Induction generator with direct field oriented control is preferred for high performance applications due to its excellent dynamic behavior. The accuracy for the dual star induction generator control in the remote area highly depends on estimating the undetectable machine parameter values, such as the magnetizing inductance and flux. The aim of this paper is to propose a novel direct rotor flux oriented control with online estimation of magnetizing current, which applied to stand alone dual star induction generator supplying a wind turbine in remote area. The induction generator is connected to nonlinear load through two PWM rectifiers. The results of the proposed technique based on the magnetizing inductance estimation that used to control of induction generator shows an importance to determine the rotor flux position.

Since the work of Lotfi Zadeh in 1965, the fuzzy logic continues to interest researchers and industrialists who gather around the "theories of uncertainty". The ramifications of fuzzy logic extend to fields as varied as control, the diagnosis of complex systems, bioinformatics, decision support. Research work is done in bio-informatic field where a system for decision support of anesthetic depth fuzzy basic. This study was carried out under general anesthesia with propofol. We use in our work some parameters influencing the patient’s condition during the course of surgery to control their effects on the depth of general anesthesia by fuzzy logic. In this paper, we propose using the environment MatLab R2017a to realize this application. A comparison between the predictions of the anesthesiologist and anesthetic predictions according to fuzzy logic of our work is done. This study will serve as a guide in developing new anesthesia control systems for patients.

The main purpose of this paper is to integrate fuzzy logic technique and backstepping synthesis to sliding mode control to develop a Fuzzy Backstepping-Sliding Mode Controller (FBSMC) to resolve the problem of altitude and attitude tracking control of unmanned quadrotor systems under large external disturbances. First, a backstepping-sliding mode control for quadrotor is introduced. Moreover, a fuzzy logic system is employed to adapt the unknown switching gains to eliminate the chattering phenomenon induced by switching control on the conventional Backstepping-Sliding Mode Controller (BSMC). The dynamical motion equations are obtained by EulerNewton formalism. The stability of the system is guaranteed in the sense of the Lyapunov stability theorem. Simulation results are carried out using Matlab/Simulink environment to illustrate the effectiveness and robustness of the proposed controller.

The main purpose of this paper is to integrate fuzzy logic technique and backstepping synthesis to sliding mode control to develop a Fuzzy Backstepping-Sliding Mode Controller (FBSMC) to resolve the problem of altitude and attitude tracking control of unmanned quadrotor systems under large external disturbances. First, a backstepping-sliding mode control for quadrotor is introduced. Moreover, a fuzzy logic system is employed to adapt the unknown switching gains to eliminate the chattering phenomenon induced by switching control on the conventional Backstepping-Sliding Mode Controller (BSMC). The dynamical motion equations are obtained by Euler-Newton formalism. The stability of the system is guaranteed in the sense of the Lyapunov stability theorem. Simulation results are carried out using Matlab/Simulink environment to illustrate the effectiveness and robustness of the proposed controller.

Security is one of the major challenges in the design and implementation of protocols for mobile ad hoc networks (MANETs). In such systems, the cooperation between nodes is one of the important principles being followed in the current research works to formulate various security protocols. Many existing works assume that mobile nodes will follow prescribed protocols without deviation. However, this is not always the case, because these networks are subjected to a variety of malicious attacks. Since there are various models of attack, trust routing scheme can guarantee security and trust of the network. The purpose of this paper is to propose a novel trusted routing model for mitigating attacks in MANETs.

In this paper, we propose a potential high efficiency Cu2ZnSn(S,Se)4/CdS (CZTS) solar cell design based on graded band-gap engineering that can offer the benefits of improved absorption behavior and reduced recombination effects. Moreover, a new hybrid approach based on analytical modeling and Particle Swarm Optimization (PSO) is proposed to determinate the optimal band-gap profile of the amended CZTS absorber layer to achieve further efficiency enhancement. It is found that the proposed design exhibits superior performance, where a high efficiency of 16.9% is recorded for the optimized solar cell with a relative improvement of 92%, compared with the reference cell efficiency of 8.8%. Likewise, the optimized CZTS solar cell with a graded band-gap enables achieving a higher open circuit voltage of 889 mV, a short-circuit current of 28.5 mA and a fill factor of 66%. Therefore, the optimized CZTS-based solar cell with graded-band gap paradigm pinpoints a new path toward recording high-efficiency thin-film solar cells through enhancing carrier collection and reducing the recombination rate.

In this paper, a graded channel doping paradigm is proposed to improve the nanoscale double gate junctionless DGJL MOSFET electrical performance. A careful mechanism study based on numerical investigation and a performance comparison between the proposed and conventional design is carried out. The device figures-of-merit, governing the switching and leakage current behavior are investigated in order to reveal the transistor electrical performance for ultra-low power consumption. It is found that the channel doping engineering feature has a profound implication in enhancing the device electrical performance. Moreover, the impact of the high-k gate dielectric on the device leakage performance is also analyzed. The results show that the proposed design with gate stacking demonstrates superior ION/IOFF ratio and lower leakage current as compared to the conventional counterpart. Our analysis highlights the good ability of the proposed design including a high-k gate dielectric for the reduction of the leakage current. These characteristics underline the distinctive electrical behavior of the proposed design and also suggest the possibility for bridging the gap between the high derived current capability and low leakage power. This makes the proposed GCD-DGJL MOSFET with gate stacking a potential alternative for high performance and ultra-low power consumption applications.