Publications by Year: 2017

2017
Zermane H, Mouss H-L, Oulmi T, Hemal S. New fuzzy-Based Process Control System for a bag filter of a cement factory. 6th International Conference on Systems and Control (ICSC) [Internet]. 2017. Publisher's VersionAbstract

During the last years, in industrial process control, requirements for Continuous Emission Monitoring (CEM) have increased significantly. Most plants are investing in CEM systems in order to burn waste, obtain ISO 14000 and 18001 certification to protect operator's life. In this work, our approach describes development of a novel internet and fuzzy-based CEM system (IFCEMS). This system contains operator's stations for the bag filter's automation system and monitored using Internet. The object of the present installation consists of a suction ventilator, a bag filter and a system for collecting and evacuating the dust. To optimize the running of the bag filter workshop and ensure continuous control, the process based on one of the most powerful Artificial Intelligence techniques which is fuzzy logic involves the removal or filtration of smoke from the kiln and/or cement mill with control of temperature and pressure of the fumes.

Sonia B. Entérobactéries urinaires productrices de biofilm et antibiofilmogramme. Congrès de RICAI. 2017.
GHOGGALI S, OUTTAS T, LATRECHE S. 3D Finite Elements Modeling of the Interfacial Stresses Bone/Dental Implant - Effects of the Geometric ParameterS. Journal of Biomimetics, Biomaterials and Biomedical EngineeringJournal of Biomimetics, Biomaterials and Biomedical Engineering. 2017;Vol. 33.Abstract
A successful osseointegration involves the simultaneous optimization of the primary stability of the implant and the minimization of interfacial stresses bone - implant. In this context, the modeling of these stresses reports a great interest for researchers in last decades.The aim of this work is to study the effects of geometric parameters of a new model of titanium dental implant on the evolution of interfacial stresses bone /implant. For this, a dental implant of the second premolar in the lower jaw was considered, with different diameters, thread pitches and different thread forms. The profile of the interfacial stresses was presented for each case study, the results show a great similarity in the areas concerned, cortical bone, threaded region and cancellous bone, with the results obtained in the literature for other types of geometries.
Ghoggali S, Toufik O, Latrèche S. 3D Finite Elements Modeling of the Interfacial Stresses Bone/Dental Implant-Effects of the Geometric Parameters. Journal of Biomimetics, Biomaterials and Biomedical EngineeringJournal of Biomimetics, Biomaterials and Biomedical Engineering. 2017;33 :32-44.
Belkacem MA. Acquisition de la morphographie flexionnelle au Secondaire. DidactiquesDidactiques. 2017;6 :206-227.
Mazouz F, Belkacem S, Harbouche Y, Abdessemed R, Ouchen S. Active and Reactive Power Control of a DFIG For Variable Speed Wind Energy Conversion. 6th International conference on system and control, IEEE, (ICSC), Batna-Algeria, May, 7-96th International conference on system and control, IEEE, (ICSC), Batna-Algeria, May, 7-9. 2017.
Mazouz F, Belkacem S, Harbouche Y, Abdessemed R, Ouchen S. Active and reactive power control of a DFIG for variable speed wind energy conversion. 6th International Conference on Systems and Control (ICSC) [Internet]. 2017. Publisher's VersionAbstract

In this paper, we propose a vector control of a doubly fed induction generator (DFIG) for variable speed wind power generation. The model is developed based on the dual powered generator for the control of the active and reactive powers. Several studies are carried out to test their operation under different wind conditions. The results have shown good performances of the wind energy converter system operate under wind variations with indirect vector control strategies.

Aouachria S, Boumerfeg S, Benslama A, Benbacha F, GUEMMEZ THORAYA, Khennouf S, Arrar L, Baghiani A. Acute, sub-acute toxicity and antioxidant activities (in vitro and in vivo) of Reichardia picroide crude extract. Journal of ethnopharmacologyJournal of ethnopharmacology. 2017;208 :105-116.
Benkhalifa J, Léon JF, CHAABANE MABROUK. Aerosol optical properties of Western Mediterranean basin from multi-year AERONET data. Journal of Atmospheric and Solar-Terrestrial PhysicsJournal of Atmospheric and Solar-Terrestrial Physics. 2017;164 :222-228.
Boultif M, BENMESSAOUD H. AGIS-BASED METHODOLOGYFOR DROUGHTVULNERABILITY MODELLING: APPLICATIONATTHE REGION OFELHODNA, CENTRAL ALGERIA. Lebanese Science JournalLebanese Science Journal. 2017;18 :53.
Naima G, Mahamdi R, Ibrahim R. An algorithm For Boron diffusion in MOS transistor Using SILVACO ATHENA and Matlab. Phosphorus, Sulfur, and Silicon and the Related Elements [Internet]. 2017;193 (2). Publisher's VersionAbstract

In this paper we have developed an algorithm of boron diffusion after thermal annealing in a highly doped polysilicon film. This algorithm takes into account electrically active point defects by associating some parameters such as boron solubility limit and diffusion coefficient. We have studied effect of annealing temperature in order to perform impact of this parameter on maximum depth diffusion of junction and maximum of concentration by analysis of Secondary Ion Mass Spectrometry (SIMS) profiles. In fact we have proposed numerical model based on Fick's equation, resolved by finite difference method under Matlab also we have simulated this phenomenon by Silvaco software.

Lotfi M, Zohir D. Analog Behavioral Modeling of Schottky Diode Using Spice. Journal of Nano-and Electronic PhysicsJournal of Nano-and Electronic Physics. 2017;9 :1002-1.
Tafsast A. Analyse d&⋕39;image médicale par des méthodes de regroupements : Application en cancérologie. 2017.
Besma B. Analyse et simulation des performances des cellules solaires en couches minces à base de CZTS. 2017.
Aouissi M, Titaouine M, de SOUSA TR, Adoui I, Neto AG, Baudrand H. Analysis of a joined split-ring FSS structure characterized by three resonant frequencies and a tuned enhanced band using the WCIP method. Turkish Journal of Electrical Engineering & Computer SciencesTURKISH JOURNAL OF ELECTRICAL ENGINEERING & COMPUTER SCIENCES. 2017;25 :2885-2896.
Mounir A, Sellami D, Naceri F. Analysis of Wireless Data Transmission for the Site Survey of Telemetry Systems Projects. Abu Dhabi International Petroleum Exhibition & Conference, November [Internet]. 2017. Publisher's VersionAbstract

This paper aim is to propose a radio transmission analysing method for the site survey of telemetry systems (e.g., SCADA: Supervisory Control And Data Acquisition), these systems are usually used to supervise remote process installations in large oil and gas fields. This method is presented over a software design and development which includes all radio propagation data and calculations, needed during the technical site survey phase of a telemetry system project execution. The approach is applied for the acquisition, control and online modeling of an oil collection pipeline network using a SCADA system.

The designed software we named "SCADA Radio Transmission," is to perform the radio propagation analysis. By introducing data (topographic coordinates, obstacles heights and characteristics data of the transmission equipment) it allows calculation of towers heights that ensure good radio clearance (Fresnel Zone), plot of the radio transmission link and to visulize results of the radio link budget. Complete calculations equations of this software are provided with detailed radio propagation analysis sample results of the studied oil collection pipeline network, to permit more comprehension for readers. The designed software role is to:

 

  • determine the correct height of the towers by inserting the topographical data of the field, thus providing a radio clearance of the Fresnel first ellipsoid;

  • Draw up, for the established link, a link budget including the received signal power as well as the margin against the reception threshold;

  • In addition, this software allows the adjustment of the pylons heights in order to rectify any diffraction, due to bad visibility hop.

 

A case study application of this software is presented for the data acquisition, control and online modeling of an oil collection pipeline network at Hassi Messaoud oilfield.

Aouadj M, Sellami D, Naceri F, Aissi S. Analysis of wireless data transmission for the site survey of telemetry systems projects. Abu Dhabi International Petroleum Exhibition & Conference. 2017.
Saadi R, Baheddi M, Ferhoune N. Analytical approach of the arching dual effect describing the stability of slurry-wall trenches in cohesionless soil. International Journal of GeomechanicsInternational Journal of Geomechanics. 2017;17 :04017081.
Khaldi S, Dibi Z. ANN TECHNIQUE FOR ELECTRONIC NOSE BASED ON SMART SENSORS ARRAY. UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES C-ELECTRICAL ENGINEERING AND COMPUTER SCIENCEUNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES C-ELECTRICAL ENGINEERING AND COMPUTER SCIENCE. 2017;79 :85-96.
Benamar S. Antibiofilmogramme : un test innovant pour un traitement personnalisé des entérobactéries urinaires productrices de biofilm. 37e Réunion Interdisciplinaire de Chimiothérapie Anti-Infectieuse (RICAI 2017), les 18 - 19 Décembre [Internet]. 2017. Publisher's Version

Pages