Risk mapping is the foundation of the risk prevention strategy. It allows for the understanding of all factors that may affect the activities. It is a collective decision based on negotiation between the actors. Argument-based negotiation accelerates the negotiation process and converges it toward a final and common decision. It is in this context that this paper aims to illustrate the contribution of the improved PCA and AHP tools, considered as arguments, to the classification of major accident risks.

Purpose The purpose of this paper is to propose a new managerial method to integrate the environmental dimension in the domino effects (DEs) analysis. Design/methodology/approach The proposed method is a three-step approach: identification of primary hazards in the form of potential events causing the DE, a mixed quantification (deterministic and probabilistic) of the risk of the DEs with a view to its control and capitalizing the results from the BLEVESOFT software as well as those relating to the probability of occurrence of the DEs in the form of a prioritized action plan dedicated to surrounding environments (proximity territory). Findings The primary hazards are technologically manageable at the studied system but are unpredictable if triggered at the environmental subsystem because they are difficult to be managed and often cause panic, which is a form of a very catastrophic DE. Research limitations/implications The research could affect members of the engineering and construction industry, and can be applied in several domains since it studies the DE phenomenon. which is a common problem especially in industrials plants. Practical implications The proposal method is applied in an industrial terminal in Algeria. Originality/value This paper presents an exploratory study of using a new managerial method that aims to combine the potentialities of geomatic sciences that allow the spatial representation of nearby territories to assess the severity of DEs through a deterministic approach, and the modeling of DEs as well as their analysis by a probabilistic approach.

Using a risk matrix for Risk mapping constitutes the basis of risk management strategy. It aims to classify the identified risks with regards to their management and control. This risk classification, which is based on the frequency and the severity dimensions, is often carried out according to a procedure founded on experts’ judgments. In order to overcome the subjectivity bias of this classification, this paper presents the contribution of the Principal Components Analysis (PCA) method: an exploratory method for graphing risks based on factors that allow a better visualized classification of scenarios accidents. Still, the commonly encountered problem in the data classified by the PCA method resides in the main factors of classification; we judged useful to frame these letters by an algebraic formulation to make an improvement of this classification possible. The obtained results show that the suggested method is a promising alternative to solve the recurring problems of risk matrices, notably in accident scenarios’ classification.

Purpose For many years, the concept of safety culture has attracted researchers from all over the world, and more particularly in the area of healthcare services. The purpose of this paper is to measure safety culture dimensions in order to improve and promote healthcare in Algeria. Design/methodology/approach The used approach consists of getting a better understanding of healthcare safety culture (HSC) by measuring the perception of healthcare professionals in order to guide promotion actions. For this, the Hospital Survey on Patient Safety Culture questionnaire was used in a pilot hospital setting where it was distributed on a number of 114 health professionals chosen by stratified random sampling. Findings The results showed that the identified priority areas for HSC improvement help in establishing a trust culture and a non-punitive environment based on the system and not on the individual. Originality/value Safety is recognized as a key aspect of service quality, thus measuring the HSC can help establish an improvement plan. In Algerian health facilities, this study is considered the first to examine perceptions in this particular area. The current results provide a baseline of strengths and opportunities for healthcare safety improvement, allowing the managers of this type of facilities to take steps that are more effective.

In this paper, an iterative technique, employing the T formulation associated with the finite element method, based on Maxwell’s equations and the Biot-savart law, is used for analyzing the density of eddy currents in composite carbon fiber reinforced polymer (CFRP) materials. For this purpose, a code has been developed for solving an electromagnetic 3D non-destructive evaluation problem. This latter permits the characterization of this CFRP and determinate of fibers orientation using the impedance variation which is implanted in polar diagram. Firstly, the obtained results are compared with those of the analytical model. This comparison reveals a high concordance which proves the validity of the proposed method. Secondly, three different applications are shown for illustrating the characterization of unidirectional, bidirectional and multidirectional piece using a rectangular coil plotted in normalized impedance diagram.

This paper presents a fuzzy logic controller destined to the doubly-fed induction motor (DFIM) speed controlling. It solves the problems associated with the conventional IP (Integral Proportional) controller. This fuzzy logic controller is based on the decoupling control to enhance robustness under different operating conditions such as load torque and in the presence of parameters variation. The simulation results for various scenarios show the high performances of the proposed control in terms of piloting effectiveness, precision, rapidity and stability for the high powers DFIM operating at variable speeds.

This article presents a study of a Multi-coils circular eddy current non-destructive testing sensor for determining the fibers orientation as well as the detection of defect in multidirectional carbon fibers reinforced polymer (CFRP). The developed sensor contains 16 rectangular coils connected in series and supplied by a single-phase sinusoidal source. This sensor allows the annulations of the mechanical rotation of the conventional sensors and it permits to reduce the inspection procedure duration. The electromagnetic phenomena are calculated by using 3D finite element method (FEM) based on the electromagnetic AV-A formulation. Finally, the Multi-coils circular sensor responses are analyzed through polar diagrams of the impedance variation, where the defect is taken into consideration. A great concordance between the obtained results and those of literatures has been noticed. The provided results show that the proposed sensor allows an efficient characterization of multidirectional CFRP and detection of defects in different layers.

This paper presents a new modeling approach of eddy current nondestructive evaluation systems containing magnetic materials. Originally, the proposed model is based on coupled circuits principle and the notion of equivalent current density. In order to make the model homogenous, we consider the current density as a state variable since this density is compatible with the representation of the magnetisation by equivalent currents. By introducing the fictitious electric conductivity approach, the sensor impedance is expressed according to magnetic tube or plate characteristics such as electric conductivity and magnetic permeability. An excellent concordance is achieved by comparing the calculated results to those of analytical ones. Regarding the mesh simplicity and the fast calculation, this method is very adapted for the resolution of the inverse problems for real time evaluation of the properties of magnetic materials.

This study presents analysis, control and comparison of three hybrid approaches for the direct torque control (DTC) of the dual star induction motor (DSIM) drive. Its objective consists of combining three different heuristic optimization techniques including PID-PSO, Fuzzy-PSO and GA-PSO to improve the DSIM speed controlled loop behavior. The GA and PSO algorithms are developed and implemented into MATLAB. As a result, fuzzy-PSO is the most appropriate scheme. The main performance of fuzzy-PSO is reducing high torque ripples, improving rise time and avoiding disturbances that affect the drive performance.

This paper deals with a nonlinear adaptive control design based on synergetic control, which also uses fuzzy systems to approximate the dynamics of nonlinear systems. The stability of the closed-loop system is ensured by the Lyapunov synthesis in the sense that all the signals are bounded, and the controller parameters adjusted by adaptation laws. The proposed algorithm is applied to an inverted pendulum to track a sinusoidal reference trajectory. Simulations and discussion are presented to illustrate the new robust adaptive fuzzy synergetic control described in this work.

In this paper, we are interested in the adaptive fuzzy control a technique has been studied and applied, namely adaptive fuzzy control based on theory of Lyapunov. The system based on the stability theory is used to approximate the gains ke and kdce to ensure the stability of the control in particular time, simulations results obtained by using MATLAB environment gives that the fuzzy adaptive control more robust, also it has superior dynamics performances. The results and test of robustness will be presented.

This paper deals with the robust power control of a grid-connected brushless doubly-fed induction generator (BDFIG) driven by the variable speed wind turbine. With the using of a super twisting algorithm which is a high-order sliding mode controller (HOSMC). This approach guarantees both the dynamic performance and the same robustness as traditional first order (SMC) algorithm and reduces the chattering phenomenon, which is the biggest disadvantage in the implementation of this technique. The developed algorithm relies on the decoupling control by implementing the strategy of oriented grid flux vector control. In order to enhance the desired performances, an attempt is made by controlling the generated stator active and reactive powers in a linear and decoupled manner to ensure the global asymptotical stability, HOSMC approach is implemented. Therefore, an optimal operation of the BDFIG in sub-synchronous operation is used in addition to the stator power flows where the stator power factor is kept in a unity. The suggested method is examined with the Matlab/Simulink software. The performances and the feasibility of the designed control are illustrated by simulation results.

In this investigation, a new simple triangular strain based membrane element with drilling rotation for 2-D structures analysis is proposed. This new numerical model can be used for linear and dynamic analysis. The triangular element is named SBTE and it has three nodes with three degrees of freedom at each node. The displacements field of this element is based on the assumed functions for the various strains satisfying the compatibility equations. This developed element passed both patch and benchmark tests in the case of bending and shear problems. For the dynamic analysis, lumped mass with implicit/explicit time integration are employed. The obtained numerical results using the developed element converge toward the analytical and numerical solutions in both analyses.

In this work we present a new biomimetic disc prosthesis imitating the fibroreinforced osmotic, and viscoelastic properties of the biological intervertebral disc (BID). For this, we proposed to study the second-generation biomimetic prosthesis "the M6-C prosthesis" which contains two metal plates, a core and a fiber fabric. First, a 3D model was established, the finite element analysis (FEA) under the ANSYS©2015 was conducted. Secondly, a biomimetic material, the silicone rubber, was compared with the polyethylene to find the material that mimics the behavior of a biological disk. Finally, the analysis of the results found the polymer has the same mechanical properties as the nucleus pulposus, in particular the viscoelastic behaviour compared with that of polyethylene

 Breast cancer is a multifactorial disease; several socioeconomic, food factors and lifestyle are incriminated in its development. It is the first cancer of women in the world and in Algeria, in terms of incidence and mortality. In Batna, the standardized incidence has doubled, from 13.6 in 2001 to 25.3 in 2011. OBJECTIVE The main objective is to study the dietary risk factors associated with the occurrence of breast cancer in women in the region of Batna. METHODS A case-control study with 1-1 matching by age and address was conducted from January 1st, 2013 to December 31rd, 2014. The total sample consisted of 160 women. RESULTS Eating fast-food every day increases the risk of breast cancer by 7 times as well as fat from red meat. Consumption of sausage and poultry skin by 5 times. Cooking vegetables in sauce increases the risk by 5 times (p <0.0001), Taking olive oil each day reduces the risk of 25% with a p <0.02, the consumption of milk mixed or not with coffee reduces the risk of one third and the fact of nibbling rarely reduced it with OR = 0,117 (0,023- 0.59) p = 0.009. DISCUSSION The associations between dietary risk factors and breast cancer are discordant in the various studies carried out in the world, our results are in line with studies but require further research