In this paper, a new MSM-UV-photodetector (PD) based on dual wide band-gap material (DM) engineering aspect is proposed to achieve high-performance self-powered device. Comprehensive analytical models for the proposed sensor photocurrent and the device properties are developed incorporating the impact of DM aspect on the device photoelectrical behavior. The obtained results are validated with the numerical data using commercial TCAD software. Our investigation demonstrates that the adopted design amendment modulates the electric field in the device, which provides the possibility to drive appropriate photo-generated carriers without an external applied voltage. This phenomenon suggests achieving the dual role of effective carriers’ separation and an efficient reduce of the dark current. Moreover, a new hybrid approach based on analytical modeling and Particle Swarm Optimization (PSO) is proposed to achieve improved photoelectric behavior at zero bias that can ensure favorable self-powered MSM-based UV-PD. It is found that the proposed design methodology has succeeded in identifying the optimized design that offers a self-powered device with high-responsivity (98 mA/W) and superior ION/IOFF ratio (480 dB). These results make the optimized MSM-UV-DM-PD suitable for providing low cost self-powered devices for high-performance optical communication and monitoring applications.

In this paper, graded channel doping (GCD) and junctionless paradigms are proposed as a new ways to improve the optical controlled field effect transistor (OCFET) and bridging the gap between the high responsivity and ultra-low power consumption. A careful mechanism study based on numerical investigation and a performance comparison between the proposed structure and both the conventional inversion mode (IM-OCFET) and the junctionless (JL-OCFET) designs is presented. It is found that the graded channel doping feature can efficiently improve the overall device optical and electrical performances. Moreover, the proposed design exhibits superior device figures of merit (FoMs) and provides ultra-sensitivity behavior as compared to both the conventional IM-OCFET and the JL-OCFET counterparts. Our investigation reveals also the outstanding capability of the proposed structure for offering the weak signal detection advantage that demonstrates the unique property of our phototransistor with GCD aspect. These characteristics not only underline the excellent switching behavior of the proposed design but also demonstrate the ability for overcoming the trade-off between the low cost and readily fabrication process in addition to ultrasensitive aspect with low power consumption. This makes the proposed GCD-JL-OCFET a potential alternative for developing low power communication systems.

In this paper, graded channel doping (GCD) and junctionless paradigms are proposed as a new ways to improve the optical controlled field effect transistor (OCFET) and bridging the gap between the high responsivity and ultra-low power consumption. A careful mechanism study based on numerical investigation and a performance comparison between the proposed structure and both the conventional inversion mode (IM-OCFET) and the junctionless (JL-OCFET) designs is presented. It is found that the graded channel doping feature can efficiently improve the overall device optical and electrical performances. Moreover, the proposed design exhibits superior device figures of merit (FoMs) and provides ultra-sensitivity behavior as compared to both the conventional IM-OCFET and the JL-OCFET counterparts. Our investigation reveals also the outstanding capability of the proposed structure for offering the weak signal detection advantage that demonstrates the unique property of our phototransistor with GCD aspect. These characteristics not only underline the excellent switching behavior of the proposed design but also demonstrate the ability for overcoming the trade-off between the low cost and readily fabrication process in addition to ultrasensitive aspect with low power consumption. This makes the proposed GCD-JL-OCFET a potential alternative for developing low power communication systems.

One of the main options to drive the cost of parabolic trough collectors (PTCs) technology down is to reduce the size of the solar field. This work proposes a novel receiver longitudinally undulated as a replacement for the conventional straight tube and investigates the effects on the size of absorbers, PTC modules and entire solar field. For this purpose, the developed method based on the similitude analysis should provide tools for drawing a comparison between the various designs of the absorber and should give useful measures of the scenario of their commissioning. Undulated absorber in service and without added supplementary mechanical components; the size of a solar collector field should reduce about ~29.5% consequence of the reduced size of the solar collector module and the absorber. The increase of the pressure drops through the novel absorber pipe should be re-balanced by the reduction in its size

One of the main options to drive the cost of parabolic trough collectors (PTCs) technology down is to reduce the size of the solar field. This work proposes a novel receiver longitudinally undulated as a replacement for the conventional straight tube and investigates the effects on the size of absorbers, PTC modules and entire solar field. For this purpose, the developed method based on the similitude analysis should provide tools for drawing a comparison between the various designs of the absorber and should give useful measures of the scenario of their commissioning. Undulated absorber in service and without added supplementary mechanical components; the size of a solar collector field should reduce about ~29.5% consequence of the reduced size of the solar collector module and the absorber. The increase of the pressure drops through the novel absorber pipe should be re-balanced by the reduction in its size.

One of the main options to drive the cost of parabolic trough collectors (PTCs) technology down is to reduce the size of the solar field. This work proposes a novel receiver longitudinally undulated as a replacement for the conventional straight tube and investigates the effects on the size of absorbers, PTC modules and entire solar field. For this purpose, the developed method based on the similitude analysis should provide tools for drawing a comparison between the various designs of the absorber and should give useful measures of the scenario of their commissioning. Undulated absorber in service and without added supplementary mechanical components; the size of a solar collector field should reduce about ~29.5% consequence of the reduced size of the solar collector module and the absorber. The increase of the pressure drops through the novel absorber pipe should be re-balanced by the reduction in its size.

One of the main options to drive the cost of parabolic trough collectors (PTCs) technology down is to reduce the size of the solar field. This work proposes a novel receiver longitudinally undulated as a replacement for the conventional straight tube and investigates the effects on the size of absorbers, PTC modules and entire solar field. For this purpose, the developed method based on the similitude analysis should provide tools for drawing a comparison between the various designs of the absorber and should give useful measures of the scenario of their commissioning. Undulated absorber in service and without added supplementary mechanical components; the size of a solar collector field should reduce about ~29.5% consequence of the reduced size of the solar collector module and the absorber. The increase of the pressure drops through the novel absorber pipe should be re-balanced by the reduction in its size

One of the main options to drive the cost of parabolic trough collectors (PTCs) technology down is to reduce the size of the solar field. This work proposes a novel receiver longitudinally undulated as a replacement for the conventional straight tube and investigates the effects on the size of absorbers, PTC modules and entire solar field. For this purpose, the developed method based on the similitude analysis should provide tools for drawing a comparison between the various designs of the absorber and should give useful measures of the scenario of their commissioning. Undulated absorber in service and without added supplementary mechanical components; the size of a solar collector field should reduce about ~29.5% consequence of the reduced size of the solar collector module and the absorber. The increase of the pressure drops through the novel absorber pipe should be re-balanced by the reduction in its size.

One of the main options to drive the cost of parabolic trough collectors (PTCs) technology down is to reduce the size of the solar field. This work proposes a novel receiver longitudinally undulated as a replacement for the conventional straight tube and investigates the effects on the size of absorbers, PTC modules and entire solar field. For this purpose, the developed method based on the similitude analysis should provide tools for drawing a comparison between the various designs of the absorber and should give useful measures of the scenario of their commissioning. Undulated absorber in service and without added supplementary mechanical components; the size of a solar collector field should reduce about ~29.5% consequence of the reduced size of the solar collector module and the absorber. The increase of the pressure drops through the novel absorber pipe should be re-balanced by the reduction in its size