Citation:
Abstract:
Purpose The increasing complexity of industrial systems is at the heart of the development of many fault diagnosis methods. The artificial neural networks (ANNs), which are part of these methods, are widely used in fault diagnosis due to their flexibility and diversification which makes them one of the most appropriate fault diagnosis methods. The purpose of this paper is to detect and locate in real time any parameter deviations that can affect the operation of the blowout preventer (BOP) system using ANNs. Design/methodology/approach The starting data are extracted from the tables of the HAZOP (HAZard and OPerability) method where the deviations of the parameters of normal BOP operating (pressure, flow, level and temperature) are associated with an initial rule base for establishing cause and effect of relationships between the causes of deviations and their consequences; these data are used as a database for the neural network. Three ANNs were used, the multi-layer perceptron network (MLPN), radial basis functions network (RBFN) and generalized regression neural networks (GRNN). These models were trained and tested, then, their comparative performances were presented. The respective performances of these models are highlighted following their application to the BOP system. Findings The performances of the models are evaluated using determination coefficient (R2), root mean square error (RMSE) and mean absolute error (MAE) statistics and time execution. The results of this study show that the RMSE, MAE and R2 values of the GRNN model are better than those corresponding to the RBFN and MLPN models. The GRNN model can be applied with better performance, to establish a diagnostic model that can detect and to identify the different causes of deviations in the parameters of the BOP system. Originality/value The performance of the trained network is found to be satisfactory for the real-time fault diagnosis. Therefore, future studies on modeling the BOP system with soft computing techniques can be concentrated on the ANNs. Consequently, with the use of these techniques, the performance of the BOP system can be ensured performing only a limited number of monitoring operations, thus saving engineering effort, time and funds.