2014
Zellagui M, Chaghi A.
Impact of RDG Location on IDMT Overcurrent Relay Operation and Coordination in MV Distribution System. ℡KOMNIKA - Indonesian Journal of Electrical Engineering℡KOMNIKA - Indonesian Journal of Electrical Engineering. 2014;12, No. 11 :7685-7594.
Zellagui M, Chaghi A.
Impact of RDG Location on IDMT Overcurrent Relay Operation and Coordination in MV Distribution System. ℡KOMNIKA - Indonesian Journal of Electrical Engineering℡KOMNIKA - Indonesian Journal of Electrical Engineering. 2014;12, No. 11 :7685-7594.
Zellagui M, Benabbas A, Chaghi A.
Impact of Static Var Compensator Devices (TCR and TSC) on Distance Relay Setting in 400 kV Algerian Transmission Line. Revue des Sciences et de la Technologie (RST), publié par Université de BatnaRevue des Sciences et de la Technologie (RST), publié par Université de Batna. 2014;5, No. 1 :32-42.
Zellagui M, Benabbas A, Chaghi A.
Impact of Static Var Compensator Devices (TCR and TSC) on Distance Relay Setting in 400 kV Algerian Transmission Line. Revue des Sciences et de la Technologie (RST), publié par Université de BatnaRevue des Sciences et de la Technologie (RST), publié par Université de Batna. 2014;5, No. 1 :32-42.
Zellagui M, Benabbas A, Chaghi A.
Impact of Static Var Compensator Devices (TCR and TSC) on Distance Relay Setting in 400 kV Algerian Transmission Line. Revue des Sciences et de la Technologie (RST), publié par Université de BatnaRevue des Sciences et de la Technologie (RST), publié par Université de Batna. 2014;5, No. 1 :32-42.
LAHBARI M, BENMOUSSA H.
Impact of the Cut Form on the Drying Behavior without Pretreatment of Carrots in a Convective Dryer. International Review of Mechanical Engineering (IREME)International Review of Mechanical Engineering (IREME). 2014;8 :pp. 162-167.
LAHBARI M, BENMOUSSA H.
Impact of the Cut Form on the Drying Behavior without Pretreatment of Carrots in a Convective Dryer. International Review of Mechanical Engineering (IREME)International Review of Mechanical Engineering (IREME). 2014;8 :pp. 162-167.
Abdedaim S, Betka A, Drid S, Becherif M.
Implementation of MRAC controller of a DFIG based variable speed grid connected wind turbine. Energy Conversion and Management, ElsiverEnergy Conversion and Management, Elsiver. 2014;79 :281–288.
Abdedaim S, Betka A, Drid S, Becherif M.
Implementation of MRAC controller of a DFIG based variable speed grid connected wind turbine. Energy Conversion and Management, ElsiverEnergy Conversion and Management, Elsiver. 2014;79 :281–288.
Abdedaim S, Betka A, Drid S, Becherif M.
Implementation of MRAC controller of a DFIG based variable speed grid connected wind turbine. Energy Conversion and Management, ElsiverEnergy Conversion and Management, Elsiver. 2014;79 :281–288.
Abdedaim S, Betka A, Drid S, Becherif M.
Implementation of MRAC controller of a DFIG based variable speed grid connected wind turbine. Energy Conversion and Management, ElsiverEnergy Conversion and Management, Elsiver. 2014;79 :281–288.
Mawloud T, Djamel MM, Samia A.
An implementation tool for the expertise model using CommonKADS methodology. The Sixth International Conference on Information, Process, and Knowledge Management, eKNOW. 2014.
Mawloud T, Djamel MM, Samia A.
An implementation tool for the expertise model using CommonKADS methodology. The Sixth International Conference on Information, Process, and Knowledge Management, eKNOW. 2014.
Mawloud T, Djamel MM, Samia A.
An implementation tool for the expertise model using CommonKADS methodology. The Sixth International Conference on Information, Process, and Knowledge Management, eKNOW. 2014.
Fouad DJAIZ, Ali ATHAMENA, Malika ATHAMENA.
Importance des ressources hydriques et leurs impacts sur le développement durable dans le bassin de Timgad (Algérie nord orientale), ISSN 2170-1318,Décembre 2014. Journal of Arid And Environment (AJAE)Journal of Arid And Environment (AJAE). 2014;vol. 4 :pp 78-87.
AbstractLocated in the Aures mountains Foum Toub is characterized by an annual average rainfall of 800mm. The hydrology subordinate to the terrain is the direct consequence of surface waters and of snow melting from the heights of Chelia Mountain. The aim of the implantation of the Foum Toub backwater is to minimize the siltation phenomenon at the upstream of the Koudiate El Mdaour dam, to regularize the Rebaa creek flow which runs from south to north and to contribute to the irrigation of the Foum Toub plain. This study puts the emphasis on the mobilization of surface water resources, a policy of the Ministry of Agriculture and Rural Development with a view to rationalize the use and planning of this vital factor, i.e. water. The site selected for the construction of this structure is characterized by a waterproof marly substratum, favourable for implanting the dike and the basin. The clay-silty-gravelly material furniture localized in the depressions as well as sandstones are used as areas for the construction materials of this structure. Stability is one of the most important parameters to take into account for the choice of the site, so as to avoid any problem linked to the withdrawal-swelling phenomena on the banks of creek. However, the sliding possibility, however weak it is, can be generated on the left bank of the creek within deposit and recent silt. The choice of the site for the implantation of this hydraulic structure remains subject to laboratory tests.
Fouad DJAIZ, Ali ATHAMENA, Malika ATHAMENA.
Importance des ressources hydriques et leurs impacts sur le développement durable dans le bassin de Timgad (Algérie nord orientale), ISSN 2170-1318,Décembre 2014. Journal of Arid And Environment (AJAE)Journal of Arid And Environment (AJAE). 2014;vol. 4 :pp 78-87.
AbstractLocated in the Aures mountains Foum Toub is characterized by an annual average rainfall of 800mm. The hydrology subordinate to the terrain is the direct consequence of surface waters and of snow melting from the heights of Chelia Mountain. The aim of the implantation of the Foum Toub backwater is to minimize the siltation phenomenon at the upstream of the Koudiate El Mdaour dam, to regularize the Rebaa creek flow which runs from south to north and to contribute to the irrigation of the Foum Toub plain. This study puts the emphasis on the mobilization of surface water resources, a policy of the Ministry of Agriculture and Rural Development with a view to rationalize the use and planning of this vital factor, i.e. water. The site selected for the construction of this structure is characterized by a waterproof marly substratum, favourable for implanting the dike and the basin. The clay-silty-gravelly material furniture localized in the depressions as well as sandstones are used as areas for the construction materials of this structure. Stability is one of the most important parameters to take into account for the choice of the site, so as to avoid any problem linked to the withdrawal-swelling phenomena on the banks of creek. However, the sliding possibility, however weak it is, can be generated on the left bank of the creek within deposit and recent silt. The choice of the site for the implantation of this hydraulic structure remains subject to laboratory tests.
Fouad DJAIZ, Ali ATHAMENA, Malika ATHAMENA.
Importance des ressources hydriques et leurs impacts sur le développement durable dans le bassin de Timgad (Algérie nord orientale), ISSN 2170-1318,Décembre 2014. Journal of Arid And Environment (AJAE)Journal of Arid And Environment (AJAE). 2014;vol. 4 :pp 78-87.
AbstractLocated in the Aures mountains Foum Toub is characterized by an annual average rainfall of 800mm. The hydrology subordinate to the terrain is the direct consequence of surface waters and of snow melting from the heights of Chelia Mountain. The aim of the implantation of the Foum Toub backwater is to minimize the siltation phenomenon at the upstream of the Koudiate El Mdaour dam, to regularize the Rebaa creek flow which runs from south to north and to contribute to the irrigation of the Foum Toub plain. This study puts the emphasis on the mobilization of surface water resources, a policy of the Ministry of Agriculture and Rural Development with a view to rationalize the use and planning of this vital factor, i.e. water. The site selected for the construction of this structure is characterized by a waterproof marly substratum, favourable for implanting the dike and the basin. The clay-silty-gravelly material furniture localized in the depressions as well as sandstones are used as areas for the construction materials of this structure. Stability is one of the most important parameters to take into account for the choice of the site, so as to avoid any problem linked to the withdrawal-swelling phenomena on the banks of creek. However, the sliding possibility, however weak it is, can be generated on the left bank of the creek within deposit and recent silt. The choice of the site for the implantation of this hydraulic structure remains subject to laboratory tests.
Bendaas I, Naceri F, Belkacem S.
Improving Asynchronous Motor Speed and Flux Loop Control by Using Hybrid Fuzzy-SMC Controllers. International Journal of Automation and ComputingInternational Journal of Automation and Computing. 2014;11 :361-367.