The analysis of the failure due to the effect of the propagation of normal and reversed faults with different angles of inclination and by sliding through the Ourkiss dam isstudied numerically. Mainly at the end of construction and at the highest water level, for this purpose the non-linear finite difference method is used considering four fault angles of inclination, activated at the center of the base of the embankment.

The results of the study show that the shear stress values increase with the increase of the vertical base displacement imposed in both conditions of the dam state, and this for both normal and overturned faults.

The analysis of the failure due to the effect of the propagation of normal and reversed faults with different angles of inclination and by sliding through the Ourkiss dam isstudied numerically. Mainly at the end of construction and at the highest water level, for this purpose the non-linear finite difference method is used considering four fault angles of inclination, activated at the center of the base of the embankment.

The results of the study show that the shear stress values increase with the increase of the vertical base displacement imposed in both conditions of the dam state, and this for both normal and overturned faults.

The present work concerns the numerical investigation of reinforced concrete frame buildings containing masonry infill panel under seismic loading that are widely used even in high seismicity areas. In seismic zones, these frames with masonry infill panels are generally considered as higher earthquake risk buildings. As a result there is a growing need to evaluate their level of seismic performance. The numerical modelling of infilled frames structures is a complex task, as they exhibit highly nonlinear inelastic behaviour, due to the interaction of the masonry infill panel and the surrounding frame. The available modelling approaches for masonry infill can be grouped into two principal types; Micro models and Macro models. A two dimensional model of the structure is used to carry out non-linear static analysis. Beams and columns are modelled as non-linear with lumped plasticity where the hinges are concentrated at both ends of the beams and the columns. This study is based on structures with design and detailing characteristics typical of Algerian construction model. In this regard, a non-linear pushover analysis has been conducted on three considered structures, of two, four and eight stories. Each structure is analysed as a bare frame and with two different infill configurations (totally infilled, and partially infilled). The main results that can be obtained from a pushover analysis are the capacity curves and the distribution of plastic hinges in structures. The addition of infill walls results in an increase in both the rigidity and strength of the structures. The results indicate that the presence of non-structural masonry infills can significantly modify the seismic response of reinforced concrete "frames". The initial rigidity and strength of the fully filled frame are considerably improved and the patterns of the hinges are influenced by structural elements type depending on the dynamic characteristics of the structures.

The present work concerns the numerical investigation of reinforced concrete frame buildings containing masonry infill panel under seismic loading that are widely used even in high seismicity areas. In seismic zones, these frames with masonry infill panels are generally considered as higher earthquake risk buildings. As a result there is a growing need to evaluate their level of seismic performance. The numerical modelling of infilled frames structures is a complex task, as they exhibit highly nonlinear inelastic behaviour, due to the interaction of the masonry infill panel and the surrounding frame. The available modelling approaches for masonry infill can be grouped into two principal types; Micro models and Macro models. A two dimensional model of the structure is used to carry out non-linear static analysis. Beams and columns are modelled as non-linear with lumped plasticity where the hinges are concentrated at both ends of the beams and the columns. This study is based on structures with design and detailing characteristics typical of Algerian construction model. In this regard, a non-linear pushover analysis has been conducted on three considered structures, of two, four and eight stories. Each structure is analysed as a bare frame and with two different infill configurations (totally infilled, and partially infilled). The main results that can be obtained from a pushover analysis are the capacity curves and the distribution of plastic hinges in structures. The addition of infill walls results in an increase in both the rigidity and strength of the structures. The results indicate that the presence of non-structural masonry infills can significantly modify the seismic response of reinforced concrete "frames". The initial rigidity and strength of the fully filled frame are considerably improved and the patterns of the hinges are influenced by structural elements type depending on the dynamic characteristics of the structures.

The present work concerns the numerical investigation of reinforced concrete frame buildings containing masonry infill panel under seismic loading that are widely used even in high seismicity areas. In seismic zones, these frames with masonry infill panels are generally considered as higher earthquake risk buildings. As a result there is a growing need to evaluate their level of seismic performance. The numerical modelling of infilled frames structures is a complex task, as they exhibit highly nonlinear inelastic behaviour, due to the interaction of the masonry infill panel and the surrounding frame. The available modelling approaches for masonry infill can be grouped into two principal types; Micro models and Macro models. A two dimensional model of the structure is used to carry out non-linear static analysis. Beams and columns are modelled as non-linear with lumped plasticity where the hinges are concentrated at both ends of the beams and the columns. This study is based on structures with design and detailing characteristics typical of Algerian construction model. In this regard, a non-linear pushover analysis has been conducted on three considered structures, of two, four and eight stories. Each structure is analysed as a bare frame and with two different infill configurations (totally infilled, and partially infilled). The main results that can be obtained from a pushover analysis are the capacity curves and the distribution of plastic hinges in structures. The addition of infill walls results in an increase in both the rigidity and strength of the structures. The results indicate that the presence of non-structural masonry infills can significantly modify the seismic response of reinforced concrete "frames". The initial rigidity and strength of the fully filled frame are considerably improved and the patterns of the hinges are influenced by structural elements type depending on the dynamic characteristics of the structures.

The infill walls are usually considered as nonstructural elements and, thus, are not taken into account in analytical models. However, numerous researches have shown that they can significantly affect the seismic response of the structures. The aim of the present study is to examine the role of masonry infill on the damage response of steel frame without and with various types of openings systems subjected to nonlinear static analysis and nonlinear time history analysis. For the purposes of the above investigation, a comprehensive assessment is conducted using twelve typical types of steel frame without masonry, with full masonry and with different heights and widths of openings. The results revealed that the influence of the successive earthquake phenomenon on the structural damage is larger for the infill buildings compared to the bare structures. Furthermore, when buildings with masonry infill are analyzed for seismic sequences, it is of great importance to account for the orientation of the seismic motion. The nonlinear static response indicated that the opening area has an influence on the maximal strength, the ductility and the initial rigidity of these frames. But the shape of the opening will not influence the global behavior. Then, the nonlinear time history analysis indicates that the global displacement is greatly decreased and even the behavior of the curve is affected by the earthquake intensity when opening is considered.

The infill walls are usually considered as nonstructural elements and, thus, are not taken into account in analytical models. However, numerous researches have shown that they can significantly affect the seismic response of the structures. The aim of the present study is to examine the role of masonry infill on the damage response of steel frame without and with various types of openings systems subjected to nonlinear static analysis and nonlinear time history analysis. For the purposes of the above investigation, a comprehensive assessment is conducted using twelve typical types of steel frame without masonry, with full masonry and with different heights and widths of openings. The results revealed that the influence of the successive earthquake phenomenon on the structural damage is larger for the infill buildings compared to the bare structures. Furthermore, when buildings with masonry infill are analyzed for seismic sequences, it is of great importance to account for the orientation of the seismic motion. The nonlinear static response indicated that the opening area has an influence on the maximal strength, the ductility and the initial rigidity of these frames. But the shape of the opening will not influence the global behavior. Then, the nonlinear time history analysis indicates that the global displacement is greatly decreased and even the behavior of the curve is affected by the earthquake intensity when opening is considered.

The infill walls are usually considered as nonstructural elements and, thus, are not taken into account in analytical models. However, numerous researches have shown that they can significantly affect the seismic response of the structures. The aim of the present study is to examine the role of masonry infill on the damage response of steel frame without and with various types of openings systems subjected to nonlinear static analysis and nonlinear time history analysis. For the purposes of the above investigation, a comprehensive assessment is conducted using twelve typical types of steel frame without masonry, with full masonry and with different heights and widths of openings. The results revealed that the influence of the successive earthquake phenomenon on the structural damage is larger for the infill buildings compared to the bare structures. Furthermore, when buildings with masonry infill are analyzed for seismic sequences, it is of great importance to account for the orientation of the seismic motion. The nonlinear static response indicated that the opening area has an influence on the maximal strength, the ductility and the initial rigidity of these frames. But the shape of the opening will not influence the global behavior. Then, the nonlinear time history analysis indicates that the global displacement is greatly decreased and even the behavior of the curve is affected by the earthquake intensity when opening is considered.

The infill walls are usually considered as nonstructural elements and, thus, are not taken into account in analytical models. However, numerous researches have shown that they can significantly affect the seismic response of the structures. The aim of the present study is to examine the role of masonry infill on the damage response of steel frame without and with various types of openings systems subjected to nonlinear static analysis and nonlinear time history analysis. For the purposes of the above investigation, a comprehensive assessment is conducted using twelve typical types of steel frame without masonry, with full masonry and with different heights and widths of openings. The results revealed that the influence of the successive earthquake phenomenon on the structural damage is larger for the infill buildings compared to the bare structures. Furthermore, when buildings with masonry infill are analyzed for seismic sequences, it is of great importance to account for the orientation of the seismic motion. The nonlinear static response indicated that the opening area has an influence on the maximal strength, the ductility and the initial rigidity of these frames. But the shape of the opening will not influence the global behavior. Then, the nonlinear time history analysis indicates that the global displacement is greatly decreased and even the behavior of the curve is affected by the earthquake intensity when opening is considered.

In this work, the performance of an eccentric annular finned tube heat exchanger under natural convection conditions has been investigated numerically. The objective of the study is to analyse the effect of eccentric coefficient on the rate heat flux as a function of the fin material, diameter, spacing and thicknesses. To perform the numerical simulations, 3D ANSYS FLUENT computational fluid dynamics has been used. The study has been conducted in laminar flow across the single annular finned tube with Rayleigh numbers within of (4 × 10⁴−7 × 10⁴). It is concluded that the eccentricity effect appears better in high thermal conductivity materials with small fin diameter. Regardless of the fin eccentricity, thick fins produce the best heat transfer.

In this work, the performance of an eccentric annular finned tube heat exchanger under natural convection conditions has been investigated numerically. The objective of the study is to analyse the effect of eccentric coefficient on the rate heat flux as a function of the fin material, diameter, spacing and thicknesses. To perform the numerical simulations, 3D ANSYS FLUENT computational fluid dynamics has been used. The study has been conducted in laminar flow across the single annular finned tube with Rayleigh numbers within of (4 × 10⁴−7 × 10⁴). It is concluded that the eccentricity effect appears better in high thermal conductivity materials with small fin diameter. Regardless of the fin eccentricity, thick fins produce the best heat transfer.

In this work, the performance of an eccentric annular finned tube heat exchanger under natural convection conditions has been investigated numerically. The objective of the study is to analyse the effect of eccentric coefficient on the rate heat flux as a function of the fin material, diameter, spacing and thicknesses. To perform the numerical simulations, 3D ANSYS FLUENT computational fluid dynamics has been used. The study has been conducted in laminar flow across the single annular finned tube with Rayleigh numbers within of (4 × 10⁴−7 × 10⁴). It is concluded that the eccentricity effect appears better in high thermal conductivity materials with small fin diameter. Regardless of the fin eccentricity, thick fins produce the best heat transfer.

This paper aims to evaluate the effect of poultry droppings waste on the different life stage of Eisenia fetida earthworm to protect them from hazardous doses. Adults, juveniles and cocoons were exposed during 90 days to increased doses of poultry droppings (0, 10, 20, 50 and 100 g), added to 250 g of culture substrate. The biological parameters, like mortality, body length, fresh biomass, and cocoons hatching were affected by the organic waste doses and the exposure time. Both poultry droppings doses 10 g (4%) and 20 g (8%) were the less toxic to the cocoons hatching and to the adults' and juveniles' growth. While the two doses, 50 g (20%) and 100 g (40%), had a negative impact on the cocoon hatchability and a toxic effect on the juveniles and adults. Otherwise, the poultry droppings dose 100 g was lethal for the all life stage of E. fetida.

This paper aims to evaluate the effect of poultry droppings waste on the different life stage of Eisenia fetida earthworm to protect them from hazardous doses. Adults, juveniles and cocoons were exposed during 90 days to increased doses of poultry droppings (0, 10, 20, 50 and 100 g), added to 250 g of culture substrate. The biological parameters, like mortality, body length, fresh biomass, and cocoons hatching were affected by the organic waste doses and the exposure time. Both poultry droppings doses 10 g (4%) and 20 g (8%) were the less toxic to the cocoons hatching and to the adults' and juveniles' growth. While the two doses, 50 g (20%) and 100 g (40%), had a negative impact on the cocoon hatchability and a toxic effect on the juveniles and adults. Otherwise, the poultry droppings dose 100 g was lethal for the all life stage of E. fetida.

This paper aims to evaluate the effect of poultry droppings waste on the different life stage of Eisenia fetida earthworm to protect them from hazardous doses. Adults, juveniles and cocoons were exposed during 90 days to increased doses of poultry droppings (0, 10, 20, 50 and 100 g), added to 250 g of culture substrate. The biological parameters, like mortality, body length, fresh biomass, and cocoons hatching were affected by the organic waste doses and the exposure time. Both poultry droppings doses 10 g (4%) and 20 g (8%) were the less toxic to the cocoons hatching and to the adults' and juveniles' growth. While the two doses, 50 g (20%) and 100 g (40%), had a negative impact on the cocoon hatchability and a toxic effect on the juveniles and adults. Otherwise, the poultry droppings dose 100 g was lethal for the all life stage of E. fetida.

This paper aims to evaluate the effect of poultry droppings waste on the different life stage of Eisenia fetida earthworm to protect them from hazardous doses. Adults, juveniles and cocoons were exposed during 90 days to increased doses of poultry droppings (0, 10, 20, 50 and 100 g), added to 250 g of culture substrate. The biological parameters, like mortality, body length, fresh biomass, and cocoons hatching were affected by the organic waste doses and the exposure time. Both poultry droppings doses 10 g (4%) and 20 g (8%) were the less toxic to the cocoons hatching and to the adults' and juveniles' growth. While the two doses, 50 g (20%) and 100 g (40%), had a negative impact on the cocoon hatchability and a toxic effect on the juveniles and adults. Otherwise, the poultry droppings dose 100 g was lethal for the all life stage of E. fetida.

Owing to the comeback of small-scale models, this paper presents results of an experimental study based on the effect of underground circular voids on strip footing placed on the edge of a cohesionless slope and subjected to eccentric loads. The bearing capacity-settlement relationship of footing on the slope and impact of diverse variables are expressed using dimensionless parameters such as the top vertical distance of the void from the base of footing, horizontal space linking the void-footing centre, and load eccentricity. The results verified that the stability of strip footing is influenced by the underground void, as well as the critical depth between the soil and top layer of the void. The critical horizontal distance between the void and the centre was also affected by the underground void. Furthermore, the results also verified that the influence of the void appeared insignificant when it was positioned at a depth or eccentricity equal to twice the width of footing.    

Owing to the comeback of small-scale models, this paper presents results of an experimental study based on the effect of underground circular voids on strip footing placed on the edge of a cohesionless slope and subjected to eccentric loads. The bearing capacity-settlement relationship of footing on the slope and impact of diverse variables are expressed using dimensionless parameters such as the top vertical distance of the void from the base of footing, horizontal space linking the void-footing centre, and load eccentricity. The results verified that the stability of strip footing is influenced by the underground void, as well as the critical depth between the soil and top layer of the void. The critical horizontal distance between the void and the centre was also affected by the underground void. Furthermore, the results also verified that the influence of the void appeared insignificant when it was positioned at a depth or eccentricity equal to twice the width of footing.    

Owing to the comeback of small-scale models, this paper presents results of an experimental study based on the effect of underground circular voids on strip footing placed on the edge of a cohesionless slope and subjected to eccentric loads. The bearing capacity-settlement relationship of footing on the slope and impact of diverse variables are expressed using dimensionless parameters such as the top vertical distance of the void from the base of footing, horizontal space linking the void-footing centre, and load eccentricity. The results verified that the stability of strip footing is influenced by the underground void, as well as the critical depth between the soil and top layer of the void. The critical horizontal distance between the void and the centre was also affected by the underground void. Furthermore, the results also verified that the influence of the void appeared insignificant when it was positioned at a depth or eccentricity equal to twice the width of footing.    

Recently and due to the impressive growth in the amounts of transmitted data over the heterogeneous sensor networks and the emerged related technologies especially the Internet of Things in which the number of the connected devices and the data consumption are remarkably growing, big data has emerged as a widely recognized trend and is increasingly being talked about. The term big data is not only about the volume of data, but also refers to the high speed of transmission and the wide variety of information that is difficult to collect, store and process using the available classical technologies. Although the generated data by the individual sensors may not appear to be significant, all the data generated through the many sensors in the connected sensor networks are able to produce large volumes of data. Big data management imposes additional constraints on the wireless sensor networks and especially on the data aggregation process, which represents one of the essential paradigms in wireless sensor networks. Data aggregation process can represent a solution to the problem of big data by allowing data from different sources to be combined to eliminate the redundant ones and consequently reduce the amounts of data and the consumption of the available resources in the network. The main objective of this work is to propose a new approach for supporting big data in the data aggregation process in heterogeneous wireless sensor networks. The proposed approach aims to reduce the data aggregation cost in terms of energy consumption by balancing the data loads on the heterogeneous nodes. The proposal is improved by integrating the feedback control closed loop to reinforce the balance of the data aggregation load on the nodes, maintaining therefore an optimal delay and aggregation time.