentation men{\'e}e aupr{\`e}s des apprenants alg{\'e}riens dans le but de d{\'e}terminer quelles {\'e}tapes conviennent le plus {\`a} ces apprenants. Bien que les exp{\'e}rimentations ici d{\'e}crites se r{\'e}duisent {\`a} celles men{\'e}es aupr{\`e}s des coll{\'e}giens (apprenants du cycle moyen), les propositions fournies suite {\`a} notre analyse concernent les publics d{\'e}butants, interm{\'e}diaires et de niveau avanc{\'e} ; car elles tiennent compte de nos exp{\'e}riences avec des apprenants du primaire et des {\'e}tudiants universitaires. Abstract Our contribution, which focuses on theatrical play (based on stories), attempts to specify the procedure to follow to practice the theater in class of French as Foreign Language. The scientific literature consulted offers a variety of methods (steps), despite certain similarities, adapted to the variety of publics. This justifies our experimentation realized with Algerian learners in order to determine which stages are most suitable for these learners. Although the experiments described are limited to those realized with students of college (middle school learners), the proposals provided following our analysis concern beginners, intermediates and advanced publics;\&nbsp;},
	url = {https://www.asjp.cerist.dz/en/article/141579},
	author = {Laidoudi, Assia}
}
@proceedings {7404,
	title = {Le mouvement associatif en Alg{\'e}rie : pour un {\o}e}cum{\'e}nisme soci{\'e}tal},
	journal = {Colloque national},
	year = {2020},
	address = {Setif, Alg{\'e}rie},
	author = {HAMAIZI, B}
}
@proceedings {7407,
	title = {Les sp{\'e}cificit{\'e}s de la recherche scientifique en sciences du langage},
	journal = {Journ{\'e}e d{\textquoteright}{\'e}tude : M{\'e}thodologie d{\textquoteright}{\'e}laboration d{\textquoteright}un m{\'e}moire, le 03 F{\'e}vrier},
	year = {2020},
	address = {M{\textquoteright}sila, Alg{\'e}rie},
	author = {KHADRAOUI, E}
}
@proceedings {7409,
	title = {L\&rsquo;{\'e}valuation des comp{\'e}tences en FLE dans le syst{\`e}me {\'e}ducatif alg{\'e}rien : r{\'e}alit{\'e}s et perspectives},
	journal = {Colloque international en ligne : L{\textquoteright}interculturel dans la formation des enseignants des langues {\'e}trang{\`e}res : le r{\'e}ussir professoral, l{\textquoteright}extr{\^e}me exigence d{\textquoteright}un monde pluriel, Batna le 15 D{\'e}cembre},
	year = {2020},
	address = {Batna, Alg{\'e}rie},
	author = {LAIDOUDI, A}
}
@article {7555,
	title = {L\&rsquo;impact du jeu et de l\&rsquo;approche actionnelle sur l\&rsquo;enseignement pr{\'e}scolaire en Alg{\'e}rie},
	journal = {Educ recherche},
	volume = {10},
	number = {1},
	year = {2020},
	pages = {1-14},
	abstract = {L{\textquoteright}objectif de cette recherche est de voir l{\textquoteright}impact de l{\textquoteright}op{\'e}rationnalisation de la perspective actionnelle sur l{\textquoteright}apprentissage lors d{\textquoteright}une s{\'e}ance d{\textquoteright}{\'e}ducation scientifique et technologique en classe de pr{\'e}scolaire en Alg{\'e}rie. Nous avons men{\'e} une exp{\'e}rimentation dans cette classe pour pouvoir mesurer l{\textquoteright}{\'e}cart de l{\textquoteright}interaction et de la motivation chez les {\'e}l{\`e}ves dans deux situations d{\textquoteright}apprentissage diff{\'e}rentes, impliquant un sc{\'e}nario ludique et des t{\^a}ches {\`a} ex{\'e}cuter. L{\textquoteright}analyse et la discussion des r{\'e}sultats obtenus nous ont permis de v{\'e}rifier notre hypoth{\`e}se de d{\'e}part et de dire que le jeu a rendu l{\textquoteright}apprentissage plus attractif et efficace tout en rendant l{\textquoteright}{\'e}l{\`e}ve acteur social plus interactif.},
	url = {https://www.asjp.cerist.dz/en/article/114891},
	author = {Mouffouk, Samia and Abdelhamid, Salah-Eddine and Khadraoui, Fatima-Zohra}
}
@proceedings {7408,
	title = {Maitrise de la comp{\'e}tence culturelle chez les futurs enseignants de FLE : r{\'e}alit{\'e} des profils de sortie},
	journal = {Colloque international en ligne~: L{\textquoteright}interculturel dans la formation des enseignants des langues {\'e}trang{\`e}res : le r{\'e}ussir professoral, l{\textquoteright}extr{\^e}me exigence d{\textquoteright}un monde pluriel, Laboratoire SELNoM, D{\'e}partement de fran\c cais, Universit{\'e} de Batna 2 },
	year = {2020},
	address = {Batna, Alg{\'e}rie},
	author = {KHADRAOUI, E and MEESAOUR, R}
}
@proceedings {7459,
	title = {Op{\'e}rationnalisation de la comp{\'e}tence interculturelle dans la formation de formateurs : De l\&rsquo;agir communicationnel {\`a} l\&rsquo;agir professionnel \&raquo; L\&rsquo;interculturel dans la formation des enseignants des langues {\'e}trang{\`e}res : le r{\'e}ussir},
	journal = {Webinaire International organis{\'e} par le d{\'e}partement de fran\c cais et le laboratoire SELNOM Universit{\'e} Batna 2 : 15 D{\'e}cembre~},
	year = {2020},
	address = {Batna, Alg{\'e}rie},
	author = {MEZIANI, A}
}
@article {7518,
	title = {Origines des interf{\'e}rences interlinguales lexicales dans les productions {\'e}crites des apprenants de FLE},
	journal = {Multilinguales},
	volume = {13},
	number = {8},
	year = {2020},
	url = {https://journals.openedition.org/multilinguales/4723$\#$:~:text=De\%20ce\%20fait\%2C\%20les\%20interf\%C3\%A9rences,deuxi\%C3\%A8me\%20langue\%20\%C3\%A9trang\%C3\%A8re\%20(LE2).},
	author = {Laidoudi, Assia}
}
@article {7514,
	title = {Paremie, La Perilleuse (ou L\&rsquo;impossible) Traduction\&hellip;},
	journal = {D{\'e}veloppement des ressources humaines},
	volume = {15},
	number = {2},
	year = {2020},
	pages = {146-155},
	abstract = {Traduire n{\textquoteright}est pas un exercice facile. Alors quand il s{\textquoteright}agit de par{\'e}mie et de phras{\`e}mes, cela devient quasi impossible. Traducteurs, interpr{\`e}tes et traductologues s{\textquoteright}en plaignent constamment. Justement, ce travail cherche {\`a} identifier les difficult{\'e}s diverses soulev{\'e}es par cet exercice d{\'e}licat. L{\textquoteright}objectif de notre intervention est de sensibiliser toutes les personnes concern{\'e}es par la langue dans ses divers usages (linguistes, didacticiens, enseignants praticiens) {\`a} et sur la presque inextricable question de la traduction, sp{\'e}cialement idiomatique et par{\'e}mique. Le pourquoi serait quelquefois dans les {\guillemotleft} {\'e}carts {\guillemotright} subs{\'e}quemment exploit{\'e}s {\`a} savoir, l{\textquoteright}aspect phon{\'e}tique : rime, assonance, etc., l{\textquoteright}aspect lexical: valeur s{\'e}mantique, {\'e}paisseur culturelle et marque chronologique : archa{\"{\i}sme ou n{\'e}ologisme{\textellipsis}},
	url = {https://www.asjp.cerist.dz/en/article/128009},
	author = {Bouzidi, Boubakeur and Bouzidi, Hidayette}
}
@proceedings {7370,
	title = {Pour une meilleure acquisition de la morphographie flexionnelle au Sup{\'e}rieur},
	journal = {Communication au colloque international {\guillemotleft}~Le mot dans la langue et dans le discours 3 : la construction du sens~{\guillemotright}. UNIVERSIT{\'E} DE VILNIUS (Lituanie), FACULT{\'E} DE PHILOLOGIE, 17-18 Septembre},
	year = {2020},
	address = {VILNIUS, Lituanie},
	author = {BELKACEM, M-A}
}
@proceedings {7403,
	title = {Quelles comp{\'e}tences interculturelles dans la formation initiale des enseignants de fran\c cais ? L\&rsquo;interculturel dans la formation des enseignants des langues {\'e}trang{\`e}res : le r{\'e}ussir professoral, l\&rsquo;extr{\^e}me exigence d\&rsquo;un monde plurie},
	journal = {Colloque international organis{\'e} {\`a} l{\textquoteright}universit{\'e} Batna 2 le 15 D{\'e}cembre},
	year = {2020},
	address = {Batna, Alg{\'e}rie},
	author = {ARRAR, S}
}
@article {7552,
	title = {Reminiscence Et Exhumation Memorielle : Memoire Conjugee Dans \&laquo; Terre Des Femmes \&raquo; De Nassira Belloula},
	journal = {Revue alg{\'e}rienne des lettres},
	volume = {4},
	number = {1},
	year = {2020},
	pages = {97-102},
	abstract = {Dans une optique scripturale, le pr{\'e}sent article propose de sp{\'e}culer sur les diff{\'e}rentes strat{\'e}gies adopt{\'e}es dans l{\textquoteright}{\'e}criture romanesque qui permettent de qualifier une {\'e}criture, non pas seulement d{\textquoteright}historique, mais aussi de m{\'e}morielle. Nous aurons {\`a} {\'e}lucider le parcours permettant de mat{\'e}rialiser la m{\'e}moire dans l{\textquoteright}{\o}e}uvre de Nassira Belloula {\guillemotleft} terre des femmes {\guillemotright} et voir, subsidiairement, comment elle a suscit{\'e} la r{\'e}miniscence et le regain m{\'e}moriel notamment {\`a} travers la conjugaison de la m{\'e}moire {\`a} l{\textquoteright}infini en en multipliant les facettes.},
	url = {https://www.asjp.cerist.dz/en/article/114421},
	author = {Lebbal, Sara}
}
@proceedings {7458,
	title = {Une approche cognitive de la cr{\'e}ativit{\'e} : La pens{\'e}e divergente un atout pour l\&rsquo;apprentissage du FLE},
	journal = {Janvier},
	year = {2020},
	address = {LAGHOUAT, Alg{\'e}rie},
	author = {BENCHERIF, S}
}
@proceedings {7238,
	title = {Adaptive Sparse On-line Sequential Autoencoder for Sensors Measurements Compression Applied to Military Aircraft Engines},
	journal = {8thINTERNATIONAL CONFERENCEON DEFENSESYSTEMS: ARCHITECTURES AND TECHNOLOGIES (DAT{\textquoteright}2020) April14-16},
	year = {2020},
	address = {Algiers, Algeria},
	abstract = {In this work a new data-driven compression approach is presented. The compression algorithm is an autoencoder trained with an improved On-line sequential Extreme Learning Machine (OS-ELM). First, a dynamic adaptation of the training algorithm towards the newly coming data is achieved by integrating an updated selection strategy (USS) and dynamic forgetting function (DDF). Second, Singular Value Decomposition (SVD) is involved to enhance hidden layer representation via sparse mapping. This new developed autoencoder (ASOS- AE) is compared with the ordinary OS-ELM autoencoder (OS-AE) and proved its accuracy in CMAPSS dataset (Commercial Modular Aero-Propulsion System Simulation). The C-MAPSS software has revisions in civil and military applications. In the present work we used the military version of its applications.},
	url = {https://www.researchgate.net/publication/340732102_Adaptive_Sparse_On-line_Sequential_Autoencoder_for_Sensors_Measurements_Compression_Applied_to_Military_Aircraft_Engines},
	author = {Berghout, Tarek and Mouss, Leila-Hayet and Ouahab KADRI}
}
@article {7169,
	title = {Aircraft Engines Remaining Useful Life Prediction with an Improved Online Sequential Extreme Learning Machine},
	journal = {Appl. Sci},
	volume = {10},
	number = {3},
	year = {2020},
	abstract = {The efficient data investigation for fast and accurate remaining useful life prediction of aircraft engines can be considered as a very important task for maintenance operations. In this context, the key issue is how an appropriate investigation can be conducted for the extraction of important information from data-driven sequences in high dimensional space in order to guarantee a reliable conclusion. In this paper, a new data-driven learning scheme based on an online sequential extreme learning machine algorithm is proposed for remaining useful life prediction. Firstly, a new feature mapping technique based on stacked autoencoders is proposed to enhance features representations through an accurate reconstruction. In addition, to attempt into addressing dynamic programming based on environmental feedback, a new dynamic forgetting function based on the temporal difference of recursive learning is introduced to enhance dynamic tracking ability of newly coming data. Moreover, a new updated selection strategy was developed in order to discard the unwanted data sequences and to ensure the convergence of the training model parameters to their appropriate values. The proposed approach is validated on the C-MAPSS dataset where experimental results confirm that it yields satisfactory accuracy and efficiency of the prediction model compared to other existing methods.},
	url = {https://www.mdpi.com/2076-3417/10/3/1062},
	author = {Berghout, Tarek and Le{\"{\i}la-Hayet Mouss and Ouahab KADRI and Sa{\"{\i}di, Lotfi and Benbouzid, Mohamed}
}
@proceedings {7266,
	title = {Analysis of Human Skills in Industry 4.0},
	journal = {The Twelfth International Conference on Information, Process, and Knowledge Management (eKNOW 2020)},
	year = {2020},
	abstract = {This paper presents a state-of-the-art of recent research work analyzing the requirements of Industry 4.0, particularly related to the competences issue. Over the last few years, the fourth industrial revolution has attracted researchers worldwide to find suitable solutions. However, there are still many gaps related to the Industry 4.0, particularly related to the humans competences issue. Among the many challenges facing companies in this paradigm, one of the most important is the qualification of employees with the necessary skills to succeed in a transformed work environment. To cope with knowledge and competence challenges related to new technologies and processes of Industry 4.0, new strategic approaches for holistic human resource management are needed in manufacturing companies. The main objective of the presented research is to investigate the importance of employee competences, key to the development of Industry 4.0},
	url = {file:///C:/Users/VRPG/Downloads/eknow_2020_1_40_68008.pdf},
	author = {Fadhila, Djouggane and Samia Aitouche and AKSA, Karima}
}
@proceedings {7264,
	title = {Application of Data Mining in Industry in the Transition Era to Industry 4.0: Review},
	journal = {The Twelfth International Conference on Information, Process, and Knowledge Management (eKNOW 2020)},
	year = {2020},
	abstract = {The era of Industry 4.0 has already begun, however, several improvements should be achieved concerning this revolution. Data mining is one of the modest and efficient tools. Based on a specific query entered in Scopus, related to Industry 4.0, data mining (DM) and logistics, selected documents were studied and analyzed. A brief background of Industry 4.0 and DM are presented. A generic analysis showed that the attentiveness for the cited subject area by countries, universities, authors and especially companies and manufacturers increased through the years. Content analysis reveals that the improvement in quality of the technologies used in manufacturing was noticed, concluding that DM would give Industry 4.0 a leap forward, yet research is dealing with several challenges.},
	url = {file:///C:/Users/VRPG/Downloads/eknow_2020_1_30_68006.pdf},
	author = {Sahraoui, Khaoula and Samia Aitouche and AKSA, Karima}
}
@proceedings {7277,
	title = {Applications of Bayesian networks in Chemical and Process Industries: A review},
	journal = {29th European Safety and Reliability Conference, August 26, 2019},
	year = {2020},
	abstract = {Despite technological advancements, chemical and process industries are still prone to accidents due to their complexity and hazardous installations. These accidents lead to significant losses that represent economic losses and most importantly human losses. Risk management is one of the appropriate tools to guarantee the safe operations of these plants. Risk analysis is an important part of risk management, it consists of different methods such as Fault tree, Bow-tie, and Bayesian network. The latter has been widely applied for risk analysis purposes due to its flexible and dynamic structure. Bayesian networks approaches have shown a significant increase in their application as shown by in the publication in this field. This paper summarizes the result of a literature review performed on Bayesian network approaches adopted to conduct risk assessments, safety and risk analyses. Different application domains are analysed (i.e. accident modelling, maintenance area, fault diagnosis) in chemical and process industries from the year 2006 to 2018. Furthermore, the advantages of different types of Bayesian networks are presented.},
	url = {https://livrepository.liverpool.ac.uk/3054267/1/Overview_of_BN_in_chemical_and_process_industries.pdf},
	author = {Zerrouki, Hamza and Estrada-Lugo, Hector Diego and Hacene SMADI and Patelli, Edoardo}
}
@article {7172,
	title = {Complex network to enhance characterization analysis in modelling product development process},
	journal = {African Journal of Science, Technology, Innovation and Development},
	volume = {21},
	number = {7},
	year = {2020},
	pages = {797-811},
	abstract = {Nowadays, successful and innovative product development is highly correlated with the company{\textquoteright}s success and reason for existence. A development process is a major factor influencing cost, timing and quality of product development. It requires additional attention to decisions made about programme, budget, technical and market risks. In this paper a product development process model is proposed in an innovation context and strategy framework of design process and project management. The process modelling is complex network theory based, to improve characterization analysis for product development process modelling. Required concepts for complex process are established to build product development mathematical model, and provide an overview of key definitions and complex networks advanced tools. Finally, a case study for an Algerian electric generator company is carried out to prove the practicality of the proposed model.},
	url = {https://www.tandfonline.com/doi/abs/10.1080/20421338.2020.1762355?journalCode=rajs20},
	author = {Bencherif, Fateh and Mouss, Leila-Hayet}
}
@mastersthesis {7312,
	title = {Contribution {\`a} la surveillance des syst{\`e}mes de production par les Syst{\`e}mes Multi-Agents Collectifs},
	year = {2020},
	type = {masters},
	author = {Chouhal, Ouahiba}
}
@article {7221,
	title = {Determination and Classification of Explosive Atmosphere Zones While Considering the Height of Discharges},
	journal = {Journal of Failure Analysis and Prevention},
	volume = {20},
	year = {2020},
	pages = {503{\textendash}512},
	abstract = {Prevention and protection of explosions are two notions often used subjectively, and to transform them into operative terms of decision support, it is indispensable to develop quantitative or semiquantitative approaches to determine the hazardous zones. The {\textquotedblleft}classical and point-source{\textquotedblright} approaches that determine ATEX (explosive atmospheres) zones are semiquantitative methods that can meet the requirements of the ATEX directives (Directives 99/92/EC and 94/9/EC). The methodology{\textquoteright}s principle in determining ATEX zones consists in making a comparison with typical examples {\textquotedblleft}classical approach{\textquotedblright} and to identify the source points, determine the degree of discharge, identify the type of the zone, determine the radius of the zone and ultimately the extent and shape of this zone {\textquotedblleft}source point approach.{\textquotedblright} The aim of this work is, on the one hand, to propose and present a classification methodology of the ATEX zones and, on the other hand, to apply the proposed methodology in a hydrocarbon separator.},
	url = {https://link.springer.com/article/10.1007/s11668-020-00851-8},
	author = {Zakarya MIHOUB and Ahmed OUSLATI and Hacene SMADI and Bilal MAY}
}
@article {7209,
	title = {DIGITAL LEARNING WITH COVID-19 IN ALGERIA},
	journal = {INTERNATIONAL JOURNAL OF 3D PRINTING TECHNOLOGIES AND DIGITAL INDUSTRY},
	volume = {4},
	number = {2},
	year = {2020},
	pages = {161-170},
	abstract = {The coronavirus (COVID-19) pandemic poses an unprecedented global challenge, impacting profoundly on health and wellbeing, daily life, and the economy around the world. The COVID-19 pandemic has also changed education forever. The COVID-19 has resulted in schools shut all across the world. Globally, all children at schools or students at universities are out of the classroom. As a result, education has changed dramatically, with the notable rise of e-learning, whereby teaching is undertaken remotely and on digital platforms. Batna 2 University -situated in East of Algeria- is one of the universities suggested after the spread of COVID-19 in March, that online learning has been shown to increase retention of information, and take less time, meaning the changes coronavirus have caused might be here to stay. All institutes and departments, including the Industrial Engineering department, are started using the e-learning Moodle platform to publish courses for all degrees of study and establish online sessions, especially for Ph.D. students.},
	url = {https://dergipark.org.tr/en/download/article-file/1237519},
	author = {Hanane Zermane and Samia Aitouche}
}
@proceedings {7236,
	title = {Dynamic Adaptation for Length Changeable Weighted Extreme Learning Machine},
	journal = {International conferance of intelligent},
	year = {2020},
	address = {Amsterdam, The Netherland},
	abstract = {In this paper, a new length changeable extreme learning machine is proposed. The aim of the proposed method is to improve the learning performances of a Single hidden layer feedforward neural network (SLFN) under rich dynamic imbalanced data. Particle Swarm Optimization (PSO) is involved for hyper-parameters tuning and updating during incremental learning. The algorithm is evaluated using a subset from C-MAPSS (Commercial Modular Aero-Propulsion System Simulation) dataset of gas turbine engine and compared to its derivatives. The results prove that the new algorithm has a better learning attitude. The toolbox that contains the developed algorithms of this comparative study is publicly available.},
	url = {https://www.researchgate.net/publication/337945405_Dynamic_Adaptation_for_Length_Changeable_Weighted_Extreme_Learning_Machine},
	author = {Berghout, Tarek and Mouss, Leila-Hayet and Ouahab KADRI}
}
@conference {7274,
	title = {Efficient Approach for Parallel Machine Scheduling Problem},
	booktitle = {International Colloquium on Logistics and Supply Chain Management (LOGISTIQUA 2018)},
	year = {2020},
	address = {Tangier, Morocco},
	abstract = {In this paper, we consider a parallel machine scheduling problem with non-renewable resources. Each job consumes several components and must be processed in one stage composed of identical parallel machines. Resources availability operations, jobs assignment and sequencing are considered and optimized simultaneously. In order to find an optimal solution, an exact method is applied to optimize the total completion time. Due to the problem complexity and prohibitive computational time to obtain an exact solution, a metaheuristic approach based genetic algorithm is proposed and several heuristics are adapted to solve it. Moreover, the impact of non-renewable resources procurement methods on production scheduling is analyzed. The system performances are evaluated in terms of measures such as the solution quality and the execution time. The simulation results show that the proposed genetic algorithm gives the same results as the exact method for small instances and performs the best compared to heuristics for medium and large instances.},
	url = {https://ieeexplore.ieee.org/document/8428302},
	author = {Belkaid, Fay\c cal and Hadri, Abdelkader and Bennekrouf, Mohammed}
}
@article {7206,
	title = {Enhancement of the competitiveness and the financial capability of a manufacturing process through a new value stream mapping approach},
	journal = {International Journal of Productivity and Quality Management},
	volume = {29},
	number = {4},
	year = {2020},
	abstract = {The organisations having a futuristic look and aiming to impose their presence in the industrial field for a long possible term, are seeking for finding solutions linked to controlling their cash flow and assessing their competitiveness performances. Therefore, the purpose of this paper is to propose a new quality and cost value stream mapping for monitoring the costs consumption and assessing the competitiveness of a company. We use three key concepts namely life cycle costing for estimation of the most influential costs on the manufacturing process, the weighted DPMO and Sigma level for assessing the quality level and the competitiveness of the company. Finally, the data obtained are mapped using value stream mapping method for enabling the determination of dysfunctions in the cost and quality context.},
	url = {https://www.inderscienceonline.com/doi/abs/10.1504/IJPQM.2020.106399},
	author = {Soltani, Mohyiddine and Aouag, Hichem and Mouss, Mohammed-Djamel}
}
@article {7213,
	title = {Enhancement of the competitiveness and the financial capability of a manufacturing process through a new value stream mapping approach},
	journal = {International Journal of Productivity and Quality Management},
	volume = {29},
	number = {4},
	year = {2020},
	abstract = {The organisations having a futuristic look and aiming to impose their presence in the industrial field for a long possible term, are seeking for finding solutions linked to controlling their cash flow and assessing their competitiveness performances. Therefore, the purpose of this paper is to propose a new quality and cost value stream mapping for monitoring the costs consumption and assessing the competitiveness of a company. We use three key concepts namely life cycle costing for estimation of the most influential costs on the manufacturing process, the weighted DPMO and Sigma level for assessing the quality level and the competitiveness of the company. Finally, the data obtained are mapped using value stream mapping method for enabling the determination of dysfunctions in the cost and quality context.},
	url = {https://www.inderscienceonline.com/doi/abs/10.1504/IJPQM.2020.106399},
	author = {Soltani, Mohyiddine and Aouag, Hichem and Mouss, Mohammed-Djamel}
}
@article {7212,
	title = {Enhancement of value stream mapping application process through using fuzzy DEMATEL and fuzzy QFD approaches: a case study considering economic and environmental perspectives},
	volume = {16},
	number = {3},
	year = {2020},
	abstract = {Purpose This paper aims to investigate an integrated approach that aims at enhancing the application process of value stream mapping (VSM) method. It also proposes an extended VSM called Economic and Environmental VSM(E-EVSM). The proposed approach highlights the improvement of economic and environmental performances. Design/methodology/approach The proposed approach has studied the integration of VSM, fuzzy decision-making trial and evaluation laboratory (DEMATEL) and fuzzy quality function deployment (QFD) to improve the economic and environmental performances of manufacturing processes. The VSM method is used for data collection and manufacturing process assessment, whereas fuzzy DEMATEL is used to analyse the current state map. Finally, fuzzy QFD is used to organize the improvement phase of VSM method. Findings The clear findings of this research prove the effectiveness of VSM method on the environmental and economic performances of manufacturing processes. In addition, the proposed approach will show the advantages of fuzzy DEMATEL and fuzzy QFD approaches in improving the application of the VSM method. Research limitations/implications The limitation of this study includes the lack of consideration of other dimensions such as social, technological and managerial. In addition, the proposed approach studied an average set of environmental and economic indicators. Originality/value The novelty of the proposed approach is proved by the development of an extended VSM method (E-EVSM). Also, the proposed approach contributes by a new methodology for analysing and improving the current state map of manufacturing processes.},
	url = {Journal of Modelling in Management},
	author = {Aouag, Hichem and Soltani, Mohyiddine and Mouss, Mohamed-Djamel}
}
@proceedings {7240,
	title = {Global Solar Radiation Forecasting With Evolutionary Autoregressive Models},
	journal = {4th International Conference on Artificial Intelligence in Renewable Energetic Systems (IC-AIRES{\textquoteright}20)},
	year = {2020},
	abstract = {Nowadays, the integration of solar power into the electrical grids is vital to increase energy efficiency and profitability. Effective usage of the instable solar production of photovoltaic (PV) systems necessitates trustworthy forecasting information. Actually, this addition can gives an ameliorated service quality if the solar radiation variation can be forecasted accurately. In this paper, we propose a new forecasting approach that integrates Autoregressive Moving Average (ARMA) and Genetic algorithms (GA) to make benefit of both of them in order to forecast Global Horizontal Irradiance (GHI) component. The proposed approach is compared with the standard ARMA model. The experimental results show that, the proposed approach outperforms the classical ARMA models in terms of mean absolute percentage error (MAPE), root mean squared error (RMSE) coefficient of determination (R)2 and the normalized mean squared error (NMSE).},
	url = {https://www.researchgate.net/publication/349636080_Global_Solar_Radiation_Forecasting_With_Evolutionary_Autoregressive_Models},
	author = {Nahed zemouri and Hassen Bouzgou and Gueymard, Chris}
}
@article {7211,
	title = {HARDWARE IMPLEMENTATION USING XSG OF NEW FAULT DETECTION METHOD APPLIED TO ROBOT MANIPULATOR},
	journal = {Mechatronic Systems and Control},
	year = {2020},
	abstract = {This paper presents a new hardware implementation of a supervision system used in robot manipulators with two degrees of freedom. In addition to the simulation results, the new System Generator tool of Xilinx r is used to ensure self-generation of HDL codes. This code is used to configure field programmable gate arrays (FPGA) devices in the loop, and the supervision system is used mainly to ensure real-time reconfiguration of robots. In the proposed system, we used a new fault detection (FD) method for a viscous friction fault in the supervised robot combined with a fault-tolerance control method. The first module, based on residual analysis, is used to FD and to properly estimate the necessary corrections of the second module. For data transmission between the supervisor and the supervised robots, we used an approach based on the transmission control protocol. The simulation results show that the proposed method adjusts the fault effect using information transferred from the remote supervisor robot. The hardware implementation generated using Xilinx r System Generator is used to validate the proposed contribution and to ensure real-time processing in the case of industrial robots. The simulation results and the response times of both proposed systems are compared and discussed.},
	url = {https://www.actapress.com/Abstract.aspx?paperId=47131},
	author = {Ghrieb, Abdel-O and Kourd, Yahia and Messaoudi, Kamel and Mouss, Mohamed-Djamel and Bakir, Toufik}
}
@article {7171,
	title = {Holonic agent-based approach for system-level remaining useful life estimation with stochastic dependence},
	journal = {International Journal of Computer Integrated Manufacturing},
	volume = {33},
	number = {10},
	year = {2020},
	abstract = {The emerging behavior in complex systems is more complicated than the sum of the behaviors of their constituent parts. This behavior involves the propagation of faults between the parts and requires information about how the parts are related. Therefore, the prognostic function at the system-level becomes a very tough task. Conventional approaches focus on identifying faults and their probabilities of occurrence. In complex systems, this can create statistical limitations for prognostic function where component fault relies on the connected components in the system and their state of degradations. In this paper, a new Holonic agent-based approach is proposed for system-level remaining useful life (S-RUL) estimation with different dependencies. As the proposed approach can capture fault/failure mode propagation and interactions that occur in the system all the way up through the component and eventually system level, it can work as an automatic testing-tool in reliability tasks. Through a numerical example, the implementation is done in Java Agent Development Environment with and without consideration of stochastic dependence. Results show that the indirect effect of influencing components has a massive impact on the S-RUL, and the impact of stochastic dependencies should not be ignored, especially in the early stages of the system design.},
	url = {https://www.tandfonline.com/doi/abs/10.1080/0951192X.2020.1795926?journalCode=tcim20},
	author = {Benaggoune, Khaled and Leila Hayet Mouss and A Abdessemed and Bensakhria, Mohamed}
}
@article {7189,
	title = {HYBRID MULTI-AGENT AND IMMUNE ALGORITHM APPROACH TO HYBRID FLOW SHOPS SCHEDULING WITH SDST},
	journal = {ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING},
	volume = {18},
	number = {3},
	year = {2020},
	abstract = {The existing literature on process scheduling issues have either ignored installation times or assumed that installation times on all machines is free by association with the task sequence. This working arrangement addresses hybrid flow shop scheduling issues under which there are sequence-dependent configuration times referred to as HFS with SDST. This family of production systems are common in industries such as biological printed circuit boards, metallurgy and vehicles and automobiles making. Due to the increasing complexity of industrialized sectors, simple planning systems have failed to create a realistic industrial scheduling. Therefore, a hybrid multi-agent and immune algorithm can be used as an alternative approach to solve complex problems and produce an efficient industrial schedule in a timely manner. We propose in this paper a multi-agent and immune hybrid algorithms for scheduling HFS with SDST. The findings of this paper suggest that the proposed algorithm outperforms some of the existing ones including PSO (particle swarm optimization), GA (Genetic Algorithm), LSA (Local Search Algorithm) and NEHH (Nawaz Enscore and Ham).},
	url = {https://www.ajme.ro/PDF_AJME_2020_3/L15.pdf},
	author = {Abdelhadi, Adel and Mouss, Leila-Hayet and Ouahab KADRI}
}
@article {7175,
	title = {HYBRID MULTI-AGENT AND IMMUNE ALGORITHM APPROACH TO HYBRID FLOW SHOPS SCHEDULING WITH SDST},
	journal = {https://www.ajme.ro/PDF_AJME_2020_3/L15.pdf},
	volume = {18},
	number = {3},
	year = {2020},
	abstract = {The existing literature on process scheduling issues have either ignored installation times or assumed that installation times on all machines is free by association with the task sequence. This working arrangement addresses hybrid flow shop scheduling issues under which there are sequence-dependent configuration times referred to as HFS with SDST. This family of production systems are common in industries such as biological printed circuit boards, metallurgy and vehicles and automobiles making. Due to the increasing complexity of industrialized sectors, simple planning systems have failed to create a realistic industrial scheduling. Therefore, a hybrid multi-agent and immune algorithm can be used as an alternative approach to solve complex problems and produce an efficient industrial schedule in a timely manner. We propose in this paper a multi-agent and immune hybrid algorithms for scheduling HFS with SDST. The findings of this paper suggest that the proposed algorithm outperforms some of the existing ones including PSO (particle swarm optimization), GA (Genetic Algorithm), LSA (Local Search Algorithm) and NEHH (Nawaz Enscore and Ham).},
	url = {https://www.ajme.ro/PDF_AJME_2020_3/L15.pdf},
	author = {Abdelhadi, Adel and Mouss, Leila-Hayet and Ouahab KADRI}
}
@proceedings {7276,
	title = {The impact of products exchange in multi-levels multi-products distribution network},
	journal = {Second International Conference on Embedded \& Distributed Systems (EDiS)},
	year = {2020},
	address = {Oran, Algeria},
	abstract = {In this paper we analyze a problem of inventory management in a multi-levels multi-products distribution network with three echelon, the studied system consists of a central warehouse and three distribution centers identified by their location zones where each center is connected to a wholesaler group that serve the retailers of his region, which in turn feeds the customers of the regions located in the Algerian territory. The aim of this study is to apply a collaboration between the different actors of the same level in a form of an exchange of products, the exchange can occurs only when the actual demand is being received, in order to study the impact of product exchanges in the distribution networks and its influence on the total costs of the logistics chain from the central warehouse to the delivery to the final customer.},
	url = {https://ieeexplore.ieee.org/document/9296441},
	author = {Benfriha, Abdennour -Ilyas and Triqui-Sari, Lamia and Bougloula, Aimade-Eddine and Bennekrouf, Mohammed}
}
@article {7232,
	title = {An Indoor Tutorial For Maintenance And Production: Case Of Textile Batna},
	journal = {khazzartech الاقتصاد الصناعي},
	volume = {10},
	number = {2},
	year = {2020},
	pages = {216-231},
	abstract = {Communication and teamwork are among the most recurrent skills associated with knowledge of engineering sciences. However, their application is not simple, due to the lack of a pedagogical approach that contributes to the development of knowledge based on experience. The problem in factories is the lack of daily self learning to avoid the essential presence of the experts in to resolve problems. In this work, we defined what is a learning organization, what is a tutorial and why a personalized tutorial in a trade, its different forms and steps for the development of a tutorial. After we gave a presentation of the company that is Textile Batna. This article discusses how to design a personalized tutorial, oriented and aimed at learning and knowledge transfer in the industry. By developing this system we aim to build an experimental database serving to preserve the knowledge of the production industry expertise of the Batna textile factory. We have designed a tutorial for the company in the form of a website. For this, the UML language was used. The tutorial features were presented. It helped employees to aquire certain skills without assistance of experts.},
	url = {https://www.asjp.cerist.dz/en/article/141068},
	author = {Ag Hameyni, Abdoulmadjid and Samia Aitouche and Taouririt, Kamel and AKSA, Karima}
}
@proceedings {7262,
	title = {Industrial supervision system based on machine learning SVM technique},
	journal = {International Conference on Robotics, Machine Learning and Artificial Intelligence (ICRMLAI),06 february},
	year = {2020},
	address = {Istanbul, Turkey},
	author = {Hanane Zermane and Mouss, Leila-Hayet and Touahar, Djamel}
}
@article {7207,
	title = {An integrated framework using VSM, AHP and TOPSIS for simplifying the sustainability improvement process in a complex manufacturing process},
	journal = {Journal of Engineering, Design and Technology},
	volume = {18},
	number = {1},
	year = {2020},
	abstract = {Purpose The purpose of this paper is to propose an integrated approach for assessing the sustainability of production and simplifying the improvement tasks in complex manufacturing processes. Design/methodology/approach The proposed approach has been investigated the integration of value stream mapping (VSM), analytic hierarchy process (AHP) and technique for order preference by similarity to ideal solution (TOPSIS). VSM is used as a basic structure for assessing and improving the sustainability of the manufacturing process. AHP is used for weighting the sustainability indicators and TOPSIS for prioritizing the operations of a manufacturing process regarding the improvement side. Findings The results carried out from this study help the managers{\textquoteright} staff in organizing the improvement phase in the complex manufacturing processes through computing the importance degree of each indicator and determining the most influential operations on the production. Research limitations/implications The major limitations of this paper are that one case study was considered. In addition, to an average set of sustainability indicators that have been treated. Originality/value The novelty of this research is expressed by the development of an extended VSM in complex manufacturing processes. In addition, the proposed approach contributes with a new improvement strategy through integrating the multi-criteria decision approaches with VSM method to solve the complexity of the improvement process from sustainability viewpoints.},
	url = {https://www.emerald.com/insight/content/doi/10.1108/JEDT-09-2018-0166/full/html},
	author = {Soltani, Mohyiddine and Aouag, Hichem and Mouss, Mohamed Djamel}
}
@article {7168,
	title = {Intelligent Industrial Process Control Based on Fuzzy Logic and Machine Learning},
	journal = {International Journal of Fuzzy System Applications (IJFSA)},
	volume = {9},
	number = {1},
	year = {2020},
	abstract = {Manufacturing automation is a double-edged sword, on one hand, it increases productivity of production system, cost reduction, reliability, etc. However, on the other hand it increases the complexity of the system. This has led to the need of efficient solutions such as artificial techniques. Data and experiences are extracted from experts that usually rely on common sense when they solve problems. They also use vague and ambiguous terms. However, knowledge engineer would have difficulties providing a computer with the same level of understanding. To resolve this situation, this article proposed fuzzy logic to know how the authors can represent expert knowledge that uses fuzzy terms in supervising complex industrial processes as a first step. As a second step, adopting one of the powerful techniques of machine learning, which is Support Vector Machine (SVM), the authors want to classify data to determine state of the supervision system and learn how to supervise the process preserving habitual linguistic used by operators.},
	url = {https://www.igi-global.com/article/intelligent-industrial-process-control-based-on-fuzzy-logic-and-machine-learning/245272},
	author = {Hanane Zermane and Rached Kasmi}
}
@proceedings {7275,
	title = {Minimizing energy consumption in a Job Shop problem with unidirectional transport constraint},
	journal = {13th International Colloquium of Logistics and Supply Chain Management (LOGISTIQUA)},
	year = {2020},
	address = {Fez, Morocco},
	abstract = {In this work, we introduce the objective of minimizing energy consumption in a job shop scheduling problem with unidirectional transport constraint. In this problem, it is planned to process a set of N jobs (parts) on four machines. The Movement of jobs between these machines is in a single direction that is mean all the parts follow the same direction of movement. Indeed, the energy consumption in this type of problem depends; on the one hand on the speed of the machines processing the jobs and on the other hand on the speed of the means of transport. To solve this optimization problem, we have proposed a metaheuristic method that allows us to find a better sequencing of jobs in order to minimize the cost generated by energy consumption. Several simulations have been studied and the results obtained demonstrate the effectiveness of the proposed approach.},
	author = {Hadri, Abdelkader and Belkaid, Fay\c cal and Bougloula, Aimade-Eddine}
}
@article {7176,
	title = {A new approach agent-based for distributing association rules by business to improve decision process in ERP systems},
	journal = {International Journal of Information and Decision Sciences},
	volume = {12},
	number = {1},
	year = {2020},
	abstract = {Nowadays, the distributed computing plays an important role in the data mining process. To make systems scalable it is important to develop mechanisms that distribute the workload among several sites in a flexible way. Moreover, the acronym ERP refers to the systems and software packages used by organisations to manage day-by-day business activities. ERP systems are designed for the defined schema that usually has a common database. In this paper, we present a collaborative multi-agent based system for association rules mining from distributed databases. In our proposed approach, we combine the multi-agent system with association rules as a data mining technique to build a model that can execute the association rules mining in a parallel and distributed way from the centralised ERP database. The autonomous agents used to provide a generic and scalable platform. This will help business decision-makers to take the right decisions and provide a perfect response time using multi-agent system. The platform has been compared with the classic association rules algorithms and has proved to be more efficient and more scalable.},
	url = {https://www.inderscience.com/info/inarticle.php?artid=104993},
	author = {Zoubeidi, Merouane and Okba KAZAR and BENHARZALLAH, Saber and Mesbahi, Nadjib and Merizig, Abdelhak and Rezki, Djamil}
}
@article {7170,
	title = {New fusion and selection approaches for estimating the remaining useful life using Gaussian process regression and induced ordered weighted averaging operators},
	journal = {Quality and Reliability Engenieering International Journal (QREIJ)},
	volume = {36},
	number = {6},
	year = {2020},
	pages = {2146-2169},
	abstract = {In this paper, we propose new fusion and selection approaches to accurately predict the remaining useful life. The fusion scheme is built upon the combination of outcomes delivered by an ensemble of Gaussian process regression models. Each regressor is characterized by its own covariance function and initial hyperparameters. In this context, we adopt the induced ordered weighted averaging as a fusion tool to achieve such combination. Two additional fusion techniques based on the simple averaging and the ordered weighted averaging operators besides a selection approach are implemented. The differences between adjacent elements of the raw data are used for training instead of the original values. Experimental results conducted on lithium-ion battery data report a significant improvement in the obtained results. This work may provide some insights regarding the development of efficient intelligent fusion alternatives for further prognostic advances.},
	url = {https://onlinelibrary.wiley.com/doi/abs/10.1002/qre.2688},
	author = {Bouzenita, Mohammed and Mouss, Leila-Hayet and Farid Melgani and Bentrcia, Toufik}
}
@proceedings {7263,
	title = {Post Prognostic Decision for Predictive Maintenance Planning with Remaining Useful Life Uncertainty},
	journal = {Prognostics and Health Management Conference (PHM-Besan\c con)},
	year = {2020},
	address = {Besancon, France},
	abstract = {This paper investigates the use of the Particle Swarm Optimization (PSO) algorithm to quantify the effect of RUL uncertainty on predictive maintenance planning. The prediction of RUL is influenced by many sources of uncertainty, and it is required to quantify their combined impact by incorporating the RUL uncertainty in the optimization process to minimize the total maintenance cost. In this work, predictive maintenance of a multi-functional single machine problem is adopted to study the impact of RUL uncertainty on maintenance planning. Therefore, the PSO algorithm is integrated with a random sampling-based strategy to select a sequence that performs better for different values of RUL associated with different jobs. Through a numerical example, results show the importance of optimizing maintenance actions under the consideration of RUL randomness.},
	url = {https://ieeexplore.ieee.org/document/9115558},
	author = {Benaggoune, Khaled and Meraghni, Safa and Ma, Jian and Mouss, Leila-Hayet and Zerhouni, Noureddine}
}
@article {7167,
	title = {Rate of Penetration (ROP) Prediction in Oil Drilling Based on Ensemble Machine Learning},
	journal = {Lecture Notes in Information Systems and Organisation},
	year = {2020},
	author = {Rezki, Djamil and Mouss, Leila-Hayet and Baaziz, Abdelkader and Rezki, Nafissa}
}
@article {7174,
	title = {Rate of Penetration (ROP) Prediction in Oil Drilling Based on Ensemble Machine Learning},
	journal = {ICT for an Inclusive World},
	year = {2020},
	abstract = {This work presents the prediction of the rate of progression in oil drilling based on random forest algorithm, which is part of the family of ensemble machine learning. The ROP parameter plays a very important role in oil drilling, which has a great impact on drilling costs, and its prediction allows drilling engineers to choose the best combination of input parameters for better progress in drilling operations. To resolve this problem, several works have been realized with the different modeling techniques as machine learning: RNAs, Bayesian networks, SVM etc. The random forest algorithm chosen for our model is better than the other MLS techniques. in speed or precision, following what we found in the literature and tests done with the open source machine learning tool on historical oil drilling logs from fields of Hassi Terfa located in southern Algeria.},
	url = {https://link.springer.com/chapter/10.1007/978-3-030-34269-2_37},
	author = {Rezki, Djamil and Leila Hayet Mouss and Baaziz, Abdelkader and Rezki, Nafissa}
}
@inbook {7140,
	title = {Rate of Penetration (ROP) Prediction in Oil Drilling Based on Ensemble Machine Learning},
	booktitle = {ICT for an Inclusive World},
	year = {2020},
	pages = {537-549},
	publisher = {Springer},
	organization = {Springer},
	abstract = {This work presents the prediction of the rate of progression in oil drilling based on random forest algorithm, which is part of the family of ensemble machine learning. The ROP parameter plays a very important role in oil drilling, which has a great impact on drilling costs, and its prediction allows drilling engineers to choose the best combination of input parameters for better progress in drilling operations. To resolve this problem, several works have been realized with the different modeling techniques as machine learning: RNAs, Bayesian networks, SVM etc. The random forest algorithm chosen for our model is better than the other MLS techniques. in speed or precision, following what we found in the literature and tests done with the open source machine learning tool on historical oil drilling logs from fields of Hassi Terfa located in southern Algeria.},
	url = {https://econpapers.repec.org/bookchap/sprlnichp/978-3-030-34269-2_5f37.htm},
	author = {Rezki, Djamil and Mouss, Leila-Hayet and Baaziz, Abdelkader and Rezki, Nafissa}
}
@proceedings {7239,
	title = {Regularization Based Particle Swarm Optimization for Length Changeable Extreme Learning Machine under Health State Estimation of Military Aircraft Engines},
	journal = {8thINTERNATIONAL CONFERENCEON DEFENSESYSTEMS: ARCHITECTURES AND TECHNOLOGIES (DAT{\textquoteright}2020) April14-16,},
	year = {2020},
	address = {Algiers, Algeria},
	abstract = {In this work a new data-driven approach for Remaining Useful Life estimation of aircraft engines is developed. The proposed approach is a regularized Single Hidden Layer Feedforward Neural network (SLFN) with incremental constructive enhancements. The training rules of this algorithm are inspired form different Extreme Learning Machine (ELM) variants. Particle Swarm Optimization (PSO) algorithm is integrated to enhance tracking ability of the best regularization parameter to reduce the norm of the tuned weights. The proposed approach is evaluated using C-MAPSS (Commercial Modular Aero-Propulsion System Simulation) dataset and compared to its other derivatives and proved its accuracy. C-MAPSS software has revisions in military and civil applications. In this paper, the military version of its application is the used one.},
	url = {https://www.researchgate.net/publication/340732320_Regularization_Based_Particle_Swarm_Optimization_for_Length_Changeable_Extreme_Learning_Machine_under_Health_State_Estimation_of_Military_Aircraft_Engines},
	author = {Berghout, Tarek and Mouss, Leila-Hayet and Ouahab KADRI}
}
@proceedings {7235,
	title = {Regularized Length Changeable Extreme Learning Machine with Incremental Learning Enhancements for Remaining Useful Life Prediction of Aircraft Engines},
	journal = {1st International Conference on Communications, Control Systems and Signal Processing (CCSSP), 16-17 May},
	year = {2020},
	address = {El Oued, Algeria},
	abstract = {The main objective of this works is to study and improve the performances of the Single hidden Layer Feedforward Neural network (SLFN) for the application of Remaining Useful Life (RUL) prediction of aircraft engines. The most common problems in SLFNs based old training algorithms such as backpropagation are time consuming, over-fitting and the appropriate network architecture identification. In this paper a new incremental constructive learning algorithm based on Extreme Learning Machine algorithm is proposed for founding the appropriate architecture of a neural network under less computational costs. The aim of the proposed training approach is to study its maximum capabilities during RUL prediction by reducing over-fitting and human intervention. The performances of the proposed approach which are evaluated on C-MAPPS dataset and compared with its original variant from the literature. Experimental results proved that the new algorithm outperforms the old one in many metrics evaluations.},
	url = {https://ieeexplore.ieee.org/document/9151607},
	author = {Berghout, Tarek and Mouss, Leila-Hayet}
}
@proceedings {7237,
	title = {Remaining Useful Life Prediction for aircraft engines with a new Denoising On-Line Sequential Extreme Learning Machine with Double Dynamic Forgetting Factors and Update Selection Strategy},
	journal = {12th Conference on Mechanical Engineering March 17-18, 2020 Ecole Militaire Polytechnique Bordj El Bahri},
	year = {2020},
	address = {Algiers, Algeria},
	url = {https://www.researchgate.net/publication/341509226_Remaining_Useful_Life_Prediction_for_aircraft_engines_with_a_new_Denoising_On-Line_Sequential_Extreme_Learning_Machine_with_Double_Dynamic_Forgetting_Factors_and_Update_Selection_Strategy},
	author = {Berghout, Tarek and Mouss, Leila-Hayet and Ouahab KADRI}
}
@proceedings {7283,
	title = {Reverse Logistics with Disassembly, Assembly, Repair and Substitution},
	journal = {IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)},
	year = {2020},
	address = {Singapore, Singapore},
	abstract = {A reverse logistics planning problem is modeled and analyzed. The model considers returns of a particular electronic device from customers. Some of the collected products are remanufactured or refurbished. Others are disassembled for their key parts which can be considered as good as new. New products are assembled either using new parts or extracted ones. There are two types dynamic demands: demands for remanufactured/refurbished products and demands for new products. Demand of remanufactured/refurbished products can be satisfied using new products in case of shortage. This is a one way downward substitution. The objective is to minimize total costs while satisfying all demands. This problem is formulated as a MILP. The numerical results show that: i) it is hard for a solver to find optimal solutions for the problem in reasonable computational times for several instances with relatively small time horizons and ii) substitution is justified for a certain range of cost and demand parameters.},
	author = {Boutarfa, Youcef and Ahmed, Senoussi and Brahimi, N}
}
@book {7141,
	title = {Routage G{\'e}ographique Bas{\'e} sur le Syst{\`e}me de Coordonn{\'e}es Virtuelles},
	year = {2020},
	edition = {{\'E}ditions universitaires europ{\'e}ennes},
	abstract = {Ce livre pr{\'e}sente un syst{\`e}me de coordonn{\'e}es virtuelles appel{\'e} VCSCClockwise. Ce dernier est libre-GPS et sans points de r{\'e}f{\'e}rence aidant {\`a} cr{\'e}er les coordonn{\'e}es virtuelles. En se basant sur la notion de cluster, ce syst{\`e}me fonctionne parfaitement dans un r{\'e}seau homog{\`e}ne avec une forte connectivit{\'e} en produisant trois coordonn{\'e}es virtuelles uniques associ{\'e}es {\`a} chaque n{\o}e}ud-capteur dans le r{\'e}seau. Declivity est un protocole de routage g{\'e}ographique utilis{\'e} pour tester et {\'e}valuer ce syst{\`e}me de coordonn{\'e}es virtuelles. Ce protocole peut choisir le chemin le plus court avec le minimum de dissipation de l{\textquoteright}{\'e}nergie. En plus, la livraison est toujours garantie que se soit dans un r{\'e}seau homog{\`e}ne avec une forte densit{\'e} ou non.},
	author = {AKSA, Karima}
}
@proceedings {7265,
	title = {A Scientometric Framework: Application for Knowledge Management (KM) in Industry Between 2014 and 2019},
	journal = {The Twelfth International Conference on Information, Process, and Knowledge Management (eKNOW 2020)},
	year = {2020},
	abstract = {It is always difficult to identify the most recent works that have been published, especially those published in recent years, due to delays in putting publications online, citations indexe, etc. Scientometry offers to researchers various concepts, models and techniques that can be applied to knowledge management (KM) in order to explore its foundations, its state, its intellectual core, and its potential future development. To this end, we have developed a scientometric KM framework to calculate the scientometric indexes related to a query introduced in the Scopus database, to facilitate research and monitoring of productivity and collaboration between the authors of KM in particular and also the dissemination of knowledge. The works between 2014 and 2019 are taken, the industry of services was omitted. It might help the decision makers and researchers to optimize their time and efforts. We used Unified Modeling Language (UML) to translate the development ideas of the scientometric framework structure into diagrams, and Delphi 7 to calculate the indexes and ensure other operations of research (about: articles, their authors, conferences, etc). This framework is only valid for Excel files extracted from Scopus or similar format. Finally, the relation between KM and industry 4.0 was established on found articles in Scopus.},
	url = {http://personales.upv.es/thinkmind/dl/conferences/eknow/eknow_2020/eknow_2020_1_10_68003.pdf},
	author = {Samia Aitouche and Sahraoui, Khaoula and AKSA, Karima and Djouggane, Fadhila and Cherrid, Walid and Belayati, Souleyman}
}
@article {7173,
	title = {User behaviour-based approach to define mobility devices needs of disabled person in Algeria: a questionnaire study},
	journal = {Disability and Rehabilitation: Assistive Technology},
	volume = {17},
	number = {4},
	year = {2020},
	pages = {453-461},
	abstract = {This article showcases the adaptability of existing mobility devices for the Algerian disabled population. It aims to develop a behavior model of disabled Algerian persons through (1) development of a theoretical model based on literature review and (2) improvement of this model by using local collected data from our developed questionnaire.},
	url = {https://www.tandfonline.com/doi/abs/10.1080/17483107.2020.1791263},
	author = {Bellal, Salah-Eddine and Mouss, Leila-Hayet and Sahnoun, M{\textquoteright}hammed and Messaadia, Mourad}
}
@article {7114,
	title = {Effect of Long-Term Soil Deformations on RC Structures Including Soil-Structure Interaction},
	journal = {Civil Engineering Journal},
	volume = {6},
	number = {12},
	year = {2020},
	abstract = {Lifetime service of Reinforced Concrete (RC) structures is of major interest. It depends on the action of the superstructure and the response of soil contact at the same time. Therefore, it is necessary to consider the soil-structure interaction in the safety analysis of the RC structures to ensure reliable and economical design. In this paper, a finite element model of soil-structure interaction is developed. This model addresses the effect of long-term soil deformations on the structural safety of RC structures. It is also applied to real RC structures where soil-structure interaction is considered in the function of time. The modeling of the mechanical analysis of the soil-structure system is implemented as a one-dimensional model of a spring element to simulate a real case of RC continuous beams. The finite element method is used in this model to address the nonlinear time behavior of the soil and to calculate the consolidation settlement at the support-sections and the bending moment of RC structures girders. Numerical simulation tests with different loading services were performed on three types of soft soils with several compressibility parameters. This is done for homogeneous and heterogeneous soils. The finite element model of soil-structure interaction provides a practical approach to show and to quantify; (1) the importance of the variability of the compressibility parameters, and (2) the heterogeneity soil behavior in the safety RC structures assessment. It also shows a significant impact of soil-structure interaction, especially with nonlinear soil behavior versus the time on the design rules of redundant RC structures.},
	url = {https://www.civilejournal.org/index.php/cej/article/view/2489},
	author = {Bezih, Kamel and Chateauneuf, Alaa and Demagh, Rafik}
}
@proceedings {7097,
	title = {Experimental model to assess the bearing capacity of inclined loaded foundation near slope},
	journal = {3rd Conference of the Arabian Journal of Geosciences (CAJG), held online, on 2-5 November},
	year = {2020},
	address = {Tunis},
	url = {https://cajg.org/},
	author = {MANSOUR, T and Boufarh, Rafik and SAAD, D}
}
@article {7113,
	title = {Improvement of a Hypoplastic Model for Granular Materials under High Confining Pressures},
	journal = {Geotechnical and Geological Engineering},
	volume = {38},
	year = {2020},
	pages = {3761{\textendash}3771},
	abstract = {The behavior of granular materials during loading depends on the level of stresses. When confining pressure increases, the peak shear strength, the residual shear strength and the stiffness gradually decrease; besides, the volumetric behavior is shown to be influenced by the stress level. In this paper, such effects, due to changes in stress levels, have been incorporated into a modified von Wolffersdorff hypoplastic model. For this purpose, reference void ratios and exponent α and β, the parameters of the original hypoplastic model are modified using experimental data. The performance of the proposed model is demonstrated by using simulated triaxial tests on Hostun sand with cell pressures up to 15\&nbsp;MPa. The study shows the ability of the improved model to highlight the behavior characteristics of granular materials in dilatancy and (peak) resistance under high stress better than the original model.},
	url = {https://link.springer.com/article/10.1007/s10706-020-01256-y},
	author = {Amrane, Moussa and Messast, Salah and Demagh, Rafik}
}
@article {7092,
	title = {Inelastic Response of Soil-Pile-Structure Interaction System under Lateral Loading: A Parametric Study},
	journal = {Jordan Journal of Civil Engineering},
	volume = {14},
	number = {2},
	year = {2020},
	abstract = {Soil-structure interaction is the key to study the behavior of structures under static or dynamic loading. The pile foundation is adopted to transfer loads from the structure to the soil when the structure is embedded in a weak soil stratum. Soil-pile system has a nonlinear behavior; thus, it is more complicated to understand. This study focuses on the numerical investigation of interaction of soil{\textendash}pile{\textendash}structure system (ISPS) and interaction of soil{\textendash}pile system (ISP) under lateral loads. Nonlinear static analysis is carried out considering the lateral capacity of ISPS and ISP systems under lateral loading using pushover analysis. A parametric study concerning different types of axial loading, pile length and pile radius, as well as longitudinal steel ratio in different types of sand is conducted to observe the response of (ISPS) and (ISP) systems. Besides that, lateral capacity deflection and moment curves, as well as the formation of plastic hinge are evaluated for ISPS and ISP systems for a typical pile and various soil types and their results are presented. The results show that the lateral capacity is influenced by the parametric study.},
	url = {https://www.proquest.com/openview/e6a219962ff26b777d51985cc50d6fd3/1?pq-origsite=gscholar\&cbl=2035891},
	author = {Sekhri, Khadidja and Yahiaoui, Djarir and Abbeche, Khelifa}
}
@proceedings {7119,
	title = {Numerical Investigation of Shallow Twin Tunnels Interaction in Soft GroundNumerical Investigation of Shallow Twin Tunnels Interaction in Soft Ground},
	journal = {ITA-AITES World Tunnel Congress, WTC2020 and 46th General Assembly Convention Centre, 11-17 September,},
	year = {2020},
	address = {Kuala Lumpur, Malaysia},
	author = {Zerdia, M and Demagh, Rafik}
}
@article {7112,
	title = {Structural Behavior of Pipelines Buried in Expansive Soils under Rainfall Infiltration (Part I: Transverse Behavior)},
	journal = {Civil Engineering Journal},
	year = {2020},
	abstract = {Landslides, fault movements as well as shrink/swell soil displacements can exert important additional loadings on soil buried structures such as pipelines. These loadings may damage the buried structures whenever they reach the strength limits of the structure material. This paper presents a two-dimensional plane-strain finite element analysis of an 800 mm diameter water supply pipeline buried within the expansive clay of the Ain-Tine area (Mila, Algeria), considering the unsaturated behavior of the soil under a rainfall infiltration of 4 mm/day intensity and which lasts for different time durations (8, 15 and 30 days). The simulations were carried out using the commercial software module SIGMA/W and considering different initial soil suction conditions P1, P2, P3 and P4. The soil surface heave and the radial induced forces on the pipeline ring (i.e., Axial , Shear \&nbsp;forces and bending moments ) results indicated that following the changes of suction the rainfall infiltration can cause considerable additional loads on the buried pipeline. Moreover, these loads are proportionally related to the initial soil suction conditions as well as to the rainfall infiltration time duration. The study highlighted that the unsaturated behavior of expansive soils because of their volume instability are very sensitive to climatic conditions and can exert adverse effects on pipelines buried within such soils. As a result, consistent pipeline design should seriously consider the study of the effect of the climatic conditions on the overall stability of the pipeline structure.},
	url = {https://civilejournal.org/index.php/cej/article/view/2402},
	author = {Bouatia, Mohammed and Demagh, Rafik and Derriche, Zohra}
}
@article {7115,
	title = {Volumetric behavior of natural swelling soil on drying-wetting paths. Application to the Boumagueur marl -Algeria},
	journal = {Studia Geotechnica et Mechanica},
	volume = {42},
	number = {3},
	year = {2020},
	pages = {248 - 262},
	abstract = {This article presents the results of experimental work carried out both in situ (coring; pressuremeter test) and in the laboratory (drying-wetting and oedometric tests) to describe the volumetric behavior on drying-wetting path of a swelling clayey soil of eastern Algeria. In order to perform drying-wetting tests the osmotic technique and saturated salts solutions were used. These suction-imposed methods have gained widespread acceptance as reliable methods for imposing suction on soil specimens. They allowed to sweep a wide range of suctions between 0 and 500 MPa. The ability to impose suction on soil specimens allows for drying and wetting stress paths to be applied to evaluate resulting changes in state parameters (void ratio, degree of saturation and water content). These paths were carried out on specimens with different initial states. Slurries of soil were used to characterize the reference behavior, while the undisturbed soil samples allow to describe the behavior of material under in situ conditions. In the last part of this article and to specify the behavior observed in the saturated domain, a comparison between the resulting deformations of the drying-wetting test and those resulting from the oedometric test was made.},
	url = {https://sciendo.com/es/article/10.2478/sgem-2019-0042},
	author = {Mehdi Mebarki and Kareche, Toufik and Benyahia, Sabah and Derfouf, Feth-Ellah Mounir and Abou-Bekr, Nabil and Taibi, Said}
}
@article {6687,
	title = {Adaptive direct power control for double fed induction generator used in wind turbine, Electrical Power and Energy Systems},
	journal = {International Journal of Electrical Power \& Energy Systems},
	volume = {114},
	year = {2020},
	abstract = {This papers deal with a new Adaptive Direct Power Control for Doubly-Fed Induction Generator of 1.5 MW. The main feature of the proposed strategy is based on the replacement of the fixed switching table by an adaptive one. The online update of the adaptive switching table depends on the reactive power variation and past switching sequences. The proposed adaptive direct power control is compared with Vector Control and Classical Direct Power Control. The robustness of the proposed control scheme against parameter, load and wind speed variations have done with success. The main performance of the Adaptive Direct Power Control strategy is the reduction of powers ripples, thus reduce of torque ripple on the shaft of the\&nbsp;turbine.},
	url = {https://www.sciencedirect.com/science/article/abs/pii/S0142061518326395},
	author = {Mazouz, Farida and Sebti, Belkacem and Ilhami, Colak and Said Drid and Harbouche, Youcef}
}
@mastersthesis {3024,
	title = {Contribution {\`a} la commande d\&rsquo;un a{\'e}rog{\'e}n{\'e}rateur bas{\'e} sur un GSAP},
	year = {2020},
	type = {mastersDoctorat},
	abstract = {Cette th{\`e}se traite la mod{\'e}lisation, le contr{\^o}le et la simulation d{\textquoteright}un syst{\`e}me de conversion d{\textquoteright}{\'e}nergie {\'e}olienne {\`a} base d{\textquoteright}une machine synchrone {\`a} aimants permanents (GSAP) connect{\'e}e au r{\'e}seau. Il est n{\'e}cessaire de lier cette g{\'e}n{\'e}ratrice avec la charge ou le r{\'e}seau par des convertisseurs statiques susceptibles d{\textquoteright}am{\'e}liorer la qualit{\'e} d{\textquoteright}{\'e}nergie en tension et fr{\'e}quence en utilisant des techniques ad{\'e}quates de commande. L{\textquoteright}{\'e}tude consiste {\`a} impl{\'e}menter des strat{\'e}gies de contr{\^o}le pour assurer une meilleure qualit{\'e} d{\textquoteright}{\'e}nergie. Apr{\`e}s la mod{\'e}lisation de la cha{\^{\i}ne de conversion d{\textquoteright}{\'e}nergie {\'e}olienne compl{\`e}te avec exploitation de la commande MPPT, une application de la commande directe du couple bas{\'e}e sur des r{\'e}gulateurs {\`a} hyst{\'e}r{\'e}sis et la commande DTC-SVM sont introduites {\`a} la machine pour mettre en {\'e}vidences les performances de ces derni{\`e}res. D{\textquoteright}apr{\`e}s les r{\'e}sultats de simulation obtenus, la commande DTC-SVM pr{\'e}sente de meilleures performances par rapport {\`a} la DTC classique et la commande vectorielle},
	url = {http://eprints.univ-batna2.dz/1870/1/these\%20bensaadi\%20hacene.pdf},
	author = {Bensaadi, Hacene}
}
@mastersthesis {1679,
	title = {Contribution {\`a} la commande d\&rsquo;un MASDE. Apport des techniques de l\&rsquo;intelligence artificielle},
	year = {2020},
	type = {mastersDoctorat},
	abstract = {Cette th{\`e}se a pour but d{\textquoteright}apporter une contribution au contr{\^o}le DTC de la MASDE. Plusieurs structures ont {\'e}t{\'e} d{\'e}velopp{\'e}es ces structures concernant la combinaison de diff{\'e}rentes techniques de commandes intelligentes avec l{\textquoteright}apport des techniques d{\textquoteright}optimisations. Dans ce contexte une commande floue type 1 et flou type 2 ont {\'e}t{\'e} pr{\'e}sent{\'e}e avec l{\textquoteright}utilisation des techniques PSO et AG dont le but est d{\textquoteright}am{\'e}liorer les performances de la MASDE, avec ces techniques les oscillations de flux et couple sont r{\'e}duites, et la r{\'e}ponse dynamique du syst{\`e}me a {\'e}t{\'e} am{\'e}lior{\'e}e. Dans ce travail, nous avons aussi d{\'e}velopp{\'e} une autre technique qui r{\'e}duit les oscillations de couple et de flux, cette technique que nous avons appel{\'e}e commande DTC hybride bas{\'e}e sur le mode glissant d{\textquoteright}ordre sup{\'e}rieur flou-T2. L{\textquoteright}ensemble des r{\'e}sultats obtenus a montr{\'e} satisfaction quant aux performances atteintes par le syst{\`e}me. Celles-ci sont traduites par la robustesse de la commande vis-{\`a}-vis des incertitudes param{\'e}triques de la MASDE.},
	url = {http://eprints.univ-batna2.dz/1885/1/these\%20final.pdf},
	author = {Ghoulemallah Boukhalfa}
}
@mastersthesis {3028,
	title = {Contribution {\`a} l\&rsquo;{\'e}tude et la mod{\'e}lisation d\&rsquo;une pompe p{\'e}ristaltique},
	year = {2020},
	type = {mastersTh{\`e}se de Doctorat},
	abstract = {Ce travail est bas{\'e} sur l{\textquoteright}{\'e}tude et la simulation num{\'e}rique du comportement de la micropompe pi{\'e}zo{\'e}lectrique {\`a} mouvement p{\'e}ristaltique. La nature de l{\textquoteright}actionneur pi{\'e}zo{\'e}lectrique est un disque pi{\'e}zo{\'e}lectrique PZT-5H (Titano-Zirconate de Plomb) et le diaphragme est un dioxyde de silicium (SiO2). En appliquant l{\textquoteright}approche FSI (Fluid-Structure Interaction), la simulation de la micropompe sans valves est r{\'e}alis{\'e}e au moyen du logiciel Comsol 3.5 Multiphysics. La d{\'e}formation d{\^u}e {\`a} la tension appliqu{\'e}e aux bornes du disque pi{\'e}zo{\'e}lectrique entra{\^{\i}ne un d{\'e}placement de la membrane, et par la meme la circulation du fluide. A partir des r{\'e}sultats obtenus, la conception optimale a n{\'e}cessit{\'e} respectivement une {\'e}paisseur de 0.5 mm pour la membrane et pour l{\textquoteright}actionneur pi{\'e}zo{\'e}l{\'e}ctrique. L{\textquoteright}{\'e}tude des effets de la tension sur la d{\'e}flexion du diaphragme et la nature du fluide sur le d{\'e}bit de la micropompe a {\'e}t{\'e} men{\'e}e et des r{\'e}sultats de simulation probants ont {\'e}t{\'e} obtenus},
	url = {http://eprints.univ-batna2.dz/1858/1/Th\%C3\%A8se\%20BARKAT\%20TOUFIK.pdf},
	author = {Barkat, Toufik}
}
@mastersthesis {3029,
	title = {Contribution au contr{\^o}le intelligent d\&rsquo;un syst{\`e}me {\'e}olien base sur une MADA sans balais},
	year = {2020},
	type = {mastersTh{\`e}se de Doctorat},
	abstract = {Ce travail pr{\'e}sente des techniques de commande robustes d{\'e}di{\'e}es au syst{\`e}me {\'e}olien bas{\'e} sur la machine asynchrone {\`a} double alimentation sans balais (MADASB) entrain{\'e}e par une turbine {\`a} calage variable des pales. Le stator de puissance de la machine est directement reli{\'e} au r{\'e}seau {\'e}lectrique ; par contre le stator de commande est aliment{\'e} par un convertisseur bidirectionnel. Les MADASB promettent des avantages significatifs pour les syst{\`e}mes de conversion d{\textquoteright}{\'e}nergie {\'e}olienne en raison de leurs faibles co{\^u}ts et une plus grande fiabilit{\'e} par rapport aux machines asynchrones {\`a} double alimentation classiques (MADA). L{\textquoteright}id{\'e}e principale consiste {\`a} appliquer diff{\'e}rentes techniques de commande pour le contr{\^o}le ind{\'e}pendant des puissances active et r{\'e}active g{\'e}n{\'e}r{\'e}es par la MADASB d{\'e}coupl{\'e}e par la technique de commande vectorielle. Il s{\textquoteright}agit particuli{\`e}rement de la commande par logique floue et des commandes par mode glissant d{\textquoteright}ordre un et de second ordre bas{\'e}e sur l{\textquoteright}algorithme du Super-Twisting, la commande par retour d{\textquoteright}{\'e}tat et la commande par backstepping. Une {\'e}tude comparative relative aux performances obtenues par les commandes propos{\'e}es est men{\'e}e. Les r{\'e}sultats de simulation montrent que ces m{\'e}thodes hi{\'e}rarchis{\'e}es, poss{\`e}dent de grandes performances dans le contr{\^o}le de tels syst{\`e}mes en termes de poursuite de la r{\'e}f{\'e}rence, de d{\'e}couplage, de temps de r{\'e}ponse et de la qualit{\'e} du courant.},
	url = {http://eprints.univ-batna2.dz/1861/1/doctorat-Oussama.pdf},
	author = {Moussa, Oussama}
}
@mastersthesis {1702,
	title = {Contr{\^o}le les puissances actives et r{\'e}actives dans les a{\'e}rog{\'e}n{\'e}rateurs doubles aliment{\'e}s},
	year = {2020},
	type = {mastersDoctorat},
	abstract = {Cette th{\`e}se a pour but d{\textquoteright}apporter une contribution au contr{\^o}le direct des puissances d{\textquoteright}une chaine de conversion d{\textquoteright}{\'e}nergie {\'e}olienne {\`a} base d{\textquoteright}une GADA en faisant varier la vitesse de l{\textquoteright}{\'e}olienne en r{\'e}ponse au changement de la vitesse du vent afin d{\textquoteright}optimiser l{\textquoteright}{\'e}nergie {\'e}olienne extraite et de concevoir une commande robuste face aux incertitudes param{\'e}triques. Plusieurs structures ont {\'e}t{\'e} d{\'e}velopp{\'e}es ces structures concernant la combinaison de d{\'e}f{\'e}rentes techniques de commandes pour aboutir {\`a} des meilleurs r{\'e}sultats. Dans ce contexte une commande adaptative pour le contr{\^o}le des puissances de la GADA a {\'e}t{\'e} pr{\'e}sent{\'e}e, avec cette technique les oscillations des puissances sont r{\'e}duites, la r{\'e}ponse dynamique du syst{\`e}me a {\'e}t{\'e} am{\'e}lior{\'e}e. Dans ce travail, nous avons aussi d{\'e}velopp{\'e} une autre technique qui r{\'e}duit les oscillations des puissances, cette technique que nous avons appel{\'e} DPC bas{\'e}e sur le mode glissant d{\textquoteright}ordre sup{\'e}rieur. L{\textquoteright}ensemble des r{\'e}sultats obtenus a montr{\'e} satisfaction quant aux performances atteintes par le syst{\`e}me. Celles-ci sont traduites par la robustesse de la commande vis-{\`a}-vis des incertitudes param{\'e}triques de la GADA},
	url = {http://eprints.univ-batna2.dz/1859/1/MAZOUZ\%20farida\%20these\%20doctorat\%20ELT\%202020.pdf},
	author = {Mazouz, Farida}
}
@article {6693,
	title = {Evaluation of the High Performance Indirect Field Oriented Controlled Dual Induction Motor Drive Fed by a Single Inverter using Type-2 Fuzzy Logic Control},
	journal = {Engineering, Technology \& Applied Science Research},
	volume = {10},
	number = {5},
	year = {2020},
	pages = {6301-6308},
	abstract = {In this paper, a high-performance indirect field-oriented controlled dual Induction Motor (IM) drive fed by a single inverter using type-2 fuzzy logic control will be presented. At first, the mathematical model of the IM is implemented in the d-q reference frame. Then, the speed control of the Dual Induction Motor (DIM) operating in parallel configuration with Indirect Field Oriented Control (IFOC) using PI and type-2 Fuzzy Logic Controller (T2-FLC) will be presented. For the control of this system, a DC supply and a Space Vector Pulse Width Modulation (SVPWM) voltage source inverter are introduced with constant switching frequency. Also, the performance of T2-FLC, which is based on the IFOC, is tested and compared to those achieved using the PI controller. The simulation results demonstrate that the T2-FLC is more robust, efficient, and has superior dynamic performance for traction system applications.},
	url = {https://etasr.com/index.php/ETASR/article/view/3799},
	author = {Bounab, Alaeddine and Chaiba, Azeddine and Sebti, Belkacem}
}
@proceedings {6686,
	title = {Fuzzy Control with Adaptive Gain of DFIG based WECS},
	journal = {4th International Conference on Artificial Intelligence in Renewable Energetic Systems IC-AIRES2020},
	year = {2020},
	abstract = {In this paper, a direct vector control using fuzzy logic controller with adaptive gain for a doubly fed induction generator (DFIG) based wind energy conversion system (WECS) is presented. The performance of fuzzy controllers is characterized by unsatisfactory performance: (wide overshoot, excessive oscillations and sensitivity to parametric variations). We propose a robust method, where the control gain will be continually adapted with the use of a set of fuzzy rules; we only consider the gain adaptation of the command. I mean the value of the gain will be determined by a rule base defined by the error and the variation of the error. Finally, the control of the active and reactive powers using a fuzzy logic controller with adaptive gain is simulated using software Matlab/Simulink, studies on a 1.5 MW DFIG wind generation system compared with the conventional fuzzy logic controller. Performance and robustness results obtained are presented and analyzed. KEY WORDS Wind energy conversion system ; Vector control ; Fuzzy logic controller ; Adaptive fuzzy logic controller.},
	url = {https://www.researchgate.net/publication/353742338_Fuzzy_Control_with_Adaptive_Gain_of_DFIG_based_WECS},
	author = {Choug, N and Said Benaggoune and Sebti, Belkacem}
}
@article {6690,
	title = {Hybrid Fuzzy Reference Signal Tracking Control of a Doubly Fed Induction Generator},
	journal = {International Journal of Engineering, IJE TRANSACTIONS A: Basics},
	volume = {33},
	number = {4},
	year = {2020},
	pages = {567-574},
	abstract = {This paper presents a hybrid scheme for the control of active and reactive powers using the direct vector control with stator flux orientation (SFO) of the DFIG. The hybrid scheme consists of Fuzzy logic, Reference Signal Tracking (F-RST) controllers. The proposed (F-RST) controller is compared with the classical Proportional-Integral (PI) and the Polynomial (RST) based on the pole placement theory. The various strategies are analyzed and compared in terms of tracking, robustness, and sensitivity to the speed variation. Simulations are done using MATLAB software. The simulation results prove that the proposed approach leads to good performances such as the tracking test, the rejection of disturbances and the robustness concerning the parameter variations. The hybrid controller is much more efficient compared to those of PI and RST controller, it also improves the performance of the powers and ensures some important strength despite the parameter variation of the DFIG.},
	url = {https://iranjournals.nlai.ir/bitstream/handle/123456789/336773/9E6B4620EFF728DA18A66028C9F96615.pdf?sequence=-1\&isAllowed=y},
	author = {Choug, N and Said Benaggoune and Sebti, Belkacem}
}
@article {article,
	title = {Improved field oriented control for stand alone dual star induction generator used in wind energy conversion},
	journal = {Engineering Review},
	volume = {40},
	year = {2020},
	month = {04},
	pages = {34},
	abstract = {This paper presents a novel direct rotor flux oriented control with online estimation of magnetizing current and magnetizing inductance applied to self-excited dual star induction generator equipping a wind turbine in remote sites. The induction generator is connected to nonlinear load through two PWM rectifiers. The fuzzy logic controller is used to ensure the DC bus voltage a constant value when changes in speed and load conditions. In this study, a performance comparison between the conventional approach and the novel approach is made. The proposed control strategy is validated by simulation in Matlab/Simulink.},
	doi = {10.30765/er.40.2.05},
	url = {https://hrcak.srce.hr/236550},
	author = {BENDJEDDOU, YACINE and Abdessemed, Rachid and MERABET, ELKHEIR}
}
@mastersthesis {3027,
	title = {Mod{\'e}lisation et strat{\'e}gie de commande de la g{\'e}n{\'e}ratrice asynchrone int{\'e}gr{\'e}e {\`a} un syst{\`e}me {\'e}olien},
	year = {2020},
	type = {mastersTh{\`e}se de Doctorat},
	abstract = {Les {\'e}nergies renouvelables prennent ces derni{\`e}res ann{\'e}es un axe d{\textquoteright}investigation pour les chercheurs. Pour cette raison, notre {\'e}tude est consacr{\'e}e {\`a} l{\textquoteright}application des diff{\'e}rentes commandes non lin{\'e}aires {\`a} la g{\'e}n{\'e}ratrice asynchrone double aliment{\'e}e (GADA) int{\'e}gr{\'e}e dans un syst{\`e}me de conversion de l{\textquoteright}{\'e}nergie {\'e}olienne. En premier lieu on pr{\'e}sente l{\textquoteright}application de la commande vectorielle associ{\'e}e {\`a} un syst{\`e}me {\'e}olien. Pour raison d{\textquoteright}am{\'e}lioration des performances, des commandes avanc{\'e}es de type Mode Glissant (MG) et Backstepping (Back) sont appliqu{\'e}es {\`a} la GADA-{\'e}olienne afin d{\textquoteright}assurer un d{\'e}couplage entre les puissances active et r{\'e}active pour des vitesses fixe et variable avec des performances souhait{\'e}es. La strat{\'e}gie MPPT (Maximum Power Point Track) pour extraire le maximum de puissance pendant la conversion est d{\'e}velopp{\'e}e. Aussi, la technique SVM (Space Vector Modulation) est appliqu{\'e}e. L{\textquoteright}{\'e}tude comparative des diff{\'e}rentes commandes {\'e}tudi{\'e}es {\`a} travers les r{\'e}sultats des simulations montre une am{\'e}lioration significative des performances des contr{\^o}leurs non lin{\'e}aires, Backstepping (Back) et Mode Glissant (MG) propos{\'e}s par rapport au contr{\^o}leur vectoriel en termes de r{\'e}ponse dynamique, de rejet des perturbations et des variations param{\'e}triques},
	url = {http://eprints.univ-batna2.dz/1875/1/thesefinal_2.pdf},
	author = {Douadi, Tarek}
}
@article {6689,
	title = {Neuro-fuzzy Sliding Mode Controller Based on a Brushless Doubly Fed Induction Generator},
	journal = {International Journal of Engineering,IJE TRANSACTIONS B: Applications},
	volume = {33},
	number = {2},
	year = {2020},
	pages = {248-25},
	abstract = {The combination of neural networks and fuzzy controllers is considered as the most efficient approach for different functions approximation, and indicates their ability to control nonlinear dynamical systems. This paper presents a hybrid control strategy called Neuro-Fuzzy Sliding Mode Control (NFSMC) based on the Brushless Doubly fed Induction Generator (BDFIG). This replaces the sliding surface of the control to exclude chattering phenomenon caused by the discontinuous control action. This technique offers attractive features, such as robustness to parameter variations. Simulations results of 2.5 KW BDFIG have been presented to validate the effectiveness and robustness of the proposed approach in the presence of uncertainties with respect to vector control (VC) and sliding mode control (SMC). We compare the static and dynamic characteristics of the three control techniques under the same operating conditions and in the same simulation configuration. The proposed controller schemes (NFSMC) are effective in reducing the ripple of active and reactive powers, effectively suppress sliding-mode chattering and the effects of parametric uncertainties not affecting system performance.},
	url = {https://iranjournals.nlai.ir/bitstream/handle/123456789/336089/0677E777FB6D5E7E0591C23F4302267F.pdf?sequence=-1\&isAllowed=y},
	author = {Ouada, L and Said Benaggoune and Sebti, Belkacem}
}
@proceedings {6809,
	title = {Artificial Neural Networks for Fault Diagnosis of Milk Pasteurization Process - A Comparative Study},
	journal = {International Conference on Industrial Engineering and Operations Management , March 10-12},
	year = {2020},
	address = {Dubai, UAE},
	abstract = {The increasing complexity of most industrial processes always tends to create problems in monitoring and supervision systems. Detection and early fault diagnosis are the best way to manage and solve these problems. Artificial neural networks (ANNs), by their ability to learn and store a large volume of information, are tools particularly suitable for diagnostic support systems. Effectiveness of ANNs for fault diagnosis in milk pasteurization process is presented in this paper. The initial data base used for fault diagnosis is constructed using data extracted from FMEA (Failure Modes and Effects Analysis) tables of milk pasteurization process. Indeed, this analysis makes it possible to establish the links of cause and effect between the faulty components and the observed symptoms. Three models of ANNs, namely Feed-Forward Back Propagation (FFBP), Radial Basis Function based Neural Network (RBNN), and Generalized Regression Neural Networks (GRNN) are developed and compared. The determination coefficient (R2 ), Root Mean Square Error (RMSE), and Mean Absolute Error (MAE) statistics were used as evaluation criteria of all the models. The comparison results indicate that the performances of GRNN model are better than the FFBP and RBNN models. The same neuronal models can be extended to any technical system by considering appropriate parameters and defects.},
	url = {http://www.ieomsociety.org/ieom2020/papers/603.pdf},
	author = {Samia Chebira and Noureddine Bourmada and Abdelali Boughaba}
}
@article {5619,
	title = {A conceptual framework for risk matrix capitalization},
	journal = {Int J SystAssurEngManag. 2020,},
	year = {2020},
	abstract = {Research on risk matrices show that there is considerable diversity in the practice of designing risk matrices. This has led to serious problems of standardization and communication. Indeed, these problems affect at the same time on the development of matrices and in their exploitation in term of risk assessment. To solve these problems, this paper proposes an experience feedback method that aims to capitalize the feedback invariants resulting from the analysis of existing risk matrices. This capitalization allows developing a theoretical framework of the robust risk matrices design. The application of the proposed method for examples of matrices confirms the interest of articulating these risk matrices designs through an argument based on experience feedback. In this sense, the merit of the proposed experience feedback method is that it promotes the sharing of knowledge between the actors involved in a risk assessment.},
	url = {https://doi.org/10.1007/s13198-020-00949-0},
	author = {H HADEF and DJEBABRA, M}
}
@article {5618,
	title = {Contribution to the ageing control of on shore oil and gas fields},
	journal = {Petroleum, 2020,},
	year = {2020},
	abstract = {The ageing of the Algerian oil and gas (O\&amp;G) installations has led to many incidents. Such installations are over 30 years old (life cycle) and still in operation. To deal with this O\&amp;G crucial problem, the Algerian authorities have launched a rehabilitation and modernization schedule of these installations. Within the framework of this program, many audit operations are initiated to elaborate a general diagnosis of the works to be performed while optimizing production. In other words, industrial ageing risks shall be controlled. In the process safety management (PSM) context, the aim of this paper is to study ageing problem of the Algerian industrial installations through proposed indicators. Their prioritization adjusted by (TOPSIS) Technique for Order-Preference by Similarity to Ideal Solution method which allows identification of ageing control solutions of Algerian onshore fields.},
	url = {https://doi.org/10.1016/j.petlm.2019.11.006},
	author = {Y BELMAZOUZI and M DJBABRA and H HADEF}
}
@article {5613,
	title = {Decision making under uncertainty in the alarm systems response},
	journal = {International Journal of Quality \& Reliability Management, ahead-of-print. 2020.},
	year = {2020},
	abstract = {Purpose The purpose of this paper is to develop an advanced decision-making support for the appropriate responding to critical alarms in the hazardous industrial facilities. Design/methodology/approach A fuzzy analytical hierarchy process is suggested by considering three alternatives and four criteria using triangular fuzzy numbers to handle the associated uncertainty. A logarithmic fuzzy preference programming (LFPP)-based nonlinear priority method is employed to analyze the suggested model. Findings A quantitative decision-making support is not only a necessity in responding to critical alarms but also easy to implement even in a relatively short reaction time. Confirmation may not be the appropriate option to deal with a critical alarm, even with the availability of the needed resources. Practical implications A situation related to a flammable gas alarm in a gas plant is treated using the developed model showing its practical efficiency and practicality. Originality/value The proposed model provides a rational, simple and holistic fuzzy multi criteria tool with a refined number of criteria and alternatives using an LFPP method to handle process alarms.},
	url = {http://doi.org/10.1108/IJQRM-03-2019-0078},
	author = {A SI-MOHAMMED and R SMAIL and MCHEBILA}
}
@article {5614,
	title = {A design approach towards sustainable buildings in Algeria},
	journal = {", Smart and Sustainable Built Environment, Vol. ahead-of-print. 2020,},
	year = {2020},
	abstract = {Purpose The purpose of this paper is to achieve the national strategic agenda{\textquoteright}s criteria that aim for accomplishing sustainable buildings by estimating the effects of energy efficiency measures in order to reduce energy consumption and CO2 emission. Design/methodology/approach A design approach has been developed based on simulation software and a modeled building. Therefore, a typical office building is considered for testing five efficiency measures in three climatic conditions in Algeria. This approach is conducted in two phases: first, the analysis of each measure{\textquoteright}s effect is independently carried out in terms of cooling energy and heating energy intensities. Then, a combination of optimal measures for each climate zone is measured in terms of three sustainable indicators: final energy consumption, energy cost saving and CO2 emission. Findings The results reveal that a combination of optimal measures has a substantial impact on building energy saving and CO2 emission. This saving can rise to 41 and 31 percent in a hot and cold climate, respectively. Furthermore, it is concluded that obtaining higher building performance, different design alternatives should be adapted to the climate proprieties and the local construction materials must be applied. Originality/value This study is considered as an opportunity for achieving the national strategy, as it may contribute in improving office building performance and demonstrating a suitable tool to assist stakeholders in the decision making of most important parameters in the design stage for new or retrofit buildings.},
	url = {http://doi.org/10.1108/SASBE-04-2019-0057},
	author = {Rahmouni, S and R SMAIL}
}
@article {5625,
	title = {Generalized markovian consideration of common cause failures in the performance assessment of safety instrumented systems},
	journal = {Process Safety and Environmental Protection},
	volume = {2018},
	number = {141(9)},
	year = {2020},
	pages = {28-36.},
	abstract = {Aiming to provide a generalized method for assessing the performance of safety instrumented systems with a flexible and accurate consideration of the common cause failures{\textquoteright} contribution. This paper is devoted to the development of a direct way to generate the transition rate matrix associated with the continuous-time Markov model of any typical KooN architecture using any parametric model. Such a choice is considered after a detailed comparison of the ability of several dependability methods (e.g., fault trees, reliability block diagrams, Markov models, Bayesian networks, etc) to provide simple representations and genuine results in this context. To validate the developed method, the unavailability and the unconditional failure intensity of a wide range of configurations are quantified using the Binomial Failure Rate model and compared to those of the complete fault tree implementation.},
	url = {https://doi.org/10.1016/j.psep.2020.05.009},
	author = {MCHEBILA}
}
@article {5617,
	title = {Improving barrier and operational risk analysis (BORA) using criticality importance analysis case study: oil and gas separator},
	journal = {World Journal of Engineering, Vol. ahead-of-print. 2020,},
	year = {2020},
	abstract = {Purpose The purpose of this paper is to show the impact of operational and environmental conditions (risk influencing factors) on the component criticality of safety barriers, safety barrier performance and accidents frequency and therefore on risk levels. Design/methodology/approach The methodology focuses on the integration of criticality importance analysis in barrier and operational risk analysis method, abbreviated as BORA-CIA. First, the impact of risk influencing factors (RIFs) associated with basic events on safety barrier performance and accident frequency is studied, and then, a risk evaluation is performed. Finally, how unacceptable risks can be mitigated regarding risk criteria is analyzed. Findings In the proposed approach (BORA-CIA), the authors show how specific installation conditions influence risk levels and analyze the prioritization of components to improve safety barrier performance in oil and gas process. Practical implications The proposed methodology seems to be a powerful tool in risk decision. Ordering components of safety barriers taking into account RIFs allow maintenance strategies to be undertaken according to the real environment far from average data. Also, maintenance costs would be estimated adequately. Originality/value In this paper, an improved BORA method is developed by incorporating CIA. More precisely, the variability of criticality importance factors of components is used to analyze the prioritization of maintenance actions in an operational environment.},
	url = {https://doi.org/10.1108/WJE-04-2019-0129},
	author = {M BOURARECHE and Nait-Said, R and Zidani, F and N OUAZRAOUI}
}
@proceedings {6808,
	title = {La pr{\'e}vention des risques psychosociaux au travail : une perspective juridique},
	journal = {Colloque International sur les pratiques des intervenants pr{\'e}ventives, {\'e}ducatives et th{\'e}rapeutiques en psychologie de la sant{\'e}, Universit{\'e} d{\textquoteright}Alger 2, 10 \& 11 Mars},
	year = {2020},
	address = {Alger, Alg{\'e}rie},
	author = {Baziz, A and Chaib, R and M{\'e}barek Djebabra}
}
@article {5615,
	title = {Multi-criterion analysis based on integrated process-risk optimization J},
	journal = {ournal of Engineering, Design and Technology , Vol. ahead-of-print 2020,},
	year = {2020},
	abstract = {Purpose This paper aims to propose a process optimization approach showing how organizations are able to achieve sustainable and efficient process optimization, based on integrated process-risk analysis using several criteria to a better decision-making. Design/methodology/approach Several approaches are used (functional/dysfunctional) to analyze how processes work and how to deal with risks forming multi-criteria decision-making. In addition, a risk factor is integrated into the structured analysis and design techniques (SADT) method forming a novel graphical view SADT-RISK; it identifies process{\textquoteright}s failures using the traditional failure modes, effects and criticality analysis (FMECA) and economic consideration {\textquotedblleft}failure mode and effect, criticality analysis-cost FMECA-C{\textquotedblright} making a multi-criterion matrix for better decision-making. Subsequently, some recommendations are proposed to overcome the failure. Findings This paper illustrates a methodology with a case study in a company, which has a leading brand in the market in Algeria. The authors are integrating a varied portfolio of approaches linking with each other to analyze, improve and optimize the processes in terms of reliability and safety to deal with risks; reduce the complexity of the systems; increase the performance; and achieve a safer process. However, the proposed method can be readily used in practice. Originality/value The paper provides a new approach based on integrated management using new elements as an innovative contribution, forming a novel graphical view SADT-RISK; it identifies process{\textquoteright}s failures using the traditional FMECA and economic consideration {\textquotedblleft}a new multi-criterion matrix for better decision-making and using the SWOT analysis {\textendash} Strengths, Weaknesses, Opportunities, Threats {\textendash} as a balance to decide about the process improvement{\textquotedblright}. The authors conclude that this methodology is oriented and applicable to different types of companies such as financial, health and industrial as illustrated by this case study.},
	url = {http://doi.org/10.1108/JEDT-08-2019-0201},
	author = {R DERRADJI and R HAMZI}
}
@proceedings {6810,
	title = {Performance of the fireproof system: Algerian case Study},
	journal = {8th Eur. Conf. Ren. Energy Sys. 24-25 August},
	year = {2020},
	address = {Istanbul, Turkey},
	author = {Marref, S and S CHETTOUH}
}
@article {5623,
	title = {Preliminary hazard identification for risk assessment on a complex system for hydrogen production},
	journal = {International Journal of Hydrogen Energy,},
	number = {45(20)},
	year = {2020},
	pages = {11855-11865},
	abstract = {Renewable power generation facilities are constantly expanding due to the expected depletion of fossil fuels and the increasingly demanding policy of pollution control. Having said that, hydrogen is one of the promising energy sources. That said, hydrogen chain safety is an unescapable parameter that should continuously coexist with the development of hydrogen domain. In this context, this article presents a contribution to the risk analysis and evaluation of a complex hydrogen production system {\textquoteright}EGA-9000{\textquoteright} at CIEMAT (Centre for Research on Energy, Environment and Technology - Madrid, Spain). The methodology followed in this study revolves around the risk analysis process through a FAST (Functional Analysis System Technique) functional analysis method and a HAZOP (HAZard and Operability) dysfunctional analysis method. The evaluation of the thirty-three scenarios identified by the risk analysis shows that the studied system is insecure. Indeed, five scenarios at an unacceptable level of risk. And it is noted that the risk of fire and explosion is the major risk for all scenarios studied. To this end, safety measures (recommendation) have been proposed based on the weaknesses detected by the risk analysis carried out.},
	url = {https://doi.org/10.1016/j.ijhydene.2019.10.162},
	author = {H HADEF and B NEGROU and T GONZALEZ-AVUSO and M DJBABRA and M RAMADAN}
}
@article {5624,
	title = {Using Fuzzy-Improved Principal Component Analysis (PCA-IF) for Ranking of Major Accident Scenarios},
	journal = {Arabian Journal of Science and Engineering,},
	number = {Vol. 45},
	year = {2020},
	pages = {pp. 2235-2245.},
	abstract = {The industrial risk mapping is a topical problem in the field of risk management that attracts many researchers to develop risk matrices to ensure consultation between their actors. In this context, this paper aims to propose the principal component analysis (PCA) method as support for this consultation. Indeed, the use of PCA method is justified by its robustness for aggregate initial data associated with industrial risks as principal factors and ranking of this risk in terms of their criticalities in risk matrices. However, the aggregation of initial data on industrial risks by the main factors, in some cases, leads to inaccuracies which make it difficult to classify certain risks. This paper proposes two variants of PCA method to solve this inaccuracy and succeeds in classifying risks according to their respective criticalities, namely PCA-Improved (PCA-I) and PCA-I-Fuzzy (PCA-IF). The results come from the PCA application and its proposed variants (PCA-I and PCA-IF) on an example of accident scenarios ranking. We have established a scientific basis for the capitalization of mapping tool for consultation and decision support to industrial risk managers.},
	url = {https://doi.org/10.1007/s13369-019-04233-7},
	author = {H HADEF and DJEBABRA, M}
}
@proceedings {7075,
	title = {Fuzzy Logic Controller in a Speed Control for Doubly Fed Induction Machine (DFIM)},
	journal = {2nd International Conference on Natural and Applied Science And Engineering (ICNASEN {\textendash} 2020)~ 21 {\textendash} 25 October},
	year = {2020},
	address = {ANTALYA, TURKEY},
	author = {Naceri, Farid and Saidi, A and Youb, Lamia}
}
@article {7069,
	title = {Hybrid Fuzzy Reference Signal Tracking Control of a Doubly Fed Induction Generator},
	journal = {International Journal of Engineering (IJE)},
	volume = {33},
	number = {4},
	year = {2020},
	pages = {567-574},
	abstract = {This paper presents a hybrid scheme for the control of active and reactive powers using the direct vector control with stator flux orientation (SFO) of the DFIG. The hybrid scheme consists of Fuzzy logic, Reference Signal Tracking (F-RST) controllers. The proposed (F-RST) controller is compared with the classical Proportional-Integral (PI) and the Polynomial (RST) based on the pole placement theory. The various strategies are analyzed and compared in terms of tracking, robustness, and sensitivity to the speed variation. Simulations are done using MATLAB software. The simulation results prove that the proposed approach leads to good performances such as the tracking test, the rejection of disturbances and the robustness concerning the parameter variations. The hybrid controller is much more efficient compared to those of PI and RST controller, it also improves the performance of the powers and ensures some important strength despite the parameter variation of the DFIG.},
	url = {https://www.ije.ir/article_106029.html},
	author = {N. Choug and Said Benaggoune and Sebti Belkacem}
}
@article {7070,
	title = {Hybrid Fuzzy Reference Signal Tracking Control of a Doubly Fed Induction Generator},
	journal = {International Journal of Engineering (IJE)},
	volume = {33},
	number = {4},
	year = {2020},
	pages = {567-574},
	abstract = {This paper presents a hybrid scheme for the control of active and reactive powers using the direct vector control with stator flux orientation (SFO) of the DFIG. The hybrid scheme consists of Fuzzy logic, Reference Signal Tracking (F-RST) controllers. The proposed (F-RST) controller is compared with the classical Proportional-Integral (PI) and the Polynomial (RST) based on the pole placement theory. The various strategies are analyzed and compared in terms of tracking, robustness, and sensitivity to the speed variation. Simulations are done using MATLAB software. The simulation results prove that the proposed approach leads to good performances such as the tracking test, the rejection of disturbances and the robustness concerning the parameter variations. The hybrid controller is much more efficient compared to those of PI and RST controller, it also improves the performance of the powers and ensures some important strength despite the parameter variation of the DFIG.},
	url = {https://www.ije.ir/article_106029.html},
	author = {N. Choug}
}
@article {7073,
	title = {Neuro-fuzzy Sliding Mode Controller Based on a Brushless Doubly Fed Induction Generator},
	journal = {IJE TRANSACTIONS B: Applications},
	volume = {33},
	number = {2},
	year = {2020},
	pages = {248-256},
	abstract = {The combination of neural networks and fuzzy controllers is considered as the most efficient approach for different functions approximation, and indicates their ability to control nonlinear dynamical systems. This paper presents a hybrid control strategy called Neuro-Fuzzy Sliding Mode Control (NFSMC) based on the Brushless Doubly fed Induction Generator (BDFIG). This replaces the sliding surface of the control to exclude chattering phenomenon caused by the discontinuous control action. This technique offers attractive features, such as robustness to parameter variations. Simulations results of 2.5 KW BDFIG have been presented to validate the effectiveness and robustness of the proposed approach in the presence of uncertainties with respect to vector control (VC) and sliding mode control (SMC). We compare the static and dynamic characteristics of the three control techniques under the same operating conditions and in the same simulation configuration. The proposed controller schemes (NFSMC) are effective in reducing the ripple of active and reactive powers, effectively suppress sliding-mode chattering and the effects of parametric uncertainties not affecting system performance.},
	url = {https://www.ije.ir/article_103373.html},
	author = {Ouada, L and Benaggounea, Said and Sebti Belkacem}
}
@article {7074,
	title = {Robust Wheel Slip for Vehicle Anti-lock Braking System with Fuzzy Sliding Mode Controller (FSMC)},
	journal = {Engineering, Technology \& Applied Science Research},
	volume = {10},
	number = {5},
	year = {2020},
	pages = {6368-6373},
	abstract = {Anti-lock Braking System (ABS) is used in automobiles to prevent slipping and locking of wheels after the brakes are applied. Its control is a rather complicated problem due to its strongly nonlinear and uncertain characteristics. The aim of this paper is to investigate the wheel slip control of the ground vehicle, comprising two new strategies. The first strategy is the Sliding Mode Controller (SMC) and the second one is the Fuzzy Sliding Mode Controller (FSMC), which is a combination of fuzzy logic and sliding mode, to ensure the stability of the closed-loop system and remove the chattering phenomenon introduced by classical sliding mode control. The obtained simulation results reveal the efficiency of the proposed technique for various initial road conditions.},
	url = {https://etasr.com/index.php/ETASR/article/view/3830},
	author = {S LATRECHE and Said Benaggoune}
}
@article {4755,
	title = {Three Level Inverter Based Unified Power Flow Controller, ISSN 1755-6398},
	journal = {International Journal of Power Electronics},
	volume = {11},
	number = {2},
	year = {2020},
	pages = {195 - 210},
	abstract = {Unified power flow controller is a power electronics-based device utilised to improve transmission line capacity and control power flow transmitted by power transmission systems. This paper presents the application of the decoupled control strategy to control independently active and reactive power in the event of changes in the step points of the powers. Two types of controllers are used to handle the control strategy proposed: conventional PI regulator and fuzzy logic PI regulator. The fuzzy logic controller must have high performance to handle the problem of adjustment of power decoupling. Also, a three level neutral point controller inverter is used in both series and shunt parts of the UPFC to get multistep voltage wave and improve the power quality.},
	url = {https://www.inderscience.com/info/inarticle.php?artid=105148},
	author = {Khoukha Berrahal and Abd El Malik Bouhentala and Ahmed Bensalem}
}
@article {7063,
	title = {Two Types of Fuzzy Logic Controllers for the Speed Control of the Doubly-Fed Induction Machine},
	journal = {Advances in Electrical and Computer Engineering},
	volume = {20},
	number = {3},
	year = {2020},
	abstract = {The paper presents two fuzzy logic control algorithms: type-1 and type-2. These two nonlinear techniques are used for adjust the speed control with a direct stator flux orientation control of a doubly fed induction motor. The effectiveness of the proposed control strategy is evaluated under different operating conditions such as of reference speed and for load torque step changes at nominal parameters and in the presence of parameter variation (stator resistance, rotor resistance and moment of inertia). The results of the simulation of the doubly fed induction motor velocity control have shown that fuzzy type-2 ensures better dynamic performances with respect to fuzzy type-1 control, even by parametric variations and external disturbances.},
	url = {http://staff.univ-batna2.dz/sites/default/files/naceri_farid/files/aece_2020_3_8.pdf},
	author = {Saidi, Abderazak and Naceri, Farid and Youb, Lamia and Cernat, Mihai and Pesquer, Luis Guasch}
}
@proceedings {6987,
	title = {Comportement {\`a} la fatigue du stent biod{\'e}gradable : Cas de la diastole et de la systole},
	journal = {Congres Alg{\'e}rien de M{\'e}canique CAM2019 Ghardaia 23-26 F{\'e}vrier},
	year = {2020},
	author = {Ameddah, Hacene and Lounansa, Salim and Mazouz, Hammoudi}
}
@article {6955,
	title = {Corrosion inhibition of Fe-19Cr stainless steel by glutamic acid in 1M HCl},
	journal = {Chemical Data Collections},
	volume = {28},
	year = {2020},
	abstract = {Electrochemical methods, weight loss and surface analysis technique were used to study the effect of glutamic acid on the corrosion of Fe-19Cr stainless steel in 1\&nbsp;M hydrochloric acid solution. Results revealed that the corrosion inhibition of glutamic acid of Fe-19Cr in 1\&nbsp;M HCl was enhanced in the presence of the iodide ions due to synergistic effect. In the absence of KI, the inhibition of Fe-19Cr corrosion by glutamic acid was glutamic acid concentration dependent. Potentiodynamic polarization curves demonstrated that glutamic acid acts as a mixed type inhibitor. Self-Assembled Monolayers of glutamic acid were able to protect stainless steel from corrosion effectively. The adsorption of the inhibitor onto the stainless steel surface follows Langmuir adsorption isotherm. The value of free energy of the adsorption indicated that there is a physical interaction between the glutamic acid and the stainless steel surface.},
	url = {https://www.sciencedirect.com/science/article/abs/pii/S2405830020301646},
	author = {Hamadi, Latifa and Kareche, Abdelhak and Mansouri, Salah and BENBOUTA, Soumia}
}
@article {6930,
	title = {CUTTING TOOL LIFE AND ITS EFFECT ON SURFACE ROUGHNESS WHEN TURNING WITH WC-6\% CO},
	journal = {International Journal of Modern Manufacturing Technologies},
	volume = {XII},
	number = {2},
	year = {2020},
	abstract = {During turning operations, tool-part-chip contact causes wear to the cutting tool. The objective of this work is to study the wear of the clearance faces of tungsten carbide cutting tools during turning operations. Experimental tests on tool life for dry turning operations were carried out at four different cutting speeds, where the feed rate and the depth of cut are kept at constant values: 0.08 mm/rev for feed rate and 0.5 mm for depth of cut. An analysis of the influence of cutting parameters on the tools wear and consequently tool life (Τ) was presented, then the roughness of the machined surface Ra and the morphology of the chips produced were studied. This study makes it possible to identify that the wear mechanisms and the tool life are strongly linked to the roughness of the machined surfaces and to the morphology of the chips produced during the turning operations.},
	url = {https://modtech.ro/international-journal/vol12no22020/01_Mourad_Bendifallah.pdf},
	author = {Bendifallah, Mourad and Mourad Brioua and Belloufi, Abderrahim}
}
@proceedings {6991,
	title = {Improvement Inspection Method for Rapid Prototyping of an involute spur gears for an Additive Manufacturing process.},
	journal = {International Conference on 3D Printing and Additive Manufacturing November 23-24, Webinar, From your imagination to a 3D model},
	year = {2020},
	address = {Dubai, UAE},
	author = {Selloum, Rabia and Ameddah, Hacene and Mourad Brioua}
}
@conference {6976,
	title = {Inspection on a Three-Dimensional Measuring Machine for a Virtual Model for Additive Manufacturing},
	booktitle = {International Conference on Advances in Mechanical Engineering and Mechanics},
	year = {2020},
	pages = {138{\textendash}143},
	address = {Advances in Mechanical Engineering, Materials and Mechanics},
	abstract = {Today, and to quickly meet the high demands of variability, supply chain efficiency and energy optimization, business markets are looking for modern manufacturing technologies and as a solution, industry 4.0 is using the benefits of integrating modern manufacturing technologies and information systems to promote production capabilities. In this context, intelligent industry represents a new generation of automatic production systems based on the concepts of intelligent industry, intelligent manufacturing, control and intelligent inspection, such as inspection on coordinate measuring machines (CMMs). This technology allows many machines to be integrated into a plant and controlled online using the MBD (Model Based Design) quality system. The problem of conformity of parts with complex geometry is becoming more and more important. The objective of this work is to present a 3D inspection technique on a virtual model (MBD: Model Based Design), using a coordinate measuring machine equipped with a {\textquotedblleft}POWER INSPECT{\textquotedblright} measurement and inspection software. The interest of this technique is to show the impact of the dimensional inspection and geometric tolerance process of the CAD model for the CAI (Computer aided Inspection) approach on the fidelity of the finished product for additive manufacturing (AM) including intelligent industry.},
	url = {https://link.springer.com/chapter/10.1007/978-3-030-52071-7_20},
	author = {Ameddah, Hacene and Selloum, Rabia and Mourad Brioua}
}
@proceedings {6985,
	title = {Inspection sur une machine {\`a} mesurer tridimensionnelle en vue d\&rsquo;un tol{\'e}rancement d\&rsquo;un mod{\`e}le virtuel pour la fabrication additive,},
	journal = {Congres Alg{\'e}rien de M{\'e}canique CAM2019 Ghardaia 23-26 F{\'e}vrier},
	year = {2020},
	author = {Selloum, Rabia and Ameddah, Hacene and Mourad Brioua}
}
@proceedings {6986,
	title = {L\&rsquo;utilisation de la fabrication additive en ing{\'e}nierie tissulaire pour le cas d\&rsquo;une implantation tissulaire dans le d{\'e}faut osseux de la jambe},
	journal = {Congres Alg{\'e}rien de M{\'e}canique CAM2019 , 23-26 F{\'e}vrier},
	year = {2020},
	address = {Ghardaia, Alg{\'e}rie},
	author = {Ali-Alkebsi, Ebrahim-Ahmedd and Amedah, Hacene and Outtas, Touffik}
}
@proceedings {6990,
	title = {Non-Destructive Evaluation for an Exactitude Reproduction of Form by Reverse Engineering in an Additive Manufacturing Process.},
	journal = {ASTM International Conference on Additive Manufacturing ICAM2020, November 16-20, Webinar},
	year = {2020},
	author = {Selloum, Rabia and Ameddah, Hacene and Mourad Brioua}
}
@proceedings {6996,
	title = {Optimal shape reproduction of an intervertebral prosthesis \&ldquo;COFLEX\&rdquo; for additive manufacturing},
	journal = {7th International Conference Integrity-Reliability-Failure. J.F. Silva Gomes and S.A. Meguid (editors), INEGI-FEUP (2020),},
	year = {2020},
	pages = {487-488},
	author = {Amaddah, Hacene and Mourad Brioua}
}
@conference {6933,
	title = {OPTIMAL SHAPE REPRODUCTION OF AN INTERVERTEBRAL PROSTHESIS \&ldquo;COFLEX\&rdquo; FOR ADDITIVE MANUFACTURING},
	booktitle = {7th International Conference Integrity-Reliability-Failure},
	year = {2020},
	pages = {487-488},
	publisher = {J.F. Silva Gomes and S.A. Meguid (editors), INEGI-FEUP},
	organization = {J.F. Silva Gomes and S.A. Meguid (editors), INEGI-FEUP},
	abstract = {The coflex Interlaminar Technology is an interlaminar stabilization device indicated for use in one or two level lumbar stenosis from L1-L5. It is used in skeletally mature patients with at least moderate impairment in function who experience relief in flexion from their symptoms of leg/buttocks/groin pain, with or without back pain, and who have undergone at least 6 months of non-operative treatment. Our study is focused on the evaluation and biomechanical analysis of osteosynthesis implants and in particular the Corflex-F implant to redefine a new approach to the "Coflex" interspinatus implant using particles swarm optimisation for additive manufacturing, then to study these biomechanical performances.},
	url = {https://paginas.fe.up.pt/~irf/Proceedings_IRF2020/data/papers/17493.pdf},
	author = {Ameddah, Hacene and Mourad Brioua}
}
@article {6926,
	title = {Groundwater modelling of the Tebessa-Morsott alluvial aquifer (northeastern Algeria): A geostatistical approach},
	journal = {Groundwater for Sustainable Development},
	volume = {11},
	year = {2020},
	abstract = {This paper studies aquifer{\textquoteright}s hydrodynamic behavior by combining a flow-simulation model with\&nbsp;transmissivity\&nbsp;optimization (cokriging) in order to provide an optimal management scheme for the groundwater aquifer. The use of a cokriging approach improves the\&nbsp;transmissivity\&nbsp;data which are insufficient for the database of the\&nbsp;groundwater flow\&nbsp;simulation model. The obtained results are then used to model the\&nbsp;groundwater flow\&nbsp;of the Tebessa-Morsott shallow aquifer, located in NE Algeria, under a steady and transient regime. The results of the model calibration for the steady-state (year 2010) show that the recharge by rainfall and\&nbsp;leakage\&nbsp;rate are similar compared to those calculated by the analytical approach, (84,354\&nbsp;m3/day for the recharge and 36,986\&nbsp;m3/day for pumped water flow rate). The results of the transient regime show the alluvial aquifer affected by large drawdowns reaching 40\&nbsp;m over 20 years (year 2030 scenario) due to increase in water exploitation from pumping wells to answer water needs of the Tebessa region.},
	url = {https://www.sciencedirect.com/science/article/abs/pii/S2352801X1930311X},
	author = {Drias, Tarek and Khedidja, Abdelhamid and Belloula, Moufida and Badraddine, Saadali and Saibi, Khedoudj}
}
@article {6925,
	title = {Identifying groundwater degradation sources in a Mediterranean coastal area experiencing significant multi-origin stresses},
	journal = {Science of The Total Environment},
	volume = {746},
	year = {2020},
	abstract = {This study investigates the multiple contamination sources of a coastal Mediterranean aquifer in northeastern Algeria that is bordered by two rivers and neighboring densely populated areas. Hydrogeochemical and isotopic groundwater characterization is carried out, including the analyses of major elements, water\&nbsp;stable isotopes\&nbsp;δ2H-H2O and δ18O-H2O, and stable isotopes of nitrate δ15N-NO3\&nbsp;and δ18O-NO3, and then integrated into the history of land use over the study area. Groundwater nitrate concentrations ranging from 1.6 to 235\&nbsp;mg/L with a median value of 69\&nbsp;mg/L are evidence of the degradation of groundwater quality induced by\&nbsp;anthropogenic sources. The combined of δ15N-NO3\&nbsp;and δ18O-NO3\&nbsp;ratios showed that nitrate in groundwater is attributable to (i) the uncontrolled development of inadequate private sanitation systems over the study area, and (ii) the unsafe application of animal manure to fertilize crops. Very active\&nbsp;saltwater intrusion\&nbsp;is confirmed by several hydrogeochemical indicators. Interestingly, the intrusion mechanism appears to be more complex than a direct intrusion from the Mediterranean Sea. During the high-water period, saltwater intrusion may also originate from the two rivers bordering the aquifer, via upstream migration of seawater through the river mouths. The heavier ratios in δ2H-H2O and δ18O-H2O of surface water collected from the rivers suggest that water from the Mediterranean Sea is mixing with water in the rivers. Multi-source contamination not only contributes to complex chemical reactions within the aquifer, but also contributes, via the\&nbsp;cumulative effect\&nbsp;of the various sources, to affecting large parts of the study area. The present study may serve as a warning to the effect that historical land-use practices may exert seriously deleterious impacts on groundwater quality and greatly limit conditions for the sustainable management of Mediterranean coastal areas.},
	url = {https://www.sciencedirect.com/science/article/abs/pii/S004896972034732X},
	author = {Boumaiza, Lamine and Chesnaux, Romain and Drias, Tarek and Walter, Julien and Huneau, Fr{\'e}d{\'e}ric and Garel, Emilie and Knoeller, Kay and Stumpp, Christine}
}
@proceedings {6902,
	title = {The best known interior point algorithm for thec linear optimization},
	journal = {3rd~International Conference on Mathematics and Statistics, February 6-8, American University of Sharijah},
	year = {2020},
	address = {Sharijah, UAE.},
	author = {Djeffal, El-Amir}
}
@article {6869,
	title = {Coupled System of Nonlinear HyperbolicEquations with Variable-Exponents: GlobalExistence and Stability},
	journal = {Mediterr. J. Math},
	volume = {17},
	number = {166},
	year = {2020},
	abstract = {In this paper, we consider a coupled system of two nonlinearhyperbolic equations with variable-exponents in the damping and sourceterms. Under suitable assumptions on the intial data and the variableexponents, we prove a global existence theorem, using the Stable-setmethod. Then, we establish a decay estimate of the solution energy, byKomornik{\textquoteright}s integral approach.},
	url = {https://doi.org/10.1007/s00009-020-01589-1},
	author = {Bouhoufani, Oulia and Hamchi, Ilhem}
}
@article {6870,
	title = {Design of nonstationary wavelets through thepositive solution of Bezout\&$\#$39;s equation},
	journal = {Journal of Interdisciplinary Mathematics},
	volume = {24},
	number = {3},
	year = {2020},
	pages = {1-13},
	abstract = {In this paper, we present a new technique for constructing a nonstationary wavelet. The key idea relies on the following: for each wavelet level, we solve the Bezout{\textquoteright}s equation and we propose a positive solution over the interval [{\textendash}1, 1]. Using the Bernstein{\textquoteright}s polynomials we approximate this proposed positive solution with the intention to perform a spectral factorization.},
	url = {DOI:10.1080/09720502.2020.1792102},
	author = {Brahimi, Mahmoud and Melkemi, Khaled and Boussaad, Abdelmallk}
}
@article {6871,
	title = {Global existence and stability of a nonlinear wave equation with variable-exponent nonlinearities},
	journal = {Applicable Analysis},
	volume = {99},
	number = {8},
	year = {2020},
	abstract = {In this paper, we consider a nonlinear wave equation with damping and source terms of variable-exponent types. First, we use the stable-set method to prove a global result. Then, by applying an integral inequality due to Komornik, we obtain the stability result.},
	url = {https://www.tandfonline.com/doi/abs/10.1080/00036811.2018.1530760},
	author = {Ghegal, Samah and Hamchi, Ilhem and Messaoudi, Salim A.}
}
@article {6868,
	title = {On the global solvability of the axisymmetric Boussinesq system with critical regularity},
	journal = {Nonlinear Analysis},
	volume = {200},
	year = {2020},
	abstract = {The current paper is principally motivated by establishing the global wellposedness to the three-dimensional Boussinesq system with zero diffusivity in thesetting of axisymmetric flows without swirling with v0 ∈ H12(R3) ∩ B˙ 30,1(R3) anddensity ρ0 ∈ L2(R3)∩B˙ 30,1(R3). This respectively enhances the two results recentlyaccomplished in Danchin and Paicu (2008) and Hmidi and Rousset (2010). Ourformalism is inspired, in particular for the first part from Abidi (2008) concerningthe axisymmetric Navier{\textendash}Stokes equations once v0 ∈ H12(R3) and external forcef ∈ L2 loc(R+; Hβ(R3)), with β \&gt; 1 4 . This latter regularity on f which is thedensity in our context is helpless to achieve the global estimates for Boussinesqsystem. This technical defect forces us to deal once again with a similar proof tothat of Abidi (2008) but with f ∈ Lβ loc(R+; L2(R3)) for some β \&gt; 4. Second, weexplore the gained regularity on the density by considering it as an external forcein order to apply the study already obtained to the Boussinesq system.},
	url = {https://doi.org/10.1016/j.na.2020.112003},
	author = {Houamed, Haroune and Zerguine, Mohamed}
}
@article {6867,
	title = {ON THE GLOBAL WELL-POSEDNESS OF THEAXISYMMETRIC VISCOUS BOUSSINESQ SYSTEM INCRITICAL LEBESGUE SPACES},
	journal = {DISCRETE AND CONTINUOUS DYNAMICAL SYSTEMS},
	volume = {40},
	number = {11},
	year = {2020},
	pages = {6473-6506},
	abstract = {The contribution of this paper will be focused on the global existence and uniqueness topic in three-dimensional case of the axisymmetric viscous Boussinesq system in critical Lebesgue spaces. We aim at deriving analogous results for the classical two-dimensional and three-dimensional axisymmetric Navier-Stokes equations recently obtained in [19, 20]. Roughly speaking, we show essentially that if the initial data (v0; ρ0) is axisymmetricand (!0; ρ0) belongs to the critical space L1({\textohm}) {\texttimes}L1(R3), with !0 is the initialvorticity associated to v0 and {\textohm} = f(r; z) 2 R2 : r \&gt; 0g, then the viscousBoussinesq system has a unique global solution.},
	url = {doi:10.3934/dcds.2020287},
	author = {Hanachi, Adalet and Houamed, Haroune and Zerguine, Mohamed}
}
@article {62955,
	title = {3D investigation of the channel cross-section configuration effect on the power delivered by PEMFCs with straight channels},
	journal = {FuelFuel},
	volume = {263},
	year = {2020},
	month = {2020},
	pages = {116713},
	isbn = {0016-2361},
	author = {Abdallah Mohammedi and Youcef Sahli and Hocine Ben Moussa}
}
@article {62970,
	title = {Adaptive direct power control for double fed induction generator used in wind turbine},
	journal = {International Journal of Electrical Power \& Energy SystemsInternational Journal of Electrical Power \& Energy Systems},
	volume = {114},
	year = {2020},
	month = {1/1/2020},
	abstract = {This papers deal with a new Adaptive Direct Power Control for Doubly-Fed Induction Generator of 1.5 MW. The main feature of the proposed strategy is based on the replacement of the fixed switching table by an adaptive one. The online update of the adaptive switching table depends on the reactive power variation and past switching sequences. The proposed adaptive direct power control is compared with Vector Control and Classical Direct Power Control. The robustness of the proposed control scheme against parameter, load and wind speed variations have done with success. The main performance of the Adaptive Direct Power Control strategy is the reduction of powers ripples, thus reduce of torque ripple on the shaft of the turbine.},
	author = {Mazouz, F. and Belkacem, S. and Colak, I. and Drid, S. and Harbouche, Y.}
}
@article {62975,
	title = {Adsorption of iron phthalocyanine on a Au (111) surface},
	journal = {Russian Journal of Physical Chemistry ARussian Journal of Physical Chemistry A},
	volume = {94},
	year = {2020},
	month = {2020},
	pages = {1704-1707},
	isbn = {1531-863X},
	author = {Mabrouk, Manel and Hayn, Roland and Ben Chaabane, Rafik}
}
@article {63107,
	title = {Aircraft engines Remaining Useful Life prediction with an adaptive denoising online sequential Extreme Learning Machine},
	journal = {Engineering Applications of Artificial IntelligenceEngineering Applications of Artificial Intelligence},
	volume = {96},
	year = {2020},
	month = {2020},
	pages = {103936},
	isbn = {0952-1976},
	author = {Berghout, Tarek and Mouss, Le{\"\i}la-Hayet and Ouahab KADRI and Sa{\"\i}di, Lotfi and Benbouzid, Mohamed}
}
@article {63106,
	title = {Aircraft engines remaining useful life prediction with an improved online sequential extreme learning machine},
	journal = {Applied SciencesApplied Sciences},
	volume = {10},
	year = {2020},
	month = {2020},
	pages = {1062},
	author = {Berghout, Tarek and Mouss, Le{\"\i}la-Hayet and Ouahab KADRI and Sa{\"\i}di, Lotfi and Benbouzid, Mohamed}
}
@article {63032,
	title = {Analysis of social resilience to the novel coronavirus (covid-19) in algeria},
	journal = {Geomatics, Landmanagement and LandscapeGeomatics, Landmanagement and Landscape},
	year = {2020},
	month = {2020},
	isbn = {2300-1496},
	author = {Habibi, Yahyaoui and Guellouh, Sami and ABDELWAHHAB FILALI and Berchiche, Razika}
}
@proceedings {63112,
	title = {An ANFIS-based Computation to Study the Degradation-related Ageing effects in Nanoscale GAA-TFETs},
	journal = {Proceedings of the 10th International Conference on Information Systems and Technologies},
	year = {2020},
	month = {2020},
	pages = {1-5},
	author = {Bentrcia, Toufik and Djeffal, Faycal and Ferhati, Hichem}
}
@article {63129,
	title = {Apoptotic Cell Death in Ewe Endometrium during the Oestrous Cycle},
	journal = {Journal of the Hellenic Veterinary Medical SocietyJournal of the Hellenic Veterinary Medical Society},
	volume = {71},
	year = {2020},
	month = {2020},
	pages = {2323-2330},
	isbn = {2585-3724},
	author = {Benbia, S and BELKHIRI, Yamina and Yahia, Massinissa}
}
@article {63100,
	title = {Application of artificial intelligence to wind power generation: modelling, control and fault detection},
	journal = {International Journal of Intelligent Systems Technologies and ApplicationsInternational Journal of Intelligent Systems Technologies and Applications},
	volume = {19},
	year = {2020},
	month = {2020},
	pages = {280-305},
	isbn = {1740-8865},
	author = {Bouazza, Hadjira and Bendaas, Mohamed Lokmane and Allaoui, Tayeb and Denai, Mouloud}
}
@conference {62889,
	title = {Applications of Bayesian networks in Chemical and Process Industries: A review},
	booktitle = {Proceedings of the 29th European Safety and Reliability Conference, ESREL 2019},
	year = {2020},
	month = {2020},
	pages = {3122-3129},
	abstract = {Despite technological advancements, chemical and process industries are still prone to accidents due to their complexity and hazardous installations. These accidents lead to significant losses that represent economic losses and most importantly human losses. Risk management is one of the appropriate tools to guarantee the safe operations of these plants. Risk analysis is an important part of risk management, it consists of different methods such as Fault tree, Bow-tie, and Bayesian network. The latter has been widely applied for risk analysis purposes due to its flexible and dynamic structure. Bayesian networks approaches have shown a significant increase in their application as shown by in the publication in this field. This paper summarizes the result of a literature review performed on Bayesian network approaches adopted to conduct risk assessments, safety and risk analyses. Different application domains are analysed (i.e. accident modelling, maintenance area, fault diagnosis) in chemical and process industries from the year 2006 to 2018. Furthermore, the advantages of different types of Bayesian networks are presented.},
	url = {https://livrepository.liverpool.ac.uk/id/eprint/3054267},
	author = {Zerrouki, Hamza and Estrada-Lugo, Hector Diego and Hacene SMADI and Patelli, Edoardo}
}
@article {63070,
	title = {An approach to the acquisition of tacit knowledge based on an ontological model},
	journal = {Journal of King Saud University-computer and information sciencesJournal of King Saud University-Computer and Information Sciences},
	volume = {32},
	year = {2020},
	month = {2020},
	pages = {818-828},
	isbn = {1319-1578},
	author = {Chergui, Wahid and Samir Zidat and Marir, Farhi}
}
@article {63142,
	title = {Bark beetle and woodborer insects{\textquoteright} outbreak as a potent driver of Atlas cedar (Cedrus atlantica (Endl.) Carriere) forests dieback in Aures-East Algeria},
	journal = {Forest Science and TechnologyForest Science and Technology},
	volume = {16},
	year = {2020},
	month = {2020},
	pages = {75-85},
	isbn = {2158-0103},
	author = {Beghami, Riadh and Nabil Bertella and Laamari, Malik and Bensaci, Oussama Ali}
}
@article {62905,
	title = {Bathocuproine Buffer Layer Effect on the Performance of Inverted Perovskite Solar Cells},
	journal = {Journal of Technology Innovations in Renewable EnergyJournal of Technology Innovations in Renewable Energy},
	volume = {9},
	year = {2020},
	month = {2020},
	pages = {1-6},
	isbn = {1929-6002},
	author = {Touafek, Na{\"\i}ma and Dridi, Chahrazed and Mahamdi, Ramdane}
}
@article {63126,
	title = {Bi-objective scheduling with cooperating heuristics for embedded real-time systems},
	journal = {International Journal of Embedded SystemsInternational Journal of Embedded Systems},
	volume = {12},
	year = {2020},
	month = {2020},
	pages = {234-242},
	isbn = {1741-1068},
	author = {Bendib, Sonia Sabrina and Kalla, Hamoudi and Kalla, Salim}
}
@article {62973,
	title = {BLEVE Fireball Effects in a Gas Industry: A Numerical Modeling Applied to the Case of an Algeria Gas Industry},
	journal = {Fire Safety and Management Awareness, July 16thFire Safety and Management Awareness, July 16th},
	year = {2020},
	month = {2020},
	author = {Manescau, Brady and Chetehouna, Khaled and Sellami, Ilyas and Nait-Said, Rachid and Zidani, Fatiha}
}
@article {63120,
	title = {Broad-spectrum antimicrobial activity of wetland-derived Streptomyces sp. ActiF450},
	journal = {EXCLI journalEXCLI journal},
	volume = {19},
	year = {2020},
	month = {2020},
	pages = {360},
	author = {Mabrouka Benhadj and Metrouh, Roumaisa and Taha Menasria and Gacemi-Kirane, Djamila and Slim, Fatma Zohra and Ranque, Stephane}
}
@article {63110,
	title = {CARTEE: congestion avoidance with reliable transport and energy efficiency for multimedia applications in wireless sensor networks},
	journal = {Wireless NetworksWireless Networks},
	volume = {26},
	year = {2020},
	month = {2020},
	pages = {1803-1822},
	isbn = {1572-8196},
	author = {Benyahia, Abderrezak and Azeddine Bilami and SEDRATI, Maamar}
}
@article {62914,
	title = {Cartographie de la susceptibilite des incendies de foret a I{\textquoteright}aide de donnees de teledetection, des analyses SIG et AHP (etude de cas de Souhan, Algerie)},
	journal = {International Journal of Innovation and Applied StudiesInternational Journal of Innovation and Applied Studies},
	volume = {28},
	year = {2020},
	month = {2020},
	pages = {885-894},
	isbn = {2028-9324},
	author = {Taibi, Brahim Elkhalil and Hadda DRIDI and Bouhata, Rabah}
}
@article {63119,
	title = {Chemical characterisation, hypoglycaemic and renoprotective effects of aqueous leaf extract of Limoniastrum guyonianum on fructose-induced metabolic syndrome in rats},
	journal = {Archives of physiology and biochemistryArchives of physiology and biochemistry},
	year = {2020},
	month = {2020},
	pages = {1-10},
	isbn = {1381-3455},
	author = {Benkhaled, Abderrahim and R{\'e}ggami, Yassine and Boudjelal, Amel and Senator, Abderrahmane and Bouriche, Hamama and Demirta{\c s}, Ibrahim and Kheniche, Abdelhakim and Benyettou, Halima and Larabi, Nadia and Ruberto, Giuseppe}
}
@article {62899,
	title = {Chemical composition and insecticidal, repellent and antifungal activities of essential oil of Mentha rotundifolia (L.) from Algeria},
	journal = {Industrial crops and productsIndustrial crops and products},
	volume = {158},
	year = {2020},
	month = {2020},
	pages = {112988},
	isbn = {0926-6690},
	author = {Yakhlef, Ghania and Hambaba, Leila and Pinto, Diana CGA and Silva, Artur MS}
}
@article {62963,
	title = {Chemical composition, in vitro antiparasitic, antimicrobial and antioxidant activities of Frankenia thymifolia Desf.},
	journal = {Natural Product ResearchNatural Product Research},
	volume = {34},
	year = {2020},
	month = {2020},
	pages = {3363-3368},
	isbn = {1478-6419},
	author = {Mennai, Imad and HANFER, Mourad and Esseid, Chahrazed and Benayache, Samir and Ameddah, Souad and Menad, Ahmed and Benayache, Fadila}
}
@proceedings {63015,
	title = {A Clinical Reasoning Learning Groupware: An exploratory study of factors affecting the adoption behavior},
	journal = {2020 4th International Symposium on Informatics and its Applications (ISIA)},
	year = {2020},
	month = {2020},
	pages = {1-6},
	publisher = {IEEE},
	isbn = {1-72819-652-3},
	author = {Djalal HEDJAZI and Atef Chorfi and Sofiane Aouag}
}
@article {62894,
	title = {Coagulase negative staphylococci in Anti-Cancer Center, Batna, Algeria: antibiotic resistance pattern, biofilm formation, and detection of mecA and icaAD genes},
	journal = {African Journal of Clinical and Experimental MicrobiologyAfrican Journal of Clinical and Experimental Microbiology},
	volume = {21},
	year = {2020},
	month = {2020},
	pages = {21-29},
	isbn = {1595-689X},
	author = {Zatout, A and Djibaoui, R and Kassah-laouar, A and Benbrahim, C}
}
@article {63125,
	title = {Combined optical-electrical modeling of perovskite solar cell with an optimized design},
	journal = {Optical MaterialsOptical Materials},
	volume = {109},
	year = {2020},
	month = {2020},
	pages = {110259},
	isbn = {0925-3467},
	author = {Bendib, T and Bencherif, H and Abdi, MA and Meddour, F and Dehimi, L and Chahdi, M}
}
@article {62888,
	title = {COMMANDE DES MACHINES ELECTRIQUES: MOTEUR ASYNCHRONE},
	year = {2020},
	month = {2020},
	author = {ZIDANI, Pr F and NAIT-SAID, Pr M-S and Makouf, A}
}
@article {63063,
	title = {Comparative numerical study on pressure drop in helically coiled and longitudinally C-shaped pipes},
	journal = {SN Applied SciencesSN Applied Sciences},
	volume = {2},
	year = {2020},
	month = {2020},
	pages = {1-7},
	isbn = {2523-3971},
	author = {Demagh, Yassine and Bitam, Elwardi and Bordja, Lyes}
}
@article {62902,
	title = {Comparative study between propulsion control system failures of an electrical vehicle piloted by FOC and by DTC using dual-induction-motors structure},
	journal = {DiagnostykaDiagnostyka},
	volume = {21},
	year = {2020},
	month = {2020},
	isbn = {1641-6414},
	author = {Salah YAHIA CHERIF and Djamel BENOUDJIT and Mohamed Said NAIT-SAID and Nasreddine NAIT-SAID}
}
@article {63111,
	title = {A comparative study on scaling capabilities of Si and SiGe nanoscale double gate tunneling FETs},
	journal = {SiliconSilicon},
	volume = {12},
	year = {2020},
	month = {2020},
	pages = {945-953},
	isbn = {1876-9918},
	author = {Bentrcia, Toufik and Fay{\c c}al DJEFFAL and Ferhati, Hichem and Zohir Dibi}
}
@article {62930,
	title = {Comparison between a Passive and Active Suspension Vehicle using PID and Fuzzy Controllers with Two Entries Applied on Quarter Vehicle Model},
	journal = {systemsystem},
	volume = {8},
	year = {2020},
	month = {2020},
	pages = {9},
	author = {Salah, SOUDANI Mohamed and Elmoundher, AOUICHE and Abdelaziz, AOUICHE and Mounia, TALEB and Kheireddine, CHAFAA and Zaamouche, Fares}
}
@proceedings {62915,
	title = {Comparison between a Two-Level and Three-Level Inverter fed Induction Motor including Losses and Efficiency},
	journal = {2020 4th International Conference on Advanced Systems and Emergent Technologies (IC_ASET)},
	year = {2020},
	month = {2020},
	pages = {89-94},
	publisher = {IEEE},
	isbn = {1-72816-356-0},
	author = {Soualhi, Naima and Makouf, Abdesslem and Nasreddine NAIT-SAID and Hamada, Souad}
}
@inbook {63171,
	title = {Complete Synchronization of a Time-Fractional Reaction-Diffusion System with Lorenz Nonlinearities},
	booktitle = {Mathematical Methods in Engineering and Applied Sciences},
	year = {2020},
	month = {2020},
	pages = {19-48},
	publisher = {CRC Press},
	organization = {CRC Press},
	isbn = {0-429-34353-1},
	author = {Abbad, Abir and Abdelmalek, Salem and Bendoukha, Samir}
}
@article {63128,
	title = {Complex network to enhance characterization analysis in modelling product development process},
	journal = {African Journal of Science, Technology, Innovation and DevelopmentAfrican Journal of Science, Technology, Innovation and Development},
	volume = {12},
	year = {2020},
	month = {2020},
	pages = {797-811},
	isbn = {2042-1338},
	author = {Bencherif, Fateh and Leila Hayet Mouss}
}
@article {63045,
	title = {Composition and biological activity of the Algerian plant Rosa canina L. by HPLC-UV-MS},
	journal = {Arabian Journal of ChemistryArabian Journal of Chemistry},
	volume = {13},
	year = {2020},
	month = {2020},
	pages = {1105-1119},
	isbn = {1878-5352},
	author = {SamiraFetni and Nabil Bertella and Ammar Ouahab and Jose Miguel Martinez Zapater and Sonia De Pascual-Teresa Fernandez}
}
@article {63028,
	title = {A conceptual framework for risk matrix capitalization},
	journal = {Int J SystAssurEngManag. 2020,Int J SystAssurEngManag. 2020,},
	year = {2020},
	month = {2020},
	abstract = {Research on risk matrices show that there is considerable diversity in the practice of designing risk matrices. This has led to serious problems of standardization and communication. Indeed, these problems affect at the same time on the development of matrices and in their exploitation in term of risk assessment. To solve these problems, this paper proposes an experience feedback method that aims to capitalize the feedback invariants resulting from the analysis of existing risk matrices. This capitalization allows developing a theoretical framework of the robust risk matrices design. The application of the proposed method for examples of matrices confirms the interest of articulating these risk matrices designs through an argument based on experience feedback. In this sense, the merit of the proposed experience feedback method is that it promotes the sharing of knowledge between the actors involved in a risk assessment.},
	author = {HADEF, H. and M. Djebabra, M. Mouda and D. Belala,}
}
@article {63014,
	title = {A conceptual framework for risk matrix capitalization},
	journal = {International Journal of System Assurance Engineering and ManagementInternational Journal of System Assurance Engineering and Management},
	volume = {11},
	year = {2020},
	month = {2020},
	pages = {755-764},
	isbn = {0976-4348},
	author = {Hadef Hefaidh and Djebabra M{\'e}barek}
}
@article {62984,
	title = {Contribution {\`a} l{\textquoteright}Etude de l{\textquoteright}E-CND par Courants de Foucault de Mat{\'e}riaux Composites {\`a} Fibres de Carbone},
	year = {2020},
	month = {2020},
	author = {Lahrech, Ahmed Chaouki}
}
@article {63074,
	title = {Contribution {\`a} la capitalisation de la Qualit{\'e} de vie au Travail},
	journal = {الوقاية والأرغنومياالوقاية والأرغنوميا},
	volume = {7},
	year = {2020},
	month = {2020},
	pages = {9-18},
	isbn = {2676-2196},
	author = {Makhlouf Chati and M{\'e}barek Djebabra and Chettouh, Samia}
}
@article {63043,
	title = {Contribution to a Mixed Assessment of Patient Safety Culture},
	year = {2020},
	month = {2020},
	author = {Fourar, Youcef Oussama and Djebabra, MEBAREK and Wissal Benhassine and Leila Boubaker}
}
@article {63135,
	title = {Contribution to the ageing control of on shore oil and gas fields},
	journal = {Petroleum, 2020,Petroleum, 2020,},
	year = {2020},
	month = {2020},
	abstract = {The ageing of the Algerian oil and gas (O\&amp;G) installations has led to many incidents. Such installations are over 30 years old (life cycle) and still in operation. To deal with this O\&amp;G crucial problem, the Algerian authorities have launched a rehabilitation and modernization schedule of these installations. Within the framework of this program, many audit operations are initiated to elaborate a general diagnosis of the works to be performed while optimizing production. In other words, industrial ageing risks shall be controlled. In the process safety management (PSM) context, the aim of this paper is to study ageing problem of the Algerian industrial installations through proposed indicators. Their prioritization adjusted by (TOPSIS) Technique for Order-Preference by Similarity to Ideal Solution method which allows identification of ageing control solutions of Algerian onshore fields.},
	author = {BELMAZOUZI, Y. and DJBABRA, M. and HADEF, H.}
}
@article {62903,
	title = {Contribution to the ageing control of onshore oil and gas fields},
	journal = {PetroleumPetroleum},
	volume = {6},
	year = {2020},
	month = {2020},
	pages = {311-317},
	isbn = {2405-6561},
	author = {Belmazouzi Yacine and Djebabra M{\'e}barek and Hadef Hefaidh}
}
@article {63044,
	title = {Contribution to the assessment of patient safety culture in Algerian healthcare settings: The ASCO project},
	journal = {International Journal of Healthcare ManagementInternational Journal of Healthcare Management},
	year = {2020},
	month = {2020},
	pages = {1-10},
	isbn = {2047-9700},
	author = {Fourar, Youcef Oussama and Wissal Benhassine and Assia Boughaba and Djebabra, MEBAREK}
}
@article {63056,
	title = {Controlling power output of solar chimney power plant according to demand},
	journal = {International Journal of Ambient EnergyInternational Journal of Ambient Energy},
	volume = {41},
	year = {2020},
	month = {2020},
	pages = {1467-1481},
	isbn = {0143-0750},
	author = {Djaouida, Benlahcene and Aouachria, Zeroual and Benmachiche, Abdelmoum{\`e}ne Hakim and Ali, Sellami}
}
@article {63134,
	title = {Correction to: Using Hierarchical Timed Coloured Petri Nets in the formal study of TRBAC security policies},
	journal = {International Journal of Information SecurityInternational Journal of Information Security},
	volume = {19},
	year = {2020},
	month = {2020},
	pages = {241-241},
	isbn = {1615-5270},
	author = {Ben Attia, Hasiba and KAHLOUL, Laid and BENHARZALLAH, Saber and Samir BOUREKKACHE}
}
@article {63024,
	title = {Corrosion inhibition of Fe-19Cr stainless steel by glutamic acid in 1M HCl},
	journal = {Chemical Data CollectionsChemical Data Collections},
	volume = {28},
	year = {2020},
	month = {2020},
	pages = {100455},
	isbn = {2405-8300},
	author = {Hamadi, Latifa and Kareche, Abdelhak and Mansouri, Salah and BENBOUTA, Soumia}
}
@article {63095,
	title = {Coupled System of Nonlinear Hyperbolic Equations with Variable-Exponents: Global Existence and Stability},
	journal = {Mediterranean Journal of MathematicsMEDITERRANEAN JOURNAL OF MATHEMATICS},
	volume = {17},
	year = {2020},
	month = {2020},
	pages = {1-15},
	isbn = {1660-5454},
	author = {Bouhoufani, Oulia and Hamchi, Ilhem}
}
@inbook {63054,
	title = {A Cross-Layer Fault Tolerant Protocol with Recovery Mechanism for Clustered Sensor Networks},
	booktitle = {Sensor Technology: Concepts, Methodologies, Tools, and Applications},
	year = {2020},
	month = {2020},
	pages = {197-220},
	publisher = {IGI Global},
	organization = {IGI Global},
	author = {Djebaili, Yasmine and Azeddine Bilami}
}
@article {63124,
	title = {Cutting Tool Life And Its Effect On Surface Roughness When Turning With WC-6\% CO},
	journal = {International Journal of Modern Manufacturing TechnologiesInternational Journal of Modern Manufacturing Technologies},
	volume = {12},
	year = {2020},
	month = {2020},
	pages = {7-16},
	author = {Bendifallah, Mourad and Mourad Brioua and Belloufi, Abderrahim}
}
@article {63057,
	title = {Dairy dessert processing: Effect of sugar substitution by date syrup and powder on its quality characteristics},
	journal = {Journal of Food Processing and PreservationJournal of Food Processing and Preservation},
	volume = {44},
	year = {2020},
	month = {2020},
	pages = {e14414},
	isbn = {0145-8892},
	author = {Djaoud, Kahina and Boulekbache-Makhlouf, Lila and Yahia, Massinissa and Mansouri, Hafid and Mansouri, Nassima and Madani, Khodir and Romero, Alberto}
}
@article {63003,
	title = {De la d{\'e}finition princeps {\`a} la totor{\'e}sistance},
	journal = {Revue Aurassienne du laboratoireRevue Aurassienne du laboratoire},
	year = {2020},
	month = {2020},
	pages = {29},
	author = {Kassah-laouar, A}
}
@article {62919,
	title = {Decision making under uncertainty in the alarm systems response},
	journal = {International Journal of Quality \& Reliability Management, ahead-of-print. 2020.International Journal of Quality \& Reliability Management, ahead-of-print. 2020.},
	year = {2020},
	month = {2020},
	abstract = {Purpose The purpose of this paper is to develop an advanced decision-making support for the appropriate responding to critical alarms in the hazardous industrial facilities. Design/methodology/approach A fuzzy analytical hierarchy process is suggested by considering three alternatives and four criteria using triangular fuzzy numbers to handle the associated uncertainty. A logarithmic fuzzy preference programming (LFPP)-based nonlinear priority method is employed to analyze the suggested model. Findings A quantitative decision-making support is not only a necessity in responding to critical alarms but also easy to implement even in a relatively short reaction time. Confirmation may not be the appropriate option to deal with a critical alarm, even with the availability of the needed resources. Practical implications A situation related to a flammable gas alarm in a gas plant is treated using the developed model showing its practical efficiency and practicality. Originality/value The proposed model provides a rational, simple and holistic fuzzy multi criteria tool with a refined number of criteria and alternatives using an LFPP method to handle process alarms.},
	author = {SI-MOHAMMED, A. and SMAIL, R. and MCHEBILA}
}
@article {63064,
	title = {Delay or avoidance of medical care because of COVID-19{\textendash}related concerns{\textemdash}United States, June 2020},
	journal = {Morbidity and mortality weekly reportMorbidity and mortality weekly report},
	volume = {69},
	year = {2020},
	month = {2020},
	pages = {1250},
	author = {Czeisler, Mark {\'E} and Marynak, Kristy and Clarke, Kristie EN and Salah, Zainab and Shakya, Iju and Thierry, JoAnn M and Ali, Nida and McMillan, Hannah and Wiley, Joshua F and Weaver, Matthew D}
}
@article {63098,
	title = {Design and experimental validation of an intelligent controller for DC{\textendash}DC buck converters},
	journal = {Journal of the Franklin InstituteJournal of the Franklin Institute},
	volume = {357},
	year = {2020},
	month = {2020},
	pages = {10353-10366},
	isbn = {0016-0032},
	author = {Bouchama, Ziyad and Khatir, Abdelfatah and Benaggoune, Sa{\"\i}d and Harmas, Mohamed Naguib}
}
@article {62939,
	title = {A design approach towards sustainable buildings in Algeria},
	journal = {", Smart and Sustainable Built Environment, Vol. ahead-of-print. 2020,", Smart and Sustainable Built Environment, Vol. ahead-of-print. 2020,},
	year = {2020},
	month = {2020},
	abstract = {Purpose The purpose of this paper is to achieve the national strategic agenda{\textquoteright}s criteria that aim for accomplishing sustainable buildings by estimating the effects of energy efficiency measures in order to reduce energy consumption and CO2 emission. Design/methodology/approach A design approach has been developed based on simulation software and a modeled building. Therefore, a typical office building is considered for testing five efficiency measures in three climatic conditions in Algeria. This approach is conducted in two phases: first, the analysis of each measure{\textquoteright}s effect is independently carried out in terms of cooling energy and heating energy intensities. Then, a combination of optimal measures for each climate zone is measured in terms of three sustainable indicators: final energy consumption, energy cost saving and CO2 emission. Findings The results reveal that a combination of optimal measures has a substantial impact on building energy saving and CO2 emission. This saving can rise to 41 and 31 percent in a hot and cold climate, respectively. Furthermore, it is concluded that obtaining higher building performance, different design alternatives should be adapted to the climate proprieties and the local construction materials must be applied. Originality/value This study is considered as an opportunity for achieving the national strategy, as it may contribute in improving office building performance and demonstrating a suitable tool to assist stakeholders in the decision making of most important parameters in the design stage for new or retrofit buildings.},
	author = {RAHMOUNI, S. and SMAIL, R.}
}
@article {62959,
	title = {Determination and Classification of Explosive Atmosphere Zones While Considering the Height of Discharges},
	journal = {Journal of Failure Analysis and PreventionJournal of Failure Analysis and Prevention},
	volume = {20},
	year = {2020},
	month = {2020},
	pages = {503-512},
	isbn = {1864-1245},
	author = {Zakarya MIHOUB and Ahmed OUSLATI and Hacene SMADI and Bilal MAY}
}
@article {63121,
	title = {Development of Multi-Coils Circular Eddy Current Sensor for Characterization of Fibers Orientation and Defect Detection in Multidirectional CFRP Material},
	journal = {Research in Nondestructive EvaluationResearch in Nondestructive Evaluation},
	volume = {31},
	year = {2020},
	month = {2020},
	pages = {133-146},
	isbn = {0934-9847},
	author = {Benhadda, Nabil and Hachi, Dahmane and Helifa, Bachir and Lefkaier, Ibn Khaldoun and Abdelhadi, Bachir}
}
@article {62986,
	title = {Different artificial intelligence strategies to control an inverter of an active power filter for power quality improvement},
	journal = {International Journal of Power ElectronicsInternational Journal of Power Electronics},
	volume = {12},
	year = {2020},
	month = {2020},
	pages = {399-427},
	isbn = {1756-638X},
	author = {Lahmadi, Ouarda and Benfarhi, Louiza}
}
@article {62891,
	title = {Digital learning with Covid-19 in Algeria},
	journal = {International Journal of 3D printing technologies and digital industryInternational Journal of 3D printing technologies and digital industry},
	volume = {4},
	year = {2020},
	month = {2020},
	pages = {161-170},
	isbn = {2602-3350},
	author = {Hanane Zermane and Samia Aitouche}
}
@article {62949,
	title = {Diketopiperazines from Batnamyces globulariicola, gen. \& sp. nov.(Chaetomiaceae), a fungus associated with roots of the medicinal plant Globularia alypum in Algeria},
	journal = {Mycological ProgressMycological Progress},
	volume = {19},
	year = {2020},
	month = {2020},
	pages = {589-603},
	isbn = {1861-8952},
	author = {Sara R Noumeur and R{\'e}my B Teponno and Soleiman E Helaly and Wang, Xue-Wei and Daoud Harzallah and Houbraken, Jos and Crous, Pedro W and Marc Stadler}
}
@article {63094,
	title = {Direct torque control of dual star induction motor using a fuzzy-PSO hybrid approach},
	journal = {Applied Computing and InformaticsApplied Computing and Informatics},
	year = {2020},
	month = {2020},
	isbn = {2210-8327},
	author = {Ghoulemallah Boukhalfa and Sebti Belkacem and Abdesselem Chikhi and Said Benaggoune}
}
@proceedings {62998,
	title = {Discrete Time Sensorless PMSM Control Using an Extended Kalman Filter for Electric Vehicle Traction Systems Fed by Multi Level Inverter},
	journal = {International Conference in Artificial Intelligence in Renewable Energetic Systems},
	year = {2020},
	month = {2020},
	pages = {281-293},
	publisher = {Springer},
	author = {Khemis R, A and Boutabba, T and Drid, S}
}
@proceedings {63130,
	title = {A Distributed Information Retrieval Approach for Copyright Protection},
	journal = {Proceedings of the 3rd International Conference on Networking, Information Systems \& Security},
	year = {2020},
	month = {2020},
	pages = {1-6},
	author = {Benbelgacem, Sonia and Larbi GUEZOULI and Seghir, Rachid}
}
@article {63131,
	title = {Diversity and enzymatic potential of thermophilic bacteria associated with terrestrial hot springs in Algeria},
	journal = {Brazilian Journal of MicrobiologyBrazilian Journal of Microbiology},
	volume = {51},
	year = {2020},
	month = {2020},
	pages = {1987-2007},
	isbn = {1678-4405},
	author = {Leyla Benammar and {\.I}nan Bekta{\c s}, KADR{\.I}YE and Menasria, T and Beld{\"u}z, AO and G{\"u}ler, HI and Bedaida, IK and Gonzalez, JM and Ayachi, A}
}
@article {62923,
	title = {Dynamic modelling of the behaviour of the Ouarkiss earthen dam under seismic loads},
	journal = {GeoScience EngineeringGeoScience Engineering},
	volume = {66},
	year = {2020},
	month = {2020},
	pages = {40-52},
	isbn = {1802-5420},
	author = {Seghir, Tarek and Fourar, Ali and Zeroual, Abdelatif and Massouh, Fawaz}
}
@article {62997,
	title = {On Dynamics of a Fractional-Order Discrete System with Only One Nonlinear Term and without Fixed Points},
	journal = {ElectronicsElectronics},
	volume = {9},
	year = {2020},
	month = {2020},
	pages = {2179},
	author = {KHENNAOUI, AMINA-AICHA and Ouannas, Adel and MOMANI, SHAHER and Batiha, Iqbal M and Zohir Dibi and Grassi, Giuseppe}
}
@article {63038,
	title = {Early detection of glycemia disorders using one-hour post load plasma glucose after an oral glucose tolerance test},
	journal = {Batna Journal of Medical Sciences (BJMS)Batna Journal of Medical Sciences (BJMS)},
	volume = {7},
	year = {2020},
	month = {11 2020},
	pages = {148-150},
	abstract = {L{\textquoteright}hyperglyc{\'e}mie provoqu{\'e}e par voie orale (HGPO) est indiqu{\'e}e et effectu{\'e}e chez les patients pour lesquels on suspecte des anomalies du m{\'e}tabolisme du glucose. Les crit{\`e}res de diagnostic du diab{\`e}te sont assez codifi{\'e}s. Cependant l{\textquoteright}{\'e}tat pr{\'e}diab{\'e}tique est associ{\'e} {\`a} une perturbation moins prononc{\'e}e de la glyc{\'e}mie {\`a} jeun et/ou de celle apr{\`e}s 2 heures. Pour r{\'e}aliser une HGPO, il faut mesurer la glyc{\'e}mie avant l{\textquoteright}administration de 75 g glucose et deux heures apr{\`e}s. Des pr{\'e}l{\`e}vements {\`a} 30, 60 et 90 minutes sont souvent r{\'e}alis{\'e}s en plus des deux pr{\'e}l{\`e}vements des temps obligatoires. Depuis quelques ann{\'e}es, la mesure de la glyc{\'e}mie 60 minutes apr{\`e}s l{\textquoteright}administration de 75 g de glucose, est devenue une pratique de plus en plus courante. Cette pratique semble {\^e}tre plus fiable en post HGPO chez des sujets dont le profil glyc{\'e}mique normal et qui ont une glyc{\'e}mie {\`a} 60 minutes sup{\'e}rieure ou {\'e}gale {\`a} la valeur de 1,55 g/L.},
	author = {Guedjati, Mohamed-Ridha}
}
@article {63116,
	title = {EBEESU: ElectriBio-inspired energy-efficient self-organization model for unmanned aerial ad-hoc network},
	journal = {Ad Hoc NetworksAd Hoc Networks},
	volume = {107},
	year = {2020},
	month = {2020},
	pages = {102236},
	isbn = {1570-8705},
	author = {Bensalem, Amina and Djallel Eddine Boubiche}
}
@article {63010,
	title = {ECG signal denoising by fractional wavelet transform thresholding},
	journal = {Research on Biomedical EngineeringResearch on Biomedical Engineering},
	volume = {36},
	year = {2020},
	month = {2020},
	pages = {349-360},
	isbn = {2446-4740},
	author = {Houamed, Ibtissem and Saidi, Lamir and Srairi, Fawzi}
}
@article {63170,
	title = {Eddy current characterization of 3D crack by analyzing probe signal and using a fast algorithm search},
	journal = {Russian Journal of Nondestructive TestingRussian Journal of Nondestructive Testing},
	volume = {56},
	year = {2020},
	month = {2020},
	pages = {426-434},
	isbn = {1608-3385},
	author = {Abbassi, Abderrahmane and Bouchala, Tarik and Abdou, Abdelhak and Abdelhadi, Bachir}
}
@article {62974,
	title = {Effect of different altitude on reproductive performances and mineral assessment in Ouled Djellal ewes during the mating period},
	journal = {Tropical Animal Health and ProductionTropical Animal Health and Production},
	volume = {52},
	year = {2020},
	month = {2020},
	pages = {3275-3283},
	isbn = {1573-7438},
	author = {Makhlouf, Asma and Titaouine, Mohammed and Mohamdi, Hanane and Yakoub, Fadjria}
}
@article {63103,
	title = {Effect of Long-Term Soil Deformations on RC Structures Including Soil-Structure Interaction},
	journal = {Civil Engineering JournalCivil Engineering Journal},
	volume = {6},
	year = {2020},
	month = {2020},
	pages = {2290-2311},
	isbn = {2476-3055},
	author = {Bezih, Kamel and Chateauneuf, Alaa and Demagh, Rafik}
}
@article {62971,
	title = {Effect of nitrogen fertilizer on growth, flowering, fruiting and nodulation of three varieties of common bean in the arid region of a{\"\i}n naga (Biskra, Algeria)},
	year = {2020},
	month = {2020},
	author = {Mansouri, LM and Kheloufi, A and Belatreche, R and Heleili, N and Boukhatem, ZF}
}
@article {63096,
	title = {Effect of renewable energy sources integration on the optimal coordination of directional over-current relays in distribution system},
	journal = {International Journal of AppliedInternational Journal of Applied},
	volume = {9},
	year = {2020},
	month = {2020},
	pages = {250-255},
	author = {Bougouffa, Lazhar and CHAGHI, ABDELAZIZ}
}
@article {63066,
	title = {Effect of using treated wastewater on the bacteriological quality of raw cows milk: A case of a farm in Northeastern Algeria},
	journal = {African Journal of Microbiology ResearchAfrican Journal of Microbiology Research},
	volume = {14},
	year = {2020},
	month = {2020},
	pages = {436-446},
	isbn = {1996-0808},
	author = {Chorfi, Keltoum and Bendjemana, Katia and Ammar Ayachi and Mahdi, Fatma and Bouzidi, Nour El Aimane}
}
@article {63037,
	title = {Effects of 1 hour postload plasma glucose greater than 1.55 g/L combinations with normal glycemia profiles after an OGTT in obese women},
	journal = {Batna Journal of Medical Sciences (BJMS)Batna Journal of Medical Sciences (BJMS)},
	volume = {7},
	year = {2020},
	month = {11 2020},
	pages = {87-91},
	abstract = {Introduction. Des {\'e}tudes ont fait {\'e}merger l{\textquoteright}existence de risque de pr{\'e}diab{\`e}te chez les patients qui ont une combinaison, profil glyc{\'e}mique normal et une glyc{\'e}mie {\`a} 1 heure sup{\'e}rieure {\`a} 1,55 g/L. Nous avons {\'e}tudi{\'e} les effets des combinaisons glyc{\'e}mie 1 heure (Gly 1h) apr{\`e}s une hyperglyc{\'e}mie provoqu{\'e}e par voie orale HGPO avec un profil glyc{\'e}mique normal. M{\'e}thode. Une HGPO standardis{\'e}e a {\'e}t{\'e} r{\'e}alis{\'e}e chez 100 femmes ob{\`e}ses. 46 avaient un profil glyc{\'e}mique normal. Une GAJ \&lt;1,00 g/L et une glyc{\'e}mie {\`a} 2 heures, Gly 2h \&lt;1,40 g/L. Elles {\'e}taient class{\'e}es en deux groupes. Le groupe 1 (G1) ayant une GAJ \&lt;1,00 g/L, subdivis{\'e} en (G1a) ayant une Gly 1h \&lt;1,55 g/L et G1b ayant une Gly 1h >= {\`a} 1,55 g/L. Le groupe 2 (G2) avec une Gly 2h \&lt;1,40 g/L, subdivis{\'e} en (G2a) ayant une Gly 1h \&lt;1,55 g/L et (G2b) ayant une Gly 1h >=1,55 g/L. Les tests de sensibilit{\'e} {\textendash} sp{\'e}cificit{\'e} et l{\textquoteright}Odds ratio ont {\'e}t{\'e} calcul{\'e}s {\`a} la recherche d{\textquoteright}{\'e}ventuelles corr{\'e}lations. R{\'e}sultats. Une corr{\'e}lation tr{\`e}s significative existait entre la Gly 1h >=1,55 g/L chez les sous-groupes G1b (n=11, p=0,0001) et G2b (n=11, p=0,0007) et la valeur de 1,55 g/L. Cette valeur est hautement sp{\'e}cifique (sp{\'e}cificit{\'e} 0,79) et moins sensible (sensibilit{\'e} 0,64-0,54). L{\textquoteright}Odds ratio {\'e}tait de [G1b=5,85 et G2b=3,41]. Conclusion. La Gly 1h {\`a} la valeur seuil de 1,55 g/L peut mieux mettre en {\'e}vidence des profils glyc{\'e}miques {\`a} risque cardiom{\'e}tabolique.},
	author = {Mohamed Ridha Guedjati and Maamar, Boukebbal and Hocine Gacem and Amel, Ahmane and Adeila, Taibi and Hebboul Ghania and Gasmi Dhikra and Lachekhab Khaoula and Asma, Djebabra and Samira, Benadjrouda}
}
@article {62966,
	title = {An efficient hybrid solar and electromagnetic harvesting system for autonomous operation of small sensors},
	journal = {OptikOptik},
	volume = {208},
	year = {2020},
	month = {2020},
	pages = {164022},
	isbn = {0030-4026},
	author = {Meddour, Faycal and Bencherif, Hichem and Boukarkar, Abdelheq and Abdi, Mohamed Amir and Amir, Mounir}
}
@article {62946,
	title = {Electrocardiogram Signal Denoising by Hilbert Transform and Synchronous Detection},
	journal = {International Journal BioautomationInternational Journal Bioautomation},
	volume = {24},
	year = {2020},
	month = {2020},
	pages = {323},
	isbn = {1314-1902},
	author = {Ouali, Mohammed Assam and Tinouna, Asma and Ghanai, Mouna and Chafaa, Kheireddine}
}
@article {63161,
	title = {EMERGENCE OF PLASMID MEDIATED COLISTIN RESISTANCE GENE MCR-1 IN CARBAPENEM-RESISTANT PSEUDOMONAS AERUGINOSA CLINICAL ISOLATES FROM ALGERIA: A NEW SUCCESSFUL RESISTANCE COMBINATION TOWARD A THERAPEUTIC IMPASSE?},
	journal = {International JournalInternational Journal},
	volume = {76},
	year = {2020},
	month = {2020},
	author = {Abir, Addouda and Ammar, Ayachi and Hafida, Hassaine and Sana, Dhaouadi and Leila, Soufi and Mouna, Mahjoubi and Messaoud, Benmehidi and Nadia, Grainat and Boubaker, Elandalousi Ramzi}
}
@proceedings {63080,
	title = {Energy Saving Analysis of Municipal Pool Fed from Hybrid Renewable Energy in Batna Algeria},
	journal = {International Conference in Artificial Intelligence in Renewable Energetic Systems},
	year = {2020},
	month = {2020},
	pages = {43-54},
	publisher = {Springer},
	author = {Boutabba, T and Bechka, ML and Menzri, F and Drid, S}
}
@article {62916,
	title = {Enhancement of the competitiveness and the financial capability of a manufacturing process through a new value stream mapping approach},
	journal = {International Journal of Productivity and Quality ManagementInternational Journal of Productivity and Quality Management},
	volume = {29},
	year = {2020},
	month = {2020},
	pages = {439-453},
	isbn = {1746-6474},
	author = {Soltani, Mohyiddine and Aouag, Hichem and Mouss, Mohammed Djamel}
}
@article {63152,
	title = {Enhancement of value stream mapping application process through using fuzzy DEMATEL and fuzzy QFD approaches: a case study considering economic and environmental perspectives},
	journal = {Journal of Modelling in ManagementJournal of Modelling in Management},
	year = {2020},
	month = {2020},
	isbn = {1746-5664},
	author = {Aouag, Hichem and Soltani, Mohyiddine and Mouss, Mohamed Djamel}
}
@article {62990,
	title = {Enhancing thermal performance of a parabolic trough collector with inserting longitudinal fins in the down half of the receiver tube},
	journal = {Journal of Thermal ScienceJournal of Thermal Science},
	volume = {29},
	year = {2020},
	month = {2020},
	pages = {1309-1321},
	isbn = {1993-033X},
	author = {Laaraba, Adel and Ghazali Mebarki}
}
@article {62895,
	title = {Epidemiological investigation of subclinical bovine mastitis in Algeria and molecular characterization of biofilm-forming Staphylococcus aureus},
	journal = {Tropical Animal Health and ProductionTropical Animal Health and Production},
	volume = {52},
	year = {2020},
	month = {2020},
	pages = {283-292},
	isbn = {1573-7438},
	author = {Zaatout, Nawel and Ammar Ayachi and Kecha, Mouloud}
}
@article {63087,
	title = {Estimation of beta-pareto distribution based on several optimization methods},
	journal = {MathematicsMathematics},
	volume = {8},
	year = {2020},
	month = {2020},
	pages = {1055},
	author = {Boumaraf, Badreddine and Seddik-Ameur, Nacira and Barbu, Vlad Stefan}
}
@article {63036,
	title = {Estimation of the peak flows in the catchment area of Batna (Algeria)},
	journal = {Journal of Groundwater Science and EngineeringJournal of Groundwater Science and Engineering},
	volume = {8},
	year = {2020},
	month = {2020},
	pages = {79-86},
	isbn = {2305-7068},
	author = {Guellouh, Sami and ABDELWAHHAB FILALI and Kalla, Med ISSAM}
}
@article {63143,
	title = {Ethanolic Extract of Algerian Propolis Induced Cell Damage in Staphylococcus Aureus: A Promising Alternative as a Natural Bio-Preservative in Food Products},
	journal = {Acta AlimentariaActa Alimentaria},
	volume = {49},
	year = {2020},
	month = {2020},
	pages = {505-514},
	isbn = {0139-3006},
	author = {Bedaida, IK and Masry, SHD and Mamache, B and Shehata, MG and Benammar, L and Ayachi, A}
}
@article {63022,
	title = {Etoposide-based therapy for severe forms of COVID-19},
	journal = {Medical HypothesesMedical Hypotheses},
	volume = {142},
	year = {2020},
	month = {05 2020},
	pages = {109826},
	abstract = {The new coronavirus infection COVID-19 has quickly become a global health emergency. Mortality is principally due to severe Acute Respiratory Distress Syndrome (ARDS) which relays only on supportive treatment. Numerous pathological, clinical and laboratory findings rise the similarity between moderate to severe COVID-19 and haemophagocytic lymphohistiocytosis (HLH). Etoposide-based protocol including dexametasone is the standard of care for secondary HLH. The protocol has been successfully used in HLHs that are secondary to EBV and H1N1 infections by inducing complete response and prolonged survival. These observations prompt to consider this cytotoxic therapy in HLH associated to moderately severe to severe forms of COVID-19.},
	author = {Hamizi, Kamel and Aouidane, Souhila and Belaaloui, Ghania}
}
@article {62967,
	title = {Etude des activit{\'e}s biologiques des extraits m{\'e}thanoliques des fruits et des {\'e}corces de racines de capparis spinosa l.},
	year = {2020},
	month = {2020},
	author = {Meddour, Asma}
}
@article {62945,
	title = {ETUDE ET MODELISATION D{\textquoteright}UN CAPTEUR MOLECULAIRE},
	year = {2020},
	month = {2020},
	author = {OUARGHI, Meriem}
}
@article {62953,
	title = {Evaluation of Cytotoxic Effect, Anti-Cholinesterase, Hemolytic and Antibacterial activities of the Species Scabiosa stellata L.},
	journal = {Current Bioactive CompoundsCurrent Bioactive Compounds},
	volume = {16},
	year = {2020},
	month = {2020},
	pages = {72-79},
	isbn = {1573-4072},
	author = {Mouffouk, Chaima and Hambaba, Leila and Haba, Hamada and Mouffouk, Soumia and Chawki Bensouici}
}
@article {62929,
	title = {Evaluation of diffuse fraction and diffusion coefficient using statistical analysis},
	journal = {Applied Water ScienceApplied Water Science},
	volume = {10},
	year = {2020},
	month = {2020},
	pages = {1-12},
	isbn = {2190-5495},
	author = {Salhi, Hicham and Belkhiri, Lazhar and Tiri, Ammar}
}
@article {63086,
	title = {Evaluation of the High Performance Indirect Field Oriented Controlled Dual Induction Motor Drive Fed by a Single Inverter using Type-2 Fuzzy Logic Control},
	journal = {Engineering, Technology \& Applied Science ResearchEngineering, Technology \& Applied Science Research},
	volume = {10},
	year = {2020},
	month = {2020},
	pages = {6301-6308},
	isbn = {1792-8036},
	author = {Bounab, Alaeddine and Chaiba, Azeddine and Sebti Belkacem}
}
@article {63097,
	title = {On the existence, uniqueness, and new analytic approximation of the modifieded error function in two-phase Stefan problems},
	journal = {Authorea PreprintsAuthorea Preprints},
	year = {2020},
	month = {2020},
	author = {BOUGOFFA, LAZHAR and Rach, Randolph and MENNOUNI, ABDELAZIZ}
}
@article {63053,
	title = {Experimental and Modeling Studies for the Adsorption of Phenol from Water Using Natural and Modified Algerian Clay},
	journal = {Korean Chemical Engineering ResearchKorean Chemical Engineering Research},
	volume = {58},
	year = {2020},
	month = {2020},
	pages = {624-634},
	isbn = {0304-128X},
	author = {Djemai, Ismahane and Messaid, Belkacem}
}
@article {63034,
	title = {Experimental and numerical study of a solar collector using phase change material as heat storage},
	journal = {Journal of Energy StorageJournal of Energy Storage},
	volume = {27},
	year = {2020},
	month = {2020},
	pages = {101133},
	isbn = {2352-152X},
	author = {Guerraiche, Djemaa and Bougriou, Cherif and Guerraiche, Khelifa and Valenzuela, Loreto and Driss, Zied}
}
@article {63079,
	title = {Experimental control of photovoltaic system using neuro{\textendash}Kalman filter maximum power point tracking (MPPT) technique},
	journal = {International Journal of Emerging Electric Power SystemsInternational Journal of Emerging Electric Power Systems},
	volume = {21},
	year = {2020},
	month = {2020},
	isbn = {1553-779X},
	author = {BOUTABBA, Tarek and Said Drid and CHRIFI-ALAOUI, Larbi}
}
@article {62931,
	title = {Experimental evaluation of three local exhaust ventilation systems designed to reduce Ultrafine dust emission during a polishing process},
	journal = {Aerosol Science and EngineeringAerosol Science and Engineering},
	volume = {4},
	year = {2020},
	month = {2020},
	pages = {9-17},
	isbn = {2510-3768},
	author = {Saidi, Mohamed Nejib and Djebara, Abdelhakim and Songmene, Victor and Bahloul, Ali}
}
@article {62987,
	title = {Experimental Study and Mathematical Modelling of Loquat Drying: Effect of the Drying Method on Quality},
	journal = {International Review of Mechanical Engineering (IREME)International Review of Mechanical Engineering (IREME)},
	year = {2020},
	month = {2020},
	pages = {208},
	author = {Lahbari, M and Fahloul, D}
}
@proceedings {62893,
	title = {Face Recognition Based on Harris Detector and Convolutional Neural Networks},
	journal = {International Symposium on Modelling and Implementation of Complex Systems},
	year = {2020},
	month = {2020},
	pages = {163-171},
	publisher = {Springer},
	author = {Zeghina, Assaad Oussama and Zoubia, Oussama and Behloul, Ali}
}
@article {63042,
	title = {Failure simulation of Babar dam{\textendash}Algeria and its impact on the valley downstream section},
	journal = {Journal of Water and Land DevelopmentJournal of Water and Land Development},
	year = {2020},
	month = {2020},
	isbn = {1429-7426},
	author = {Gaagai, Aissam and Boudoukha, Abderrahmane and Benaabidate, Lahcen}
}
@article {63072,
	title = {Fault diagnosis of blowout preventer system using artificial neural networks: a comparative study},
	journal = {International Journal of Quality \& Reliability ManagementInternational Journal of Quality \& Reliability Management},
	year = {2020},
	month = {2020},
	isbn = {0265-671X},
	author = {Samia Chebira and Noureddine Bourmada and Abdelali Boughaba and Djebabra, MEBAREK}
}
@article {63099,
	title = {Fictitious electric conductivity modelling of eddy current evaluation of magnetic materials},
	journal = {Nondestructive Testing and EvaluationNondestructive Testing and Evaluation},
	volume = {35},
	year = {2020},
	month = {2020},
	pages = {19-28},
	isbn = {1058-9759},
	author = {Bouchala, Tarik and Aouf, Anouaressadate and Abdelhadi, Bachir and Benoudjit, Azeddine}
}
@article {63006,
	title = {The first association of Hb Knossos:(HBB: c. 82G> T) with (HBB: c. 118C˃ T) mutation causes thalassemia homozygous in Algerian children},
	journal = {GSC Biological and Pharmaceutical SciencesGSC Biological and Pharmaceutical Sciences},
	volume = {12},
	year = {2020},
	month = {2020},
	pages = {162-167},
	isbn = {2581-3250},
	author = {Kamilia, Belhadi and Hayat, Djaara}
}
@article {63123,
	title = {First detection of an OXA-48-producing Enterobacter cloacae isolate from currency coins in Algeria},
	journal = {Journal of Global Antimicrobial ResistanceJournal of Global Antimicrobial Resistance},
	volume = {23},
	year = {2020},
	month = {2020},
	pages = {162-166},
	isbn = {2213-7165},
	author = {Esma Bendjama and Lotfi Loucif and Chelaghma, Widad and Attal, Chahrazed and Bellakh, Fatma Zohra and Benaldjia, Randa and Kahlat, Im{\`e}ne and Meddour, Amna and Jean-Marc Rolain}
}
@article {63162,
	title = {First detection of plasmid-mediated 16S rRNA methylases and aminoglycoside modifying enzymes in an extended spectrum β-lactamases Pseudomonas aeruginosa clinical isolates from Algeria: A new bacterial success toward pan-drug resistance?},
	journal = {PONTE International Journal of Science and ResearchPONTE International Journal of Science and Research},
	volume = {76},
	year = {2020},
	month = {2020},
	isbn = {0032-423X},
	author = {Abir, Addouda and Ammar, Ayachi and Hafida, Hassaine and Sana, Dhaouadi and Leila, Soufi and Messaoud, Benmehidi and Boubaker, Elandalousi Ramzi}
}
@article {63017,
	title = {Flood Hazard Spatialization Applied to The City of Batna: A Methodological Approach},
	journal = {Engineering, Technology \& Applied Science ResearchEngineering, Technology \& Applied Science Research},
	volume = {10},
	year = {2020},
	month = {2020},
	pages = {5748-5758},
	isbn = {1792-8036},
	author = {Harkat, N and Chaouche, S and Bencherif, M}
}
@article {62927,
	title = {Flood Risk, Typology, Severity and Management},
	journal = {Analele Universit{\u a}{\c t}ii din Oradea, Seria GeografieAnalele Universit{\u a}{\c t}ii din Oradea, Seria Geografie},
	volume = {30},
	year = {2020},
	month = {2020},
	pages = {176-181},
	author = {Sami, G and Abdelwahhab, F and Yahyaoui, H and Mouhamed Issam, K}
}
@article {63145,
	title = {Forest and woodland replacement patterns following drought-related mortality},
	journal = {Proceedings of the National Academy of SciencesProceedings of the National Academy of Sciences},
	volume = {117},
	year = {2020},
	month = {2020},
	pages = {29720-29729},
	isbn = {0027-8424},
	author = {Batllori, Enric and Lloret, Francisco and Aakala, Tuomas and Anderegg, William RL and Aynekulu, Ermias and Bendixsen, Devin P and Bentouati, Abdallah and Bigler, Christof and Burk, C John and Camarero, J Julio}
}
@article {63051,
	title = {FOREST FIRE SUSCEPTIBILITY MODELLING USING REMOTE SENSING DATA, GIS AND AHP ANALYSIS (CASE STUDY: SOUHAN, ALGERIA)},
	journal = {PONTE International Journal of Science and ResearchPONTE International Journal of Science and Research},
	volume = {76},
	year = {2020},
	month = {2020},
	isbn = {0032-423X},
	author = {Elkhalil, Taibi Brahim and Hadda, Dridi and Bouhata Rabah}
}
@article {63011,
	title = {Fractional Wavelet-based QRS Detector},
	journal = {International Journal on Electrical Engineering and InformaticsInternational Journal on Electrical Engineering and Informatics},
	volume = {12},
	year = {2020},
	month = {2020},
	pages = {82-93},
	isbn = {2085-6830},
	author = {Houamed, Ibtissem and Saidi, Lamir}
}
@article {62937,
	title = {Free Radical Scavenging Activity, Reducing Power and Anti-Hemolytic Capacity of Algerian Drimia maritima Baker Flower Extracts},
	journal = {Journal of Drug Delivery and TherapeuticsJournal of Drug Delivery and Therapeutics},
	volume = {10},
	year = {2020},
	month = {2020},
	pages = {70-78},
	isbn = {2250-1177},
	author = {Rezzagui, Abir and Senator, Abderrahmane and Benbrinis, Soumia and Bouriche, Hamama}
}
@proceedings {63156,
	title = {FUZZY CONTROL AND OPTIMIZATION OF A PHOTOVOLTAIC SYSTEM FOR SMART BUILDING WITH LOW ENERGY CONSUMPTION},
	journal = {International Conference on Control},
	year = {2020},
	month = {2020},
	author = {Alibi, Abdelaali and CHRIFI-ALAOUI, Larbi and LABDAI, Sami and Said Drid}
}
@article {62979,
	title = {Generalized derivation, SVEP, finite ascent, range closure},
	journal = {FilomatFILOMAT},
	volume = {34},
	year = {2020},
	month = {2020},
	pages = {3473-3482},
	author = {Farida Lombarkia and Megri, Sabra}
}
@article {62969,
	title = {Generalized markovian consideration of common cause failures in the performance assessment of safety instrumented systems},
	journal = {Process Safety and Environmental ProtectionProcess Safety and Environmental Protection},
	volume = {2018},
	year = {2020},
	month = {2020},
	pages = {28-36.},
	abstract = {Aiming to provide a generalized method for assessing the performance of safety instrumented systems with a flexible and accurate consideration of the common cause failures{\textquoteright} contribution. This paper is devoted to the development of a direct way to generate the transition rate matrix associated with the continuous-time Markov model of any typical KooN architecture using any parametric model. Such a choice is considered after a detailed comparison of the ability of several dependability methods (e.g., fault trees, reliability block diagrams, Markov models, Bayesian networks, etc) to provide simple representations and genuine results in this context. To validate the developed method, the unavailability and the unconditional failure intensity of a wide range of configurations are quantified using the Binomial Failure Rate model and compared to those of the complete fault tree implementation.},
	author = {MCHEBILA}
}
@article {63073,
	title = {Generalized markovian consideration of common cause failures in the performance assessment of safety instrumented systems},
	journal = {Process Safety and Environmental ProtectionProcess Safety and Environmental Protection},
	volume = {141},
	year = {2020},
	month = {2020},
	pages = {28-36},
	isbn = {0957-5820},
	author = {Chebila, Mourad}
}
@article {62941,
	title = {The genomic epidemiology of SARS-CoV-2 in Palestine},
	journal = {bioRxivbioRxiv},
	year = {2020},
	month = {2020},
	author = {Qutob, Nouar and Salah, Zaidoun and Richard, Damien and Darwish, Hisham and Sallam, Husam and Shtayeh, Issa and Najjar, Osama and Ruzayqat, Mahmoud and Najjar, Dana and Balloux, Fran{\c c}ois}
}
@article {62924,
	title = {Genomic retargeting of p53 and CTCF is associated with transcriptional changes during oncogenic HRas-induced transformation},
	journal = {Communications biologyCommunications biology},
	volume = {3},
	year = {2020},
	month = {2020},
	pages = {1-13},
	isbn = {2399-3642},
	author = {Schwartz, Michal and Portugez, Avital Sarusi and Attia, Bracha Zukerman and Tannenbaum, Miriam and Cohen, Leslie and Loza, Olga and Chase, Emily and Turman, Yousef and Kaplan, Tommy and Salah, Zaidoun}
}
@article {62994,
	title = {Genotype association of IP6K3 gene with Hashimoto{\textquoteright}s thyroiditis in Algerian population (Aures region)},
	journal = {Egyptian Journal of Medical Human GeneticsEgyptian Journal of Medical Human Genetics},
	volume = {21},
	year = {2020},
	month = {2020},
	pages = {1-6},
	isbn = {2090-2441},
	author = {Kherrour, Warda and Kalicanin, Dean and Br{\v c}i{\'c}, Luka and Hambaba, Leila and Yahia, Mouloud and Benbia, Souheyla and Perica, Vesna Boraska}
}
@article {63165,
	title = {Geomatics Contribution to Road Network Characterization Case Study: Batna City},
	journal = {Analele Universit{\u a}{\c t}ii din Oradea, Seria GeografieAnalele Universit{\u a}{\c t}ii din Oradea, Seria Geografie},
	volume = {30},
	year = {2020},
	month = {2020},
	pages = {157-156},
	author = {Abdelmoumene, M and Mahdi, K}
}
@article {62985,
	title = {A GIS-BASED MULTICRITERIA SPATIAL DECISION SUPPORT SYSTEM MODEL TO HANDLE HEALTH FACILITIES RESOURCES. CASE OF CRISIS MANAGEMENT IN BATNA, ALGERIA.},
	journal = {Geographia TechnicaGeographia Technica},
	volume = {15},
	year = {2020},
	month = {2020},
	isbn = {1842-5135},
	author = {Belkacem Lahmar and Hadda DRIDI and Ahmed Akakba}
}
@article {63041,
	title = {Global existence and stability of a nonlinear wave equation with variable-exponent nonlinearities},
	journal = {Applicable AnalysisApplicable Analysis},
	volume = {99},
	year = {2020},
	month = {2020},
	pages = {1333-1343},
	isbn = {0003-6811},
	author = {Ghegal, Samah and Hamchi, Ilhem and Messaoudi, Salim A}
}
@article {63012,
	title = {On the global solvability of the axisymmetric Boussinesq system with critical regularity},
	journal = {Nonlinear AnalysisNonlinear Analysis},
	volume = {200},
	year = {2020},
	month = {2020},
	pages = {112003},
	isbn = {0362-546X},
	author = {Houamed, Haroune and Zerguine, Mohamed}
}
@article {63018,
	title = {On the global well-posedness of axisymmetric viscous Boussinesq system in critical Lebesgue spaces},
	journal = {arXiv preprint arXiv:2002.12617arXiv preprint arXiv:2002.12617},
	year = {2020},
	month = {2020},
	author = {Hanachi, Adalet and Houamed, Haroune and Zerguine, Mohamed}
}
@article {63052,
	title = {Groundwater modelling of the Tebessa-Morsott alluvial aquifer (northeastern Algeria): A geostatistical approach},
	journal = {Groundwater for Sustainable DevelopmentGroundwater for Sustainable Development},
	volume = {11},
	year = {2020},
	month = {2020},
	pages = {100444},
	isbn = {2352-801X},
	author = {Drias, Tarek and Khedidja, Abdelhamid and Belloula, Moufida and Badraddine, Saadali and Saibi, Hakim}
}
@article {62920,
	title = {Hardware implementation of an improved control strategy for battery{\textendash}supercapacitor hybrid system in electric vehicles},
	journal = {IET Electrical Systems in TransportationIET Electrical Systems in Transportation},
	volume = {10},
	year = {2020},
	month = {2020},
	pages = {204-212},
	isbn = {2042-9738},
	author = {Sellali, Mehdi and Betka, Achour and Said Drid and Djerdir, Abdesslem and Malik, Om Parkash}
}
@article {63040,
	title = {HARDWARE IMPLEMENTATION USING XSG OF NEW FAULT DETECTION METHOD APPLIED TO ROBOT MANIPULATOR},
	journal = {Mechatronic Systems and ControlMechatronic Systems and Control},
	volume = {48},
	year = {2020},
	month = {2020},
	author = {Ghrieb, Abdel O and Kourd, Yahia and Messaoudi, Kamel and Mouss, M Djamel and Bakir, Toufik}
}
@article {63069,
	title = {Heat and mass transfer during the storage of hydrogen in LaNi5-based metal hydride: 2D simulation results for a large scale, multi-pipes fixed-bed reactor},
	journal = {International Journal of Heat and Mass TransferInternational Journal of Heat and Mass Transfer},
	volume = {147},
	year = {2020},
	month = {2020},
	pages = {118939},
	isbn = {0017-9310},
	author = {Chibani, Atef and Merouani, Slimane and Bougriou, Cherif and Hamadi, Latifa}
}
@article {62996,
	title = {Heave analysis of shallow foundations founded in swelling clayey soil at N{\textquoteright}Gaous city in Algeria},
	journal = {Studia Geotechnica et MechanicaStudia Geotechnica et Mechanica},
	volume = {42},
	year = {2020},
	month = {2020},
	pages = {210-221},
	author = {Khennouf, Abdelaziz and Baheddi, Mohamed}
}
@proceedings {62982,
	title = {A High Sensitivity Sensor Based CRLH and CSRR For Liquid mixture Identification},
	journal = {IMDC-SDSP 2020: Proceedings of the 1st International Multi-Disciplinary Conference Theme: Sustainable Development and Smart Planning, IMDC-SDSP 2020, Cyperspace, 28-30 June 202},
	year = {2020},
	month = {2020},
	pages = {347},
	publisher = {European Alliance for Innovation},
	isbn = {1-63190-261-X},
	author = {Lashab, Mohamed and Hocine, Sekkache and Belattar, Mounir and Kosha, Jamal and Mshwat, WFA and Linda, Douablia and Zermane, Aziza and Eddine, Zebiri Chemss and Abd-Alhameed, RA}
}
@article {63047,
	title = {Highly improved responsivity of self-powered UV{\textendash}Visible photodetector based on TiO2/Ag/TiO2 multilayer deposited by GLAD technique: Effects of oriented columns and nano-sculptured surface},
	journal = {Applied Surface ScienceApplied Surface Science},
	volume = {529},
	year = {2020},
	month = {2020},
	pages = {147069},
	isbn = {0169-4332},
	author = {Ferhati, Hichem and Djeffal, Faycal and Martin, Nicolas}
}
@article {63050,
	title = {Highly sensitive, ultra-low dark current, self-powered solar-blind ultraviolet photodetector based on ZnO thin-film with an engineered rear metallic layer},
	journal = {Materials Science in Semiconductor ProcessingMaterials Science in Semiconductor Processing},
	volume = {110},
	year = {2020},
	month = {2020},
	pages = {104957},
	isbn = {1369-8001},
	author = {Ferhati, Hichem and Djeffal, Faycal and Benhaya, Abdelhamid and Martin, Nicolas}
}
@article {63132,
	title = {Holonic agent-based approach for system-level remaining useful life estimation with stochastic dependence},
	journal = {International Journal of Computer Integrated ManufacturingInternational Journal of Computer Integrated Manufacturing},
	volume = {33},
	year = {2020},
	month = {2020},
	pages = {1089-1104},
	isbn = {0951-192X},
	author = {Benaggoune, Khaled and LH Mouss and Abdessemed, AA and Bensakhria, M}
}
@article {63108,
	title = {How altitudinal gradient affects the diversity and composition of benthic insects in arid areas streams of northern East Algeria?},
	journal = {BiologiaBiologia},
	volume = {75},
	year = {2020},
	month = {2020},
	pages = {567-577},
	isbn = {1336-9563},
	author = {Im{\`e}ne Benzina and Abdelkrim Si Bachir and Cherif Ghazi and Fr{\'e}d{\'e}ric Santoul and R{\'e}gis C{\'e}r{\'e}ghino}
}
@proceedings {62897,
	title = {Human detection in surveillance videos using MobileNet},
	journal = {2020 2nd International Conference on Computer and Information Sciences (ICCIS)},
	year = {2020},
	month = {2020},
	pages = {1-5},
	publisher = {IEEE},
	isbn = {1-72815-467-7},
	author = {Yassine, Bouafia and GUEZOULI Larbi and Hicham, Lakhlef}
}
@article {63157,
	title = {A hybrid algorithm for wave-front corrections applied to satellite-to-ground laser communication},
	journal = {TelkomnikaTelkomnika},
	volume = {18},
	year = {2020},
	month = {2020},
	pages = {1259-1267},
	isbn = {1693-6930},
	author = {Al Gobi, Mohammed Senan and Benatia, Djamel and Bali, Mouadh}
}
@article {63065,
	title = {Hybrid fuzzy reference signal tracking control of a doubly fed induction generator},
	journal = {International Journal of EngineeringInternational Journal of Engineering},
	volume = {33},
	year = {2020},
	month = {2020},
	pages = {567-574},
	isbn = {1025-2495},
	author = {Choug, N and Benaggoune, S and Belkacem, S}
}
@proceedings {62958,
	title = {Hybrid Heuristic Optimization of an Integrated Production Distribution System with Stock and Transportation Costs},
	journal = {International Conference on Computing Systems and Applications},
	year = {2020},
	month = {2020},
	pages = {118-130},
	publisher = {Springer},
	author = {Mohamed, Bensakhria and Samir Abdelhamid}
}
@article {63167,
	title = {HYBRID MULTI-AGENT AND IMMUNE ALGORITHM APPROACH TO HYBRID FLOW SHOPS SCHEDULING WITH SDST.},
	journal = {Academic Journal of Manufacturing EngineeringAcademic Journal of Manufacturing Engineering},
	volume = {18},
	year = {2020},
	month = {2020},
	isbn = {1583-7904},
	author = {Abdelhadi, Adel and Leila Hayet Mouss and Ouahab KADRI}
}
@article {62909,
	title = {A Hybrid Protocol to Solve Authenticated Byzantine Consensus},
	journal = {Fundamenta InformaticaeFundamenta Informaticae},
	volume = {173},
	year = {2020},
	month = {2020},
	pages = {73-89},
	isbn = {0169-2968},
	author = {Tioura, Abdelhamid and Hamouma Moumen and Kalla, Hamoudi and Ait Saidi, Ahmed}
}
@article {63009,
	title = {Hydrochemical characterisation of groundwater quality: Merdja plain (Tebessa town, Algeria)},
	journal = {Civil Engineering JournalCivil Engineering Journal},
	volume = {6},
	year = {2020},
	month = {2020},
	pages = {318-325},
	isbn = {2476-3055},
	author = {Houria, Baazi and Kalla Mahdi and Zohra, Tebbi Fatima}
}
@article {63088,
	title = {Identifying groundwater degradation sources in a Mediterranean coastal area experiencing significant multi-origin stresses},
	journal = {Science of The Total EnvironmentScience of The Total Environment},
	volume = {746},
	year = {2020},
	month = {2020},
	pages = {141203},
	isbn = {0048-9697},
	author = {Boumaiza, Lamine and Chesnaux, Romain and Drias, Tarek and Walter, Julien and Huneau, Fr{\'e}d{\'e}ric and Garel, Emilie and Knoeller, Kay and Stumpp, Christine}
}
@article {63004,
	title = {The impact of African-trained neurosurgeons on sub-Saharan Africa},
	journal = {Neurosurgical FocusNeurosurgical Focus},
	volume = {48},
	year = {2020},
	month = {2020},
	pages = {E4},
	isbn = {1092-0684},
	author = {Karekezi, Claire and El Khamlichi, Abdeslam and El Ouahabi, Abdessamad and El Abbadi, Najia and Ahokpossi, Semevo Alidegnon and Ahanogbe, Kodjo Mensah Hobli and Berete, Ibrahima and Bouya, Soueilem Mohamed and Coulibaly, Oumar and Dao, Ibrahim}
}
@article {63158,
	title = {The impact of COVID-19 on rheumatology practice across Africa},
	journal = {Rheumatology (Oxford, England)Rheumatology (Oxford, England)},
	volume = {60},
	year = {2020},
	month = {10 2020},
	pages = {392{\textendash}398},
	abstract = {Objectives To identify the changes in rheumatology service delivery across the five regions of Africa from the impact of the COVID-19 pandemic. Methods The COVID-19 African Rheumatology Study Group created an online survey consisting of 40 questions relating to the current practices and experiences of rheumatologists across Africa. The CHERRIES checklist for reporting results of internet e-surveys was adhered to. Results A total of 554 completed responses were received from 20 countries, which include six in Northern Africa, six in West Africa, four in Southern Africa, three in East Africa and one in Central Africa. Consultant grade rheumatologists constituted 436 (78.7\%) of respondents with a mean of 14.5 {\textpm} 10.3 years of experience. A total of 77 (13.9\%) rheumatologists avoided starting a new biologic. Face-to-face clinics with the use of some personal protective equipment continued to be held in only 293 (52.9\%) rheumatologists{\textquoteright} practices. Teleconsultation modalities found usage as follows: telephone in 335 (60.5\%), WhatsApp in 241 (43.5\%), emails in 90 (16.3\%) and video calls in 53 (9.6\%). Physical examinations were mostly reduced in 295 (53.3\%) or done with personal protective equipment in 128 (23.1\%) practices. Only 316 (57.0\%) reported that the national rheumatology society in their country had produced any recommendation around COVID-19 while only 73 (13.2\%) confirmed the availability of a national rheumatology COVID-19 registry in their country. Conclusion COVID-19 has shifted daily rheumatology practices across Africa to more virtual consultations and regional disparities are more apparent in the availability of local protocols and registries.},
	author = {Akintayo, Richard and Akpabio, Akpabio and Kalla, Asgar and Dey, Dzifa and Migowa, Angela and Olaosebikan, Babatunde and Bahiri, Rachid and Miedany, Yasser and Djohra HADEF and Hamdi, Wafa and Oyoo, Omondi and Samy SLIMANI and Yerima, A. and Taha, Yassmin and Adebajo, Adewale and Adelowo, Olufemi and Tikly, Mohammed and Ghozlani, Imad and Ben Abdelghani, Khaoula and Abdel-Magied, Rasha}
}
@article {63035,
	title = {Impact of hygienic slaughter practices on Salmonella contamination of broiler carcasses in Biskra, Algeria},
	journal = {Veterinarska stanicaVeterinarska stanica},
	volume = {51},
	year = {2020},
	month = {2020},
	pages = {463-470},
	isbn = {0350-7149},
	author = {Guergueb, Nadjah and Allooui, Nadir and Chachoua, Ilhem and Ammar Ayachi and Bennoun, Omar and Aoun, Laila}
}
@proceedings {63115,
	title = {Impact of Mobility Models on Energy Consumption in Unmanned Aerial Ad-Hoc Network},
	journal = {2020 IEEE 45th Conference on Local Computer Networks (LCN)},
	year = {2020},
	month = {2020},
	pages = {361-364},
	publisher = {IEEE},
	isbn = {1-72817-158-X},
	author = {Bensalem, Amina and Djallel Eddine Boubiche and Zhou, Fen and Rachedi, Abderrezak and Mellouk, Abdelhamid}
}
@article {63122,
	title = {Improved field oriented control for stand alone dual star induction generator used in wind energy conversion},
	journal = {Engineering ReviewEngineering Review},
	volume = {40},
	year = {2020},
	month = {04 2020},
	pages = {34},
	abstract = {This paper presents a novel direct rotor flux oriented control with online estimation of magnetizing current and magnetizing inductance applied to self-excited dual star induction generator equipping a wind turbine in remote sites. The induction generator is connected to nonlinear load through two PWM rectifiers. The fuzzy logic controller is used to ensure the DC bus voltage a constant value when changes in speed and load conditions. In this study, a performance comparison between the conventional approach and the novel approach is made. The proposed control strategy is validated by simulation in Matlab/Simulink.},
	author = {BENDJEDDOU, YACINE and Abdessemed, Rachid and MERABET, ELKHEIR}
}
@article {63127,
	title = {Improved InxGa1_xP/GaAs/Ge tandem solar cell using light trapping engineering and multi-objective optimization approach},
	journal = {OptikOptik},
	volume = {223},
	year = {2020},
	month = {2020},
	pages = {165346},
	isbn = {0030-4026},
	author = {Bencherif, H and Dehimi, L and Pezzimenti, F and Yousfi, A and Abdi, MA and Saidi, L and Della Corte, FG}
}
@article {62912,
	title = {Improved performance of nanoscale junctionless carbon nanotube tunneling FETs using dual-material source gate design: A quantum simulation study},
	journal = {AEU-International Journal of Electronics and CommunicationsAEU-International Journal of Electronics and Communications},
	volume = {127},
	year = {2020},
	month = {2020},
	pages = {153491},
	isbn = {1434-8411},
	author = {Tamersit, Khalil}
}
@article {62962,
	title = {Improvement by projection for integro-differential equations},
	journal = {Mathematical Methods in the Applied SciencesMathematical Methods in the Applied Sciences},
	year = {2020},
	month = {2020},
	isbn = {0170-4214},
	author = {MENNOUNI, ABDELAZIZ}
}
@article {62951,
	title = {Improvement of a Hypoplastic Model for Granular Materials Under High-Confining Pressures},
	journal = {Geotechnical and Geological EngineeringGeotechnical and Geological Engineering},
	volume = {38},
	year = {2020},
	month = {2020},
	pages = {3761-3771},
	isbn = {1573-1529},
	author = {Moussa, Amrane and Salah, Messast and Rafik, Demagh}
}
@article {63084,
	title = {Improving barrier and operational risk analysis (BORA) using criticality importance analysis case study: oil and gas separator},
	journal = {World Journal of Engineering, Vol. ahead-of-print. 2020,World Journal of Engineering, Vol. ahead-of-print. 2020,},
	year = {2020},
	month = {2020},
	abstract = {Purpose The purpose of this paper is to show the impact of operational and environmental conditions (risk influencing factors) on the component criticality of safety barriers, safety barrier performance and accidents frequency and therefore on risk levels. Design/methodology/approach The methodology focuses on the integration of criticality importance analysis in barrier and operational risk analysis method, abbreviated as BORA-CIA. First, the impact of risk influencing factors (RIFs) associated with basic events on safety barrier performance and accident frequency is studied, and then, a risk evaluation is performed. Finally, how unacceptable risks can be mitigated regarding risk criteria is analyzed. Findings In the proposed approach (BORA-CIA), the authors show how specific installation conditions influence risk levels and analyze the prioritization of components to improve safety barrier performance in oil and gas process. Practical implications The proposed methodology seems to be a powerful tool in risk decision. Ordering components of safety barriers taking into account RIFs allow maintenance strategies to be undertaken according to the real environment far from average data. Also, maintenance costs would be estimated adequately. Originality/value In this paper, an improved BORA method is developed by incorporating CIA. More precisely, the variability of criticality importance factors of components is used to analyze the prioritization of maintenance actions in an operational environment.},
	author = {BOURARECHE, M. and NAIT-SAID, R. and Zidani, F. and OUAZRAOUI, N.}
}
@article {62952,
	title = {In vitro photoprotective, hemostatic, anti-inflammatory and antioxidant activities of the species Linaria scariosa Desf.},
	journal = {South African Journal of BotanySouth African Journal of Botany},
	volume = {130},
	year = {2020},
	month = {2020},
	pages = {383-388},
	isbn = {0254-6299},
	author = {Mouffouk, Chaima and Mouffouk, Soumia and Oulmi, Kafia and Mouffouk, Sara and Haba, Hamada}
}
@proceedings {62989,
	title = {Indirect Fuzzy Adaptive Synchronization and Control of a Grid-Connected DFIG-Based WECS},
	journal = {2020 International Conference on Control, Automation and Diagnosis (ICCAD)},
	year = {2020},
	month = {2020},
	pages = {1-6},
	publisher = {IEEE},
	isbn = {1-72816-999-2},
	author = {Labdai, S and Alibi, A and Chrifi-Alaoui, L and Drid, S and Hemici, B and Nezli, L}
}
@article {62922,
	title = {Inelastic response of soil-pile-structure interaction system under lateral loading: a parametric study},
	journal = {Jordan Journal of Civil EngineeringJordan Journal of Civil Engineering},
	volume = {14},
	year = {2020},
	month = {2020},
	isbn = {1993-0461},
	author = {Sekhri, Khadidja and Yahiaoui, Djarir and Abbache, Khlifa}
}
@article {62907,
	title = {Inertial interaction effects analysis on the estimating of dynamic amplification factor for reinforced concrete structures},
	journal = {Journal of Building Pathology and RehabilitationJournal of Building Pathology and Rehabilitation},
	volume = {5},
	year = {2020},
	month = {2020},
	pages = {1-24},
	isbn = {2365-3167},
	author = {TORKIA, HAITEM and Lahbari, Noureddine}
}
@article {63139,
	title = {Influence of season on stereological and histomorphometric characteristics of testes of Ouled Djellal rams in Algeria},
	journal = {The Thai Journal of Veterinary MedicineThe Thai Journal of Veterinary Medicine},
	volume = {50},
	year = {2020},
	month = {2020},
	pages = {297-304},
	isbn = {0125-6491},
	author = {BELKHIRI, Yamina and Benbia, Souheyla and Djaout, Amal}
}
@article {62965,
	title = {Integration of geoelectric and hydrochemical approaches for delineation of groundwater potential zones in alluvial aquifer},
	journal = {Journal of Groundwater Science and EngineeringJournal of Groundwater Science and Engineering},
	volume = {8},
	year = {2020},
	month = {2020},
	pages = {366-380},
	isbn = {2305-7068},
	author = {Mehmood, Qaisar and Arshad, Muhammad and Rizwan, Muhammad and Hamid, Shanawar and Mehmood, Waqas and Muneer, Muhammad Ansir and Irfan, Muhammad and Anjum, Lubna}
}
@article {62890,
	title = {Intelligent Industrial Process Control Based on Fuzzy Logic and Machine Learning},
	journal = {International Journal of Fuzzy System Applications (IJFSA)International Journal of Fuzzy System Applications (IJFSA)},
	volume = {9},
	year = {2020},
	month = {2020},
	pages = {92-111},
	author = {Hanane Zermane and Rached Kasmi}
}
@article {63141,
	title = {An Interactive Method to Analysis of the Response of the Different Reinforcement Structures of a Door Opening of a Wind Tower},
	journal = {Periodica Polytechnica Mechanical EngineeringPeriodica Polytechnica Mechanical Engineering},
	volume = {64},
	year = {2020},
	month = {2020},
	pages = {263-272},
	isbn = {1587-379X},
	author = {Belhadj, Mourad and Lahbari, Noureddine and Slimane, Abdelkader and Aouiche, Djamel}
}
@article {63091,
	title = {An investigation into unsafe behaviors and traffic accidents involving unlicensed drivers: a perspective for alignment measurement},
	journal = {International Journal of Environmental Research and Public HealthInternational Journal of Environmental Research and Public Health},
	volume = {17},
	year = {2020},
	month = {2020},
	pages = {6743},
	author = {Wafa Boulagouas and Susana Garc{\'\i}a-Herrero and Rachid Chaib and Juan Diego Febres and Miguel {\'A}ngel Mariscal and M{\'e}barek Djebabra}
}
@article {63059,
	title = {Investigation on the effects of acoustic liner variation and geometry discontinuities on the acoustic performance of lined ducts},
	journal = {Archives of AcousticsArchives of Acoustics},
	volume = {45},
	year = {2020},
	month = {2020},
	isbn = {0137-5075},
	author = {Dhief, Raja and Makni, Amine and Taktak, Mohamed and CHAABANE, MABROUK and Haddar, Mohamed}
}
@proceedings {63031,
	title = {An IoT-Based Adaptive Traffic Light Control Algorithm for Isolated Intersection},
	journal = {International Conference on Computing Systems and Applications},
	year = {2020},
	month = {2020},
	pages = {107-117},
	publisher = {Springer},
	author = {Tarek Amine Haddad and Djalal HEDJAZI and Sofiane Aouag}
}
@article {62898,
	title = {IS-MRAS with on-line adaptation parameters based on type-2 fuzzy logic for sensorless control of IM},
	journal = {Iranian Journal of Electrical and Electronic EngineeringIranian Journal of Electrical and Electronic Engineering},
	volume = {16},
	year = {2020},
	month = {2020},
	pages = {85-95},
	author = {Yassine, B and Fatiha, Z and Chrifi-Alaoui, L}
}
@article {63030,
	title = {Juvenile Idiopathic Arthritis. Advances and Challenges},
	journal = {Batna Journal of Medical Sciences (BJMS)Batna Journal of Medical Sciences (BJMS)},
	volume = {7},
	year = {2020},
	month = {11 2020},
	pages = {176-181},
	abstract = {L{\textquoteright}arthrite juv{\'e}nile idiopathique (AJI) est la cause la plus fr{\'e}quente du rhumatisme chez l{\textquoteright}enfant. L{\textquoteright}AJI est un terme g{\'e}n{\'e}rique qui regroupe toutes les formes d{\textquoteright}arthrite chronique d{\textquoteright}origine inconnue apparaissant avant l{\textquoteright}{\^a}ge de 16 ans. La classification des diff{\'e}rentes entit{\'e}s de l{\textquoteright}AJI {\'e}tait et reste toujours un sujet de discussion et de raffinement. La distinction de groupes plus homog{\`e}nes permettra une th{\'e}rapeutique plus cibl{\'e}e. Le diagnostic de l{\textquoteright}AJI est un diagnostic d{\textquoteright}exclusion et il est purement clinique. Aucun test biologique n{\textquoteright}est sp{\'e}cifique. Les explorations sont utiles dans le diagnostic diff{\'e}rentiel et dans la d{\'e}finition de la sous-classification de la maladie. {\'E}tablir le diagnostic d{\textquoteright}une forme d{\textquoteright}AJI est un d{\'e}fi qui n{\'e}cessite parfois la demande d{\textquoteright}avis d{\textquoteright}expert pour une meilleure prise en charge diagnostique et th{\'e}rapeutique. Il n{\textquoteright}existe aucun traitement curatif pour l{\textquoteright}AJI jusqu{\textquoteright}aujourd{\textquoteright}hui. Les avanc{\'e}es de connaissances de m{\'e}canismes physiopathologiques ont permis une meilleure approche th{\'e}rapeutique de l{\textquoteright}inflammation. L{\textquoteright}av{\`e}nement de la bioth{\'e}rapie ces derni{\`e}res d{\'e}cennies a r{\'e}volutionn{\'e} la prise en charge de l{\textquoteright}AJI et a nettement am{\'e}lior{\'e} le pronostic.},
	author = {Djohra HADEF and Samy SLIMANI}
}
@article {63160,
	title = {L{\textquoteright}analyse du discours m{\'e}diatique: l{\textquoteright}expression phatique dans les interactions radiophoniques Alger chaine 3.},
	journal = {مجلة إشكالات في اللغة و الأدبمجلة إشكالات في اللغة و الأدب},
	volume = {9},
	year = {2020},
	month = {2020},
	pages = {699-716},
	isbn = {2600-6634},
	author = {Abrouk, Nadia and Samir Abdelhamid}
}
@article {63046,
	title = {LC{\textendash}DAD/ESI{\textendash}MS/MS characterization of phenolic constituents in Rosa canina L. and its protective effect in cells},
	journal = {Biomedical ChromatographyBiomedical Chromatography},
	volume = {34},
	year = {2020},
	month = {2020},
	pages = {e4961},
	isbn = {0269-3879},
	author = {SamiraFetni and Nabil Bertella and Ammar Ouahab}
}
@article {63002,
	title = {Le d{\'e}veloppement de la comp{\'e}tence culturelle en classe de FLE: les enseignants du cycle moyen entre th{\'e}orie et pratique},
	journal = {DidactiquesDidactiques},
	volume = {8},
	year = {2020},
	month = {2020},
	pages = {102-125},
	isbn = {2600-7002},
	author = {Khadraoui, Errime and Laidoudi, Assia}
}
@proceedings {62992,
	title = {L{\textquoteright}impact de la dimension culturelle sur l{\textquoteright}acquisition de la langue fran{\c c}aise {\`a} l{\textquoteright}{\`e}re de la nouvelle r{\'e}forme {\'e}ducative alg{\'e}rienne: d{\'e}fis et enjeux},
	journal = {Un certain regard. La langue fran{\c c}aise pour penser, appr{\'e}hender et exprimer le monde: actes du XXVIIIe Colloque AFUE [Recurso electr{\'o}nico]},
	year = {2020},
	month = {2020},
	pages = {201-208},
	publisher = {UAM},
	isbn = {84-8344-758-4},
	author = {Khiari, Iness Rayane and Meziani, Amina}
}
@article {62900,
	title = {A LINEAR HYBRID MULTI-USER DETECTOR BASED ON SUCCESSIVE INTERFERENCE CANCELLATION AND DECORRELATOR DETECTOR FOR DS/CDMA SYSTEM},
	journal = {Telecommunications and Radio EngineeringTelecommunications and Radio Engineering},
	volume = {79},
	year = {2020},
	month = {2020},
	isbn = {0040-2508},
	author = {Yakhelef, Mohammed and Saidi, L}
}
@article {62901,
	title = {Low-complexity iterative detection based on parametric aor for uplink massive mimo systems},
	journal = {Telecommunications and Radio EngineeringTelecommunications and Radio Engineering},
	volume = {79},
	year = {2020},
	month = {2020},
	isbn = {0040-2508},
	author = {Yakhelef, Mohammed and Saidi, L}
}
@article {63020,
	title = {LSTR: lightweight and secure tree-based routing for wireless sensor networks},
	journal = {Wireless Personal CommunicationsWireless Personal Communications},
	volume = {112},
	year = {2020},
	month = {2020},
	pages = {1479-1501},
	isbn = {1572-834X},
	author = {Hamouid, Khaled and Othmen, Salwa and Barkat, Amine}
}
@article {62928,
	title = {M.(2020). Elaboration of an Erosion Map Using the Analytical Hierarchy Process (AHP) Case of the Region of Constantine (Algeria)},
	journal = {Analele Universit{\u a}{\c t}ii din Oradea, Seria GeografieAnalele Universit{\u a}{\c t}ii din Oradea, Seria Geografie},
	volume = {30},
	year = {2020},
	month = {2020},
	pages = {1-9},
	author = {Sami, G and Abdelwahhab, F and Issam, K}
}
@article {62972,
	title = {Mechanical Behavior of Particle Reinforced Thermoplastic Matrix Composites Using Finite Element Modeling},
	year = {2020},
	month = {2020},
	author = {Mansouri, K and Djebaili, H and Brioua, M}
}
@article {62934,
	title = {Mechanical response of η-layered borophene: impact of strain, temperature, vacancies and intercalation},
	journal = {The European Physical Journal Applied PhysicsThe European Physical Journal Applied Physics},
	volume = {90},
	year = {2020},
	month = {2020},
	pages = {30401},
	isbn = {1286-0042},
	author = {Saaoud, Mohamed and Sadki, Kawtar and Drissi, Lalla Btissam and Djeffal, Faycal}
}
@inbook {63102,
	title = {Mechanisms to secure communications in the IoT},
	booktitle = {Securing the Internet of Things: Concepts, Methodologies, Tools, and Applications},
	year = {2020},
	month = {2020},
	pages = {498-521},
	publisher = {IGI Global},
	organization = {IGI Global},
	author = {Azeddine Bilami and Somia Sahraoui}
}
@article {63007,
	title = {Minimising makespan in embedded real-time systems with failure rate requirements},
	journal = {International Journal of Industrial and Systems EngineeringInternational Journal of Industrial and Systems Engineering},
	volume = {35},
	year = {2020},
	month = {2020},
	pages = {451-462},
	isbn = {1748-5037},
	author = {Kalla, Salim and Bendib, Sonia Sabrina and Riadh, Hocine and Kalla, Hamoudi}
}
@proceedings {63026,
	title = {Minimizing energy consumption in a Job Shop problem with unidirectional transport constraint},
	journal = {2020 IEEE 13th International Colloquium of Logistics and Supply Chain Management (LOGISTIQUA)},
	year = {2020},
	month = {2020},
	pages = {1-6},
	publisher = {IEEE},
	isbn = {1-72819-881-X},
	author = {Hadri, A and Belkaid, F and Bougloula, A}
}
@article {62943,
	title = {Mixing in turbulent compressible heated coaxial jets: A numerical study},
	journal = {International Journal of Hydrogen EnergyInternational Journal of Hydrogen Energy},
	volume = {45},
	year = {2020},
	month = {2020},
	pages = {16816-16837},
	isbn = {0360-3199},
	author = {Ouzani, Riadh and Si-Ameur, Mohamed and Khelladi, Sofiane and Danlos, Am{\'e}lie}
}
@proceedings {63147,
	title = {Mobility Based Genetic Algorithm for Heterogeneous Wireless Networks},
	journal = {International Conference on Machine Learning for Networking},
	year = {2020},
	month = {2020},
	pages = {93-106},
	publisher = {Springer},
	author = {Kamel Barka and Lyamine Guezouli and Samir Gourdache and Ameghchouche, Sara}
}
@article {62935,
	title = {Model experiments to assess effect of cavities on bearing capacity of two interfering superficial foundations resting on granular soil},
	journal = {Studia Geotechnica et MechanicaStudia Geotechnica et Mechanica},
	volume = {42},
	year = {2020},
	month = {2020},
	pages = {222-231},
	author = {Saadi, Djamel and Abbeche, Khelifa and Boufarh, Rafik}
}
@proceedings {63025,
	title = {Modeling and Analysing the Influence of both Frequency and Mechanical Stress on Ferromagnetic Sheets NO Fe 3\% Si using Improved Low Frequency Diffusion Equation Model},
	journal = {2020 4th International Conference on Advanced Systems and Emergent Technologies (IC_ASET)},
	year = {2020},
	month = {2020},
	pages = {100-105},
	publisher = {IEEE},
	isbn = {1-72816-356-0},
	author = {Hamada, Souad and Louai, Fatirna-Zohra and Nasreddine NAIT-SAID}
}
@proceedings {63166,
	title = {Modeling and Simulation of a Photovoltaic Generator Based Non-Linear Backstepping Control for Maximum Power Point Tracking},
	journal = {International Pluridisciplinary PhD Meeting (IPPM{\textquoteright}20) Edition, February23-26, },
	year = {2020},
	month = {2020},
	publisher = {EasyChair},
	address = {El Oued, Algeria},
	abstract = {
	In this paper, we propose a no-linear backstepping method of control to look for a maximum power point of the MPPT techniques used in the implementation of photovoltaic power systems. It will discuss between Perturb \&amp; Observe and Backstpping techniques used in tracking maximum power in photovoltaic arrays. Lyapunov{\textquoteright}s method is used to archive the stabilization objectives. The proposed model is realized using power system block set under Matlab/SIMULINK.

},
	isbn = {2516-2314},
	url = {https://yahootechpulse.easychair.org/publications/preprint_download/fR4h},
	author = {Abdelkader, Saidi and Azoui  Boubekeur and Chaouki, Ghenai}
}
@article {62964,
	title = {Modeling of a smart nano force sensor using finite elements and neural networks},
	journal = {International Journal of Automation and ComputingInternational Journal of Automation and Computing},
	volume = {17},
	year = {2020},
	month = {2020},
	pages = {279-291},
	isbn = {1751-8520},
	author = {Menacer, Farid and Kadr, Abdelmalek and Zohir Dibi}
}
@article {63082,
	title = {Modelling of void shape effect on effective thermal conductivity of lotus-type porous materials},
	journal = {Mechanics of MaterialsMechanics of Materials},
	volume = {151},
	year = {2020},
	month = {2020},
	pages = {103626},
	isbn = {0167-6636},
	author = {Bourih, K and Kaddouri, W and Kanit, T and Djebara, Y and Imad, A}
}
@article {62961,
	title = {Modelling the surface water quality of the Agrioune River in the north-east of Algeria by the PEGASE model},
	journal = {International Journal of River Basin ManagementInternational Journal of River Basin Management},
	volume = {18},
	year = {2020},
	month = {2020},
	pages = {477-490},
	isbn = {1571-5124},
	author = {Merah, Ferhat and Boudoukha, Abderrahmane and Grard, Aline and Everbecq, Etienne and Magermans, Pol and Deli{\`e}ge, Jean Fran{\c c}ois}
}
@article {62926,
	title = {A multi-criteria analytical hierarchy process (AHP) to flood vulnerability assessment in Batna watershed (Algeria)},
	journal = {Analele Universit{\u a}{\c t}ii din Oradea, Seria GeografieAnalele Universit{\u a}{\c t}ii din Oradea, Seria Geografie},
	volume = {30},
	year = {2020},
	month = {2020},
	pages = {41-47},
	author = {Sami, G and Hadda, D and Mahdi, K and Abdelwahhab, F}
}
@article {63164,
	title = {Multi-criteria Method (WLC) and GIS Modeling to Analyze Soil Erosion Vulnerability in Constantine City (Algeria)},
	journal = {Analele Universit{\u a}{\c t}ii din Oradea, Seria GeografieAnalele Universit{\u a}{\c t}ii din Oradea, Seria Geografie},
	volume = {30},
	year = {2020},
	month = {2020},
	pages = {141-146},
	author = {Abdelwahhab, F and Sami, G and Yahyaoui, H and Rabah, B}
}
@article {63061,
	title = {Multi-criterion analysis based on integrated process-risk optimization J},
	journal = {ournal of Engineering, Design and Technology , Vol. ahead-of-print 2020,ournal of Engineering, Design and Technology , Vol. ahead-of-print 2020,},
	year = {2020},
	month = {2020},
	abstract = {Purpose This paper aims to propose a process optimization approach showing how organizations are able to achieve sustainable and efficient process optimization, based on integrated process-risk analysis using several criteria to a better decision-making. Design/methodology/approach Several approaches are used (functional/dysfunctional) to analyze how processes work and how to deal with risks forming multi-criteria decision-making. In addition, a risk factor is integrated into the structured analysis and design techniques (SADT) method forming a novel graphical view SADT-RISK; it identifies process{\textquoteright}s failures using the traditional failure modes, effects and criticality analysis (FMECA) and economic consideration {\textquotedblleft}failure mode and effect, criticality analysis-cost FMECA-C{\textquotedblright} making a multi-criterion matrix for better decision-making. Subsequently, some recommendations are proposed to overcome the failure. Findings This paper illustrates a methodology with a case study in a company, which has a leading brand in the market in Algeria. The authors are integrating a varied portfolio of approaches linking with each other to analyze, improve and optimize the processes in terms of reliability and safety to deal with risks; reduce the complexity of the systems; increase the performance; and achieve a safer process. However, the proposed method can be readily used in practice. Originality/value The paper provides a new approach based on integrated management using new elements as an innovative contribution, forming a novel graphical view SADT-RISK; it identifies process{\textquoteright}s failures using the traditional FMECA and economic consideration {\textquotedblleft}a new multi-criterion matrix for better decision-making and using the SWOT analysis {\textendash} Strengths, Weaknesses, Opportunities, Threats {\textendash} as a balance to decide about the process improvement{\textquotedblright}. The authors conclude that this methodology is oriented and applicable to different types of companies such as financial, health and industrial as illustrated by this case study.},
	author = {DERRADJI, R. and HAMZI, R.}
}
@article {63060,
	title = {Multi-criterion analysis based on integrated process-risk optimization},
	journal = {Journal of Engineering, Design and TechnologyJournal of Engineering, Design and Technology},
	year = {2020},
	month = {2020},
	isbn = {1726-0531},
	author = {Derradji, Rima and HAMZI, Rachida}
}
@article {63008,
	title = {Multi-view model-driven projection to facilitate the control of the evolution and quality of the architecture},
	journal = {International Journal of Software Innovation (IJSI)International Journal of Software Innovation (IJSI)},
	volume = {8},
	year = {2020},
	month = {2020},
	pages = {21-39},
	author = {Salim Kadri and Sofiane Aouag and Djalal HEDJAZI}
}
@article {62948,
	title = {Neuro-fuzzy sliding mode controller based on a brushless doubly fed induction generator},
	journal = {International Journal of EngineeringInternational Journal of Engineering},
	volume = {33},
	year = {2020},
	month = {2020},
	pages = {248-256},
	isbn = {1025-2495},
	author = {Ouada, L and Benaggoune, S and Belkacem, S}
}
@article {62886,
	title = {A new approach agent-based for distributing association rules by business to improve decision process in ERP systems},
	journal = {International Journal of Information and Decision SciencesInternational Journal of Information and Decision Sciences},
	volume = {12},
	year = {2020},
	month = {2020},
	pages = {1-35},
	isbn = {1756-7017},
	author = {Zoubeidi, Merouane and Okba KAZAR and BENHARZALLAH, Saber and Mesbahi, Nadjib and Merizig, Abdelhak and Rezki, Djamil}
}
@article {62960,
	title = {New chaotic cryptosystem for the image encryption},
	journal = {International Journal of Information and Computer SecurityInternational Journal of Information and Computer Security},
	volume = {12},
	year = {2020},
	month = {2020},
	pages = {450-463},
	isbn = {1744-1765},
	author = {Merzoug, Assia and Ali-Pacha, Adda and Hadj-Said, Naima}
}
@article {63077,
	title = {New fusion and selection approaches for estimating the remaining useful life using Gaussian process regression and induced ordered weighted averaging operators},
	journal = {Quality and Reliability Engineering InternationalQuality and Reliability Engineering International},
	volume = {36},
	year = {2020},
	month = {2020},
	pages = {2146-2169},
	isbn = {0748-8017},
	author = {Bouzenita, Mohammed and Mouss, Leila-Hayet and Farid Melgani and Bentrcia, Toufik}
}
@article {62978,
	title = {A New Mobile Collaborative Approach Based Relays for Wireless Sensor Networks},
	journal = {International Journal of Information Science and TechnologyInternational Journal of Information Science and Technology},
	volume = {4},
	year = {2020},
	month = {2020},
	pages = {31-38},
	isbn = {2550-5114},
	author = {Lyamine, Guezouli and Kamel, Barka and Souheila, Bouam}
}
@proceedings {62933,
	title = {A new Reinforcement Learning based for Energy-efficient Multi-channel Data Gathering in Wireless Sensor Networks},
	journal = {2020 4th International Symposium on Informatics and its Applications (ISIA)},
	year = {2020},
	month = {2020},
	pages = {1-7},
	publisher = {IEEE},
	isbn = {1-72819-652-3},
	author = {Sahraoui, Mohamed and Azeddine Bilami}
}
@article {62993,
	title = {New Thresholding Technique in DCT Domain for Interference Mitigation in GNSS Receivers.},
	journal = {Traitement du SignalTraitement du Signal},
	volume = {37},
	year = {2020},
	month = {2020},
	isbn = {0765-0019},
	author = {Khezzar, Zaki Aissam and Benzid, Redha and Saidi, Lamir}
}
@article {63163,
	title = {Novel design of a fractional wavelet and its application to image denoising},
	journal = {Bulletin of Electrical Engineering and InformaticsBulletin of Electrical Engineering and Informatics},
	volume = {9},
	year = {2020},
	month = {2020},
	pages = {129-140},
	isbn = {2302-9285},
	author = {Abderrahim, Lanani and Salama, Meghriche and Abdelbaki, Djouambi}
}
@article {62921,
	title = {A Novel Energy Management Strategy in Electric Vehicle Based on H$\infty$ Self-Gain Scheduled for Linear Parameter Varying Systems},
	journal = {IEEE Transactions on Energy ConversionIEEE Transactions On Energy Conversion},
	volume = {36},
	year = {2020},
	month = {2020},
	pages = {767-778},
	isbn = {0885-8969},
	author = {Sellali, Mehdi and Betka, Achour and Djerdir, Abdesslem and Yang, Yongheng and Bahri, Imene and Said Drid}
}
@proceedings {63049,
	title = {Novel Infrared phototransistor based on Junctionless TFET design: Numerical Analysis and Performance Assessment},
	journal = {Proceedings of the 10th International Conference on Information Systems and Technologies},
	year = {2020},
	month = {2020},
	pages = {1-5},
	author = {Ferhati, Hichem and Djeffal, Faycal and Bentrcia, Toufik}
}
@article {63023,
	title = {Numerical Analysis of Bearing Capacity of Strip Footing Built on Geogrid-Reinforced Sand Slope Over Soft Clay Layer (revised version 3)},
	journal = {Arabian Journal for Science and EngineeringArabian Journal for Science and Engineering},
	volume = {45},
	year = {2020},
	month = {2020},
	pages = {8269-8279},
	isbn = {2191-4281},
	author = {Hamidi, Ahmed and Abbeche, Khelifa}
}
@article {62995,
	title = {Numerical Approximation of the Exact Control for the Vibrating Rod with Improvement of the Final Error by Particle Swarm Optimization},
	journal = {Nonlinear Dynamics and Systems TheoryNonlinear Dynamics and Systems Theory},
	volume = {20},
	year = {2020},
	month = {2020},
	pages = {179-190},
	author = {Khernane, A}
}
@article {63168,
	title = {Numerical Investigation of the Effects of Channel Cross Section Shape on the Tubular PEMFC Performance},
	journal = {Journal of Advanced Research in Fluid Mechanics and Thermal SciencesJournal of Advanced Research in Fluid Mechanics and Thermal Sciences},
	volume = {66},
	year = {2020},
	month = {2020},
	pages = {84-103},
	isbn = {2289-7879},
	author = {Abdallah, Mohammedi and Hocine, Ben Moussa and Tamerabet Monsaf and Youcef, Sahli}
}
@article {62944,
	title = {Numerical study of two-dimensional salt-finger convection},
	journal = {Materials Today: ProceedingsMaterials Today: Proceedings},
	volume = {30},
	year = {2020},
	month = {2020},
	pages = {833-837},
	isbn = {2214-7853},
	author = {Ouzani, Riadh and Alloui, Zinedinne}
}
@article {63090,
	title = {Numerical study on the optimal position of a pile for stabilization purpose of a slope},
	journal = {Geomechanics and EngineeringGeomechanics and Engineering},
	volume = {21},
	year = {2020},
	month = {2020},
	pages = {401-411},
	isbn = {2005-307X},
	author = {Boulfoul, Khalifa and Hammoud, Farid and Abbeche, Khelifa}
}
@article {62910,
	title = {Oncologic emergencies{\textemdash}the old, the new, and the deadly},
	journal = {Journal of intensive care medicineJournal of intensive care medicine},
	volume = {35},
	year = {2020},
	month = {2020},
	pages = {3-13},
	isbn = {0885-0666},
	author = {Thandra, Krishna and Salah, Zuhair and Chawla, Sanjay}
}
@article {63083,
	title = {Optimization of Combustion Efficiency Using a Fuel Composition Based on CH4 and/or H2},
	journal = {Russian Journal of Applied ChemistryRussian Journal of Applied Chemistry},
	volume = {93},
	year = {2020},
	month = {2020},
	pages = {1954-1959},
	isbn = {1608-3296},
	author = {Bouras, Fethi and Khaldi, Fouad}
}
@article {63153,
	title = {Optimization of the technical and environmental performance of the renewable energies. Case of the hybrid powerplant {\textquotedblleft}SPPI{\textquotedblright} of HassiR{\textquoteright}mel in the central highlands of Algeria},
	journal = {Environmental Engineering ResearchEnvironmental Engineering Research},
	volume = {26},
	year = {2020},
	month = {2020},
	isbn = {1226-1025},
	author = {Aouadj, Sarra and Zebirate, Soraya and Smail, Rachid and Saidi, Fethi and Aouadj, Sarra and Zebirate, Soraya and Smail, Rachid and Saidi, Fethi}
}
@article {62956,
	title = {Optimization study of the produced electric power by planar PEMFC-SCG},
	journal = {Renewable Energy FocusRenewable Energy Focus},
	volume = {35},
	year = {2020},
	month = {2020},
	pages = {72-83},
	isbn = {1755-0084},
	author = {Abdallah Mohammedi and Youcef Sahli and Hocine Ben Moussa}
}
@article {62977,
	title = {Performance analysis of ternary azeotropic mixtures in different vapor compression refrigeration cycles},
	journal = {International Journal of RefrigerationInternational Journal of Refrigeration},
	volume = {119},
	year = {2020},
	month = {2020},
	pages = {139-151},
	isbn = {0140-7007},
	author = {Maalem, Youcef and Fedali, Saida and Hakim MADANI and Tamene, Youcef}
}
@article {63113,
	title = {Performance evaluation of nanoscale halo dual-material double gate SiGe MOSFET using 2-D numerical simulation},
	journal = {Materials Today: ProceedingsMaterials Today: Proceedings},
	volume = {20},
	year = {2020},
	month = {2020},
	pages = {348-355},
	isbn = {2214-7853},
	author = {Bentrcia, Toufik and Fay{\c c}al DJEFFAL and Chahdi, Mohamed}
}
@article {63075,
	title = {Performance of mechanical filters used in general ventilation against nanoparticles},
	journal = {Science and Technology for the Built EnvironmentScience and Technology for the Built Environment},
	volume = {26},
	year = {2020},
	month = {2020},
	pages = {1387-1396},
	isbn = {2374-4731},
	author = {Brochot, Clothilde and Abdolghader, Pooya and Haghighat, Fariborz and Bahloul, Ali}
}
@article {63154,
	title = {Phenolics contents, xanthine oxidoreductase inhibitory potential, antibacterial and antioxidant activities of Cachrys libanotis L. root extracts},
	journal = {Journal of Drug Delivery and TherapeuticsJournal of Drug Delivery and Therapeutics},
	volume = {10},
	year = {2020},
	month = {2020},
	pages = {71-79},
	isbn = {2250-1177},
	author = {Aouachria, Sana and Boumerfeg, Sabah and Benslama, Abderrahim and Boussoualim, Naouel and Trabsa, Hayat and Baghiani, Abderrahmane}
}
@article {63000,
	title = {Phytochemical Profile, Antimicrobial and Antioxidant Activities of Cistus clusii Essential oil From Algeria},
	journal = {Current Bioactive CompoundsCurrent Bioactive Compounds},
	volume = {16},
	year = {2020},
	month = {2020},
	pages = {109-114},
	isbn = {1573-4072},
	author = {Khebri, Souad and Benkiki, Naima and Yahia, Mouloud and Haba, Hamada}
}
@proceedings {63133,
	title = {Post prognostic decision for predictive maintenance planning with remaining useful life uncertainty},
	journal = {2020 prognostics and health management conference (phm-besancon)},
	year = {2020},
	month = {2020},
	pages = {194-199},
	publisher = {IEEE},
	isbn = {1-72815-675-0},
	author = {Benaggoune, Khaled and Meraghni, Safa and Ma, Jian and LH Mouss and Zerhouni, Noureddine}
}
@proceedings {62917,
	title = {Power Maximization of a Variable Speed Wind Energy Conversion System Based on a Double Fed Induction Generator Connected to the Grid},
	journal = {2020 1st International Conference on Communications, Control Systems and Signal Processing (CCSSP)},
	year = {2020},
	month = {2020},
	pages = {1-6},
	publisher = {IEEE},
	isbn = {1-72815-835-4},
	author = {Slimane, Wissem and Benchouia, Mohamed Toufik and Said Drid and Benamor, Afaf and Golea, Amar}
}
@article {62976,
	title = {Prediction of thermodynamic properties of the ternary azeotropic mixtures},
	journal = {Fluid Phase EquilibriaFluid Phase Equilibria},
	volume = {517},
	year = {2020},
	month = {2020},
	pages = {112613},
	isbn = {0378-3812},
	author = {Maalem, Youcef and Zarfa, Abdnour and Tamene, Youcef and Fedali, Saida and Hakim MADANI}
}
@article {63027,
	title = {Preliminary hazard identification for risk assessment on a complex system for hydrogen production},
	journal = {International Journal of Hydrogen Energy,International Journal of Hydrogen Energy,},
	year = {2020},
	month = {2020},
	pages = {11855-11865},
	abstract = {Renewable power generation facilities are constantly expanding due to the expected depletion of fossil fuels and the increasingly demanding policy of pollution control. Having said that, hydrogen is one of the promising energy sources. That said, hydrogen chain safety is an unescapable parameter that should continuously coexist with the development of hydrogen domain. In this context, this article presents a contribution to the risk analysis and evaluation of a complex hydrogen production system {\textquoteright}EGA-9000{\textquoteright} at CIEMAT (Centre for Research on Energy, Environment and Technology - Madrid, Spain). The methodology followed in this study revolves around the risk analysis process through a FAST (Functional Analysis System Technique) functional analysis method and a HAZOP (HAZard and Operability) dysfunctional analysis method. The evaluation of the thirty-three scenarios identified by the risk analysis shows that the studied system is insecure. Indeed, five scenarios at an unacceptable level of risk. And it is noted that the risk of fire and explosion is the major risk for all scenarios studied. To this end, safety measures (recommendation) have been proposed based on the weaknesses detected by the risk analysis carried out.},
	author = {HADEF, H. and NEGROU, B. and GONZALEZ-AVUSO, T. and DJBABRA, M. and RAMADAN, M.}
}
@article {63149,
	title = {Prevalence, seasonality, and antimicrobial resistance of thermotolerant Campylobacter isolated from broiler farms and slaughterhouses in East Algeria},
	journal = {Veterinary WorldVeterinary World},
	volume = {13},
	year = {2020},
	month = {2020},
	pages = {1221},
	author = {Baali, Mohamed and Lounis, Mohamed and Al Amir, Hanan Laidouci and Ammar Ayachi and Hakem, Ahcen and Kassah-Laouar, Ahmed}
}
@proceedings {63021,
	title = {Privacy-aware Authentication Scheme for Electric Vehicle In-motion Wireless Charging},
	journal = {2020 International Symposium on Networks, Computers and Communications (ISNCC)},
	year = {2020},
	month = {2020},
	pages = {1-6},
	publisher = {IEEE},
	isbn = {1-72815-628-9},
	author = {Hamouid, Khaled and Adi, Kamel}
}
@article {63019,
	title = {A privacy-preserving cryptosystem for IoT E-healthcare},
	journal = {Information SciencesInformation Sciences},
	volume = {527},
	year = {2020},
	month = {2020},
	pages = {493-510},
	isbn = {0020-0255},
	author = {Hamza, Rafik and Yan, Zheng and Muhammad, Khan and Bellavista, Paolo and TITOUNA, Faiza}
}
@article {63067,
	title = {Problem-based collaborative learning groupware to improve computer programming skills},
	journal = {Behaviour \& Information TechnologyBehaviour \& Information Technology},
	year = {2020},
	month = {2020},
	pages = {1-20},
	isbn = {0144-929X},
	author = {Atef Chorfi and Djalal HEDJAZI and Sofiane Aouag and Djallel Eddine Boubiche}
}
@article {63092,
	title = {Proposal of a hybrid decision-making model for the alignment of the environmental performance},
	journal = {Management of Environmental Quality: An International JournalManagement of Environmental Quality: An International Journal},
	year = {2020},
	month = {2020},
	isbn = {1477-7835},
	author = {Wafa Boulagouas and Rachid Chaib and Djebabra, MEBAREK}
}
@proceedings {62911,
	title = {Proposed Ontology to Intelligent Road Network},
	journal = {2020 International Symposium on Advanced Electrical and Communication Technologies (ISAECT)},
	year = {2020},
	month = {2020},
	pages = {1-4},
	publisher = {IEEE},
	isbn = {1-66542-222-X},
	author = {Abdelmoutia Telli and Abdelouahab BELAZOUI}
}
@article {63089,
	title = {PROTECTIVE EFFECTS OF SELENIUM AND ZINC ON NICKEL CHLORIDE INDUCED REPRODUCTIVE TOXICITY IN WISTAR ALBINOS PREIMPLANTED RATS},
	journal = {Studia Universitatis Vasile Goldis Seria Stiintele Vietii (Life Sciences )Studia Universitatis Vasile Goldis Seria Stiintele Vietii (Life Sciences )},
	volume = {30},
	year = {2020},
	month = {2020},
	pages = {126 - 135},
	abstract = {: The aim of this study was to investigate that nickel chloride (NiCl2) induced reproductive toxicity in pre- implanted Wistar Rats and examined the possible protective effect of zinc chloride and selenium on plasma concentration of the hormones of 17 b etradiol (E2) and progesterone (prog); on the reproductive organ{\textquoteright}s histology and on development. Experimental results showed the subcutaneous (s.c) administration of Nicl2 to Wistar albino Rats induced a decrease in plasma concentration of E2 and prog in addition, disturbance in development parameters and structural damages to the histology of the reproductive organs. Conversely, Se and ZnCl2 dues to the antioxidants property, regulate the secretion of E2 and Prog hormones, prevent alterations in the reproductive organs and in development in preimplanted rates receiving NiCl2.},
	author = {BOULILA, Ismahene and Adjroud, Ounassa}
}
@inbook {62938,
	title = {Rate of penetration (ROP) prediction in oil drilling based on ensemble machine learning},
	booktitle = {ICT for an Inclusive World},
	year = {2020},
	month = {2020},
	pages = {537-549},
	publisher = {Springer},
	organization = {Springer},
	author = {Rezki, Djamil and Leila Hayet Mouss and Baaziz, Abdelkader and Rezki, Nafissa}
}
@proceedings {62988,
	title = {Real-time implementation of an optimized fractional sliding mode controller on the quanser-aero helicopter},
	journal = {2020 International Conference on Control, Automation and Diagnosis (ICCAD)},
	year = {2020},
	month = {2020},
	pages = {1-6},
	publisher = {IEEE},
	isbn = {1-72816-999-2},
	author = {Labdai, S and Chrifi-Alaoui, L and Drid, S and Delahoche, L and Bussy, P}
}
@proceedings {63105,
	title = {Regularized Length Changeable Extreme Learning Machine with Incremental Learning Enhancements for Remaining Useful Life Prediction of Aircraft Engines},
	journal = {2020 1st International Conference on Communications, Control Systems and Signal Processing (CCSSP)},
	year = {2020},
	month = {2020},
	pages = {358-363},
	publisher = {IEEE},
	isbn = {1-72815-835-4},
	author = {Berghout, Tarek and Leila Hayet Mouss and Ouahab KADRI and HADJIDJ, Nadjiha}
}
@article {63155,
	title = {Relation entre l{\textquoteright}{\'e}volution de la bourse de Fabricius et le poids du poulet de chair dans des {\'e}levages intensifs en Alg{\'e}rie},
	journal = {Livestock Research for Rural DevelopmentLivestock Research for Rural Development},
	volume = {32},
	year = {2020},
	month = {2020},
	author = {Alloui, N and Sellaoui, S and Bennoune, O and Ayachi, A}
}
@proceedings {63078,
	title = {Reverse logistics with disassembly, assembly, repair and substitution},
	journal = {2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)},
	year = {2020},
	month = {2020},
	pages = {108-112},
	publisher = {IEEE},
	isbn = {1-5386-7220-0},
	author = {Boutarfa, Youcef and SENOUSSI, Ahmed and BRAHIMI, Nadjib}
}
@article {63068,
	title = {Risk of Heavy Metals Accumulation in Agricultural Lands by Treated Wastewater as Source of Irrigation in the Province of Batna (East Algeria)},
	journal = {Int J Water Wastewater TreatInt J Water Wastewater Treat},
	volume = {6},
	year = {2020},
	month = {2020},
	author = {Chichoune, M and Souiher, N and Messaid, B}
}
@article {63071,
	title = {Robust nonlinear control via feedback linearization and Lyapunov theory for permanent magnet synchronous generator-based wind energy conversion system},
	journal = {Frontiers in EnergyFrontiers in Energy},
	volume = {14},
	year = {2020},
	month = {2020},
	pages = {180-191},
	isbn = {2095-1698},
	author = {Cheikh, Ridha and Menacer, Arezki and Chrifi-Alaoui, L and Said Drid}
}
@article {62980,
	title = {Robust wheel slip for vehicle anti-lock braking system with Fuzzy Sliding Mode Controller (FSMC)},
	journal = {Engineering, Technology \& Applied Science ResearchEngineering, Technology \& Applied Science Research},
	volume = {10},
	year = {2020},
	month = {2020},
	pages = {6368-6373},
	isbn = {1792-8036},
	author = {Latreche, Sadjia and Said Benaggoune}
}
@proceedings {63048,
	title = {Role of Material Gate Engineering in Improving Gate All Around Junctionless (GAAJL) MOSFET Reliability Against Hot-Carrier Effects},
	journal = {2020 32nd International Conference on Microelectronics (ICM)},
	year = {2020},
	month = {2020},
	pages = {1-4},
	publisher = {IEEE},
	isbn = {1-72819-664-7},
	author = {Ferhati, Hichem and Fay{\c c}al DJEFFAL and Bentrcia, Toufik}
}
@article {62940,
	title = {The Role of Physical Activities in improving the Psychological State, Reducing Stress and Anxiety Resulting from the Corona (COVID-19) Pandemic},
	journal = {Asian Journal of Advances in ResearchAsian Journal of Advances in Research},
	year = {2020},
	month = {2020},
	pages = {31-34},
	author = {RAFAHIYA, BOUCHAREB and HOUARI, SAIDIA}
}
@article {62918,
	title = {Second order sliding mode maximum power point tracking of wind turbine systems based on double fed induction generator},
	journal = {International Journal of System Assurance Engineering and ManagementInternational Journal of System Assurance Engineering and Management},
	volume = {11},
	year = {2020},
	month = {2020},
	pages = {716-727},
	isbn = {0976-4348},
	author = {Slimane, Wissem and Benchouia, MT and Golea, Amar and Sa{\"\i}d Drid}
}
@article {62999,
	title = {Seed germination and seedling establishment of Cherimoya (Annona Cherimola mill.) at different temperatures},
	year = {2020},
	month = {2020},
	author = {Kheloufi, A and Mansouri, LM and Khettache, H}
}
@article {63118,
	title = {Self-stabilizing Algorithm for Minimal $\alpha $-Dominating Set},
	journal = {arXiv preprint arXiv:2006.01311arXiv preprint arXiv:2006.01311},
	year = {2020},
	month = {2020},
	author = {Badreddine Benreguia and Hamouma Moumen}
}
@article {63081,
	title = {Sensorless Speed Control of IPMSM Using Sliding Mode Observer Based on Active Flux Concept},
	journal = {Journal homepage: http://iieta. org/journals/mmc_aJournal homepage: http://iieta. org/journals/mmc_a},
	volume = {93},
	year = {2020},
	month = {2020},
	pages = {1-9},
	author = {Boussekra, Fayza and Makouf, Abdessalam and Datta, Sagnik and Chattopadhyaya, Aveek and Chattopadhyay, Surajit and Das, Arabinda and Zeghba, O and Chakroune, S and Khodja, DE and Belhamdi, S}
}
@article {62892,
	title = {Septic{\'e}mie {\`a} Geotrichum Capitatum chez une patiente atteinte de leuc{\'e}mie lympho{\"\i}de aigue.},
	journal = {Revue Aurassienne du laboratoireRevue Aurassienne du laboratoire},
	year = {2020},
	month = {2020},
	pages = {104},
	author = {Zemmouri, H and Kassah-laouar, A}
}
@article {62942,
	title = {Seroprevalence of SARS-CoV-2 in Palestine: a cross-sectional seroepidemiological study},
	journal = {Available at SSRN 3680550Available at SSRN 3680550},
	year = {2020},
	month = {2020},
	author = {Qutob, Nouar and Awartani, Faisal and Salah, Zaidoun and Asia, Mohammad and Khader, Imad Abu and Herzallah, Khaled and Balqis, Nadeen and Sallam, Husam}
}
@proceedings {62936,
	title = {Service Quality Related to Customer Satisfaction with Umrah Worship Package Preparation at PT. Marco Tour and Travel Jakarta: Spearman{\textquoteright}s Correlation Coefficient},
	journal = {3rd International Conference on Vocational Higher Education (ICVHE 2018)},
	year = {2020},
	month = {2020},
	pages = {1-8},
	publisher = {Atlantis Press},
	isbn = {94-6252-947-7},
	author = {Ridha, Mohammad and Harris, Rana}
}
@article {62981,
	title = {Single valued neutrosophic mappings defined by single valued neutrosophic relations with applications},
	journal = {Neutrosophic Sets and SystemsNeutrosophic Sets and Systems},
	volume = {1},
	year = {2020},
	month = {2020},
	pages = {203-220},
	author = {Latreche, Abdelkrim and Barkat, Omar and Milles, Soheyb and Ismail, Farhan}
}
@article {63058,
	title = {SIRAT1: A real-Time indexing Arabic text editor based on the extraction of keywords},
	year = {2020},
	month = {2020},
	author = {Dilekh, Tahar and BENHARZALLAH, Saber and Mokeddem, Ayoub}
}
@article {62925,
	title = {Site selection for future industrial infrastructure in the province of Constantine (Algeria)},
	journal = {Geomatics, Landmanagement and LandscapeGeomatics, Landmanagement and Landscape},
	year = {2020},
	month = {2020},
	isbn = {2300-1496},
	author = {Sami, Guellouh and Kalla Mahdi and Abdelwahhab, Filali and Habibi Yahyaoui}
}
@article {63159,
	title = {Smart model for accurate estimation of solar radiation},
	journal = {Frontiers in EnergyFrontiers in Energy},
	volume = {14},
	year = {2020},
	month = {2020},
	pages = {383-399},
	isbn = {2095-1698},
	author = {Achour, Lazhar and Bouharkat, Malek and Ouarda Assas and Behar, Omar}
}
@article {62906,
	title = {Soil foundation and structure interaction effects on the estimating of fundamental period of instrumented buildings},
	year = {2020},
	month = {2020},
	author = {TORKIA, HAITEM and Toufik, Maalem and Noureddine, Lahbari}
}
@article {63140,
	title = {Spatial distribution of the groundwater quality using kriging and Co-kriging interpolations},
	journal = {Groundwater for Sustainable DevelopmentGroundwater for Sustainable Development},
	volume = {11},
	year = {2020},
	month = {2020},
	pages = {100473},
	isbn = {2352-801X},
	author = {Belkhiri, Lazhar and Tiri, Ammar and Mouni, Lotfi}
}
@article {63136,
	title = {Spatialization of water erosion using analytic hierarchy process (AHP) method in the high valley of the Medjerda, eastern Algeria},
	journal = {Journal of Water and Land DevelopmentJournal of Water and Land Development},
	year = {2020},
	month = {2020},
	isbn = {1429-7426},
	author = {Belloula, Moufida and Hadda DRIDI and Kalla, Mehdi}
}
@article {63039,
	title = {Spectrum harvesting for heterogeneous wireless networks integration},
	journal = {Wireless NetworksWireless Networks},
	volume = {26},
	year = {2020},
	month = {2020},
	pages = {431-447},
	isbn = {1572-8196},
	author = {Samir Gourdache and Azeddine Bilami and Kamel Barka}
}
@article {63085,
	title = {Stable and robust control strategy using interval-valued fuzzy systems},
	journal = {International Journal of AppliedInternational Journal of Applied},
	volume = {9},
	year = {2020},
	month = {2020},
	pages = {205-217},
	author = {Bounouara, Nadia and Ghanai, Mouna and Medjghou, Ali and Chafaa, Kheireddine}
}
@article {62896,
	title = {Staphylococcus aureus persistence properties associated with bovine mastitis and alternative therapeutic modalities},
	journal = {Journal of applied microbiologyJournal of applied microbiology},
	volume = {129},
	year = {2020},
	month = {2020},
	pages = {1102-1119},
	isbn = {1364-5072},
	author = {Zaatout, N and Ayachi, A and Kecha, M}
}
@proceedings {63146,
	title = {Static versus dynamic memory allocation: a comparison for linear algebra kernels},
	journal = {IMPACT 2020, in conjunction with HiPEAC 2020},
	year = {2020},
	month = {2020},
	author = {Baroudi, Toufik and Loechner, Vincent and Seghir, Rachid}
}
@article {63138,
	title = {Statistical modeling of annual maximum precipitation in Oued El Gourzi Watershed, Algeria},
	journal = {Applied Water ScienceApplied Water Science},
	volume = {10},
	year = {2020},
	month = {2020},
	pages = {1-8},
	isbn = {2190-5495},
	author = {Bella, Nassim and Hadda DRIDI and Mahdi KALLA}
}
@article {63101,
	title = {Structural behavior of pipelines buried in expansive soils under rainfall infiltration (Part I: transverse behavior)},
	journal = {Civil Engineering JournalCivil Engineering Journal},
	volume = {6},
	year = {2020},
	month = {2020},
	pages = {1822-1838},
	isbn = {2476-3055},
	author = {Bouatia, Mohammed and Demagh, Rafik and Derriche, Zohra}
}
@article {62957,
	title = {Structural behavior of pipelines buried in expansive soils under rainfall infiltration (Part I: transverse behavior)[J]},
	journal = {Civil engineering journalCivil Engineering Journal},
	volume = {6},
	year = {2020},
	month = {2020},
	pages = {1822-1838},
	author = {Mohammed, Bouatia and Rafik, Demagh and Zohra, Derriche}
}
@article {63093,
	title = {Structural, optical and morphological properties of zinc oxide (ZnO) nanosheets elaborated by hydrothermal method associated with microwave heating},
	journal = {Optoelectronics and Advanced Materials-Rapid CommunicationsOptoelectronics and Advanced Materials-Rapid Communications},
	volume = {14},
	year = {2020},
	month = {2020},
	pages = {433-437},
	isbn = {1842-6573},
	author = {Boukhanoufa, N and Rahmouni, S}
}
@article {63016,
	title = {Study of possible association between the C677T polymorphism of MTHFR, blood folate and vitamin B12 and total serum homocysteine in young patients with myocardial infarction in Aures region of Algeria},
	journal = {GSC Biological and Pharmaceutical SciencesGSC Biological and Pharmaceutical Sciences},
	volume = {12},
	year = {2020},
	month = {2020},
	pages = {015-024},
	isbn = {2581-3250},
	author = {Hayat, Djaara and Abdelali, Boussif and Kamilia, Belhadi and Yamina, Ouarhlent}
}
@article {63144,
	title = {Study of Si (100)-SiO2 Interface Trap Time Constant Distributions in Large Area Conventional MOSFETs-Comparison with Submicron Devices},
	journal = {ECS TransactionsECS Transactions},
	volume = {97},
	year = {2020},
	month = {2020},
	pages = {83},
	isbn = {1938-5862},
	author = {Bauza, Daniel and Guenifi, Naima}
}
@article {63169,
	title = {Study of the effect of waste glass fibers incorporation on the collapsible soil stability behavior},
	journal = {KnE EngineeringKnE Engineering},
	year = {2020},
	month = {2020},
	pages = {157-166},
	isbn = {2518-6841},
	author = {Abbeche, Khelifa and Panczer, G{\'e}rard and Belagraa, Larbi}
}
@article {63150,
	title = {Study of the subacute toxicity of a fungicide on rabbits (Batna region)},
	journal = {Journal of Advanced Pharmacy Education \& Research| Apr-JunJournal of Advanced Pharmacy Education \& Research| Apr-Jun},
	volume = {10},
	year = {2020},
	month = {2020},
	pages = {105},
	author = {Assia, Taguig and Soumaya, Boubsil and Ch{\'e}rif, Abdennour and Salah, Boulakoud Mohamed}
}
@article {63005,
	title = {Study on the durability of new construction materials based on mortar reinforced with date palm fibers wastes},
	journal = {Waste and Biomass ValorizationWaste and Biomass Valorization},
	volume = {11},
	year = {2020},
	month = {2020},
	pages = {3801-3809},
	isbn = {1877-265X},
	author = {Kareche, Abdelhak and Agoudjil, Boudjemaa and Haba, Bourhaneddine and Boudenne, Abderrahim}
}
@article {62913,
	title = {Sub-10 nm junctionless carbon nanotube field-effect transistors with improved performance},
	journal = {AEU-International Journal of Electronics and CommunicationsAEU-International Journal of Electronics and Communications},
	volume = {124},
	year = {2020},
	month = {2020},
	pages = {153354},
	isbn = {1434-8411},
	author = {Tamersit, Khalil}
}
@inbook {62908,
	title = {Suitability and Assessment of Surface Water for Irrigation Purpose},
	booktitle = {Water Chemistry},
	year = {2020},
	month = {2020},
	pages = {3},
	publisher = {IntechOpen},
	organization = {IntechOpen},
	isbn = {1-78985-558-6},
	author = {Tiri, Ammar and Belkhiri, Lazhar and Asma, Mammeri and Mouni, Lotfi}
}
@article {62950,
	title = {SUPPORT VECTOR MACHINES ALGORITHM FOR LAND COVER MAPPING USING GOOGLE EARTH ENGINE CASE STUDY SUB-WATERSHED OF OUED EL ARABE},
	journal = {PONTE International Journal of Science and ResearchPONTE International Journal of Science and Research},
	volume = {76},
	year = {2020},
	month = {2020},
	isbn = {0032-423X},
	author = {Nadjib, Chakali Ahmed and Salah, Zeraib and HACHI, Abderrahmane Ben Salem}
}
@article {63076,
	title = {Sustainable capacitated facility location/network design problem: a Non-dominated Sorting Genetic Algorithm based multiobjective approach},
	journal = {Annals of Operations ResearchAnnals of Operations Research},
	year = {2020},
	month = {2020},
	pages = {1-32},
	isbn = {1572-9338},
	author = {Brahami, Mustapha Anwar and Dahane, Mohammed and Souier, Mehdi}
}
@article {63109,
	title = {Swelling properties and lime stabilization of N{\textquoteright}Gaous expansive marls, NE Algeria},
	journal = {Journal of African Earth SciencesJournal of African Earth Sciences},
	volume = {170},
	year = {2020},
	month = {2020},
	pages = {103895},
	isbn = {1464-343X},
	author = {Benyahia, Sabah and Boumezbeur, Abderrahmane and Lamouri, Bachir and Fagel, Nathalie}
}
@article {62991,
	title = {Three Level Inverter Based Unified Power Flow Controller, ISSN 1755-6398},
	journal = {International Journal of Power ElectronicsInternational Journal of Power Electronics},
	volume = {volume 11},
	year = {2020},
	month = {2020},
	pages = {pp.195 - 210},
	abstract = {Unified power flow controller is a power electronics-based device utilised to improve transmission line capacity and control power flow transmitted by power transmission systems. This paper presents the application of the decoupled control strategy to control independently active and reactive power in the event of changes in the step points of the powers. Two types of controllers are used to handle the control strategy proposed: conventional PI regulator and fuzzy logic PI regulator. The fuzzy logic controller must have high performance to handle the problem of adjustment of power decoupling. Also, a three level neutral point controller inverter is used in both series and shunt parts of the UPFC to get multistep voltage wave and improve the power quality.},
	author = {Khoukha, Berrahal and Malik, Bouhentala Abd El and Ahmed, Bensalem}
}
@article {63104,
	title = {Three level inverter-based unified power flow controller},
	journal = {International Journal of Power ElectronicsInternational Journal of Power Electronics},
	volume = {11},
	year = {2020},
	month = {2020},
	pages = {195-210},
	isbn = {1756-638X},
	author = {Khoukha Berrahal and Abd El Malik Bouhentala and Ahmed Bensalem}
}
@article {62947,
	title = {TLBO Optimization Algorithm Based-Type2 Fuzzy Adaptive Filter for ECG Signals Denoising.},
	journal = {Traitement du SignalTraitement du Signal},
	volume = {37},
	year = {2020},
	month = {2020},
	isbn = {0765-0019},
	author = {Ouali, Mohammed Assam and Ghanai, Mouna and Chafaa, Kheireddine}
}
@article {62983,
	title = {Total phenolic contents and antioxidant properties of algerian Arbutus unedo L. extracts},
	journal = {Journal of Drug Delivery and TherapeuticsJournal of Drug Delivery and Therapeutics},
	volume = {10},
	year = {2020},
	month = {2020},
	pages = {159-168},
	isbn = {2250-1177},
	author = {Laouicha, Saliha and Senator, Abderrahmane and Kherbache, Abdallah and Bouriche, Hamama}
}
@proceedings {63151,
	title = {Towards architectural view-driven modernization},
	journal = {2020 International Conference on Advanced Aspects of Software Engineering (ICAASE)},
	year = {2020},
	month = {2020},
	pages = {1-6},
	publisher = {IEEE},
	isbn = {1-66542-231-9},
	author = {Sofiane Aouag and Salim Kadri and Djalal HEDJAZI}
}
@article {62954,
	title = {TP53 dysfunction in chronic lymphocytic leukemia: clinical relevance in the era of B-cell receptors and BCL-2 inhibitors},
	journal = {Expert Opinion on Investigational DrugsExpert Opinion on Investigational Drugs},
	volume = {29},
	year = {2020},
	month = {2020},
	pages = {869-880},
	isbn = {1354-3784},
	author = {Morabito, Fortunato and Gentile, Massimo and Monti, Paola and Recchia, Anna Grazia and Menichini, Paola and Skafi, Mamdouh and Atrash, Moien and De Luca, Giuseppa and Bossio, Sabrina and Al-Janazreh, Hamdi}
}
@article {63117,
	title = {Tracking covid-19 by tracking infectious trajectories},
	journal = {Ieee AccessIEEE Access},
	volume = {8},
	year = {2020},
	month = {2020},
	pages = {145242-145255},
	isbn = {2169-3536},
	author = {Badreddine Benreguia and Hamouma Moumen and Merzoug, Mohammed Amine}
}
@article {62932,
	title = {Two types of fuzzy logic controllers for the speed control of the doubly-fed induction machine},
	journal = {Advances in Electrical and Computer EngineeringAdvances in Electrical and Computer Engineering},
	volume = {20},
	year = {2020},
	month = {2020},
	pages = {65-74},
	isbn = {1582-7445},
	author = {Saidi, Abderazak and Naceri, Farid and Youb, Lamia and Cernat, Mihai and Pesquer, Luis Guasch}
}
@article {63033,
	title = {UAVs{\textquoteright}s efficient controlled mobility management for mobile heterogeneous wireless sensor networks},
	journal = {Journal of King Saud University-Computer and Information SciencesJournal of King Saud University-Computer and Information Sciences},
	year = {2020},
	month = {2020},
	isbn = {1319-1578},
	author = {Lyamine Guezouli and Kamel Barka and Asma Djehiche}
}
@article {63137,
	title = {User behaviour-based approach to define mobility devices needs of disabled person in Algeria: a questionnaire study},
	journal = {Disability and Rehabilitation: Assistive TechnologyDisability and Rehabilitation: Assistive Technology},
	year = {2020},
	month = {2020},
	pages = {1-9},
	isbn = {1748-3107},
	author = {Bellal, Salah Eddine and Leila Hayet Mouss and Sahnoun, M{\textquoteright}hammed and Messaadia, Mourad}
}
@article {63029,
	title = {Using Fuzzy-Improved Principal Component Analysis (PCA-IF) for Ranking of Major Accident Scenarios},
	journal = {Arabian Journal of Science and Engineering,Arabian Journal of Science and Engineering,},
	year = {2020},
	month = {2020},
	pages = {pp. 2235-2245.},
	abstract = {The industrial risk mapping is a topical problem in the field of risk management that attracts many researchers to develop risk matrices to ensure consultation between their actors. In this context, this paper aims to propose the principal component analysis (PCA) method as support for this consultation. Indeed, the use of PCA method is justified by its robustness for aggregate initial data associated with industrial risks as principal factors and ranking of this risk in terms of their criticalities in risk matrices. However, the aggregation of initial data on industrial risks by the main factors, in some cases, leads to inaccuracies which make it difficult to classify certain risks. This paper proposes two variants of PCA method to solve this inaccuracy and succeeds in classifying risks according to their respective criticalities, namely PCA-Improved (PCA-I) and PCA-I-Fuzzy (PCA-IF). The results come from the PCA application and its proposed variants (PCA-I and PCA-IF) on an example of accident scenarios ranking. We have established a scientific basis for the capitalization of mapping tool for consultation and decision support to industrial risk managers.},
	author = {HADEF, H. and M. Djebabra, M. Mouda and D. Belala,}
}
@article {63013,
	title = {Using fuzzy-improved principal component analysis (PCA-IF) for ranking of major accident scenarios},
	journal = {Arabian Journal for Science and EngineeringArabian Journal for Science and Engineering},
	volume = {45},
	year = {2020},
	month = {2020},
	pages = {2235-2245},
	isbn = {2191-4281},
	author = {Hadef Hefaidh and Djebabra M{\'e}barek}
}
@article {62887,
	title = {Using priced timed automata for the specification and verification of CSMA/CA in WSNs},
	journal = {International Journal of Information and Communication TechnologyInternational Journal of Information and Communication Technology},
	volume = {17},
	year = {2020},
	month = {2020},
	pages = {129-145},
	isbn = {1466-6642},
	author = {Zohra, Hmidi and KAHLOUL, Laid and BENHARZALLAH, Saber}
}
@article {63148,
	title = {Vacuum cleaner as a source of abiotic and biological air pollution in buildings: a review},
	journal = {Advances in Building Energy ResearchAdvances in Building Energy Research},
	year = {2020},
	month = {2020},
	pages = {1-12},
	isbn = {1751-2549},
	author = {Bahrami, Azad and Haghighat, Fariborz and Bahloul, Ali}
}
@article {62968,
	title = {Volumetric behavior of natural swelling soil on drying-wetting paths. Application to the Boumagueur marl-Algeria},
	journal = {Studia Geotechnica et MechanicaStudia Geotechnica et Mechanica},
	volume = {42},
	year = {2020},
	month = {2020},
	pages = {248-262},
	author = {Mehdi Mebarki and Kareche, Toufik and Benyahia, Sabah and Derfouf, Feth-Ellah Mounir and Abou-Bekr, Nabil and Taibi, Said}
}
@article {63062,
	title = {Weighted product Hardy space associated with operators},
	journal = {Frontiers of Mathematics in ChinaFrontiers of Mathematics in China},
	volume = {15},
	year = {2020},
	month = {2020},
	pages = {649-683},
	isbn = {1673-3576},
	author = {Deng, Qingquan and Guedjiba, Djalal Eddine}
}
@article {63114,
	title = {Xanthine Oxidase Inhibition, In Vitro Antioxidant Activity and Antibacterial Effect of the Aerial Part Extracts of Thymus pallidus Coss},
	journal = {Current Nutrition \& Food ScienceCurrent Nutrition \& Food Science},
	volume = {16},
	year = {2020},
	month = {2020},
	pages = {607-615},
	isbn = {1573-4013},
	author = {Benslama, Abderrahim and Boumerfeg, Sabah and Aouachria, Sana and Guemmaz, Thoraya and Arrar, Lekhmici and Khennouf, Seddik and Baghiani, Abderrahmene}
}
@article {61649,
	title = {EXPERIMENTAL INVESTIGATION OF THE CORROSION RESISTANCE OF Ni-Al2O3 COMPOSITE COATINGS OBTAINED BY ELECTRODEPOSITION},
	journal = {U.P.B. Sci. Bull., Series B, },
	volume = {82},
	number = {1},
	year = {2020},
	abstract = {
	This article aims to prepare Ni-Al2O3 composite coatings from a conventional electroplating process. The coatings development parameters taken into account for this study of the corrosion resistance of these coatings are: Al2O3 concentration, bath temperature and current. The experimental tests are carried out by two lost mass and polarization techniques. The objective of the work is to determine the influence of elaboration parameters on the corrosion resistance of NiAl2O3 composite coatings. The study carried out in this article has show

},
	url = {https://www.scientificbulletin.upb.ro/rev_docs_arhiva/fulla9c_658903.pdf},
	author = {Rezgui, Imane and Belloufi, Abderrahim and Mihi, Abdelkader}
}
@article {61470,
	title = {The first Prenatal Group B Streptococcus (GBS) Screening in Late Pregnancy in Algerian population (Northeast Algeria)},
	journal = {ACTA MICROBIOLOGICA HELLENICA},
	volume = {65},
	number = {3},
	year = {2020},
	abstract = {
	Group B Streptococcus (GBS) can cause severe pneumonia, sepsis and meningitis in neonates and represents one of the most prevalent causes of invasive neonatal infections. Prenatal screening and prenatal antibiotic prophylaxis can prevent maternal transmission of Streptococcus agalactiae during delivery. The objective of this study was to determine the maternal risk of maternal carriage of group B Streptococcus over time, to offer reliable epidemiological data to the health staff working at maternity Meriem Bouatoura, Batna (Northeast Algeria) or even all maternity hospitalsin Algeria. In this prospective study, vaginalspecimens(lower third) were collected from 150 pregnant women. The samples were cultured on 5\% sheep blood and Chromagar Orientation. The method of confirming the identification of GBS was he agglutination test using the PASTOREX{\textregistered} Strep Kit. The antibiotic susceptibility testing was performed using the Kirby Bauer method. A total of 150 patients were evaluated, on average in the 34th week of pregnancy. Fifteen patients were GBS positive, a percentage rate of 10\%. In conclusion, regular vaginal culture screening in the third trimester of pregnancy is warranted, as well as evaluation of risk factors and need for antibiotic administration to infants at risk.

},
	url = {https://acta.hms.org.gr/wp-content/uploads/2021/04/4.Issue-65-03_Belhadi.pdf},
	author = {Belhadi, Kamilia and Chayeb, Farouk Zohir and Djaara, Hayat}
}
@article {61609,
	title = {A Hybrid Neural Network for Detecting AtrioVentricular Block (AV B) in ECG Signal},
	year = {2020},
	abstract = {
	Biomedical domains are characterized by the presence of large amounts of high dimensional data and a lack of general theories to understand structural and functional components. Artificial Neural Networks (ANN) are computer-based expert systems that have proved to be useful in pattern recognition tasks. ANN can be used in different phases of the decisionmaking process, from classification to diagnostic procedures. In this work, we develop a method based on a hybrid ANN. This method uses three different feed forward type multilayer neural networks, with the ability to classify ECGs as normal or carrying atrioventricular block (AVB). A single output unit encodes the probability of AVB occurrences. A value between 0 and 0.05 being the desired output for a normal ECG, a value between 0.05 and 1 would infer an occurrence of an AVB. The results show that, this hybrid network has a good performance to detect AVBs. They show a sensibility of 98\% and a specificity of 92\%.

},
	url = {https://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.446.1335\&rep=rep1\&type=pdf},
	author = {Meghriche, Salama and Draa, Amer and Boulemden, Mohammed and Abada, Afnen}
}
@article {61679,
	title = {New Bioactive Molecules Isolated for the First Time from Hyoscyamus albus L. and their Mechanisms Underlying the Anticancer Effects},
	year = {2020},
	author = {Yahia, Massinissa and Benhouda, Afaf and Yahia, Mouloud and Haba, Hamada and Campos, Francisco and Benbia, Souhila and Rangel, Antonio}
}
@article {61589,
	title = {New Thresholding Technique in DCT Domain for Interference Mitigation in GNSS Receivers New Thresholding Technique in DCT Domain for Interference Mitigation in GNSS Receivers},
	year = {2020},
	author = {Khezzar, Zaki Aissam and Benzid, Redha and Saidi, Lamir}
}
@proceedings {61442,
	title = {OPTIMAL SHAPE REPRODUCTION OF AN INTERVERTEBRAL PROSTHESIS \&ldquo;COFLEX\&rdquo; FOR ADDITIVE MANUFACTURING},
	year = {2020},
	author = {Ameddah, Hacene and Mourad Brioua}
}
@proceedings {61545,
	title = {System of Systems Modelling: Recent work Review and a Path Forward},
	journal = {International Conference on Advanced Aspects of Software Engineering (ICAASE), 28-30 Nov},
	year = {2020},
	address = {Constantine, Algeria},
	url = {https://ieeexplore.ieee.org/document/9380106},
	author = {Sofiane Aouag and Salim Kadri and Djalal HEDJAZI}
}
@article {61637,
	title = {TLBO Optimization Algorithm Based-Type2 Fuzzy Adaptive Filter for ECG Signals Denoising TLBO Optimization Algorithm Based-Type2 Fuzzy Adaptive Filter for ECG Signals Denoising},
	year = {2020},
	author = {Ouali, Mohammed Assam and Ghanai, Mouna and Chafaa, Kheireddine}
}
@article {45238,
	title = {Adaptive direct power control for double fed induction generator used in wind turbine},
	journal = {International Journal of Electrical Power \& Energy Systems},
	volume = {114},
	year = {2020},
	pages = {105395},
	publisher = {Elsevier},
	abstract = {
	This papers deal with a new Adaptive Direct Power Control for Doubly-Fed Induction Generator of 1.5 MW. The main feature of the proposed strategy is based on the replacement of the fixed switching table by an adaptive one. The online update of the adaptive switching table depends on the reactive power variation and past switching sequences. The proposed adaptive direct power control is compared with Vector Control and Classical Direct Power Control. The robustness of the proposed control scheme against parameter, load and wind speed variations have done with success. The main performance of the Adaptive Direct Power Control strategy is the reduction of powers ripples, thus reduce of torque ripple on the shaft of the\&nbsp;turbine.

},
	isbn = {0142-0615},
	url = {https://www.sciencedirect.com/science/article/abs/pii/S0142061518326395},
	author = {Mazouz, Farida and Sebti Belkacem and Colak, Ilhami and Said Drid and Harbouche, Youcef}
}
@article {45235,
	title = {Direct torque control of dual star induction motor using a fuzzy-PSO hybrid approach},
	journal = {Applied Computing and Informatics},
	year = {2020},
	publisher = {Emerald Publishing Limited},
	abstract = {
	This paper presents the particle swarm optimization (PSO) algorithm in conjuction with the fuzzy logic method in order to achieve an optimized tuning of a proportional integral derivative controller (PID) in the DTC control loops of dual star induction motor (DSIM). The fuzzy controller is insensitive to parametric variations, however, with the PSO-based optimization approach we obtain a judicious choice of the gains to make the system more robust. According to Matlab simulation, the results demonstrate that the hybrid DTC of DSIM improves the speed loop response, ensures the system stability, reduces the steady state error and enhances the rising time. Moreover, with this controller, the disturbances do not affect the motor performances.

},
	isbn = {2634-1964},
	url = {https://www.emerald.com/insight/content/doi/10.1016/j.aci.2018.09.001/full/html?utm_source=rss\&utm_medium=feed\&utm_campaign=rss_journalLatest},
	author = {Ghoulemallah Boukhalfa and Sebti Belkacem and Abdesselem Chikhi and Said Benaggoune}
}
@article {45159,
	title = {Novel design of a fractional wavelet and its application to image denoising},
	journal = {Bulletin of Electrical Engineering and Informatics},
	volume = {9},
	number = {1},
	year = {2020},
	pages = {129-140},
	abstract = {
	This paper proposes a new wavelet family based on fractional calculus. The Haar wavelet is extended to fractional order by a generalization of the associated conventional low-pass filter using the fractional delay operator\&nbsp;Z-D. The high-pass fractional filter is then designed by a simple modulation of the low-pass filter. In contrast, the scaling and wavelet functions are constructed using the cascade Daubechies algorithm. The regularity and orthogonality of the obtained wavelet basis are ensured by a good choice of the fractional filter coefficients. An application example is presented to illustrate the effectiveness of the proposed method. Thanks to the flexibility of the fractional filters, the proposed approach provides better performance in term of image denoising.

},
	isbn = {2302-9285},
	url = {https://www.beei.org/index.php/EEI/article/view/1548},
	author = {Abderrahim, Lanani and Salama, Meghriche and Abdelbaki, Djouambi}
}
@article {45157,
	title = {A new parameterized logarithmic kernel function for linear optimization with a double barrier term yielding the best known iteration bound},
	journal = {Communications in Mathematics},
	volume = {28},
	number = {1},
	year = {2020},
	pages = {27-41},
	publisher = {University of Ostrava},
	abstract = {
	In this paper, we propose a large-update primal-dual interior point algorithm for linear optimization. The method is based on a new class of kernel functions which differs from the existing kernel functions in which it has a double barrier term. The investigation according to it yields the best known iteration bound O( √ n log(n) log( n ε )) for large-update algorithm with the special choice of its parameter m and thus improves the iteration bound obtained in Bai et al. [2] for large-update algorithm.

},
	isbn = {1804-1388},
	url = {https://dml.cz/handle/10338.dmlcz/148259},
	author = {Ayache, Benhadid and Khaled, Saoudi}
}
@article {45144,
	title = {Study on the durability of new construction materials based on mortar reinforced with date palm fibers wastes},
	journal = {Waste and Biomass Valorization},
	volume = {11},
	number = {7},
	year = {2020},
	pages = {3801-3809},
	publisher = {Springer},
	abstract = {
	The present work aims to investigate the feasibility to use date palm waste as reinforcement to improve durability and performance of concrete. Four formulations (0\&nbsp;wt\&nbsp;\%, 5\&nbsp;wt\&nbsp;\%, 10\&nbsp;wt\&nbsp;\% and 15\&nbsp;wt\&nbsp;\%) were prepared according to the date palm fibers weight contents. The performance of all these formulations was studied in terms of swelling, drying shrinkage, weight change, compressive strength and volume change. The investigations were performed by exposing the samples to various environments: immersion in water, drying, salts exposure and cyclic wetting/drying. The results revealed that mortar reinforced with date palm fibers offers better shrinkage prevention, and thus allows decreasing the cracking effect. Moreover, the composites prepared with high content of natural fibers showed better resistance against sulphuric acid attack and therefore better resistance to deterioration. A significant enhancement in mechanical behavior following alkali treatment was recorded. Finally, date palm fibers can mainly contribute for minimizing the deterioration of cement mortar composites following cyclic wetting and drying

},
	isbn = {1877-265X},
	url = {https://link.springer.com/article/10.1007/s12649-019-00669-y},
	author = {Kareche, Abdelhak and Agoudjil, Boudjemaa and Haba, Bourhaneddine and Boudenne, Abderrahim}
}
@article {38479,
	title = {Modelling the surface water quality of the Agrioune River in the north-east of Algeria by the PEGASE model},
	journal = {International Journal of River Basin Management},
	volume = {18},
	number = {4},
	year = {2020},
	pages = {477-490},
	publisher = {Taylor \& Francis},
	isbn = {1571-5124},
	author = {Merah, Ferhat and Boudoukha, Abderrahmane and Grard, Aline and Everbecq, Etienne and Magermans, Pol and Deli{\`e}ge, Jean Fran{\c c}ois}
}
@article {38477,
	title = {Experimental and numerical study of a solar collector using phase change material as heat storage},
	journal = {Journal of Energy Storage},
	volume = {27},
	year = {2020},
	pages = {101133},
	publisher = {Elsevier},
	isbn = {2352-152X},
	author = {Guerraiche, Djemaa and Bougriou, Cherif and Guerraiche, Khelifa and Valenzuela, Loreto and Driss, Zied}
}
@article {37818,
	title = {A hybrid algorithm for wave-front corrections applied to satellite-to-ground laser communication},
	journal = {Telkomnika},
	volume = {18},
	number = {3},
	year = {2020},
	pages = {1259-1267},
	publisher = {Ahmad Dahlan University},
	isbn = {1693-6930},
	author = {Al Gobi, Mohammed Senan and Benatia, Djamel and Bali, Mouadh}
}
