This paper presents the second-order sliding mode controller (SOSMC) of a micro-positioning stage piezoelectric model actuator (PEA), where the C-H model parameters are adopted to describe the hysteresis behavior and identified through particle swarm optimization. In this technique, two control algorithms are developed. The first one is the so-called twisting algorithm (TA). The control appears explicitly in the second surface derivative, and in a discontinuous control action that ensures a sliding regime mode. The second one, the super twisting algorithms (STA) has been developed and analyzed for systems. The use of both algorithms gives a significant reduction in chattering as compared to the standard sliding mode control. It is shown that the STA case offers better performances than TA. Simulation results are presented to demonstrate the advantage of SOSMC over SMC.

In this work, the modeling and the sliding mode control of a self-excited asynchronous generator integrated in a wind energy conversion system is studied. The dc-link voltage and frequency output by the wind turbine depend on the wind intensity applied to the turbine and load. The goal of the study is to increase energy quality and to achieve a stabilization of dc-link voltage and frequency values based on sliding mode control. This method offers stability and robustness against external disturbances. However, this method is based in the power converter to improve the excellent dynamic of wind energy conversion system to meet the connection to the main grid. The simulation results show the efficiency and reliability of the proposed control method.

The Mexa and Bougous dams were built to control river floods and supply crop-irrigation and drinking water. This study aimed to characterize the hydrogeochemical state in the region containing the dams, which influences the quality of the waters and thus their suitability for agricultural use, given the extent of the river networks that naturally transport sediments and pollutants into the reservoirs via streams. Thus, some physicochemical and organic parameters, including electrical conductivity, calcium, magnesium, sodium, potassium, chloride, bicarbonate, sulfate, biological oxygen demand, nitrite, ammonium, and phosphate, were used as benchmarks to examine the stiffness of the water pollution. Sampling was carried out during May and September of 2011 and 2012. The obtained results showed that, according to the Stiff diagram, the dominant hydrogeochemical facies is calcium bicarbonate in waters that do not have calcium levels in excess of 3 meq/l and bicarbonate levels in excess of 2.4 meq/l. The organic pollution index disclosed that the waters have evolved from a moderate to a high degree of organic pollution due to the accumulation of pollutants and nutrients from waste disposal and fertilizers. The samples fell into the C2-S1 class in the Richards diagram; this implies that the waters are suitable for plants that are salt tolerant, but that the use of these waters can cause problems for clay soils. However, in the long term, irrigation with the dam waters may pose difficulties for agriculture due to the resulting increase in the electrical conductivity of the soil. This study concludes that water salinity and alkalinity affect crop suitability, meaning that the temporal monitoring of water quality is needed to avoid adverse consequences for crop production.

The relative scarcity of water resources in Algeria and their unequal distribution induce a rational use of available resources. The Zana-Gadaïne plain appears as an exemplary case study, where the difficulties posed by the problem of crop water needs versus the availability of water resources appear. This article, based on field surveys and in-situ measurements, aims to identify the pressure of irrigation on water resources and the optimization of their use in an agricultural area, where irrigated agriculture represents 85% of the water consumption of the Zana-Gadaïne plain. The piezometric study in correlation with hydrogeological data reveals that groundwater resources are limited, aggravated by wastage resulting in a consequent drawdown of 24 meters over 11 years. The analysis of interannual climate variability has enabled us to draw rainfall maps characteristic of the evolution of rainfall over the past decades where we observe a net deficit in precipitation. We calculated the evapotranspiration and the requirements in irrigation water for each crop in order to compare them with the available hydric resources and the establishment of irrigation schedules for the principal irrigated crops. The analysis of interannual climate variability has enabled us to draw rainfall maps characteristic of the evolution of rainfall over the past decades where we observe a net deficit in precipitation. We calculated the evapotranspiration and the requirements in irrigation water for each crop in order to compare them with the available hydric resources and the establishment of irrigation schedules for the principal irrigated crops.

The phytochemical profile obtained from LC-ESI-MS/MS analysis of then-butanol extract (BEHL) from the North African endemic plantHyacinthoides lingulata (Poir.) Rothm. brought about the identification of ten glycosylated derivatives of apigenin and luteolin flavones. For the same plant extract,in vitro anti-inflammatory (hypotonic induced hemolysis and heat induced haemolysis assay) and antioxidant (DPPH andβ-Carotene) activities were evaluated observing high inflammatory inhibition by protecting membrane stability of erythrocyte in both heat (84.70 ± 0.24%) and hypotonic induced hemolysis (79.45 ± 0.12%). A remarkable hemostatic effect was also established by measuring the coagulation time (15.95 ± 1.05 s at a dose of 1 mg/mL) of decalcified plasma related to its phytochemical content. It is the first report on combined chemical components and biological evaluation of this specific plant.

β-lactams and colistin resistance in Enterobacterales is a global public health issue. In this study we aimed to investigate the occurrence and genetic determinants of Extended-Spectrum β-lactamases, carbapenemases and mcr-encoding-genes in Enterobacterales isolates recovered from the migratory bird species Ciconia ciconia in an Algerian city. A total of 62 faecal samples from white storks were collected. Samples were then subjected to selective isolation of β-lactams and colistin-resistant-Enterobacterales. The representative colonies were identified using Matrix-Assisted Laser Desorption-Ionisation Time-of-Flight Mass Spectrometry. Susceptibility testing was performed using the disk-diffusion method. ESBL, carbapenemases, and colistin resistance determinants were searched for by PCR and sequencing. The clonality relationships of the obtained isolates were investigated by multilocus sequence typing assays. Mating experiments were carried out to evaluate the transferability of the carbapenemase and mcr-genes. Forty-two isolates were identified as follows: Escherichia coli (n = 33), Klebsiella pneumoniae (n = 4), Proteus mirabilis (n = 4) and Citrobacter freundii (n = 1). Molecular analysis showed that twelve isolates carried the bla_ESBL genes alone, fifteen E. coli isolates were positive for the bla_OXA-48 gene, six isolates were NDM-5-carriers (two P. mirabilis, two K. pneumoniae and two E. coli) and eight E. coli strains were positive for the mcr-1 gene. MLST results showed a high clonal diversity, where NDM-5-producing strains were assigned to two sequence types (ST167 for E. coli and ST198 for K. pneumoniae), whereas the mcr-1 positive E. coli isolates belonged to ST58, ST224, ST453, ST1286, ST2973, ST5542, ST9815 and the international high-risk resistant lineage ST101. To the best of our knowledge, this is the first report of bla_NDM-5 gene in white storks and also the first describing the mcr-1 gene in white storks in Algeria. This study underlines the important role of migratory white storks as carriers of high-level drug-resistant bacteria, allowing their possible implication as indicators and sentinels for antimicrobial resistance surveillance.

This paper presents the development of a multi-coil eddy current (EC) sensor that uses an axial rotating magnetic field for the measurement of electrical resistance to determine the electrical conductivity tensor of stratified carbon fiber reinforced polymer (CFRP) materials. The sensor consists of an identical planar racetrack multi-coil, excited by two-phase sinusoidal current sources that are 90° apart in phase to generate an axial rotating magnetic field and eliminate the need for mechanical rotation. Each sensor's coil's resistance variation is measured using a developed experimental prototype unit and computed using a 3D finite element method (FEM) based on the (A, V–A) formulation. The inverse problem technique that minimizes the difference between the calculated and measured resistances is then used to identify the electrical conductivity tensor components using the particle swarm optimization (PSO) algorithm. The comparison between the computed resistances and the measured ones shows an excellent concordance.

Strengthening production plants and process control functions contribute to a global improvement of manufacturing systems because of their cross-functional characteristics in the industry. Companies established various innovative and operational strategies; there is increasing competitiveness among them and increasing companies’ value. Machine learning (ML) techniques become an intelligent enticing option to address industrial issues in the current manufacturing sector since the emergence of Industry 4.0 and the extensive integration of paradigms such as big data and high computational power. Implementing a system able to identify faults early to avoid critical situations in the production line and its environment is crucial. Therefore, powerful machine learning algorithms are performed for fault diagnosis, real-time data classification, and predicting the state of functioning of the production line. Random forests proved to be a better classifier with an accuracy of 97%, compared to the SVM model’s accuracy which is 94.18%. However, the K-NN model’s accuracy is about 93.83%. An accuracy of 80.25% is achieved by the logistic regression model. About 83.73% is obtained by the decision tree’s model. The excellent experimental results reached on the random forest model demonstrated the merits of this implementation in the production performance, ensuring predictive maintenance and avoiding wasting energy.

In the context of the industrial process safety, the domino effect has become a topical issue for scientists and managers of companies given the diversity of factors that contributed to the aggravation of this phenomenon such as; proximity to industrial facilities, transport networks, development of industrial complexes, storage of hazardous substances and population growth. The purpose of this article is the MICDE method (Method of Identification and Characterization of Domino Effects) application on industrial zone of LPG storage in SONATRACH-Algeria Group for analyzes the domino effects caused by a major industrial accident.

Our study is adopted on the MICDE method which constitutes an aid in the integration of the domino effects problem in hazard studies and safety studies. In our application, it aims to formalize the points relating to the domino effects due to the BLEVE (Boiling Liquid Expanding Vapor Explosion) phenomenon of an LPG storage sphere.

The results obtained show that the hazardous equipment in the vicinity is seriously affected by the thermal and overpressure effect of the main accident, and may be seats in a new accident. The MICDE method is a promising method can be applied in several fields since it studies the phenomenon. This method facilitates decision-making in the prevention of domino effects for the sustainability facilities

Sebkha soils are defined as problem soils located in arid, semi-arid, and coastal areas. Generally, they are fine soil, composed of silt, sand, and clay, which are cemented by different salts (e.g., halite, gypsum, and calcite). In nature, sebkha saline soils are exposed to different drying and wetting (D-W) cycles. However, these cycles have a significant effect on the mechanical behavior of these soils. This study aims to characterize the chemical, mineralogical, and geotechnical properties of sebkha soil using an experimental approach. We focus on the effects of D-W cycles on the unconfined compressive strength (UCS) and salinity of sebkha soils from Ain M'Lila, Algeria. In addition, these D-W cycles were applied to the samples dried in the open air to achieve the targeted water content (water content values of 7%, 11.4%, and 13%). The results obtained show that the UCS increases with decrease in water content and decreases with an increase in the number of D-W cycles. In addition, these cycles affect the salinity of the sebkha soil. Indeed, a significant decrease in soil salinity was recorded with an increase in the number of D-W cycles. Finally, a relationship was found between the salinity of the soil and UCS. The latter decreases with a decrease in soil salinity; this relationship becomes very significant for low water content values of 7% or less.

Antibiotic-resistant bacteria can leave hospitals and therefore contaminate the environment and, most likely, humans and animals, through different routes, among which wastewater discharge is of great importance. This study aims to assess the possible role of hospital sewage as reservoir and dissemination pathway of carbapenem-resistant Gram-negative bacilli (GNB). Carbapenem-resistant GNB were selectively isolated from wastewater collected from a public hospital in Batna, Algeria. Species identification was carried out using matrix-assisted laser desorption and ionization time-of-flight mass spectrometry, and antibiotic susceptibility was evaluated by the disc diffusion method. β-Lactamase production was investigated phenotypically using the double-disk synergy assay and the modified CarbaNP test, then the molecular mechanisms of β-lactam-resistance were studied by PCR and sequencing. Ten Enterobacteriaceae and 14 glucose-nonfermenting GNB isolates were obtained. All Enterobacteriaceae isolates were positive for OXA-48 and TEM-1D β-lactamases, where seven of them coproduced an extended-spectrum β-lactamase. VIM-2 carbapenemase was detected in six glucose-nonfermenting GNB isolates. However, three Pseudomonas aeruginosa, one Comamonas jiangduensis and one Acinetobacter baumannii isolates were positive for VIM-4 variant. In addition, NDM-1 enzyme was detected in four A. baumannii isolates. Our findings highlight the potential impact of hospital wastewater in the spread of drug resistance mechanisms outside of hospitals.

Energy efficiency and ratio performance are two key parameters for the analysis of the performance of photovoltaic (PV) modules. The present paper focusses on the assessment of the efficiency of four different photovoltaic module technologies based on energy efficiency and ratio performance. These PV modules were installed at the Applied Research Unit in Renewable Energy (URAER) in Algeria and were used to provide experimental data to help local and international economical actors with performance enhancement and optimal choice of different technologies subject to arid outdoor conditions. The modules studied in this paper are: two thin-film modules of copper indium selenide (CIS), hetero-junction with intrinsic thin-layer silicon (HIT) and two crystalline silicon modules (polycrystalline (poly-Si), monocrystalline (mono-Si)). These technologies were initially characterized using a DC regulator based on their measured I-V characteristics under the same outdoor climate conditions as the location where the monitoring of the electrical energy produced from each PV module was carried out. The DC regulator allows for extracting the maximum electrical power. At the same time, the measurements of the solar radiation and temperature were obtained from a pyranometer type Kipp & ZonenTM CMP21 and a Pt-100 temperature sensor (Kipp & Zonen, Delft, Netherlands). These measurements were performed from July 2020 to June 2021. In this work, the monthly average performance parameters such as energy efficiency are given and analyzed. The average efficiency of the modules over 12 months was evaluated at 4.74%, 7.65%, 9.13% and 10.27% for the HIT, CIS, mono-Si and poly-Si modules, respectively. The calculated percentage deviations in the efficiency of the modules were 8.49%, 18.88%, 19.74% and 23.57% for the HIT, CIS, mono-Si and poly-Si modules, respectively. The low variation in the efficiency of the HIT module can be attributed to the better operation of this module under arid outdoor conditions, which makes it a promising module for adaptation to the region concerned.

Abstract

In this chapter, we have conducted a statistical study of the annual extreme precipitation (AMP) for 856 grid cells and during the period of 1979–2012 in Algeria. In the first step, we compared graphically the forecasts of the three parameters of the generalized extreme value (GEV) distribution (location, scale and shape) which are estimated by the Spherical model. We used the Cross validation method to compare the two methods kriging and Co-kriging, based on the based on some statistical indicators such as Mean Errors (ME), Root Mean Square Errors (RMSE) and Squared Deviation Ratio (MSDR). The Kriging forecast error map shows low errors expected near the stations, while co-Kriging gives the lowest errors on average at the national level, which means that the method of co-Kriging is the best. From the results of the return periods, we calculate that after 50 years the estimated of the annual extreme precipitation will exceed the maximum AMP is observed in the 33-year.

Purpose

Design/methodology/approach

Findings

Originality/value

The Emergency Shutdown System (ESD) is a type of Safety Instrumented Systems (SIS) used to shut down the system in the event of anomalous conditions, it consists of sensors, logic solvers, and final elements. Reliability databases such as OREDA (Offshore and Onshore Reliability Data) and expert judgment indicate that Emergency Shutdown Valve (ESDV) failures are the most common cause of the unavailability of ESDs. Therefore, proper diagnostic is essential to prevent the failure risks of these valves. ESDV problems are of a different nature and difficult to treat with mathematical models because of their non-linear behavior, the imprecision of information, and the appearance of many failure modes that arise from many failure causes. Therefore, failure diagnostic mechanism based on heuristic knowledge of ESDV parameters must be established. In this paper, the problem of diagnosing ESDV failures is addressed based on the fault-symptom tree model and the Multiple Input-Multiple Output (MIMO) fuzzy inference system. The latter is built on a set of linguistic rules “if-then” provided by the fault-symptom tree model. the proposed approach was applied and verified on an ESDV subsystem in the petrochemical industry.

The concept of equivalent morphology has received much consideration in recent decades. The importance of this concept is reflected in the fact that an inclusion of any morphology can be replaced by a circular one in simulation. If this concept is confirmed, it will facilitate the modeling and simulation of complex configuration microstructures.

To decide on this concept, an in–depth study is carried out in this work, trying to answer it in a clear and definitive way by trying to identify all the possible situations. For this the two types of composites, namely, periodic interpreted by an elementary cell and random interpreted by a Representative Volume Element (RVE) with 200 inclusions are considered. To be sure that the isotropy is provided by the RVE of the periodic microstructure, two types of elementary cells were treated: one circular and the other square. In order to cover all possible situations, the inclusion of the elementary cell is considered with several situations, centered position with different orientations at constant and random steps, random position with orientation at constant steps and random position and orientation at random steps. For each situation, the effective property is determined by the average of 20 cases are processed for elementary cells, while for the large RVE, the properties are obtained by a unit realization. To take into account the effect of contrast, two situations are considered, namely, rigid inclusion case and rigid matrix case. Several results are obtained and given in the conclusion.