Citation:
Abstract:
Heat transfer by convection is widely used in many engineering applications such as in heat exchangers, combustion devices or gas processing. In Buildings, the use of rough surfaces allows enhancing heat transfer rates. Practically, in this study, a rough surface is obtained by using protuberances on the vertical left wall. In this perspective, the originality of this research is to study the influence of the protuberance geometric shapes on the heat transfer using 2D numerical simulations as a tool investigation. The homotopic transformation is used to reach a flat plate. The system of equations with the boundary conditions is solved using the finite volume method. A simple algorithm is chosen for the integration of algebraic equations. The governing equations are figured out using ANSYS FLUENT commercial software with SIMPLE algorithm in order to solve pressure-velocity coupling. The numerical simulations have been performed for different shapes of the protuberances (battlement, triangular and sinusoidal). The boundary conditions are based on a uniform heat flux applied to the vertical wall. On the other hand, the horizontal walls are subject to the adiabatic condition. It can be noticed that the effect of the wavy geometry induces a noticeable improvement of the heat transfer rate compared to an enclosure without protuberances. It can also conclude that the wavy configuration exhibits a Nusselt average slightly higher than that of the square cavity, particularly the triangular configuration, by approximately 20%.