Cet article est consacré à l’étude des performances de la génératrice asynchrone à cage double étoile (GASDE) en site isolé. Le système de commande est composé d’une GASDE raccordé à un bus continu et une charge en sortie de deux redresseurs à commande MLI. Une étude comparative entre la technique de commande conventionnelle et la commande adaptée basée sur l’introduction de la SVM-PI-flou et un nouvel estimateur de flux (flux virtuel statorique) afin d’améliorer la qualité d’énergie et d’atténuer les harmoniques du courant.

To enhance the robustness and dynamic performance of a self-excited induction generator (SEIG) used in a stand-alone wind energy system (WES), a virtual flux oriented control (VFOC) based on nonlinear super-twisting sliding mode control (STSMC) is adopted. STSMC is used to replace the conventional proportional-integral-Fuzzy Logic Controller (PI-FLC) of the inner current control loops. The combination of the proposed control strategy with space vector modulation (SVM) applied to a PWM rectifier brings many advantages such as reduction in harmonics, and precise and rapid tracking of the references. The performance of the proposed control technique (STSMC-VFOC-SVM) is verified through simulations and compared with the traditional technique (PI-FLC-VFOC-SVM). It shows that the proposed method improves the dynamics of the system with reduced current harmonics. In addition, the use of a virtual flux estimator instead of a phase-locked loop (PLL) eliminates the line voltage sensors and thus increases the reliability of the system.

Cet article est consacré à l’étude des performances de la génératrice asynchrone à cage double étoile (GASDE) en site isolé. Le système de commande est composé d’une GASDE raccordé à un bus continu et une charge en sortie de deux redresseurs à commande MLI. Une étude comparative entre la technique de commande conventionnelle et la commande adaptée basée sur l’introduction de la SVM-PI-flou et un nouvel estimateur de flux (flux virtuel statorique) afin d’améliorer la qualité d’énergie et d’atténuer les harmoniques du courant.

This article is devoted to the study of the performance of the double star cage asynchronous generator (GASDE) in isolated site. The control system consists of a GASDE connected to a dc bus and a load at the output of two PWM control rectifiers. A comparative study between the conventional control technique and the adapted control based on the introduction of the SVM- PI-fuzzy and a new flux estimator (virtual stator flux) in order to improve the quality of energy and to attenuate the harmonic of the current.

To enhance the robustness and dynamic performance of a self-excited induction generator (SEIG) used in a stand-alone wind energy system (WES), a virtual flux oriented control (VFOC) based on nonlinear super-twisting sliding mode control (STSMC) is adopted. STSMC is used to replace the conventional proportional-integral-Fuzzy Logic Controller (PI-FLC) of the inner current control loops. The combination of the proposed control strategy with space vector modulation (SVM) applied to a PWM rectifier brings many advantages such as reduction in harmonics, and precise and rapid tracking of the references. The performance of the proposed control technique (STSMC-VFOC-SVM) is verified through simulations and compared with the traditional technique (PI-FLC-VFOC-SVM). It shows that the proposed method improves the dynamics of the system with reduced current harmonics. In addition, the use of a virtual flux estimator instead of a phase-locked loop (PLL) eliminates the line voltage sensors and thus increases the reliability of the system.

Cet article est consacré à l’étude des performances de la génératrice asynchrone à cage double étoile (GASDE) en site isolé. Le système de commande est composé d’une GASDE raccordé à un bus continu et une charge en sortie de deux redresseurs à commande MLI. Une étude comparative entre la technique de commande conventionnelle et la commande adaptée basée sur l’introduction de la SVM-PI-flou et un nouvel estimateur de flux (flux virtuel statorique) afin d’améliorer la qualité d’énergie et d’atténuer les harmoniques du courant

This paper presents a novel direct rotor flux oriented control with online estimation of magnetizing current and magnetizing inductance applied to self-excited dual star induction generator equipping a wind turbine in remote sites. The induction generator is connected to nonlinear load through two PWM rectifiers. The fuzzy logic controller is used to ensure the DC bus voltage a constant value when changes in speed and load conditions. In this study, a performance comparison between the conventional approach and the novel approach is made. The proposed control strategy is validated by simulation in Matlab/Simulink.

This paper presents a novel direct rotor flux oriented control with online estimation of magnetizing current and magnetizing inductance applied to self-excited dual star induction generator equipping a wind turbine in remote sites. The induction generator is connected to nonlinear load through two PWM rectifiers. The fuzzy logic controller is used to ensure the DC bus voltage a constant value when changes in speed and load conditions. In this study, a performance comparison between the conventional approach and the novel approach is made. The proposed control strategy is validated by simulation in Matlab/Simulink.

Induction generator with direct field oriented control is preferred for high performance applications due to its excellent dynamic behavior. The accuracy for the dual star induction generator control in the remote area highly depends on estimating the undetectable machine parameter values, such as the magnetizing inductance and flux. The aim of this paper is to propose a novel direct rotor flux oriented control with online estimation of magnetizing current, which applied to stand alone dual star induction generator supplying a wind turbine in remote area. The induction generator is connected to nonlinear load through two PWM rectifiers. The results of the proposed technique based on the magnetizing inductance estimation that used to control of induction generator shows an importance to determine the rotor flux position.